About this dataset

Context

The dataset tabulates the data for the Excel, AL population pyramid, which represents the Excel population distribution across age and gender, using estimates from the U.S. Census Bureau American Community Survey 5-Year estimates. It lists the male and female population for each age group, along with the total population for those age groups. Higher numbers at the bottom of the table suggest population growth, whereas higher numbers at the top indicate declining birth rates. Furthermore, the dataset can be utilized to understand the youth dependency ratio, old-age dependency ratio, total dependency ratio, and potential support ratio.

Key observations

• Youth dependency ratio, which is the number of children aged 0-14 per 100 persons aged 15-64, for Excel, AL, is 40.0.
• Old-age dependency ratio, which is the number of persons aged 65 or over per 100 persons aged 15-64, for Excel, AL, is 25.8.
• Total dependency ratio for Excel, AL is 65.8.
• Potential support ratio, which is the number of youth (working age population) per elderly, for Excel, AL is 3.9.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group for the Excel population analysis. Total expected values are 18 and are define above in the age groups section.
• Population (Male): The male population in the Excel for the selected age group is shown in the following column.
• Population (Female): The female population in the Excel for the selected age group is shown in the following column.
• Total Population: The total population of the Excel for the selected age group is shown in the following column.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Excel Population by Age. You can refer the same here

The dataset for the article "The current utilization status of wearable devices in clinical research".Analyses were performed by utilizing the JMP Pro 16.10, Microsoft Excel for Mac version 16 (Microsoft).The file extension "jrp" is a file of the statistical analysis software JMP, which contains both the analysis code and the data set.In case JMP is not available, a "csv" file as a data set and JMP script, the analysis code, are prepared in "rtf" format.The "xlsx" file is a Microsoft Excel file that contains the data set and the data plotted or tabulated using Microsoft Excel functions.Supplementary Figure 1. NCT number duplication frequencyIncludes Excel file used to create the figure (Supplemental Figure 1).・Sfig1_NCT number duplication frequency.xlsxSupplementary Figure 2-5　Simple and annual time series aggregationIncludes Excel file, JMP repo file, csv dataset of JMP repo file and JMP scripts used to create the figure (Supplementary Figures 2-5).・Sfig2-5 Annual time series aggregation.xlsx・Sfig2 Study Type.jrp・Sfig4device type.jrp・Sfig3 Interventions Type.jrp・Sfig5Conditions type.jrp・Sfig2, 3 ,5_database.csv・Sfig2_JMP script_Study type.rtf・Sfig3_JMP script Interventions type.rtf・Sfig5_JMP script Conditions type.rtf・Sfig4_dataset.csv・Sfig4_JMP script_device type.rtfSupplementary Figures 6-11 Mosaic diagram of intervention by conditionSupplementary tables 4-9 Analysis of contingency table for intervention by condition JMP repot files used to create the figures(Supplementary Figures 6-11 ) and tables(Supplementary Tablea 4-9) , including the csv dataset of JMP repot files and JMP scripts.・Sfig6-11 Stable4-9 Intervention devicetype_conditions.jrp・Sfig6-11_Stable4-9_dataset.csv・Sfig6-11_Stable4-9_JMP script.rtfSupplementary Figure 12. Distribution of enrollmentIncludes Excel file, JMP repo file, csv dataset of JMP repo file and JMP scripts used to create the figure (Supplementary Figures 12).・Sfig12_Distribution of enrollment.jrp・Sfig12_Distribution of enrollment.csv・Sfig12_JMP script.rtf

Abstract

The documentation covers Enterprise Survey panel datasets that were collected in Slovenia in 2009, 2013 and 2019.

The Slovenia ES 2009 was conducted between 2008 and 2009. The Slovenia ES 2013 was conducted between March 2013 and September 2013. Finally, the Slovenia ES 2019 was conducted between December 2018 and November 2019. The objective of the Enterprise Survey is to gain an understanding of what firms experience in the private sector.

As part of its strategic goal of building a climate for investment, job creation, and sustainable growth, the World Bank has promoted improving the business environment as a key strategy for development, which has led to a systematic effort in collecting enterprise data across countries. The Enterprise Surveys (ES) are an ongoing World Bank project in collecting both objective data based on firms' experiences and enterprises' perception of the environment in which they operate.

