United States US: Rural Population: % of Total Population data was reported at 17.942 % in 2017. This records a decrease from the previous number of 18.138 % for 2016. United States US: Rural Population: % of Total Population data is updated yearly, averaging 24.985 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 30.004 % in 1960 and a record low of 17.942 % in 2017. United States US: Rural Population: % of Total Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Population and Urbanization Statistics. Rural population refers to people living in rural areas as defined by national statistical offices. It is calculated as the difference between total population and urban population.; ; World Bank staff estimates based on the United Nations Population Division's World Urbanization Prospects: 2018 Revision.; Weighted average;

In 2020, about 82.66 percent of the total population in the United States lived in cities and urban areas. As the United States was one of the earliest nations to industrialize, it has had a comparatively high rate of urbanization over the past two centuries. The urban population became larger than the rural population during the 1910s, and by the middle of the century it is expected that almost 90 percent of the population will live in an urban setting. Regional development of urbanization in the U.S. The United States began to urbanize on a larger scale in the 1830s, as technological advancements reduced the labor demand in agriculture, and as European migration began to rise. One major difference between early urbanization in the U.S. and other industrializing economies, such as the UK or Germany, was population distribution. Throughout the 1800s, the Northeastern U.S. became the most industrious and urban region of the country, as this was the main point of arrival for migrants. Disparities in industrialization and urbanization was a key contributor to the Union's victory in the Civil War, not only due to population sizes, but also through production capabilities and transport infrastructure. The Northeast's population reached an urban majority in the 1870s, whereas this did not occur in the South until the 1950s. As more people moved westward in the late 1800s, not only did their population growth increase, but the share of the urban population also rose, with an urban majority established in both the West and Midwest regions in the 1910s. The West would eventually become the most urbanized region in the 1960s, and over 90 percent of the West's population is urbanized today. Urbanization today New York City is the most populous city in the United States, with a population of 8.3 million, while California has the largest urban population of any state. California also has the highest urbanization rate, although the District of Columbia is considered 100 percent urban. Only four U.S. states still have a rural majority, these are Maine, Mississippi, Montana, and West Virginia.

United States US: Rural Population Growth data was reported at -0.374 % in 2017. This records a decrease from the previous number of -0.313 % for 2016. United States US: Rural Population Growth data is updated yearly, averaging 0.083 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 1.223 % in 1971 and a record low of -0.554 % in 1999. United States US: Rural Population Growth data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Population and Urbanization Statistics. Rural population refers to people living in rural areas as defined by national statistical offices. It is calculated as the difference between total population and urban population.; ; World Bank staff estimates based on the United Nations Population Division's World Urbanization Prospects: 2018 Revision.; Weighted average;

Rural population (% of total population) in United States was reported at 16.48 % in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. United States - Rural population - actual values, historical data, forecasts and projections were sourced from the World Bank on August of 2025.

This map's colors indicate which population is larger in each area: urban (green) or rural (yellow). The map's layers contain total population counts by sex, age, and race groups for Nation, State Legislative Districts Upper, State Legislative Districts Lower, Congressional District in the United States and Puerto Rico.The U.S. Census designates each census block as part of an urban area or as rural. Larger geographies in this map such as block group, tract, county and state can therefore have a mix of urban and rural population. This map illustrates the 100% urban areas in dark green, and 100% rural areas in dark yellow. Areas with mixed urban/rural population have softer shades of green or yellow, to give a visual indication of where change may be happening. From the Census:"The Census Bureau’s urban-rural classification is a delineation of geographic areas, identifying both individual urban areas and the rural area of the nation. The Census Bureau’s urban areas represent densely developed territory, and encompass residential, commercial, and other non-residential urban land uses. The Census Bureau delineates urban areas after each decennial census by applying specified criteria to decennial census and other data. Rural encompasses all population, housing, and territory not included within an urban area.For the 2020 Census, an urban area will comprise a densely settled core of census blocks that meet minimum housing unit density and/or population density requirements. This includes adjacent territory containing non-residential urban land uses. To qualify as an urban area, the territory identified according to criteria must encompass at least 2,000 housing units or have a population of at least 5,000." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

United States US: Rural Population data was reported at 58,440,535.000 Person in 2017. This records a decrease from the previous number of 58,659,368.000 Person for 2016. United States US: Rural Population data is updated yearly, averaging 59,251,956.500 Person from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 61,656,881.000 Person in 1990 and a record low of 54,047,876.000 Person in 1969. United States US: Rural Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Population and Urbanization Statistics. Rural population refers to people living in rural areas as defined by national statistical offices. It is calculated as the difference between total population and urban population. Aggregation of urban and rural population may not add up to total population because of different country coverages.; ; World Bank staff estimates based on the United Nations Population Division's World Urbanization Prospects: 2018 Revision.; Sum;

In 2023, there were approximately ***** million people living in rural areas in the United States, while about ****** million people were living in urban areas. Within the provided time period, the number of people living in urban U.S. areas has increased significantly since totaling only ****** million in 1960.

