Russia is the largest country in the world by far, with a total area of just over 17 million square kilometers. After Antarctica, the next three countries are Canada, the U.S., and China; all between 9.5 and 10 million square kilometers. The figures given include internal water surface area (such as lakes or rivers) - if the figures were for land surface only then China would be the second largest country in the world, the U.S. third, and Canada (the country with more lakes than the rest of the world combined) fourth. Russia Russia has a population of around 145 million people, putting it in the top ten most populous countries in the world, and making it the most populous in Europe. However, it's vast size gives it a very low population density, ranked among the bottom 20 countries. Most of Russia's population is concentrated in the west, with around 75 percent of the population living in the European part, while around 75 percent of Russia's territory is in Asia; the Ural Mountains are considered the continental border. Elsewhere in the world Beyond Russia, the world's largest countries all have distinctive topographies and climates setting them apart. The United States, for example, has climates ranging from tundra in Alaska to tropical forests in Florida, with various mountain ranges, deserts, plains, and forests in between. Populations in these countries are often concentrated in urban areas, and are not evenly distributed across the country. For example, around 85 percent of Canada's population lives within 100 miles of the U.S. border; around 95 percent of China lives east of the Heihe–Tengchong Line that splits the country; and the majority of populations in large countries such as Australia or Brazil live near the coast.

The statistic shows the largest countries in South America, based on land area. Brazil is the largest country by far, with a total area of over 8.5 million square kilometers, followed by Argentina, with almost 2.8 million square kilometers.

Based on land area, Brazil is the largest country in Latin America by far, with a total area of over 8.5 million square kilometers. Argentina follows with almost 2.8 million square kilometers. Cuba, whose surface area extends over almost 111,000 square kilometers, is the Caribbean country with the largest territory.

Brazil: a country with a lot to offer

Brazil's borders reach nearly half of the South American subcontinent, making it the fifth-largest country in the world and the third-largest country in the Western Hemisphere. Along with its landmass, Brazil also boasts the largest population and economy in the region. Although Brasília is the capital, the most significant portion of the country's population is concentrated along its coastline in the cities of São Paulo and Rio de Janeiro.

South America: a region of extreme geographic variation

With the Andes mountain range in the West, the Amazon Rainforest in the East, the Equator in the North, and Cape Horn as the Southern-most continental tip, South America has some of the most diverse climatic and ecological terrains in the world. At its core, its biodiversity can largely be attributed to the Amazon, the world's largest tropical rainforest, and the Amazon river, the world's largest river. However, with this incredible wealth of ecology also comes great responsibility. In the past decade, roughly 80,000 square kilometers of the Brazilian Amazon were destroyed. And, as of late 2019, there were at least 1,000 threatened species in Brazil alone.

World Countries provides a detailed basemap layer for the countries of the world. This layer has been designed to be used as a basemap and includes fields for official names and country codes, along with fields for continent and display. Particularly useful are the fields LAND_TYPE and LAND_RANK that separate polygons based on their size. These fields are helpful for rendering at different scales by providing the ability to turn off small islands that may clutter small-scale (zoomed out) views. The sources of this dataset are Esri, Garmin, U.S. Central Intelligence Agency (The World Factbook), and International Organization for Standardization (ISO). This layer was published in October 2024. It is updated every 12-18 months or as significant changes occur.

this is the data of Top 10 populated countries of world as on 30 March 2024 with history of their population from 1955. it also have forecasted population values of these countries from 2025 to 2050.

here are the detail of columns

1: year:1955 to 2050

2: India: (population in millions)

3: china: (population in millions)

4: USA: (population in millions)

5: Indonesia: (population in millions)

6: Pakistan: (population in millions)

7: Nigeria: (population in millions)

8: Brazil: (population in millions)

9: Bangladesh: (population in millions)

10: Russia: (population in millions)

11: Mexico: (population in millions)

Acknowledgement This Dataset is created from https://www.worldometers.info/. If you want to learn more, you can visit the Website.

In 2025, India overtook China as the world's most populous country and now has almost 1.46 billion people. China now has the second-largest population in the world, still with just over 1.4 billion inhabitants, however, its population went into decline in 2023. Global population As of 2025, the world's population stands at almost 8.2 billion people and is expected to reach around 10.3 billion people in the 2080s, when it will then go into decline. Due to improved healthcare, sanitation, and general living conditions, the global population continues to increase; mortality rates (particularly among infants and children) are decreasing and the median age of the world population has steadily increased for decades. As for the average life expectancy in industrial and developing countries, the gap has narrowed significantly since the mid-20th century. Asia is the most populous continent on Earth; 11 of the 20 largest countries are located there. It leads the ranking of the global population by continent by far, reporting four times as many inhabitants as Africa. The Demographic Transition The population explosion over the past two centuries is part of a phenomenon known as the demographic transition. Simply put, this transition results from a drastic reduction in mortality, which then leads to a reduction in fertility, and increase in life expectancy; this interim period where death rates are low and birth rates are high is where this population explosion occurs, and population growth can remain high as the population ages. In today's most-developed countries, the transition generally began with industrialization in the 1800s, and growth has now stabilized as birth and mortality rates have re-balanced. Across less-developed countries, the stage of this transition varies; for example, China is at a later stage than India, which accounts for the change in which country is more populous - understanding the demographic transition can help understand the reason why China's population is now going into decline. The least-developed region is Sub-Saharan Africa, where fertility rates remain close to pre-industrial levels in some countries. As these countries transition, they will undergo significant rates of population growth.