Geographic coverage

National

Analysis unit

The primary sampling unit of the study is the establishment. An establishment is a physical location where business is carried out and where industrial operations take place or services are provided. A firm may be composed of one or more establishments. For example, a brewery may have several bottling plants and several establishments for distribution. For the purposes of this survey an establishment must take its own financial decisions and have its own financial statements separate from those of the firm. An establishment must also have its own management and control over its payroll.

Universe

As it is standard for the ES, the Slovenia ES was based on the following size stratification: small (5 to 19 employees), medium (20 to 99 employees), and large (100 or more employees).

Kind of data

Sample survey data [ssd]

Sampling procedure

The sample for Slovenia ES 2009, 2013, 2019 were selected using stratified random sampling, following the methodology explained in the Sampling Manual for Slovenia 2009 ES and for Slovenia 2013 ES, and in the Sampling Note for 2019 Slovenia ES.

Three levels of stratification were used in this country: industry, establishment size, and oblast (region). The original sample designs with specific information of the industries and regions chosen are included in the attached Excel file (Sampling Report.xls.) for Slovenia 2009 ES. For Slovenia 2013 and 2019 ES, specific information of the industries and regions chosen is described in the "The Slovenia 2013 Enterprise Surveys Data Set" and "The Slovenia 2019 Enterprise Surveys Data Set" reports respectively, Appendix E.

For the Slovenia 2009 ES, industry stratification was designed in the way that follows: the universe was stratified into manufacturing industries, services industries, and one residual (core) sector as defined in the sampling manual. Each industry had a target of 90 interviews. For the manufacturing industries sample sizes were inflated by about 17% to account for potential non-response cases when requesting sensitive financial data and also because of likely attrition in future surveys that would affect the construction of a panel. For the other industries (residuals) sample sizes were inflated by about 12% to account for under sampling in firms in service industries.

For Slovenia 2013 ES, industry stratification was designed in the way that follows: the universe was stratified into one manufacturing industry, and two service industries (retail, and other services).

Finally, for Slovenia 2019 ES, three levels of stratification were used in this country: industry, establishment size, and region. The original sample design with specific information of the industries and regions chosen is described in "The Slovenia 2019 Enterprise Surveys Data Set" report, Appendix C. Industry stratification was done as follows: Manufacturing – combining all the relevant activities (ISIC Rev. 4.0 codes 10-33), Retail (ISIC 47), and Other Services (ISIC 41-43, 45, 46, 49-53, 55, 56, 58, 61, 62, 79, 95).

For Slovenia 2009 and 2013 ES, size stratification was defined following the standardized definition for the rollout: small (5 to 19 employees), medium (20 to 99 employees), and large (more than 99 employees). For stratification purposes, the number of employees was defined on the basis of reported permanent full-time workers. This seems to be an appropriate definition of the labor force since seasonal/casual/part-time employment is not a common practice, except in the sectors of construction and agriculture.

For Slovenia 2009 ES, regional stratification was defined in 2 regions. These regions are Vzhodna Slovenija and Zahodna Slovenija. The Slovenia sample contains panel data. The wave 1 panel “Investment Climate Private Enterprise Survey implemented in Slovenia” consisted of 223 establishments interviewed in 2005. A total of 57 establishments have been re-interviewed in the 2008 Business Environment and Enterprise Performance Survey.

For Slovenia 2013 ES, regional stratification was defined in 2 regions (city and the surrounding business area) throughout Slovenia.

Finally, for Slovenia 2019 ES, regional stratification was done across two regions: Eastern Slovenia (NUTS code SI03) and Western Slovenia (SI04).

Mode of data collection

Computer Assisted Personal Interview [capi]

Research instrument

Questionnaires have common questions (core module) and respectfully additional manufacturing- and services-specific questions. The eligible manufacturing industries have been surveyed using the Manufacturing questionnaire (includes the core module, plus manufacturing specific questions). Retail firms have been interviewed using the Services questionnaire (includes the core module plus retail specific questions) and the residual eligible services have been covered using the Services questionnaire (includes the core module). Each variation of the questionnaire is identified by the index variable, a0.

