The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. After each decennial census, the Census Bureau delineates urban areas that represent densely developed territory, encompassing residential, commercial, and other nonresidential urban land uses. In general, this territory consists of areas of high population density and urban land use resulting in a representation of the "urban footprint." There are two types of urban areas: urbanized areas (UAs) that contain 50,000 or more people and urban clusters (UCs) that contain at least 2,500 people, but fewer than 50,000 people (except in the U.S. Virgin Islands and Guam which each contain urban clusters with populations greater than 50,000). Each urban area is identified by a 5-character numeric census code that may contain leading zeroes.

The 2010 Census Production Settings Demographic and Housing Characteristics (DHC) Demonstration Noisy Measurement File (2023-06-30) is an intermediate output of the 2020 Census Disclosure Avoidance System (DAS) TopDown Algorithm (TDA) (as described in Abowd, J. et al [2022] https://doi.org/10.1162/99608f92.529e3cb9 , and implemented in https://github.com/uscensusbureau/DAS_2020_Redistricting_Production_Code). The NMF was produced using the official “production settings,” the final set of algorithmic parameters and privacy-loss budget allocations, that were used to produce the 2020 Census Redistricting Data (P.L. 94-171) Summary File and the 2020 Census Demographic and Housing Characteristics File. The NMF consists of the full set of privacy-protected statistical queries (counts of individuals or housing units with particular combinations of characteristics) of confidential 2010 Census data relating to the 2010 Demonstration Data Products Suite – Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File – Production Settings (2023-04-03). These statistical queries, called “noisy measurements” were produced under the zero-Concentrated Differential Privacy framework (Bun, M. and Steinke, T [2016] https://arxiv.org/abs/1605.02065; see also Dwork C. and Roth, A. [2014] https://www.cis.upenn.edu/~aaroth/Papers/privacybook.pdf) implemented via the discrete Gaussian mechanism (Cannone C., et al., [2023] https://arxiv.org/abs/2004.00010), which added positive or negative integer-valued noise to each of the resulting counts. The noisy measurements are an intermediate stage of the TDA prior to the post-processing the TDA then performs to ensure internal and hierarchical consistency within the resulting tables. The Census Bureau has released these 2010 Census demonstration data to enable data users to evaluate the expected impact of disclosure avoidance variability on 2020 Census data. The 2010 Census Production Settings Demographic and Housing Characteristics (DHC) Demonstration Noisy Measurement File (2023-04-03) has been cleared for public dissemination by the Census Bureau Disclosure Review Board (CBDRB-FY22-DSEP-004).

The 2010 Census Production Settings Demographic and Housing Characteristics Demonstration Noisy Measurement File includes zero-Concentrated Differentially Private (zCDP) (Bun, M. and Steinke, T [2016]) noisy measurements, implemented via the discrete Gaussian mechanism. These are estimated counts of individuals and housing units included in the 2010 Census Edited File (CEF), which includes confidential data initially collected in the 2010 Census of Population and Housing. The noisy measurements included in this file were subsequently post-processed by the TopDown Algorithm (TDA) to produce the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) (https://www2.census.gov/programs-surveys/decennial/2020/program-management/data-product-planning/2010-demonstration-data-products/04-Demonstration_Data_Products_Suite/2023-04-03/). As these 2010 Census demonstration data are intended to support study of the design and expected impacts of the 2020 Disclosure Avoidance System, the 2010 CEF records were pre-processed before application of the zCDP framework. This pre-processing converted the 2010 CEF records into the input-file format, response codes, and tabulation categories used for the 2020 Census, which differ in substantive ways from the format, response codes, and tabulation categories originally used for the 2010 Census.

