This statistic shows the top 25 cities in the United States with the highest resident population as of July 1, 2022. There were about 8.34 million people living in New York City as of July 2022.

In 2025, approximately 23 million people lived in the São Paulo metropolitan area, making it the biggest in Latin America and the Caribbean and the sixth most populated in the world. The homonymous state of São Paulo was also the most populous federal entity in the country. The second place for the region was Mexico City with 22.75 million inhabitants. Brazil's cities Brazil is home to two large metropolises, only counting the population within the city limits, São Paulo had approximately 11.45 million inhabitants, and Rio de Janeiro around 6.21 million inhabitants. It also contains a number of smaller, but well known cities such as Brasília, Salvador, Belo Horizonte and many others, which report between 2 and 3 million inhabitants each. As a result, the country's population is primarily urban, with nearly 88 percent of inhabitants living in cities. Mexico City Mexico City's metropolitan area ranks sevenths in the ranking of most populated cities in the world. Founded over the Aztec city of Tenochtitlan in 1521 after the Spanish conquest as the capital of the Viceroyalty of New Spain, the city still stands as one of the most important in Latin America. Nevertheless, the preeminent economic, political, and cultural position of Mexico City has not prevented the metropolis from suffering the problems affecting the rest of the country, namely, inequality and violence. Only in 2023, the city registered a crime incidence of 52,723 reported cases for every 100,000 inhabitants and around 24 percent of the population lived under the poverty line.

A dataset listing Georgia cities by population for 2024.

A dataset listing New Mexico cities by population for 2024.

In 2022, approximately 11.45 million people lived in São Paulo, making it the largest municipality in Brazil and one of the most populous cities in the world. The homonymous state of São Paulo was also the most populous federal entity in the country.

Brazil's cities

Brazil is home to two large metropolises: São Paulo with close to 11.45 million inhabitants, and Rio de Janeiro with around 6.21 million inhabitants. It also contains a number of smaller, but well known cities such as Brasília, Salvador, Belo Horizonte and many others, which report between 2 and 3 million inhabitants each. As a result, the country's population is primarily urban, with nearly 85 percent of inhabitants living in cities.

While smaller than some of the other cities, Brasília was chosen to be the capital because of its relatively central location. The city is also well-known for its modernist architecture and utopian city plan which is quite controversial - criticized by many and praised by others.

Sports venues capitals

A number of Brazil’s medium-sized and large cities were chosen as venues for the 2014 World Cup, and the 2015 Summer Olympics also took place in Rio de Janeiro. Both of these events required large sums of money to support infrastructure and enhance mobility within a number of different cities across the country. Billions of dollars were spent on the 2014 World Cup, which went primarily to stadium construction and renovation, but also to a number of different mobility projects. Other short-term spending on infrastructure for the World Cup and the Rio Olympic Games was estimated at around 50 billion U.S. dollars. While these events have poured a lot of money into urban infrastructure, a number of social and economic problems within the country remain unsolved.

A dataset listing Maine cities by population for 2024.

A dataset listing Indiana cities by population for 2024.

A dataset listing Colorado cities by population for 2024.

A dataset listing New York cities by population for 2024.

A dataset listing Iowa cities by population for 2024.

A dataset listing Washington cities by population for 2024.

A dataset listing Wisconsin cities by population for 2024.

A dataset listing Louisiana cities by population for 2024.

The statistic depicts the ten largest cities in Mexico in 2020. In 2020, Mexico City had around 8.84 million residents which made it the largest city in Mexico.

Population of Mexico

Mexico is a federal republic located in North America, sharing borders with the United States to the north, and to the southeast with Guatemala and Belize. With a total area of over 1.9 million square kilometers, it is the fourteenth largest nation in the world and the fifth largest in the Americas.

In 2014, Mexico’s total population amounted to approximately 120 million people. A little under two thirds of Mexico’s total population is of Mestizo ethnicity. The total population has steadily grown over the past decade, despite being the source to the largest migration flow between countries in the world; in 2010, around 11.6 million immigrants from Mexico lived in the United States. The migration flow between the United States and Mexico has however, decreased over the past ten years: Between 1995 and 2000, over 2.9 million migrants emigrated from Mexico to the United States. This was more than the double of migrants who emigrated from Mexico to the United States between 2005 and 2010. Each year, Mexico's population grows by about 1.24 percent compared to the previous year. Mexico City, the country’s capital and largest city, is home to approximately 8.6 million people.