Response rate

Survey non-response must be differentiated from item non-response. The former refers to refusals to participate in the survey altogether whereas the latter refers to the refusals to answer some specific questions. Enterprise Surveys suffer from both problems and different strategies were used to address these issues.

Item non-response was addressed by two strategies: a- For sensitive questions that may generate negative reactions from the respondent, such as corruption or tax evasion, enumerators were instructed to collect the refusal to respond as (-8). b- Establishments with incomplete information were re-contacted in order to complete this information, whenever necessary. However, there were clear cases of low response.

For 2009 and 2013 Slovenia ES, the survey non-response was addressed by maximizing efforts to contact establishments that were initially selected for interview. Up to 4 attempts were made to contact the establishment for interview at different times/days of the week before a replacement establishment (with similar strata characteristics) was suggested for interview. Survey non-response did occur but substitutions were made in order to potentially achieve strata-specific goals. Further research is needed on survey non-response in the Enterprise Surveys regarding potential introduction of bias.

For 2009, the number of contacted establishments per realized interview was 6.18. This number is the result of two factors: explicit refusals to participate in the survey, as reflected by the rate of rejection (which includes rejections of the screener and the main survey) and the quality of the sample frame, as represented by the presence of ineligible units. The relatively low ratio of contacted establishments per realized interview (6.18) suggests that the main source of error in estimates in the Slovenia may be selection bias and not frame inaccuracy.

For 2013, the number of realized interviews per contacted establishment was 25%. This number is the result of two factors: explicit refusals to participate in the survey, as reflected by the rate of rejection (which includes rejections of the screener and the main survey) and the quality of the sample frame, as represented by the presence of ineligible units. The number of rejections per contact was 44%.

Finally, for 2019, the number of interviews per contacted establishments was 9.7%. This number is the result of two factors: explicit refusals to participate in the survey, as reflected by the rate of rejection (which includes rejections of the screener and the main survey) and the quality of the sample frame, as represented by the presence of ineligible units. The share of rejections per contact was 75.2%.

About this dataset

Context

The dataset tabulates the data for the Excel, AL population pyramid, which represents the Excel population distribution across age and gender, using estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates. It lists the male and female population for each age group, along with the total population for those age groups. Higher numbers at the bottom of the table suggest population growth, whereas higher numbers at the top indicate declining birth rates. Furthermore, the dataset can be utilized to understand the youth dependency ratio, old-age dependency ratio, total dependency ratio, and potential support ratio.

Key observations

• Youth dependency ratio, which is the number of children aged 0-14 per 100 persons aged 15-64, for Excel, AL, is 61.2.
• Old-age dependency ratio, which is the number of persons aged 65 or over per 100 persons aged 15-64, for Excel, AL, is 26.9.
• Total dependency ratio for Excel, AL is 88.1.
• Potential support ratio, which is the number of youth (working age population) per elderly, for Excel, AL is 3.7.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group for the Excel population analysis. Total expected values are 18 and are define above in the age groups section.
• Population (Male): The male population in the Excel for the selected age group is shown in the following column.
• Population (Female): The female population in the Excel for the selected age group is shown in the following column.
• Total Population: The total population of the Excel for the selected age group is shown in the following column.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Excel Population by Age. You can refer the same here

Context

This notebook serves to showcase my problem solving ability, knowledge of the data analysis process, proficiency with Excel and its various tools and functions, as well as my strategic mindset and statistical prowess. This project consist of an auditing prompt provided by Hive Data, a raw Excel data set, a cleaned and audited version of the raw Excel data set, and my description of my thought process and knowledge used during completion of the project. The prompt can be found below:

Hive Data Audit Prompt

The raw data that accompanies the prompt can be found below:

Hive Annotation Job Results - Raw Data

^ These are the tools I was given to complete my task. The rest of the work is entirely my own.