Description

This comprehensive dataset provides a wealth of information about all countries worldwide, covering a wide range of indicators and attributes. It encompasses demographic statistics, economic indicators, environmental factors, healthcare metrics, education statistics, and much more. With every country represented, this dataset offers a complete global perspective on various aspects of nations, enabling in-depth analyses and cross-country comparisons.

Key Features

• Country: Name of the country.
• Density (P/Km2): Population density measured in persons per square kilometer.
• Abbreviation: Abbreviation or code representing the country.
• Agricultural Land (%): Percentage of land area used for agricultural purposes.
• Land Area (Km2): Total land area of the country in square kilometers.
• Armed Forces Size: Size of the armed forces in the country.
• Birth Rate: Number of births per 1,000 population per year.
• Calling Code: International calling code for the country.
• Capital/Major City: Name of the capital or major city.
• CO2 Emissions: Carbon dioxide emissions in tons.
• CPI: Consumer Price Index, a measure of inflation and purchasing power.
• CPI Change (%): Percentage change in the Consumer Price Index compared to the previous year.
• Currency_Code: Currency code used in the country.
• Fertility Rate: Average number of children born to a woman during her lifetime.
• Forested Area (%): Percentage of land area covered by forests.
• Gasoline_Price: Price of gasoline per liter in local currency.
• GDP: Gross Domestic Product, the total value of goods and services produced in the country.
• Gross Primary Education Enrollment (%): Gross enrollment ratio for primary education.
• Gross Tertiary Education Enrollment (%): Gross enrollment ratio for tertiary education.
• Infant Mortality: Number of deaths per 1,000 live births before reaching one year of age.
• Largest City: Name of the country's largest city.
• Life Expectancy: Average number of years a newborn is expected to live.
• Maternal Mortality Ratio: Number of maternal deaths per 100,000 live births.
• Minimum Wage: Minimum wage level in local currency.
• Official Language: Official language(s) spoken in the country.
• Out of Pocket Health Expenditure (%): Percentage of total health expenditure paid out-of-pocket by individuals.
• Physicians per Thousand: Number of physicians per thousand people.
• Population: Total population of the country.
• Population: Labor Force Participation (%): Percentage of the population that is part of the labor force.
• Tax Revenue (%): Tax revenue as a percentage of GDP.
• Total Tax Rate: Overall tax burden as a percentage of commercial profits.
• Unemployment Rate: Percentage of the labor force that is unemployed.
• Urban Population: Percentage of the population living in urban areas.
• Latitude: Latitude coordinate of the country's location.
• Longitude: Longitude coordinate of the country's location.

Potential Use Cases

• Analyze population density and land area to study spatial distribution patterns.
• Investigate the relationship between agricultural land and food security.
• Examine carbon dioxide emissions and their impact on climate change.
• Explore correlations between economic indicators such as GDP and various socio-economic factors.
• Investigate educational enrollment rates and their implications for human capital development.
• Analyze healthcare metrics such as infant mortality and life expectancy to assess overall well-being.
• Study labor market dynamics through indicators such as labor force participation and unemployment rates.
• Investigate the role of taxation and its impact on economic development.
• Explore urbanization trends and their social and environmental consequences.

Data Source: This dataset was compiled from multiple data sources

If this was helpful, a vote is appreciated ❤️ Thank you 🙂

Context

This ranking was created by aggregating data from 14 websites and counting how many times each country was mentioned in the top 3, top 5, and top 10 places. There is no official measures or rankings for a countries education system.