Summary File 1 (SF1) Urban/Rural Update contains summary statistics on population and housing subjects derived from the responses to the 2010 Census questionnaire. Population items include sex, age, race, Hispanic or Latino origin, household relationship, household type, household size, family type, family size, and group quarters. Housing items include occupancy status, vacancy status, and tenure (whether a housing unit is owner-occupied or renter-occupied). The summary statistics are presented in 333 tables, which are tabulated for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature), including, but not limited to, regions, divisions, states, metropolitan/micropolitan statistical areas, counties, county subdivisions, places, congressional districts, American Indian Areas, Alaska Native Areas, Hawaiian Home Lands, ZIP Code tabulation areas, census tracts, block groups, and blocks. There are 177 population tables and 58 housing tables shown down to the block level; 84 population tables and 4 housing tables shown down to the census tract level; and 10 population tables shown down to the county level. Some of the summary areas are iterated for "geographic components" or portions of geographic areas, e.g., the principal city of a metropolitan statistical area (MSA) or the urban and rural portions of a MSA. With one variable per table cell and additional variables with geographic information, the collection comprises 2,597 data files, 49 per state, the District of Columbia, Puerto Rico, and the National File. The Census Bureau released SF1 in three stages: initial release, National Update, and Urban/Rural Update. The National Update added summary levels for the United States, regions, divisions, and geographic areas that cross state lines such as Combined Statistical Areas. This update adds urban and rural population and housing unit counts, summary levels for urban areas and the urban/rural components of census tracts and block groups, geographic components involving urbanized areas and urban clusters, and two new tables (household type by relationship for the population 65 years and over and a new tabulation of the total population by race). The initial release and National Update is available as ICPSR 33461. ICPSR supplies this data collection in 54 ZIP archives. There is a separate archive for each state, the District of Columbia, Puerto Rico, and the National File. The last archive contains a Microsoft Access database shell and additional documentation files besides the codebook.

In 2025, the degree of urbanization worldwide was at 58 percent. North America, Latin America, and the Caribbean were the regions with the highest level of urbanization, with over four-fifths of the population residing in urban areas. The degree of urbanization defines the share of the population living in areas defined as "cities". On the other hand, less than half of Africa's population lives in urban settlements. Globally, China accounts for over one-quarter of the built-up areas of more than 500,000 inhabitants. The definition of a city differs across various world regions - some countries count settlements with 100 houses or more as urban, while others only include the capital of a country or provincial capitals in their count. Largest agglomerations worldwideThough North America is the most urbanized continent, no U.S. city was among the top ten urban agglomerations worldwide in 2023. Tokyo-Yokohama in Japan was the largest urban area in the world that year, with 37.7 million inhabitants. New York ranked 13th, with 21.4 million inhabitants. Eight of the 10 most populous cities are located in Asia. ConnectivityIt may be hard to imagine how the reality will look in 2050, with 70 percent of the global population living in cities, but some statistics illustrate the ways urban living differs from suburban and rural living. American urbanites may lead more “connected” (i.e., internet-connected) lives than their rural and/or suburban counterparts. As of 2021, around 89 percent of people living in urban areas owned a smartphone. Internet usage was also higher in cities than in rural areas. On the other hand, rural areas always have, and always will, attract those who want to escape the rush of the city.

About this dataset

Context

The dataset tabulates the Rural Valley population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Rural Valley. The dataset can be utilized to understand the population distribution of Rural Valley by age. For example, using this dataset, we can identify the largest age group in Rural Valley.

Key observations

The largest age group in Rural Valley, PA was for the group of age 60 to 64 years years with a population of 173 (18.62%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Rural Valley, PA was the 35 to 39 years years with a population of 15 (1.61%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Rural Valley is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Rural Valley total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Rural Valley Population by Age. You can refer the same here

Rural population growth (annual %) in United States was reported at --0.33134 % in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. United States - Rural population growth (annual %) - actual values, historical data, forecasts and projections were sourced from the World Bank on August of 2025.