To summarize broadly, my task was to audit the dataset and summarize my process and results. Specifically, I was to create a method for identifying which "jobs" - explained in the prompt above - needed to be rerun based on a set of "background facts," or criteria. The description of my extensive thought process and results can be found below in the Content section.

Content

Brendan Kelley April 23, 2021

Hive Data Audit Prompt Results

This paper explains the auditing process of the “Hive Annotation Job Results” data. It includes the preparation, analysis, visualization, and summary of the data. It is accompanied by the results of the audit in the excel file “Hive Annotation Job Results – Audited”.

Observation

The “Hive Annotation Job Results” data comes in the form of a single excel sheet. It contains 7 columns and 5,001 rows, including column headers. The data includes “file”, “object id”, and the pseudonym for five questions that each client was instructed to answer about their respective table: “tabular”, “semantic”, “definition list”, “header row”, and “header column”. The “file” column includes non-unique (that is, there are multiple instances of the same value in the column) numbers separated by a dash. The “object id” column includes non-unique numbers ranging from 5 to 487539. The columns containing the answers to the five questions include Boolean values - TRUE or FALSE – which depend upon the yes/no worker judgement.

Use of the COUNTIF() function reveals that there are no values other than TRUE or FALSE in any of the five question columns. The VLOOKUP() function reveals that the data does not include any missing values in any of the cells.

Assumptions

Based on the clean state of the data and the guidelines of the Hive Data Audit Prompt, the assumption is that duplicate values in the “file” column are acceptable and should not be removed. Similarly, duplicated values in the “object id” column are acceptable and should not be removed. The data is therefore clean and is ready for analysis/auditing.

Preparation

The purpose of the audit is to analyze the accuracy of the yes/no worker judgement of each question according to the guidelines of the background facts. The background facts are as follows:

• A table that is a definition list should automatically be tabular and also semantic • Semantic tables should automatically be tabular • If a table is NOT tabular, then it is definitely not semantic nor a definition list • A tabular table that has a header row OR header column should definitely be semantic

These background facts serve as instructions for how the answers to the five questions should interact with one another. These facts can be re-written to establish criteria for each question:

For tabular column: - If the table is a definition list, it is also tabular - If the table is semantic, it is also tabular

For semantic column: - If the table is a definition list, it is also semantic - If the table is not tabular, it is not semantic - If the table is tabular and has either a header row or a header column...

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling. Each file contains annual total releases for the past ten years by media (air, water or land), broken-down by province, industry or substance. Files are in .CSV format. The results can be further broken down using the pre-defined search available at the bottom of the NPRI Data Search webpage. The results returned by the NPRI search engine may differ from the numbers contained in the downloadable files. The online search engine’s results will display releases, disposals and transfers reported by facilities, but does not distinguish between media type (i.e. air, water, land). It also displays facilities reporting only under Ontario Regulation 127/01 and facilities submitting “did not meet criteria” reports. Please consult the following resources to enhance your analysis: - Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html Supplemental Information More NPRI datasets and mapping products are available here: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/access.html Supporting Projects: National Pollutant Release Inventory (NPRI)

Abstract

The harmonized data set on health, created and published by the ERF, is a subset of Iraq Household Socio Economic Survey (IHSES) 2012. It was derived from the household, individual and health modules, collected in the context of the above mentioned survey. The sample was then used to create a harmonized health survey, comparable with the Iraq Household Socio Economic Survey (IHSES) 2007 micro data set.

----> Overview of the Iraq Household Socio Economic Survey (IHSES) 2012:

Iraq is considered a leader in household expenditure and income surveys where the first was conducted in 1946 followed by surveys in 1954 and 1961. After the establishment of Central Statistical Organization, household expenditure and income surveys were carried out every 3-5 years in (1971/ 1972, 1976, 1979, 1984/ 1985, 1988, 1993, 2002 / 2007). Implementing the cooperation between CSO and WB, Central Statistical Organization (CSO) and Kurdistan Region Statistics Office (KRSO) launched fieldwork on IHSES on 1/1/2012. The survey was carried out over a full year covering all governorates including those in Kurdistan Region.