Content

The 14 web sources are as follows: https://worldpopulationreview.com/country-rankings/education-rankings-by-country https://worldtop20.org/worldbesteducationsystem https://www.currentschoolnews.com/education-news/best-educational-system-in-the-world/ https://www.edsys.in/best-education-system-in-the-world/ https://www.indiaeducation.net/studyabroad/articles/countries-with-the-best-higher-education-system.html http://blog.mpanchang.com/10-best-education-systems-in-the-world/ https://admission.buddy4study.com/study-abroad/best-education-systems-in-world https://www.usnews.com/news/best-countries/best-education https://www.theedadvocate.org/the-edvocates-list-of-the-20-best-education-systems-in-the-world/ https://www.worldatlas.com/articles/10-countries-with-the-best-education-systems.html https://ceoworld.biz/2020/05/10/ranked-worlds-best-countries-for-education-system-2020/ https://www.independent.co.uk/news/education/11-best-school-systems-world-a7425391.html https://naijaquest.com/best-education-system-in-the-world/ https://mintbook.com/blog/best-educational-systems-in-the-world/

Acknowledgements

Created for BAD 52 - Human Relations in Organizations from the Santa Rosa Junior College in Fall 2020.

The average for 2023 based on 11 countries was 671160 sq. km. The highest value was in India: 2973190 sq. km and the lowest value was in Singapore: 718 sq. km. The indicator is available from 1961 to 2023. Below is a chart for all countries where data are available.

This data file contains details of various nations and their flags. In this file the fields are separated by spaces (not commas). With this data you can try things like predicting the religion of a country from its size and the colours in its flag.

10 attributes are numeric-valued. The remainder are either Boolean- or nominal-valued.

Attribute Information:

1. name: Name of the country concerned
2. landmass: 1=N.America, 2=S.America, 3=Europe, 4=Africa, 4=Asia, 6=Oceania
3. zone: Geographic quadrant, based on Greenwich and the Equator; 1=NE, 2=SE, 3=SW, 4=NW
4. area: in thousands of square km
5. population: in round millions
6. language: 1=English, 2=Spanish, 3=French, 4=German, 5=Slavic, 6=Other Indo-European, 7=Chinese, 8=Arabic, 9=Japanese/Turkish/Finnish/Magyar, 10=Others
7. religion: 0=Catholic, 1=Other Christian, 2=Muslim, 3=Buddhist, 4=Hindu, 5=Ethnic, 6=Marxist, 7=Others
8. bars: Number of vertical bars in the flag
9. stripes: Number of horizontal stripes in the flag
10. colours: Number of different colours in the flag
11. red: 0 if red absent, 1 if red present in the flag
12. green: same for green
13. blue: same for blue
14. gold: same for gold (also yellow)
15. white: same for white
16. black: same for black
17. orange: same for orange (also brown)
18. mainhue: predominant colour in the flag (tie-breaks decided by taking the topmost hue, if that fails then the most central hue, and if that fails the leftmost hue)
19. circles: Number of circles in the flag
20. crosses: Number of (upright) crosses
21. saltires: Number of diagonal crosses
22. quarters: Number of quartered sections
23. sunstars: Number of sun or star symbols
24. crescent: 1 if a crescent moon symbol present, else 0
25. triangle: 1 if any triangles present, 0 otherwise
26. icon: 1 if an inanimate image present (e.g., a boat), otherwise 0
27. animate: 1 if an animate image (e.g., an eagle, a tree, a human hand) present, 0 otherwise
28. text: 1 if any letters or writing on the flag (e.g., a motto or slogan), 0 otherwise
29. topleft: colour in the top-left corner (moving right to decide tie-breaks)
30. botright: Colour in the bottom-left corner (moving left to decide tie-breaks)

As of October 2025, China has the world’s largest online population, with approximately 1.3 billion internet users. India, currently the most populous nation, ranks second with about 1.03 billion users. The United States follows in third place. Worldwide internet usage As of October 2025, there are more than six billion internet users worldwide. However, user distribution varies significantly by region. In 2024, Eastern Asia alone accounted for 1.34 billion internet users, while Africa and the Middle East reported considerably lower figures. As expected, urban areas also exhibited higher rates of internet access compared to rural regions. Internet use in China It is no surprise that China ranks first among countries with the most internet users. Driven by rapid economic development and a strong cultural embrace of technology, 91.6 percent of China’s estimated 1.4 billion residents are online. As of the third quarter of 2024, about 91.8 percent of Chinese internet users were active on WeChat, the country’s most popular social platform. During the same period, Chinese internet users spent an average of five hours and 33 minutes online each day.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Please make sure you have read our Mapping Populations overview page before choosing and downloading a dataset.