CLICK ON THE ABOVE IMAGE TO LAUNCH THE MAP - Healthcare access issues vary greatly between urban and rural areas of New Mexico. Launch the map to explore alternate ways to classify geographies as urban or rural. These classifications are often used for food access as well as healthcare access.BIBLIOGRAPHY WITH LINKS:US Census Bureau, Urban Area - Urban Cluster FAQ - https://www2.census.gov/geo/pdfs/reference/ua/2010ua_faqs.pdfAre the problems with Rural areas actually just a result of definitions that change?: "When a rural county grows, it transmutes into an urban one." - The real (surprisingly comforting) reason rural America is doomed to decline, https://www.washingtonpost.com/business/2019/05/24/real-surprisingly-comforting-reason-rural-america-is-doomed-decline/ (See also the complete study - http://programme.exordo.com/2018annualmeeting/delegates/presentation/130/ )Rural Definitions for Health Policy, Harvey Licht, a presentation for the University of New Mexico Center for Health Policy: : http://nmcdc.maps.arcgis.com/home/item.html?id=7076f283b8de4bb69bf3153bc42e0402Rural Definitions for Health Policy, update of 2019, Harvey Licht, a presentation to the NMDOH Quarterly Epidemiology Meeting, November, 2019 - http://www.arcgis.com/home/item.html?id=a60a73f4e5614eb3ab01e2f96227ce4bNew Mexico Rural-Urban Counties Comparison Tables - October 2017, Harvey Licht, A preliminary compilation for the National Conference of State Legislators Rural Health Plan Taskforce : https://nmcdc.maps.arcgis.com/home/item.html?id=d3ca56e99f8b45c58522b2f9e061999eNew Mexico Rural Health Plan - Report of the Rural Health Planning Workgroup convened by the NM Department of Health 2018-2019 - http://nmcdc.maps.arcgis.com/home/item.html?id=d4b9b66a5ca34ec9bbe90efd9562586aFrontier and Remote Areas Zip Code Map - http://nmcdc.maps.arcgis.com/home/webmap/viewer.html?webmap=56b4005256244499a58f863c17bbac8aHOUSING ISSUES, RURAL & URBAN, 2017 - http://nmcdc.maps.arcgis.com/home/webmap/viewer.html?webmap=3e3aeabc04ac4672994e25a1ec94df83FURTHER READING:What is Rural? Rural Health Information Hub: https://www.ruralhealthinfo.org/topics/what-is-ruralDefining Rural. Research and Training Center on Disability in Rural Communities: http://rtc.ruralinstitute.umt.edu/resources/defining-rural/What is Rural? USDA: https://www.ers.usda.gov/topics/rural-economy-population/rural-classifications/what-is-rural/National Center for Health Statistics Urban–Rural Classification Scheme: https://www.cdc.gov/nchs/data_access/urban_rural.htm.Health-Related Behaviors by Urban-Rural County Classification — United States, 2013, CDC: https://www.cdc.gov/mmwr/volumes/66/ss/ss6605a1.htm?s_cid=ss6605a1_wExtending Work on Rural Health Disparities, The Journal of Rural Health: http://onlinelibrary.wiley.com/doi/10.1111/jrh.12241/fullMinority Populations Driving Community Growth in the Rural West, Headwaters Economics: https://headwaterseconomics.org/economic-development/trends-performance/minority-populations-driving-county-growth/ Methodology - https://headwaterseconomics.org/wp-content/uploads/Minorities_Methods.pdfThe Role of Medicaid in Rural America, Kaiser Family Foundation: http://www.kff.org/medicaid/issue-brief/the-role-of-medicaid-in-rural-america/The Future of the Frontier: Water, Energy & Climate Change in America’s Most Remote Communities: http://frontierus.org/wp-content/uploads/2017/09/FUTURE-OF-THE-FRONTIER_Final-Version_Spring-2017.pdfRural and Urban Differences in Passenger-Vehicle–Occupant Deaths and Seat Belt Use Among Adults — United States, 2014, CDC: https://www.cdc.gov/mmwr/volumes/66/ss/ss6617a1.htm