The NMF provides estimates of counts of persons in the CEF by various characteristics and combinations of characteristics including their reported race and ethnicity, whether they were of voting age, whether they resided in a housing unit or one of 7 group quarters types, and their census block of residence after the addition of discrete Gaussian noise (with the scale parameter determined by the privacy-loss budget allocation for that particular query under zCDP). Noisy measurements of the counts of occupied and vacant housing units by census block are also included. Lastly, data on constraints—information into which no noise was infused by the Disclosure Avoidance System (DAS) and used by the TDA to post-process the noisy measurements into the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) —are provided.

This data collection contains summary statistics on population and housing subjects derived from the responses to the 2010 Census questionnaire. Population items include sex, age, average household size, household type, and relationship to householder such as nonrelative or child. Housing items include tenure (whether a housing unit is owner-occupied or renter-occupied), age of householder, and household size for occupied housing units. Selected aggregates and medians also are provided. The summary statistics are presented in 71 tables, which are tabulated for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature), including, but not limited to, regions, divisions, states, metropolitan/micropolitan areas, counties, county subdivisions, places, ZIP Code Tabulation Areas (ZCTAs), school districts, census tracts, American Indian and Alaska Native areas, tribal subdivisions, and Hawaiian home lands. There are 10 population tables shown down to the county level and 47 population tables and 14 housing tables shown down to the census tract level. Every table cell is represented by a separate variable in the data. Each table is iterated for up to 330 population groups, which are called "characteristic iterations" in the Census Bureau's nomenclature: the total population, 74 race categories, 114 American Indian and Alaska Native categories, 47 Asian categories, 43 Native Hawaiian and Other Pacific Islander categories, and 51 Hispanic/not Hispanic groups. Moreover, the tables for some large summary areas (e.g., regions, divisions, and states) are iterated for portions of geographic areas ("geographic components" in the Census Bureau's nomenclature) such as metropolitan/micropolitan statistical areas and the principal cities of metropolitan statistical areas. The collection has a separate set of files for every state, the District of Columbia, Puerto Rico, and the National File. Each file set has 11 data files per characteristic iteration, a data file with geographic variables called the "geographic header file," and a documentation file called the "packing list" with information about the files in the file set. Altogether, the 53 file sets have 110,416 data files and 53 packing list files. Each file set is compressed in a separate ZIP archive (Datasets 1-56, 72, and 99). Another ZIP archive (Dataset 100) contains a Microsoft Access database shell and additional documentation files besides the codebook. The National File (Dataset 99) constitutes the National Update for Summary File 2. The National Update added summary levels for the United States as a whole, regions, divisions, and geographic areas that cross state lines such as Core Based Statistical Areas.

Population estimates by the U.S. Census Bureau by U.S. Census Block.

The 2010 Census Production Settings Redistricting Data (P.L. 94-171) Demonstration Noisy Measurement File (2023-04-03) is an intermediate output of the 2020 Census Disclosure Avoidance System (DAS) TopDown Algorithm (TDA) (as described in Abowd, J. et al [2022] https://doi.org/10.1162/99608f92.529e3cb9 , and implemented in https://github.com/uscensusbureau/DAS_2020_Redistricting_Production_Code). The NMF was produced using the official “production settings,” the final set of algorithmic parameters and privacy-loss budget allocations, that were used to produce the 2020 Census Redistricting Data (P.L. 94-171) Summary File and the 2020 Census Demographic and Housing Characteristics File.

The NMF consists of the full set of privacy-protected statistical queries (counts of individuals or housing units with particular combinations of characteristics) of confidential 2010 Census data relating to the redistricting data portion of the 2010 Demonstration Data Products Suite – Redistricting and Demographic and Housing Characteristics File – Production Settings (2023-04-03). These statistical queries, called “noisy measurements” were produced under the zero-Concentrated Differential Privacy framework (Bun, M. and Steinke, T [2016] https://arxiv.org/abs/1605.02065; see also Dwork C. and Roth, A. [2014] https://www.cis.upenn.edu/~aaroth/Papers/privacybook.pdf) implemented via the discrete Gaussian mechanism (Cannone C., et al., [2023] https://arxiv.org/abs/2004.00010), which added positive or negative integer-valued noise to each of the resulting counts. The noisy measurements are an intermediate stage of the TDA prior to the post-processing the TDA then performs to ensure internal and hierarchical consistency within the resulting tables. The Census Bureau has released these 2010 Census demonstration data to enable data users to evaluate the expected impact of disclosure avoidance variability on 2020 Census data. The 2010 Census Production Settings Redistricting Data (P.L.94-171) Demonstration Noisy Measurement File (2023-04-03) has been cleared for public dissemination by the Census Bureau Disclosure Review Board (CBDRB-FY22-DSEP-004).