Bespoke methods used to produce datasets for specific individual countries are available through the WorldPop Open Population Repository (WOPR) link below. These are 100m resolution gridded population estimates using customized methods ("bottom-up" and/or "top-down") developed for the latest data available from each country. They can also be visualised and explored through the woprVision App.
The remaining datasets in the links below are produced using the "top-down" method, with either the unconstrained or constrained top-down disaggregation method used. Please make sure you read the Top-down estimation modelling overview page to decide on which datasets best meet your needs. Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 3 and 30 arc-seconds (approximately 100m and 1km at the equator, respectively):

- Unconstrained individual countries 2000-2020 ( 1km resolution ): Consistent 1km resolution population count datasets created using unconstrained top-down methods for all countries of the World for each year 2000-2020.
- Unconstrained individual countries 2000-2020 ( 100m resolution ): Consistent 100m resolution population count datasets created using unconstrained top-down methods for all countries of the World for each year 2000-2020.
- Unconstrained individual countries 2000-2020 UN adjusted ( 100m resolution ): Consistent 100m resolution population count datasets created using unconstrained top-down methods for all countries of the World for each year 2000-2020 and adjusted to match United Nations national population estimates (UN 2019)
-Unconstrained individual countries 2000-2020 UN adjusted ( 1km resolution ): Consistent 1km resolution population count datasets created using unconstrained top-down methods for all countries of the World for each year 2000-2020 and adjusted to match United Nations national population estimates (UN 2019).
-Unconstrained global mosaics 2000-2020 ( 1km resolution ): Mosaiced 1km resolution versions of the "Unconstrained individual countries 2000-2020" datasets.
-Constrained individual countries 2020 ( 100m resolution ): Consistent 100m resolution population count datasets created using constrained top-down methods for all countries of the World for 2020.
-Constrained individual countries 2020 UN adjusted ( 100m resolution ): Consistent 100m resolution population count datasets created using constrained top-down methods for all countries of the World for 2020 and adjusted to match United Nations national population estimates (UN 2019).

Older datasets produced for specific individual countries and continents, using a set of tailored geospatial inputs and differing "top-down" methods and time periods are still available for download here: Individual countries and Whole Continent.

Data for earlier dates is available directly from WorldPop.

WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00645

The average for 2023 based on 193 countries was -0.07 points. The highest value was in Liechtenstein: 1.61 points and the lowest value was in Syria: -2.75 points. The indicator is available from 1996 to 2023. Below is a chart for all countries where data are available.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Please make sure you have read our Mapping Populations overview page before choosing and downloading a dataset.


Bespoke methods used to produce datasets for specific individual countries are available through the WorldPop Open Population Repository (WOPR) link below. These are 100m resolution gridded population estimates using customized methods ("bottom-up" and/or "top-down") developed for the latest data available from each country. They can also be visualised and explored through the woprVision App.
The remaining datasets in the links below are produced using the "top-down" method, with either the unconstrained or constrained top-down disaggregation method used. Please make sure you read the Top-down estimation modelling overview page to decide on which datasets best meet your needs. Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 3 and 30 arc-seconds (approximately 100m and 1km at the equator, respectively):

- Unconstrained individual countries 2000-2020 ( 1km resolution ): Consistent 1km resolution population count datasets created using unconstrained top-down methods for all countries of the World for each year 2000-2020.
- Unconstrained individual countries 2000-2020 ( 100m resolution ): Consistent 100m resolution population count datasets created using unconstrained top-down methods for all countries of the World for each year 2000-2020.
- Unconstrained individual countries 2000-2020 UN adjusted ( 100m resolution ): Consistent 100m resolution population count datasets created using unconstrained top-down methods for all countries of the World for each year 2000-2020 and adjusted to match United Nations national population estimates (UN 2019)
-Unconstrained individual countries 2000-2020 UN adjusted ( 1km resolution ): Consistent 1km resolution population count datasets created using unconstrained top-down methods for all countries of the World for each year 2000-2020 and adjusted to match United Nations national population estimates (UN 2019).
-Unconstrained global mosaics 2000-2020 ( 1km resolution ): Mosaiced 1km resolution versions of the "Unconstrained individual countries 2000-2020" datasets.
-Constrained individual countries 2020 ( 100m resolution ): Consistent 100m resolution population count datasets created using constrained top-down methods for all countries of the World for 2020.
-Constrained individual countries 2020 UN adjusted ( 100m resolution ): Consistent 100m resolution population count datasets created using constrained top-down methods for all countries of the World for 2020 and adjusted to match United Nations national population estimates (UN 2019).

Older datasets produced for specific individual countries and continents, using a set of tailored geospatial inputs and differing "top-down" methods and time periods are still available for download here: Individual countries and Whole Continent.

Data for earlier dates is available directly from WorldPop.

WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00645

This table contains 45 series, with data for years 2014 - 2014 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada) Countries visited (15 items: United States; Mexico; United Kingdom; France; ...) Travel characteristics (3 items: Visits; Nights; Spending in country).

Overview

The Office of the Geographer and Global Issues at the U.S. Department of State produces the Large Scale International Boundaries (LSIB) dataset. The current edition is version 11.4 (published 24 February 2025). The 11.4 release contains updated boundary lines and data refinements designed to extend the functionality of the dataset. These data and generalized derivatives are the only international boundary lines approved for U.S. Government use. The contents of this dataset reflect U.S. Government policy on international boundary alignment, political recognition, and dispute status. They do not necessarily reflect de facto limits of control.