The survey has six main objectives. These objectives are:

1. Provide data for poverty analysis and measurement and monitor, evaluate and update the implementation Poverty Reduction National Strategy issued in 2009.
2. Provide comprehensive data system to assess household social and economic conditions and prepare the indicators related to the human development.
3. Provide data that meet the needs and requirements of national accounts.
4. Provide detailed indicators on consumption expenditure that serve making decision related to production, consumption, export and import.
5. Provide detailed indicators on the sources of households and individuals income.
6. Provide data necessary for formulation of a new consumer price index number.

The raw survey data provided by the Statistical Office were then harmonized by the Economic Research Forum, to create a comparable version with the 2006/2007 Household Socio Economic Survey in Iraq. Harmonization at this stage only included unifying variables' names, labels and some definitions. See: Iraq 2007 & 2012- Variables Mapping & Availability Matrix.pdf provided in the external resources for further information on the mapping of the original variables on the harmonized ones, in addition to more indications on the variables' availability in both survey years and relevant comments.

Geographic coverage

National coverage: Covering a sample of urban, rural and metropolitan areas in all the governorates including those in Kurdistan Region.

Analysis unit

1- Household/family. 2- Individual/person.

Universe

The survey was carried out over a full year covering all governorates including those in Kurdistan Region.

Kind of data

Sample survey data [ssd]

Sampling procedure

----> Design:

Sample size was (25488) household for the whole Iraq, 216 households for each district of 118 districts, 2832 clusters each of which includes 9 households distributed on districts and governorates for rural and urban.

----> Sample frame:

Listing and numbering results of 2009-2010 Population and Housing Survey were adopted in all the governorates including Kurdistan Region as a frame to select households, the sample was selected in two stages: Stage 1: Primary sampling unit (blocks) within each stratum (district) for urban and rural were systematically selected with probability proportional to size to reach 2832 units (cluster). Stage two: 9 households from each primary sampling unit were selected to create a cluster, thus the sample size of total survey clusters was 25488 households distributed on the governorates, 216 households in each district.

----> Sampling Stages:

In each district, the sample was selected in two stages: Stage 1: based on 2010 listing and numbering frame 24 sample points were selected within each stratum through systematic sampling with probability proportional to size, in addition to the implicit breakdown urban and rural and geographic breakdown (sub-district, quarter, street, county, village and block). Stage 2: Using households as secondary sampling units, 9 households were selected from each sample point using systematic equal probability sampling. Sampling frames of each stages can be developed based on 2010 building listing and numbering without updating household lists. In some small districts, random selection processes of primary sampling may lead to select less than 24 units therefore a sampling unit is selected more than once , the selection may reach two cluster or more from the same enumeration unit when it is necessary.

Mode of data collection

Face-to-face [f2f]

Research instrument

----> Preparation:

The questionnaire of 2006 survey was adopted in designing the questionnaire of 2012 survey on which many revisions were made. Two rounds of pre-test were carried out. Revision were made based on the feedback of field work team, World Bank consultants and others, other revisions were made before final version was implemented in a pilot survey in September 2011. After the pilot survey implemented, other revisions were made in based on the challenges and feedbacks emerged during the implementation to implement the final version in the actual survey.

----> Questionnaire Parts:

The questionnaire consists of four parts each with several sections: Part 1: Socio – Economic Data: - Section 1: Household Roster - Section 2: Emigration - Section 3: Food Rations - Section 4: housing - Section 5: education - Section 6: health - Section 7: Physical measurements - Section 8: job seeking and previous job

Part 2: Monthly, Quarterly and Annual Expenditures: - Section 9: Expenditures on Non – Food Commodities and Services (past 30 days). - Section 10 : Expenditures on Non – Food Commodities and Services (past 90 days). - Section 11: Expenditures on Non – Food Commodities and Services (past 12 months). - Section 12: Expenditures on Non-food Frequent Food Stuff and Commodities (7 days). - Section 12, Table 1: Meals Had Within the Residential Unit. - Section 12, table 2: Number of Persons Participate in the Meals within Household Expenditure Other Than its Members.