Each year, the Forecasting and Trends Office (FTO) publishes population estimates and future year projections based on the population estimates developed by the Bureau of Economic and Business Research (BEBR) at the University of Florida. This dataset contains boundaries for each county’s 2010 rural (non-urban) area in the State of Florida with 2020 census population and 2021 population estimates. The population estimates can be used for a variety of planning studies including statewide and regional transportation plan updates, subarea and corridor studies, and funding allocations for various planning agencies.Each year, the Forecasting and Trends Office (FTO) publishes population estimates and future year projections. The population estimates can be used for a variety of planning studies including statewide and regional transportation plan updates, subarea and corridor studies, and funding allocations for various planning agencies.The 2020 population estimates reported are based on the US Census Bureau 2020 Decennial Census. The 2021 population estimates are based on the population estimates developed by the Bureau of Economic and Business Research (BEBR) at the University of Florida. BEBR uses the decennial census count for April 1, 2020, as the starting point for state-level projections. More information is available from BEBR here.This dataset contains boundaries for each county’s 2010 rural (non-urban) area in the State of Florida with 2020 census population and 2021 population estimates. All legal boundaries and names in this dataset are from the US Census Bureau’s TIGER/Line Files (2021).For the 2010 Census, urban areas comprised a “densely settled core of census tracts and/or census blocks that meet minimum population density requirements, along with adjacent territory containing non-residential urban land uses as well as territory with low population density included to link outlying densely settled territory with the densely settled core.” “Rural” encompasses all population, housing, and territory not included within an urban area. Please see the Data Dictionary for more information on data fields. Data Sources:US Census Bureau 2020 Decennial CensusUS Census Bureau’s TIGER/Line Files (2021)Bureau of Economic and Business Research (BEBR) – Florida Estimates of Population 2021 Data Coverage: StatewideData Time Period: 2020 – 2021 Date of Publication: July 2022 Point of Contact:Dana Reiding, ManagerForecasting and Trends OfficeFlorida Department of TransportationDana.Reiding@dot.state.fl.us605 Suwannee Street, Tallahassee, Florida 32399850-414-4719

Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, the decennial census is the official source of population totals for April 1st of each decennial year. In between censuses, the Census Bureau's Population Estimates Program produces and disseminates the official estimates of the population for the nation, states, counties, cities, and towns and estimates of housing units and the group quarters population for states and counties..Information about the American Community Survey (ACS) can be found on the ACS website. Supporting documentation including code lists, subject definitions, data accuracy, and statistical testing, and a full list of ACS tables and table shells (without estimates) can be found on the Technical Documentation section of the ACS website.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2023 American Community Survey 1-Year Estimates.ACS data generally reflect the geographic boundaries of legal and statistical areas as of January 1 of the estimate year. For more information, see Geography Boundaries by Year..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Users must consider potential differences in geographic boundaries, questionnaire content or coding, or other methodological issues when comparing ACS data from different years. Statistically significant differences shown in ACS Comparison Profiles, or in data users' own analysis, may be the result of these differences and thus might not necessarily reflect changes to the social, economic, housing, or demographic characteristics being compared. For more information, see Comparing ACS Data..One person in each household is designated as the householder. In most cases, this is the person or one of the people in whose name the home is owned, being bought, or rented and who is listed on line one of the survey questionnaire. If there is no such person in the household, any adult household member 15 years old and over could be designated as the householder.Households are classified by type according to the presence of relatives. Two types of householders are distinguished: a family householder and a nonfamily householder. A family householder is a householder living with one or more individuals related to him or her by birth, marriage, or adoption. The householder and all people in the household related to him or her are family members. A nonfamily householder is a householder living alone or with non-relatives only.To determine poverty status of a householder in family households, one compares the total income in the past 12 months of all family members with the poverty threshold appropriate for that family size and composition. If the total family income is less than the threshold, then the householder together with every member of his or her family are considered as having income below the poverty level.In determining poverty status of a nonfamily householder, only the householder's own personal income is compared with the appropriate threshold for a single person. The poverty status of a nonfamily householder does not affect the poverty status of the other unrelated individuals living in the household and the incomes of people living in the household who are not related to the householder are not considered when determining the poverty status of a householder. The income of each unrelated individual is compared to the appropriate threshold for a single person..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on 2020 Census data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..Explanation of Symbols:- The estimate could not be computed because there were an insufficient number of sample observations. For a ratio of medians estimate, one or both of the median estimates falls in the lowest interval or highest interval of an open-ended distribution. For a 5-year median estimate, the margin of error associated with a median was larger than the median itself.N The estimate or margin of error can...