National Geospatial Data Asset

This dataset is a National Geospatial Data Asset (NGDAID 194) managed by the Department of State. It is a part of the International Boundaries Theme created by the Federal Geographic Data Committee.

Dataset Source Details

Sources for these data include treaties, relevant maps, and data from boundary commissions, as well as national mapping agencies. Where available and applicable, the dataset incorporates information from courts, tribunals, and international arbitrations. The research and recovery process includes analysis of satellite imagery and elevation data. Due to the limitations of source materials and processing techniques, most lines are within 100 meters of their true position on the ground.

Cartographic Visualization

The LSIB is a geospatial dataset that, when used for cartographic purposes, requires additional styling. The LSIB download package contains example style files for commonly used software applications. The attribute table also contains embedded information to guide the cartographic representation. Additional discussion of these considerations can be found in the Use of Core Attributes in Cartographic Visualization section below.

Additional cartographic information pertaining to the depiction and description of international boundaries or areas of special sovereignty can be found in Guidance Bulletins published by the Office of the Geographer and Global Issues: https://data.geodata.state.gov/guidance/index.html

Contact

Direct inquiries to internationalboundaries@state.gov. Direct download: https://data.geodata.state.gov/LSIB.zip

Attribute Structure

The dataset uses the following attributes divided into two categories: ATTRIBUTE NAME | ATTRIBUTE STATUS CC1 | Core CC1_GENC3 | Extension CC1_WPID | Extension COUNTRY1 | Core CC2 | Core CC2_GENC3 | Extension CC2_WPID | Extension COUNTRY2 | Core RANK | Core LABEL | Core STATUS | Core NOTES | Core LSIB_ID | Extension ANTECIDS | Extension PREVIDS | Extension PARENTID | Extension PARENTSEG | Extension

These attributes have external data sources that update separately from the LSIB: ATTRIBUTE NAME | ATTRIBUTE STATUS CC1 | GENC CC1_GENC3 | GENC CC1_WPID | World Polygons COUNTRY1 | DoS Lists CC2 | GENC CC2_GENC3 | GENC CC2_WPID | World Polygons COUNTRY2 | DoS Lists LSIB_ID | BASE ANTECIDS | BASE PREVIDS | BASE PARENTID | BASE PARENTSEG | BASE

The core attributes listed above describe the boundary lines contained within the LSIB dataset. Removal of core attributes from the dataset will change the meaning of the lines. An attribute status of “Extension” represents a field containing data interoperability information. Other attributes not listed above include “FID”, “Shape_length” and “Shape.” These are components of the shapefile format and do not form an intrinsic part of the LSIB.

Core Attributes

The eight core attributes listed above contain unique information which, when combined with the line geometry, comprise the LSIB dataset. These Core Attributes are further divided into Country Code and Name Fields and Descriptive Fields.

County Code and Country Name Fields

“CC1” and “CC2” fields are machine readable fields that contain political entity codes. These are two-character codes derived from the Geopolitical Entities, Names, and Codes Standard (GENC), Edition 3 Update 18. “CC1_GENC3” and “CC2_GENC3” fields contain the corresponding three-character GENC codes and are extension attributes discussed below. The codes “Q2” or “QX2” denote a line in the LSIB representing a boundary associated with areas not contained within the GENC standard.

The “COUNTRY1” and “COUNTRY2” fields contain the names of corresponding political entities. These fields contain names approved by the U.S. Board on Geographic Names (BGN) as incorporated in the ‘"Independent States in the World" and "Dependencies and Areas of Special Sovereignty" lists maintained by the Department of State. To ensure maximum compatibility, names are presented without diacritics and certain names are rendered using common cartographic abbreviations. Names for lines associated with the code "Q2" are descriptive and not necessarily BGN-approved. Names rendered in all CAPITAL LETTERS denote independent states. Names rendered in normal text represent dependencies, areas of special sovereignty, or are otherwise presented for the convenience of the user.

Descriptive Fields

The following text fields are a part of the core attributes of the LSIB dataset and do not update from external sources. They provide additional information about each of the lines and are as follows: ATTRIBUTE NAME | CONTAINS NULLS RANK | No STATUS | No LABEL | Yes NOTES | Yes

Neither the "RANK" nor "STATUS" fields contain null values; the "LABEL" and "NOTES" fields do. The "RANK" field is a numeric expression of the "STATUS" field. Combined with the line geometry, these fields encode the views of the United States Government on the political status of the boundary line.