Part 3: Income and Other Data: - Section 13: Job - Section 14: paid jobs - Section 15: Agriculture, forestry and fishing - Section 16: Household non – agricultural projects - Section 17: Income from ownership and transfers - Section 18: Durable goods - Section 19: Loans, advances and subsidies - Section 20: Shocks and strategy of dealing in the households - Section 21: Time use - Section 22: Justice - Section 23: Satisfaction in life - Section 24: Food consumption during past 7 days

Part 4: Diary of Daily Expenditures: Diary of expenditure is an essential component of this survey. It is left at the household to record all the daily purchases such as expenditures on food and frequent non-food items such as gasoline, newspapers…etc. during 7 days. Two pages were allocated for recording the expenditures of each day, thus the roster will be consists of 14 pages.

Cleaning operations

----> Raw Data:

Data Editing and Processing: To ensure accuracy and consistency, the data were edited at the following stages: 1. Interviewer: Checks all answers on the household questionnaire, confirming that they are clear and correct. 2. Local Supervisor: Checks to make sure that questions has been correctly completed. 3. Statistical analysis: After exporting data files from excel to SPSS, the Statistical Analysis Unit uses program commands to identify irregular or non-logical values in addition to auditing some variables. 4. World Bank consultants in coordination with the CSO data management team: the World Bank technical consultants use additional programs in SPSS and STAT to examine and correct remaining inconsistencies within the data files. The software detects errors by analyzing questionnaire items according to the expected parameter for each variable.

----> Harmonized Data:

• The SPSS package is used to harmonize the Iraq Household Socio Economic Survey (IHSES) 2007 with Iraq Household Socio Economic Survey (IHSES) 2012.
• The harmonization process starts with raw data files received from the Statistical Office.
• A program is generated for each dataset to create harmonized variables.
• Data is saved on the household and individual level, in SPSS and then converted to STATA, to be disseminated.

Response rate

Iraq Household Socio Economic Survey (IHSES) reached a total of 25488 households. Number of households refused to response was 305, response rate was 98.6%. The highest interview rates were in Ninevah and Muthanna (100%) while the lowest rates were in Sulaimaniya (92%).

File List Herrera-et-al-supplemental-information-data-set-used-in-analyses.txt -- (MD5: d99808cfe4ebc5bff6c4c8b75fdfaf56) Description Database used for statistical and graphical analysis described in the main text. It includes all the computational data for Fisher’s alpha, Shannon diversity, Morisita-Horn, and Sorensen’s (both qualitative and quantitative) similarity.

  Column definitions:

   1.  Taxonomic order of OTU
   2. Genus and species epithet of OTU
   3. OTU number 
   4, 6, 8, 10, 12. Identity of plant in 5 mm plots. (SSc = Sevilleta Sporobolus cryptandrus) # = plot number
   5, 7, 9,11, 13. Proportion sequences of that OTU in that plant (column) in July.
   14. Total number of sequences of that fungal OTU in the 5 mm plots in July
   15. Contig number in sequencher. 1 = presence of OTU in a contig
   16. Singletons. 1 = only one sequence of this OTU obtained
   17. Proportion of sequences of row OTU in all plants in 5 mm plots in July
   18. Total number of sequences of that OTU in 5 mm plots squared in July
   19. Proportion of sequences of row OTU in all plants in 5 mm plots
   20. Proportion multiplied by log of that same proportion).
   21–37. repeat information from columns 3–20 except the information describes plants and OTUs sampled from 20 mm plots.
   38–50. repeat information from columns 3–20 except the information describes plants and OTUs sampled from 0 mm (control) plots.
   51. July summary of information of total number of sequences of that fungal OTU in all three plots (0, 5, 20 mm)
   52. July summary of information from all three plots regarding whether that fungal OTU is present in a contig.
   53. July summary of information from all three plots regarding whether that fungal OTU is present as a singleton.
   54. July summary of information of total number of sequences of that fungal OTU in all three plots (0, 5, 20 mm) squared 
   55. July summary of the proportion of sequences of row OTU in all plants in all three plots (0, 5, 20 mm). 
   56. Proportion from column 55 multiplied by log of that same proportion.
   57–109. Repeats information except values now represent data obtained in August
   110–115. Repeats information except values now represent summary data obtained for both July and August.
   116. Blank column
   117–131. Multiplied squared values from pair-wise columns and rows used to calculate similarity indices. J = June, A = August, 0,5,20 correspond to mm of water added to each plot. For example, J5/J20 (column 117) corresponds to the product of the squared values for that OTU (row) obtained from plants in June from the 5mm and 20mm plots.
   132–133. Blank columns
   134–141. Matrix of Morisita-Horn and Sorensen’s (qualitative and quantitive) and similarity indices comparing pair-wise communities of fungi obtained from different plants: 0,5,20 mm plots obtained in July and August. 