This layer represents USDA Food Access Research Atlas data at the census tract geography. Low Income is defined as tracts with a poverty rate of 20% or higher, or tracts with median family income less than 80% of median family income of the state or metropolitan area. Low Access is defined as tracts where a significant number or share of residents is more than 1 mile (urban) or 10 miles (rural) from the nearest supermarket.http://www.ers.usda.gov/data-products/food-access-research-atlas/go-to-the-atlas.aspxFood accessLimited access to supermarkets, supercenters, grocery stores, or other sources of healthy and affordable food may make it harder for some Americans to eat a healthy diet. There are many ways to measure food store access for individuals and for neighborhoods, and many ways to define which areas are food deserts—neighborhoods that lack healthy food sources. Most measures and definitions take into account at least some of the following indicators of access:Accessibility to sources of healthy food, as measured by distance to a store or by the number of stores in an area.Individual-level resources that may affect accessibility, such as family income or vehicle availability.Neighborhood-level indicators of resources, such as the average income of the neighborhood and the availability of public transportation.In the Food Access Research Atlas, several indicators are available to measure food access along these dimensions. For example, users can choose alternative distance markers to measure low access in a neighborhood, such as the number and share of people more than half a mile to a supermarket or 1 mile to a supermarket. Users can also view other census-tract-level characteristics that provide context on food access in neighborhoods, such as whether the tract has a high percentage of households far from supermarkets and without vehicles, individuals with low income, or people residing in group quarters.Low-income neighborhoodsThe criteria for identifying a census tract as low income are from the Department of Treasury’s New Markets Tax Credit (NMTC) program. This program defines a low-income census tract as any tract where:The tract’s poverty rate is 20 percent or greater; orThe tract’s median family income is less than or equal to 80 percent of the State-wide median family income; orThe tract is in a metropolitan area and has a median family income less than or equal to 80 percent of the metropolitan area's median family income.Low-access census tractsIn the Food Access Research Atlas, low access to healthy food is defined as being far from a supermarket, supercenter, or large grocery store ("supermarket" for short). A census tract is considered to have low access if a significant number or share of individuals in the tract is far from a supermarket.In the original Food Desert Locator, low access was measured as living far from a supermarket, where 1 mile was used in urban areas and 10 miles was used in rural areas to demarcate those who are far from a supermarket. In urban areas, about 70 percent of the population was within 1 mile of a supermarket, while in rural areas over 90 percent of the population was within 10 miles (see Access to Affordable and Nutritious Food: Updated Estimates of Distance to Supermarkets Using 2010 Data). Updating the original 1- and 10-mile low-access measure shows that an estimated 18.3 million people in these low-income and low-access census tracts were far from a supermarket in 2010.Three additional measures of food access based on distance to a supermarket are provided in the Atlas:One additional measure applies a 0.5-mile demarcation in urban areas and a 10-mile distance in rural areas. Using this measure, an estimated 52.5 million people, or 17 percent of the U.S. population, have low access to a supermarket;A second measure applies a 1.0-mile demarcation in urban areas and a 20-mile distance in rural areas. Under this measure, an estimated 16.5 million people, or 5.3 percent of the U.S. population, have low access to a supermarket; andA slightly more complex measure incorporates vehicle access directly into the measure, delineating low-income tracts in which a significant number of households are located far from a supermarket and do not have access to a vehicle. This measure also includes census tracts with populations that are so remote, that, even with a vehicle, driving to a supermarket may be considered a burden due to the great distance. Using this measure, an estimated 2.1 million households, or 1.8 percent of all households, in low-income census tracts are far from a supermarket and do not have a vehicle. An additional 0.3 million people are more than 20 miles from a supermarket.For each of the first three measures that are based solely on distance, a tract is designated as low access if the aggregate number of people in the census tract with low access is at least 500 or the percentage of people in the census tract with low access is at least 33 percent. For the final measure using vehicle availability, a tract is designated as having low vehicle access if at least one of the following is true:at least 100 households are more than ½ mile from the nearest supermarket and have no access to a vehicle; orat least 500 people or 33 percent of the population live more than 20 miles from the nearest supermarket, regardless of vehicle access.Methods used to assess distance to the nearest supermarket are the same for each of these measures. First, the entire country is divided into ½-km square grids, and data on the population are aerially allocated to these grids (see Access to Affordable and Nutritious Food: Updated Estimates of Distance to Supermarkets Using 2010 Data). Then, distance to the nearest supermarket is measured for each grid cell by calculating the distance between the geographic center of the ½-km square grid that contains estimates of the population (number of people and other subgroup characteristics) and the center of the grid with the nearest supermarket.Once the distance to the nearest supermarket is calculated for each grid cell, the estimated number of people or housing units that are more than 1 mile from a supermarket in urban tracts, or 10 miles in rural census tracts, is aggregated at the census-tract level (and similarly for the alternative distance markers). A census tract is considered rural if the population-weighted centroid of that tract is located in an area with a population of less than 2,500; all other tracts are considered urban tracts.Food desertsThe Food Access Research Atlas maps census tracts that are both low income (li) and low access (la), as measured by the different distance demarcations. This tool provides researchers and other users multiple ways to understand the characteristics that can contribute to food deserts, including income level, distance to supermarkets, and vehicle access.Additional tract-level indicators of accessVehicle availabilityA tract is identified as having low vehicle availability if more than 100 households in the tract report having no vehicle available and are more than 0.5 miles from the nearest supermarket. This corresponds closely to the 80th percentile of the distribution of the number of housing units in a census tract without vehicles at least 0.5 miles from a supermarket (the 80th percentile value was 106 housing units). This means that about 20 percent of all census tracts had more than 100 housing units that were 0.5 miles from a supermarket and without a vehicle. This indicator was applied to both urban and rural census tracts.Overall, 8.8 percent of all housing units in the United States do not have a vehicle, and 4.2 percent of all housing units are at least 0.5 mile from a store and without a vehicle. Vehicle availability is defined in the American Community Survey as the number of passenger cars, vans, or trucks with a capacity of 1-ton or less kept at the home and available for use by household members. The number of available vehicles includes those vehicles leased or rented for at least 1 month, as well as company, police, or government vehicles that are kept at home and available for non-business use.Whether a vehicle is available to a household for private use is an important additional indicator of access to healthy and affordable food. For households living far from a supermarket or large grocery store, access to a private vehicle may make accessing these retailers easier than relying on public or alternative means of transportation.Group quarters populationUsers may be interested in highlighting tracts with large shares of people living in group quarters. Group quarters are residential arrangements where an entity or organization owns and provides housing (and often services) for individuals residing in these buildings. This includes college dormitories, military quarters, correctional facilities, homeless shelters, residential treatment centers, and assisted living or skilled nursing facilities. These living arrangements frequently provide dining and food retail solely for their residents. While individuals living in these areas may appear to be far from a supermarket or grocery store, they may not truly experience difficulty accessing healthy and affordable food. Tracts in which 67 percent of individuals or more live in group quarters are highlighted.General tract characteristicsPopulation, tract totalGeographic level: census tractYear of data: 2010Definition: Total number of individuals residing in a tract.Data sources: Data are from the 2012 report, Access to Affordable and Nutritious Food: Updated Estimates of Distances to Supermarkets Using 2010 Data. Population data are reported at the block level from the 2010 Census of Population and Housing. These data were aerially allocated down to ½-kilometer-square grids across the United States.Low-income tractGeographic level: census tractYear of data: 2010Definition: A tract with either a poverty rate of 20

Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Technical Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities, and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2017 American Community Survey (ACS) data generally reflect the July 2015 Office of Management and Budget (OMB) delineations of metropolitan and micropolitan statistical areas, in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB delineations due to differences in the effective dates of the geographic entities..Caution should be used when comparing data for computer and Internet use before and after 2016. Changes in 2016 to the questions involving the wording as well as the response options resulted in changed response patterns in the data. Most noticeable are increases in overall computer ownership or use, the total of Internet subscriptions, satellite subscriptions, and cellular data plans for a smartphone or other mobile device. For more detailed information about these changes, see the 2016 American Community Survey Content Test Report for Computer and Internet Use located at https://www.census.gov/programs-surveys/acs/methodology/content-test.htm or the user note regarding changes in the 2016 questions located at https://www.census.gov/programs-surveys/acs/technical-documentation/user-notes.html.."With a computer" includes those who said "Yes" to at least one of the following types of computers: Desktop or laptop; smartphone; tablet or other portable wireless computer; or some other type of computer..An Internet "subscription" refers to a type of service that someone pays for to access the Internet such as a cellular data plan, broadband such as cable, fiber optic or DSL, or other type of service. This will normally refer to a service that someone is billed for directly for Internet alone or sometimes as part of a bundle..The category "with a broadband Internet subscription" refers to those who said "Yes" to at least one of the following types of Internet subscriptions: Broadband such as cable, fiber optic, or DSL; a cellular data plan; satellite; or a fixed wireless subscription..Data about computer and Internet use were collected by asking respondents to select "Yes" or "No" to each type of computer and each type of Internet subscription. Therefore, respondents were able to select more than one type of computer and more than one type of Internet subscription..Logical coverage edits applying a rules-based assignment of Medicaid, Medicare and military health coverage were added as of 2009 -- please see https://www.census.gov/library/working-papers/2010/demo/coverage_edits_final.html for more details. The 2008 data table in American FactFinder does not incorporate these edits. The...