ATTRIBUTE NAME | | VALUE | RANK | 1 | 2 | 3 STATUS | International Boundary | Other Line of International Separation | Special Line

A value of “1” in the “RANK” field corresponds to an "International Boundary" value in the “STATUS” field. Values of ”2” and “3” correspond to “Other Line of International Separation” and “Special Line,” respectively.

The “LABEL” field contains required text to describe the line segment on all finished cartographic products, including but not limited to print and interactive maps.

The “NOTES” field contains an explanation of special circumstances modifying the lines. This information can pertain to the origins of the boundary lines, limitations regarding the purpose of the lines, or the original source of the line.

Use of Core Attributes in Cartographic Visualization

Several of the Core Attributes provide information required for the proper cartographic representation of the LSIB dataset. The cartographic usage of the LSIB requires a visual differentiation between the three categories of boundary lines. Specifically, this differentiation must be between:

• International Boundaries (Rank 1);
• Other Lines of International Separation (Rank 2); and
• Special Lines (Rank 3).

Rank 1 lines must be the most visually prominent. Rank 2 lines must be less visually prominent than Rank 1 lines. Rank 3 lines must be shown in a manner visually subordinate to Ranks 1 and 2. Where scale permits, Rank 2 and 3 lines must be labeled in accordance with the “Label” field. Data marked with a Rank 2 or 3 designation does not necessarily correspond to a disputed boundary. Please consult the style files in the download package for examples of this depiction.

The requirement to incorporate the contents of the "LABEL" field on cartographic products is scale dependent. If a label is legible at the scale of a given static product, a proper use of this dataset would encourage the application of that label. Using the contents of the "COUNTRY1" and "COUNTRY2" fields in the generation of a line segment label is not required. The "STATUS" field contains the preferred description for the three LSIB line types when they are incorporated into a map legend but is otherwise not to be used for labeling.

Use of

Algeria is the biggest country in Africa, with an area exceeding 2.38 million square kilometers as of 2020. The Democratic Republic of the Congo and Sudan follow with a total area of around 2.34 million and 1.88 million square kilometers, respectively. On the other hand, Seychelles is the smallest country on the continent, with an area of only 460 square kilometers. Overall, Africa’s total area exceeds 30 million square kilometers, being the second largest continent in the world after Asia. Nigeria and Ethiopia lead the ranking of the most populated countries in Africa.

How have the African countries been formed?

The political geography of Africa has been influenced by its colonial history. Between the 19th and 20th Century, the European colonizers have divided up Africa. The partition of the territories was merely driven by strategic purposes: Borders between countries were artificially created in the absence of a geographic border. Following the decolonization, most countries gained their independence in the second half of the 1900s. The newest country in Africa is South Sudan, which became independent in 2011.

Africa's physical geography

Geographically, the African continent is mostly constituted by plains and tablelands. Inner plateaus are prevalent in the sub-Saharan region. In the center-north, the arid Sahara Desert extends for around nine million square kilometers, being the largest subtropical desert in the world. The continent also has some of the biggest water basins worldwide, namely the Nile, Congo, and Niger rivers. East Africa has, instead, the highest summit on the continent, the Kilimanjaro. Peaking at 5,895 meters, the mountain dominates Tanzania’s landscape and attracts thousands of climbers each year.

Abstract

The World Values Survey (www.worldvaluessurvey.org) is a global network of social scientists studying changing values and their impact on social and political life, led by an international team of scholars, with the WVS association and secretariat headquartered in Stockholm, Sweden. The survey, which started in 1981, seeks to use the most rigorous, high-quality research designs in each country. The WVS consists of nationally representative surveys conducted in almost 100 countries which contain almost 90 percent of the world’s population, using a common questionnaire. The WVS is the largest non-commercial, cross-national, time series investigation of human beliefs and values ever executed, currently including interviews with almost 400,000 respondents. Moreover the WVS is the only academic study covering the full range of global variations, from very poor to very rich countries, in all of the world’s major cultural zones. The WVS seeks to help scientists and policy makers understand changes in the beliefs, values and motivations of people throughout the world. Thousands of political scientists, sociologists, social psychologists, anthropologists and economists have used these data to analyze such topics as economic development, democratization, religion, gender equality, social capital, and subjective well-being. These data have also been widely used by government officials, journalists and students, and groups at the World Bank have analyzed the linkages between cultural factors and economic development.

Geographic coverage

This survey covers the Russian Federation.

Analysis unit

• Household
• Individual

Universe

The WVS for the Russian Federation covers national population, aged 18 years and over, for both sexes.

Kind of data

Sample survey data [ssd]

Sampling procedure

The sample was designed to be representative of the entire adult population, i.e. 18 years and older, of your country. The lower age cut-off for the sample was 18 and there was not an upper age cut-off for the sample. Population: Total non-institutionalized population of the Russian Federation, 18 years and older, without citizens living in the Far North and in inaccessible regions of Siberia.