Motivation

In the United States, city governments provide many services: they run public school districts, administer certain welfare and health programs, build roads and manage airports, provide police and fire protection, inspect buildings, and often run water and utility systems. Cities also get revenues through certain local taxes, various fees and permit costs, sale of property, and through the fees they charge for the utilities they run.

It would be interesting to compare all these expenses and revenues across cities and over time, but also quite difficult. Cities share many of these service responsibilities with other government agencies: in one particular city, some roads may be maintained by the state government, some law enforcement provided by the county sheriff, some schools run by independent school districts with their own tax revenue, and some utilities run by special independent utility districts. These governmental structures vary greatly by state and by individual city. It would be hard to make a fair comparison without taking into account all these differences.

This dataset takes into account all those differences. The Lincoln Institute of Land Policy produces what they call “Fiscally Standardized Cities” (FiSCs), aggregating all services provided to city residents regardless of how they may be divided up by different government agencies and jurisdictions. Using this, we can study city expenses and revenues, and how the proportions of different costs vary over time.

Data

The dataset tracks over 200 American cities between 1977 and 2020. Each row represents one city for one year. Revenue and expenditures are broken down into more than 120 categories.

Values are available for FiSCs and also for the entities that make it up: the city, the county, independent school districts, and any special districts, such as utility districts. There are hence five versions of each variable, with suffixes indicating the entity. For example, taxes gives the FiSC’s tax revenue, while taxes_city, taxes_cnty, taxes_schl, and taxes_spec break it down for the city, county, school districts, and special districts.

The values are organized hierarchically. For example, taxes is the sum of tax_property (property taxes), tax_sales_general (sales taxes), tax_income (income tax), and tax_other (other taxes). And tax_income is itself the sum of tax_income_indiv (individual income tax) and tax_income_corp (corporate income tax) subcategories.

Variable Description

• year Year for these values
• city_name Name of the city, such as “AK: Anchorage”, where “AK” is the standard two-letter abbreviation for Alaska
• city_population Estimated city population, based on Census data
• county_name Name of the county the city is in
• county_population Estimated county population, based on Census data
• cpi Consumer Price Index for this year, scaled so that 2020 is 1.
• relationship_city_school Type of school district. 1: City-wide independent school district that serves the entire city. 2: County-wide independent school district that serves the entire county. 3: One or more independent school districts whose boundaries extend beyond the city. 4: School district run by or dependent on the city. 5: School district run by or dependent on the county.
• enrollment Estimated number of public school students living in the city.
• districts_in_city Estimated number of school districts in the city.
• consolidated_govt Whether the city has a consolidated city-county government (1 = yes, 0 = no). For example, Philadelphia’s city and county government are the same entity; they are not separate governments.
• id2_city 12-digit city identifier, from the Annual Survey of State and Local Government Finances
• id2_county 12-digit county identifier
• city_types Two types: core and legacy. There are 150 core cities, “including the two largest cities in each state, plus all cities with populations of 150,000+ in 1980 and 200,000+ in 2010”. Legacy cities include “95 cities with population declines of at least 20 percent from their peak, poverty rates exceeding the national average, and a peak population of at least 50,000”. Some cities are both (denoted “core

The revenue and expenses variables are described in this detailed table. Further documentation is available on the FiSC Database website, linked in References below.

All monetary data is already adjusted for inflation, and is given in terms of 2020 US dollars per capita. The Consumer Price Index is provided for each year if you prefer to use numbers not adjusted for inflation, scaled so that 2020 is 1; simply divide each value by the CPI to get the value in that year’s nominal dollars. The total population is also provided if you want total values instead of per-capita values.

Questions

• Do some exploratory data analysis. Are there any outlying cities? Any interesting trends and rela...

A dataset listing Montana cities by population for 2024.

A dataset listing Virginia cities by population for 2024.