The data includes zero-Concentrated Differentially Private (zCDP) (Bun, M. and Steinke, T [2016]) noisy measurements, implemented via the discrete Gaussian mechanism. These are estimated counts of individuals and housing units included in the 2010 Census Edited File (CEF), which includes confidential data initially collected in the 2010 Census of Population and Housing. The noisy measurements included in this file were subsequently post-processed by the TopDown Algorithm (TDA) to produce the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) (https://www2.census.gov/programs-surveys/decennial/2020/program-management/data-product-planning/2010-demonstration-data-products/04-Demonstration_Data_Products_Suite/2023-04-03/). As these 2010 Census demonstration data are intended to support study of the design and expected impacts of the 2020 Disclosure Avoidance System, the 2010 CEF records were pre-processed before application of the zCDP framework. This pre-processing converted the 2010 CEF records into the input-file format, response codes, and tabulation categories used for the 2020 Census, which differ in substantive ways from the format, response codes, and tabulation categories originally used for the 2010 Census.

The NMF provides estimates of counts of persons in the CEF by various characteristics and combinations of characteristics including their reported race and ethnicity, whether they were of voting age, whether they resided in a housing unit or one of 7 group quarters types, and their census block of residence after the addition of discrete Gaussian noise (with the scale parameter determined by the privacy-loss budget allocation for that particular query under zCDP). Noisy measurements of the counts of occupied and vacant housing units by census block are also included. Lastly, data on constraints—information into which no noise was infused by the Disclosure Avoidance System (DAS) and used by the TDA to post-process the noisy measurements into the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) —are provided.

Household Demographics in the 2010 CensusThis feature layer contains demographics about households as reported by the U.S. Census Bureau (USCB) in the 2010 U.S. Census. These attributes cover topics such as household types, household size, nonfamily households, householder age, and households with children. A small subset of attributes from the 2000 Census are also included as reference.Per the Census, "Also known as the Population and Housing Census, the Decennial U.S. Census is designed to count every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute hundreds of billions of dollars in federal funds to local communities."Four layers are available: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map detail increases when zooming to local areas. Only one geography is in view at any time.Household Demographics 2010 CensusData currency: 2010Data download: Explore Census DataFor more information: Households and Families: 2010For feedback please contact: ArcGIScomNationalMaps@esri.comData Processing notes:State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies)Field names and aliases are processed by Esri as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.U.S. Census BureauPer USCB, "the Census Bureau is the federal government’s largest statistical agency. We are dedicated to providing current facts and figures about America’s people, places, and economy. Federal law protects the confidentiality of all the information the Census Bureau collects."

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Face refers to the areal (polygon) topological primitives that make up MTDB. A face is bounded by one or more edges; its boundary includes only the edges that separate it from other faces, not any interior edges contained within the area of the face. The Topological Faces Shapefile contains the attributes of each topological primitive face. Each face has a unique topological face identifier (TFID) value. Each face in the shapefile includes the key geographic area codes for almost all geographic areas for which the Census Bureau tabulates data for both the 2010 Census and Census 2000. The geometries of each of these geographic areas can then be built by dissolving the face geometries on the appropriate key geographic area codes in the Topological Faces Shapefile.