Five-stage area probability sample: (1) The country is divided into 4 strata. For each stratum the desired number of respondents is defined proportional to population size. (2) Within each stratum 50 primary sampling units (administrative districts) are selected at random proportional to size. (3) Within each primary sampling unit secondary sampling units (towns and rural Soviets as administrative subdistricts) are selected randomly (4) Within each secondary sampling unit third sampling units (voting districts in the towns, villages belonging to a rural Soviet in the rural areas) are randomly selected. The total number of third sampling units was 186. (5) Within each third sampling unit households were selected at random from a household register (fourth sampling unit). (6) Within each household the respondent is randomly selected using the "Kish-selection-grid": all adult family members are listed in a certain order, first males from the oldest to the youngest, than females from the oldest to the youngest; the respondent is selected by a selection key which is randomly composed for each possible type of household composition (fifth sampling unit). Selection is done: 41% Male and 59% Female. 75% Urban and 25% Rural. The sample size is N=2040.

Universe: The universe includes the adult population of Russia residing in 89 regios and republics. The Far North and inaccessible regions of Siberia, military bases and prisons are not included. Primary sampling units: Administrative rayons in regions, krays and republics are used as the primary sampling units (PSUs). Each rayon is a geographically localized territory which in general contains both urban and rural settlements. Either a town or a rural settlement may be a center of rayon. Usually, but not always, it is the largest settlement in a rayon. If a rural settlement is the center of a rayon itself generally consists only of rural settlements and is referred to the category of rural rayhons. Separate towns which are considered by official statistical institutions as rayons are also included in the set of primary sampling units. These towns are not part of rayons though they are situated in the rayon's territory. Sometimes they may also include some suburbs. So separate towns and rural rayons may be considered as two poles of a scale which contains all various rayhons of Russia (primary sampling units, PSUs). On the continuum between these poles there are rayons of mixed type containing urban and rural sttlements of different sizes. Population size of different rayons may vary from 4-5 thousand to several hundred thousand or even several million of people in cities considered as separate rayons. If population size is less than 10.000 the rayon is linked to an adjacent one in a stratum. All PSUs are presented in the form of data base of more than 2.000 records with each record corresponding to one rayon or separate town (later referred to as rayons). The record for each rayon (PSU) contains the following data: - unique identification number and rayon title, - code and title of a region, - central town population size, - rayon population size All data are based on annual statistical reports (Chislennost RSFSR na 1 janvarya 1990) and 1989 census information. Primary sampling units stratification: PSUs stratification is based on two variables: geographical placement and status of the rayon center. All primary sampling units are grouped in strata consisting of homogeneous rayons. Strata are formed so that each stratum has approximately the same population size. They may consist of from one to several dozen PSUs depending on PSUs population size. In this sample the stratum population size is equal approximately 3.000 thousand (tab.1). Two cities in Russia Moscow and St. Petersburg have population size exceeding stratum population size. They form so called self-representing strata. The geographic placement of a rayon is defined by corresponding economic and geographic zone. According to statistical institutions Russia is divided into 11 economic and geopraphic regions. But for sample construction this division seems to be too fractional and can prevent forming strata of equal size in each zone. The main goal for using the geographic factor as a stratification variable is the uniform spreading of PSUs through Russia territory. For these reasons economic and geographic regions in Russia wre grouped in four zones:

• Zone 1 - North and Center of European part of Russia (unites Northern, North Western + Kaliningrad obl., Central and Volgo-´Vjatsky regions of Russia).

• Zone 2 - South of Wuropean part of Russia (unites Tsentralno-Chernozjemny, Povolzhsky and North- Caucasian regions of Russia).

• Zone 3 - Ural and West Siberia (two economic regions)

• Zone 4 - East Siberia and Far East (two economic regions). For economic and geographic division in Russia seven factors are used: nature and resources, population, industry, power engineering, area industry distribution, agriculture, transport and communicftions ( Economicheskaya geographiya SSSR. Moskva, Vishaya shkola, 1983). 11 regions were aggregated in four zones on the basis of two first factors: nature and resources and population. The second variable of PSUs stratification is the status of the rayon center. It is formed on officially accepted statistical classification by type and population size:

• rural settlement,

• urban settlement with populatiton size:

  • below 20.000
  • between 20.000 and 50.000
  • between 50.000 and 200.000
  • between 500.000 and 1000.000
  • more than 1000.000

Remarks about sampling: - Final numbers of clusters or sampling points: 186 - Sample unit from office sampling: Household

Mode of data collection

Face-to-face [f2f]