About this dataset

Context

This list ranks the 4 cities in the Dunn County, ND by White population, as estimated by the United States Census Bureau. It also highlights population changes in each cities over the past five years.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:

• 2019-2023 American Community Survey 5-Year Estimates
• 2018-2022 American Community Survey 5-Year Estimates
• 2017-2021 American Community Survey 5-Year Estimates
• 2016-2020 American Community Survey 5-Year Estimates
• 2015-2019 American Community Survey 5-Year Estimates

Variables / Data Columns

• Rank by White Population: This column displays the rank of cities in the Dunn County, ND by their White population, using the most recent ACS data available.
• cities: The cities for which the rank is shown in the previous column.
• White Population: The White population of the cities is shown in this column.
• % of Total cities Population: This shows what percentage of the total cities population identifies as White. Please note that the sum of all percentages may not equal one due to rounding of values.
• % of Total Dunn County White Population: This tells us how much of the entire Dunn County, ND White population lives in that cities. Please note that the sum of all percentages may not equal one due to rounding of values.
• 5 Year Rank Trend: TThis column displays the rank trend across the last 5 years.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

A dataset listing Mississippi cities by population for 2024.

Not many studies have documented climate and air quality changes of settlements at early stages of development. This is because high quality climate and air quality records are deficient for the periods of the early 18th century to mid 20th century when many U.S. cities were formed and grew. Dramatic landscape change induces substantial local climate change during the incipient stage of development. Rapid growth along the urban fringe in Phoenix, coupled with a fine-grained climate monitoring system, provide a unique opportunity to study the climate impacts of urban development as it unfolds. Generally, heat islands form, particularly at night, in proportion to city population size and morphological characteristics. Drier air is produced by replacement of the countryside's moist landscapes with dry, hot urbanized surfaces. Wind is increased due to turbulence induced by the built-up urban fabric and its morphology; although, depending on spatial densities of buildings on the land, wind may also decrease. Air quality conditions are worsened due to increased city emissions and surface disturbances. Depending on the diversity of microclimates in pre-existing rural landscapes and the land-use mosaic in cities, the introduction of settlements over time and space can increase or decrease the variety of microclimates within and near urban regions. These differences in microclimatic conditions can influence variations in health, ecological, architectural, economic, energy and water resources, and quality-of-life conditions in the city. Therefore, studying microclimatic conditions which change in the urban fringe over time and space is at the core of urban ecological goals as part of LTER aims. In analyzing Phoenix and Baltimore long-term rural/urban weather and climate stations, Brazel et al. (In progress) have discovered that long-term (i.e., 100 years) temperature changes do not correlate with populations changes in a linear manner, but rather in a third-order nonlinear response fashion. This nonlinear temporal change is consistent with the theories in boundary layer climatology that describe and explain the leading edge transition and energy balance theory. This pattern of urban vs. rural temperature response has been demonstrated in relation to spatial range of city sizes (using population data) for 305 rural vs. urban climate stations in the U.S. Our recent work on the two urban LTER sites has shown that a similar climate response pattern also occurs over time for climate stations that were initially located in rural locations have been overrun bu the urban fringe and subsequent urbanization (e.g., stations in Baltimore, Mesa, Phoenix, and Tempe). Lack of substantial numbers of weather and climate stations in cities has previously precluded small-scale analyses of geographic variations of urban climate, and the links to land-use change processes. With the advent of automated weather and climate station networks, remote-sensing technology, land-use history, and the focus on urban ecology, researchers can now analyze local climate responses as a function of the details of land-use change. Therefore, the basic research question of this study is: How does urban climate change over time and space at the place of maximum disturbance on the urban fringe? Hypotheses 1. Based on the leading edge theory of boundary layer climate change, largest changes should occur during the period of peak development of the land when land is being rapidly transformed from open desert and agriculture to residential, commercial, and industrial uses. 2. One would expect to observe, on average and on a temporal basis (several years), nonlinear temperature and humidity alterations across the station network at varying levels of urban development. 3. Based on past research on urban climate, one would expect to see in areas of the urban fringe, rapid changes in temperature (increases at night particularly), humidity (decreases in areas from agriculture to urban; increases from desert to urban), and wind speed (increases due to urban heating). 4. Changes of the surface climate on the urban fringe are expected to be altered as a function of various energy, moisture, and momentum control parameters, such as albedo, surface moisture, aerodynamic surface roughness, and thermal admittance. These parameters relate directly to population and land-use change (Lougeay et al. 1996).