The 2010 Census Blocks with Demographic Profile dataset was produced by joining the U.S.Census Bureau's 2010 TIGER/Line File-derived Census Blocks for Fulton County with selected 2010 Summary File 1 data fields. The result is a census block boundary layer attributed with some the more commonly used demographics such as total population, population by race, population by age group, median age, and housing and household characteristics. Because the dataset was derived from the TIGER/Line File Census Blocks, the U.S.Census Bureau's metadata for that dataset is provided below.The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces.

The 2010 Census Blocks with Demographic Profile dataset was produced by joining the U.S.Census Bureau's 2010 TIGER/Line File-derived Census Blocks for Fulton County with selected 2010 Summary File 1 data fields. The result is a census block boundary layer attributed with some the more commonly used demographics such as total population, population by race, population by age group, median age, and housing and household characteristics. Because the dataset was derived from the TIGER/Line File Census Blocks, the U.S.Census Bureau's metadata for that dataset is provided below.The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces.

This file is released in support of the Redistricting Data (P.L. 94-171) Summary File. The shapefiles represent geographic linear features as of January 1, 2010. The files also contain attribute information about these features, such as names, the type of feature, the geographic relationship to other features, and other related information. The 2010 Redistricting Shapefiles include data for all 50 states, the District of Columbia and the Commonwealth of Puerto Rico. This file is only provided for the State of Arkansas.

2010 Census Tract polygons for all of Pierce County, realigned to Pierce County roads, parcels, hydro, railroads, powerlines, etc. Population figures for race, ethnicity, median age, household size, household count, etc were downloaded from the US Census website and joined to this layer. Please read metadata for additional information. Any data download constitutes acceptance of the Terms of Use.Abstract:Census tracts are small, relatively permanent statistical subdivisions of a county delineated by local participants as part of the U.S. Census Bureau's Participant Statistical Areas Program. The U.S. Census Bureau delineated census tracts in situations where no local participant existed or where local or tribal governments declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of decennial census data. This is the first decennial census for which the entire United States is covered by census tracts. For the 1990 census, some counties had census tracts and others had block numbering areas (BNAs). In preparation for Census 2000, all BNAs were replaced by census tracts, which may or may not cover the same areas. The original 2010 census data was downloaded via ftp from Census. The lines were were redrawn with the best available data; such as roads, parcels, hydro, railroads, powerlines. Pierce County requires that the Census layers to be used with county data layers. The population figures were downloaded from the US Census website and joined to this this theme. For more information read 2010 Census Summary File 1 (Issued June 2011). The pdf document is located at: https://www.census.gov/prod/cen2010/doc/sf1.pdfPurpose:The US Census Tracts are used by variety of departments for analysis, planning, and mapping purposes.DATA LINKED FROM PIERCE COUNTY OPEN DATA PORTALSee the metadata and original layer here

Source: U.S. Census Bureau, PL 94-171 Redistricting data, 2000 and 2010. Note: Census numbers for the cities of Burien and Kent do not include annexations that took place after March 31, 2010. These annexations would increase Burien to 48,072, Kent to 118,565, and decrease uninc King County to 284,089.

detailed characteristics of people and housing for individual 2010 census blocks

Excel table of census data created to project populations at the Neighborhood Tabulation Area, a small area level, from 2000 to 2030 for PlaNYC, the long-term sustainability plan for New York City

What is unique about LA County’s data?It is clipped to the ocean boundary. Raw Census data includes a 3 mile buffer into the ocean, which impacts cartography.IMPORTANT! It has been updated to the 2012 Census Geography Update, which merged Tracts 1370.00 and 9304.01 into the combined tract 1370.00. So the CT10 field actually reflects the 2012 Census update, which is used for all population products 2012 and later.How was this data created?This data was downloaded from Census Bureau website: http://www.census.gov/cgi-bin/geo/shapefiles2010/file-download and clipped to the County Boundary using ESRI’s ArcGIS Desktop. Two new fields were added in census tract data – area in square feet and shape length in feet. This dataset has unique identifier field “GEOID10” for each record and the census tract number fields “CT10” and “LABEL” (6-digit number and 6-digit number with decimal point, respectively).