Research instrument

The WVS questionnaire was in Russian. Some special variable labels have been included, such as: V56 Neighbours: Jews and V149 Institution: The European Union. Special categories labels are: V203/ V204: Geographical affinity, 1. Locality or town where you live, 2. Region of country where you live, 3. Own country as a whole, 4. Europe, 5. The world as whole. Country Specific variables included are: V208: Ethnic identification, 2. Ukranian, 3. Tatarian 4. Komi 5 Mordovia, 6 Karbardian 7 Balkarian; V209: Language at home: 2. Ukranian, 3. Tatarian 4. Komi 5 Mordovia, 6 Karbardian 7 Balkarian; The variables political parties V210 a V212; Region: V 234 and V206 Born in this country are also included as country specific variables. The ethnic group of the respondent was not asked in the interview. In the cases of Eastern Europe Countries where the ethnic group is missing the language chosen for interview is the only indicator available to control the ethnic composition of the samples. Nevertheless, native language indicated in the cesus of 1989 and language chosen for interview are not exactly the same, since the first is rather differentiated whereas for the last the alternatives to choose between where only the national language or Russian.

Response rate

The response rate for the Russian Federation is 74.9% and is calculated as follows: (2040/2723) x 100=74.9%

Sampling error estimates

+/- 2,2%

The average for 2023 based on 27 countries was 147715 sq. km. The highest value was in France: 538950 sq. km and the lowest value was in Malta: 320 sq. km. The indicator is available from 1961 to 2023. Below is a chart for all countries where data are available.

Context

The United States Census Bureau’s international dataset provides estimates of country populations since 1950 and projections through 2050. Specifically, the dataset includes midyear population figures broken down by age and gender assignment at birth. Additionally, time-series data is provided for attributes including fertility rates, birth rates, death rates, and migration rates.

Querying BigQuery tables

You can use the BigQuery Python client library to query tables in this dataset in Kernels. Note that methods available in Kernels are limited to querying data. Tables are at bigquery-public-data.census_bureau_international.

Sample Query 1

What countries have the longest life expectancy? In this query, 2016 census information is retrieved by joining the mortality_life_expectancy and country_names_area tables for countries larger than 25,000 km2. Without the size constraint, Monaco is the top result with an average life expectancy of over 89 years!

standardSQL

SELECT age.country_name, age.life_expectancy, size.country_area FROM ( SELECT country_name, life_expectancy FROM bigquery-public-data.census_bureau_international.mortality_life_expectancy WHERE year = 2016) age INNER JOIN ( SELECT country_name, country_area FROM bigquery-public-data.census_bureau_international.country_names_area where country_area > 25000) size ON age.country_name = size.country_name ORDER BY 2 DESC /* Limit removed for Data Studio Visualization */ LIMIT 10

Sample Query 2

Which countries have the largest proportion of their population under 25? Over 40% of the world’s population is under 25 and greater than 50% of the world’s population is under 30! This query retrieves the countries with the largest proportion of young people by joining the age-specific population table with the midyear (total) population table.

standardSQL

SELECT age.country_name, SUM(age.population) AS under_25, pop.midyear_population AS total, ROUND((SUM(age.population) / pop.midyear_population) * 100,2) AS pct_under_25 FROM ( SELECT country_name, population, country_code FROM bigquery-public-data.census_bureau_international.midyear_population_agespecific WHERE year =2017 AND age < 25) age INNER JOIN ( SELECT midyear_population, country_code FROM bigquery-public-data.census_bureau_international.midyear_population WHERE year = 2017) pop ON age.country_code = pop.country_code GROUP BY 1, 3 ORDER BY 4 DESC /* Remove limit for visualization*/ LIMIT 10

Sample Query 3

The International Census dataset contains growth information in the form of birth rates, death rates, and migration rates. Net migration is the net number of migrants per 1,000 population, an important component of total population and one that often drives the work of the United Nations Refugee Agency. This query joins the growth rate table with the area table to retrieve 2017 data for countries greater than 500 km2.

SELECT growth.country_name, growth.net_migration, CAST(area.country_area AS INT64) AS country_area FROM ( SELECT country_name, net_migration, country_code FROM bigquery-public-data.census_bureau_international.birth_death_growth_rates WHERE year = 2017) growth INNER JOIN ( SELECT country_area, country_code FROM bigquery-public-data.census_bureau_international.country_names_area

Update frequency

Historic (none)

Dataset source

United States Census Bureau

Terms of use: This dataset is publicly available for anyone to use under the following terms provided by the Dataset Source - http://www.data.gov/privacy-policy#data_policy - and is provided "AS IS" without any warranty, express or implied, from Google. Google disclaims all liability for any damages, direct or indirect, resulting from the use of the dataset.

See the GCP Marketplace listing for more details and sample queries: https://console.cloud.google.com/marketplace/details/united-states-census-bureau/international-census-data