 Checksum values are:
 Columns 5, 7, and 17 = 1 All proportions of sequences from all OTUs in two plants (columns 5 and 7) and overall for July (17).

The Metropolitan Lagos dataset consists of the files (i) tsetimi_lagos_dataset.sav and (ii) tsetimi_lagos_dataset.xlxs. The two files contain the same number of records (377) and same information. The first file is in IBM SPSS database format while the second is in Microsoft Excel spreadsheet format. The SPSS database format can be accessed in the data view of SPSS. The fieldnames, field descriptions and field types are self-contained in the SPSS database file.

The dataset is part of a nationwide survey on the problems associated with electricity distribution and generation in Nigeria. A pilot survey [1] of this research was conducted in Delta State South-South, Nigeria. The files for the pilot survey are available in [2]. The survey for the Lagos data set was conducted by means of a well-structured questionnaire administered by trained interviewers. The questionnaire for the research collected information on respondents’ bio-data, experience with the services of their distribution companies and observed problems on electricity distribution from the fieldwork. The perception ratings on the services of distributions companies from the electricity customers was on a five-point scale based on the following metrics adapted from [3]: i. Overall satisfaction with services of distribution company; ii. Quality and reliability of power from distribution company; iii. Reasonableness of bills from distribution company; iv. Billing system of distribution company; v. Corporate image of distribution company; vi. Effectiveness of Communication of distribution company with stakeholders; vii. Customers service of the distribution company. The respondents scored the metrics between 0 and 5 inclusive depending on their perception on the above metrics. The scores of the respondents on the observed problems were based on the following items listed below: i. Low voltage; ii. Incessant power outages; iii. Load Shedding; iv. Inadequate number of meters; v. Inadequate distribution lines; vi. Unreasonable price of power; vii. Illegal connections; viii. Inadequate number of transformers; ix. Stealing of Distribution facilities; The respondents assign a score between 0 and 10 inclusive depending on their perception on the level of severity of the observed problems.

References [1] J. Tsetimi, A. O. Atonuje and E. J. Mamadu. An Analysis of a Pilot Survey of the Problems of Electricity Distribution in Delta State, Nigeria. Transactions of Nigerian Institution of Mathematical Physics. 2020; 12(7): 109-116 [2] J. Tsetimi. Customers' Problems with Electricity Distribution in Delta State Nigeria, [dataset], Mendeley Data, V1, doi: 10.17632/msrhyv489k.1. 2020. Accessed 16th February, 2021. Available: http://dx.doi.org/10.17632/msrhyv489k.1 [3] D. Smith, S. Nayak, M. Karig, I. Kosnik, M. Konya, K. Lovett, Z. Liu, and H.Luvai. Assessing Residential Customer Satisfaction for Large Electric Utilities. UMSL, Department of Economics Working Papers. (2011).

About this dataset

Context

The dataset tabulates the data for the Excel Township, Minnesota population pyramid, which represents the Excel township population distribution across age and gender, using estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates. It lists the male and female population for each age group, along with the total population for those age groups. Higher numbers at the bottom of the table suggest population growth, whereas higher numbers at the top indicate declining birth rates. Furthermore, the dataset can be utilized to understand the youth dependency ratio, old-age dependency ratio, total dependency ratio, and potential support ratio.