About this dataset

Context

The dataset tabulates the Rural Valley population over the last 20 plus years. It lists the population for each year, along with the year on year change in population, as well as the change in percentage terms for each year. The dataset can be utilized to understand the population change of Rural Valley across the last two decades. For example, using this dataset, we can identify if the population is declining or increasing. If there is a change, when the population peaked, or if it is still growing and has not reached its peak. We can also compare the trend with the overall trend of United States population over the same period of time.

Key observations

In 2022, the population of Rural Valley was 818, a 0.73% decrease year-by-year from 2021. Previously, in 2021, Rural Valley population was 824, a decline of 0.48% compared to a population of 828 in 2020. Over the last 20 plus years, between 2000 and 2022, population of Rural Valley decreased by 188. In this period, the peak population was 1,006 in the year 2000. The numbers suggest that the population has already reached its peak and is showing a trend of decline. Source: U.S. Census Bureau Population Estimates Program (PEP).

Content

When available, the data consists of estimates from the U.S. Census Bureau Population Estimates Program (PEP).

Data Coverage:

• From 2000 to 2022

Variables / Data Columns

• Year: This column displays the data year (Measured annually and for years 2000 to 2022)
• Population: The population for the specific year for the Rural Valley is shown in this column.
• Year on Year Change: This column displays the change in Rural Valley population for each year compared to the previous year.
• Change in Percent: This column displays the year on year change as a percentage. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Rural Valley Population by Year. You can refer the same here

The 2013 Rural-Urban Continuum Codes form a classification scheme that distinguishes metropolitan counties by the population size of their metro area, and nonmetropolitan counties by degree of urbanization and adjacency to a metro area. The official Office of Management and Budget (OMB) metro and nonmetro categories have been subdivided into three metro and six nonmetro categories. Each county in the U.S. is assigned one of the 9 codes. This scheme allows researchers to break county data into finer residential groups, beyond metro and nonmetro, particularly for the analysis of trends in nonmetro areas that are related to population density and metro influence. The Rural-Urban Continuum Codes were originally developed in 1974. They have been updated each decennial since (1983, 1993, 2003, 2013), and slightly revised in 1988. Note that the 2013 Rural-Urban Continuum Codes are not directly comparable with the codes prior to 2000 because of the new methodology used in developing the 2000 metropolitan areas. See the Documentation for details and a map of the codes. An update of the Rural-Urban Continuum Codes is planned for mid-2023.

US: Rural Population Living in Areas Where Elevation is Below 5 Meters: % of Total Population data was reported at 0.249 % in 2010. This records a decrease from the previous number of 0.256 % for 2000. US: Rural Population Living in Areas Where Elevation is Below 5 Meters: % of Total Population data is updated yearly, averaging 0.249 % from Dec 1990 (Median) to 2010, with 3 observations. The data reached an all-time high of 0.256 % in 2000 and a record low of 0.246 % in 1990. US: Rural Population Living in Areas Where Elevation is Below 5 Meters: % of Total Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s USA – Table US.World Bank: Land Use, Protected Areas and National Wealth. Rural population below 5m is the percentage of the total population, living in areas where the elevation is 5 meters or less.; ; Center for International Earth Science Information Network (CIESIN)/Columbia University. 2013. Urban-Rural Population and Land Area Estimates Version 2. Palisades, NY: NASA Socioeconomic Data and Applications Center (SEDAC). http://sedac.ciesin.columbia.edu/data/set/lecz-urban-rural-population-land-area-estimates-v2.; Weighted Average;

Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2014 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2014 American Community Survey 1-Year Supplemental Estimates