Age and Gender Demographics in the 2010 CensusThis feature layer, utilizing data from the U.S. Census Bureau, displays 2010 demographics about age and gender in the U.S. for state, county, tract, and block group geographies. Per USCB, "Focusing on a population’s age and sex composition is one of the most basic ways to understand population change over time." The attributes cover topics such as population counts by 5-year age ranges, male and female population counts, and median age values. A small subset of attributes from the 2000 Census are also included as reference.The U.S. Census counts every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. Four layers are available: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas. Only one geography is in view at any time.Wisconsin Census Tract: 550791851.00Data currency: 2010Data source: Explore Census DataData modification: NoneFor more information:Population Profiles 2010State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies).For a list of fields and alias names, access the following excel document.For feedback please contact: ArcGIScomNationalMaps@esri.comU.S. Census BureauPer USCB, "the Census Bureau is the federal government’s largest statistical agency. We are dedicated to providing current facts and figures about America’s people, places, and economy. Federal law protects the confidentiality of all the information the Census Bureau collects."

Summary File 1 (SF1) Urban/Rural Update contains summary statistics on population and housing subjects derived from the responses to the 2010 Census questionnaire. Population items include sex, age, race, Hispanic or Latino origin, household relationship, household type, household size, family type, family size, and group quarters. Housing items include occupancy status, vacancy status, and tenure (whether a housing unit is owner-occupied or renter-occupied). The summary statistics are presented in 333 tables, which are tabulated for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature), including, but not limited to, regions, divisions, states, metropolitan/micropolitan statistical areas, counties, county subdivisions, places, congressional districts, American Indian Areas, Alaska Native Areas, Hawaiian Home Lands, ZIP Code tabulation areas, census tracts, block groups, and blocks. There are 177 population tables and 58 housing tables shown down to the block level; 84 population tables and 4 housing tables shown down to the census tract level; and 10 population tables shown down to the county level. Some of the summary areas are iterated for "geographic components" or portions of geographic areas, e.g., the principal city of a metropolitan statistical area (MSA) or the urban and rural portions of a MSA. With one variable per table cell and additional variables with geographic information, the collection comprises 2,597 data files, 49 per state, the District of Columbia, Puerto Rico, and the National File. The Census Bureau released SF1 in three stages: initial release, National Update, and Urban/Rural Update. The National Update added summary levels for the United States, regions, divisions, and geographic areas that cross state lines such as Combined Statistical Areas. This update adds urban and rural population and housing unit counts, summary levels for urban areas and the urban/rural components of census tracts and block groups, geographic components involving urbanized areas and urban clusters, and two new tables (household type by relationship for the population 65 years and over and a new tabulation of the total population by race). The initial release and National Update is available as ICPSR 33461. ICPSR supplies this data collection in 54 ZIP archives. There is a separate archive for each state, the District of Columbia, Puerto Rico, and the National File. The last archive contains a Microsoft Access database shell and additional documentation files besides the codebook.

2010 Census Tract data for use with GIS mapping software, databases, and web applications are from Caliper Corporation. Available for Maptitude or in any format such as shapefile, KML, KMZ, GeoJSON.

Because the 2020 Census relationship files released by the Census Bureau did not include population or housing unit percentage allocations, alternative methodologies to allocate population and housing units between 2010 and 2020 Census tracts were tested. The methodology selected by DRU was to use building footprints and residential parcels at the 2020 Census block level to allocate population and housing units.

Census Blocks from the 2010 US Census for New York City including portions under water. These boundary files are derived from the US Census Bureau's TIGER project and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at DCP Website: BYTES of the BIG APPLE.