Key observations

• Youth dependency ratio, which is the number of children aged 0-14 per 100 persons aged 15-64, for Excel Township, Minnesota, is 25.7.
• Old-age dependency ratio, which is the number of persons aged 65 or over per 100 persons aged 15-64, for Excel Township, Minnesota, is 37.7.
• Total dependency ratio for Excel Township, Minnesota is 63.5.
• Potential support ratio, which is the number of youth (working age population) per elderly, for Excel Township, Minnesota is 2.7.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group for the Excel township population analysis. Total expected values are 18 and are define above in the age groups section.
• Population (Male): The male population in the Excel township for the selected age group is shown in the following column.
• Population (Female): The female population in the Excel township for the selected age group is shown in the following column.
• Total Population: The total population of the Excel township for the selected age group is shown in the following column.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Excel township Population by Age. You can refer the same here

BackgroundTrachoma is a leading infectious cause of blindness and of significant public health concern targeted for elimination. This study aimed to systematically summarize the magnitude of active trachoma among children aged 1–9 in Ethiopia from 2019–2024.MethodsThe review was prospectively registered on PROSPERO (Registration number: CRD42024514026). Database searches were conducted on Google Scholar, SCOPUS, PubMed, EMBASE, and Africans Journals Online (AJOL) for studies published between January 2019–31-March-2024 and with restriction to articles published only in English. Data extraction was done using a pre-prepared Excel sheet. STATA version 17 was used to perform the analysis. Heterogeneity between studies was assessed using I2 statistics and Cochrane Q. Qualitative synthesis was done to summarize the studies and random effect model was used to estimate the Pooled magnitude of active trachoma with a corresponding 95% confidence interval.ResultsA total of 17 studies with 19793 subjects were included in the meta-analysis. The pooled magnitude of active trachoma among children aged 1–9 years was found to be 18.4% (95% CI: 13.88, 22.91). We found a statistically significant heterogeneity between studies. Among the regions, Southwest region was found to have the highest magnitude (44.1%) (95%CI: 41.8%, 46.4%) and Dire Dawa was found to have the lowest (4.3%) (95%CI: 2.9%, 5.7%).ConclusionThe magnitude of active trachoma is still higher than the World Health Organization (WHO) target for elimination. There was significant interregional difference in magnitude of active trachoma. Strengthening surgical treatment for trichiasis, antibiotic therapy, facial hygiene, and environmental improvement (SAFE) strategy and health education and promotion is recommended.

Recent studies have suggested that high levels of social support can encourage better health behaviours and result in improved cardiovascular health. In this study we evaluated the association between social support and ideal cardiovascular health among urban Jamaicans. We conducted a cross-sectional study among urban residents in Jamaica’s south-east health region. Socio-demographic data and information on cigarette smoking, physical activity, dietary practices, blood pressure, body size, cholesterol, and glucose, were collected by trained personnel. The outcome variable, ideal cardiovascular health, was defined as having optimal levels of ≥5 of these characteristics (ICH-5) according to the American Heart Association definitions. Social support exposure variables included number of friends (network size), number of friends willing to provide loans (instrumental support) and number of friends providing advice (informational support). Principal component analysis was used to create a social support score using these three variables. Survey-weighted logistic regression models were used to evaluate the association between ICH-5 and social support score. Analyses included 841 participants (279 males, 562 females) with mean age of 47.6 ± 18.42 years. ICH-5 prevalence was 26.6% (95%CI 22.3, 31.0) with no significant sex difference (male 27.5%, female 25.7%). In sex-specific, multivariable logistic regression models, social support score, was inversely associated with ICH-5 among males (OR 0.67 [95%CI 0.51, 0.89], p = 0.006) but directly associated among females (OR 1.26 [95%CI 1.04, 1.53], p = 0.020) after adjusting for age and community SES. Living in poorer communities was also significantly associated with higher odds of ICH-5 among males, while living communities with high property value was associated with higher odds of ICH among females. In this study, higher level of social support was associated with better cardiovascular health among women, but poorer cardiovascular health among men in urban Jamaica. Further research should explore these associations and identify appropriate interventions to promote cardiovascular health.

Excel spreadsheet with numerical data for Figs 3 and 5–7.

Data from each figure is compiled in a sheet of the same name. P values for all analysis in each figure are summarized in the sheet subsequent to the corresponding figure. (XLSX)