The 2010 Census Production Settings Demographic and Housing Characteristics (DHC) Demonstration Noisy Measurement File (2023-06-30) is an intermediate output of the 2020 Census Disclosure Avoidance System (DAS) TopDown Algorithm (TDA) (as described in Abowd, J. et al [2022] https://doi.org/10.1162/99608f92.529e3cb9 , and implemented in https://github.com/uscensusbureau/DAS_2020_Redistricting_Production_Code). The NMF was produced using the official “production settings,” the final set of algorithmic parameters and privacy-loss budget allocations, that were used to produce the 2020 Census Redistricting Data (P.L. 94-171) Summary File and the 2020 Census Demographic and Housing Characteristics File. The NMF consists of the full set of privacy-protected statistical queries (counts of individuals or housing units with particular combinations of characteristics) of confidential 2010 Census data relating to the 2010 Demonstration Data Products Suite – Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File – Production Settings (2023-04-03). These statistical queries, called “noisy measurements” were produced under the zero-Concentrated Differential Privacy framework (Bun, M. and Steinke, T [2016] https://arxiv.org/abs/1605.02065; see also Dwork C. and Roth, A. [2014] https://www.cis.upenn.edu/~aaroth/Papers/privacybook.pdf) implemented via the discrete Gaussian mechanism (Cannone C., et al., [2023] https://arxiv.org/abs/2004.00010), which added positive or negative integer-valued noise to each of the resulting counts. The noisy measurements are an intermediate stage of the TDA prior to the post-processing the TDA then performs to ensure internal and hierarchical consistency within the resulting tables. The Census Bureau has released these 2010 Census demonstration data to enable data users to evaluate the expected impact of disclosure avoidance variability on 2020 Census data. The 2010 Census Production Settings Demographic and Housing Characteristics (DHC) Demonstration Noisy Measurement File (2023-04-03) has been cleared for public dissemination by the Census Bureau Disclosure Review Board (CBDRB-FY22-DSEP-004).

The 2010 Census Production Settings Demographic and Housing Characteristics Demonstration Noisy Measurement File includes zero-Concentrated Differentially Private (zCDP) (Bun, M. and Steinke, T [2016]) noisy measurements, implemented via the discrete Gaussian mechanism. These are estimated counts of individuals and housing units included in the 2010 Census Edited File (CEF), which includes confidential data initially collected in the 2010 Census of Population and Housing. The noisy measurements included in this file were subsequently post-processed by the TopDown Algorithm (TDA) to produce the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) (https://www2.census.gov/programs-surveys/decennial/2020/program-management/data-product-planning/2010-demonstration-data-products/04-Demonstration_Data_Products_Suite/2023-04-03/). As these 2010 Census demonstration data are intended to support study of the design and expected impacts of the 2020 Disclosure Avoidance System, the 2010 CEF records were pre-processed before application of the zCDP framework. This pre-processing converted the 2010 CEF records into the input-file format, response codes, and tabulation categories used for the 2020 Census, which differ in substantive ways from the format, response codes, and tabulation categories originally used for the 2010 Census.

The NMF provides estimates of counts of persons in the CEF by various characteristics and combinations of characteristics including their reported race and ethnicity, whether they were of voting age, whether they resided in a housing unit or one of 7 group quarters types, and their census block of residence after the addition of discrete Gaussian noise (with the scale parameter determined by the privacy-loss budget allocation for that particular query under zCDP). Noisy measurements of the counts of occupied and vacant housing units by census block are also included. Lastly, data on constraints—information into which no noise was infused by the Disclosure Avoidance System (DAS) and used by the TDA to post-process the noisy measurements into the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) —are provided.

Abstract

The 1998 Ghana Demographic and Health Survey (GDHS) is the latest in a series of national-level population and health surveys conducted in Ghana and it is part of the worldwide MEASURE DHS+ Project, designed to collect data on fertility, family planning, and maternal and child health.

The primary objective of the 1998 GDHS is to provide current and reliable data on fertility and family planning behaviour, child mortality, children’s nutritional status, and the utilisation of maternal and child health services in Ghana. Additional data on knowledge of HIV/AIDS are also provided. This information is essential for informed policy decisions, planning and monitoring and evaluation of programmes at both the national and local government levels.

The long-term objectives of the survey include strengthening the technical capacity of the Ghana Statistical Service (GSS) to plan, conduct, process, and analyse the results of complex national sample surveys. Moreover, the 1998 GDHS provides comparable data for long-term trend analyses within Ghana, since it is the third in a series of demographic and health surveys implemented by the same organisation, using similar data collection procedures. The GDHS also contributes to the ever-growing international database on demographic and health-related variables.

Geographic coverage

National

Analysis unit

• Household
• Children under five years
• Women age 15-49
• Men age 15-59

Kind of data

Sample survey data

Sampling procedure

The major focus of the 1998 GDHS was to provide updated estimates of important population and health indicators including fertility and mortality rates for the country as a whole and for urban and rural areas separately. In addition, the sample was designed to provide estimates of key variables for the ten regions in the country.

The list of Enumeration Areas (EAs) with population and household information from the 1984 Population Census was used as the sampling frame for the survey. The 1998 GDHS is based on a two-stage stratified nationally representative sample of households. At the first stage of sampling, 400 EAs were selected using systematic sampling with probability proportional to size (PPS-Method). The selected EAs comprised 138 in the urban areas and 262 in the rural areas. A complete household listing operation was then carried out in all the selected EAs to provide a sampling frame for the second stage selection of households. At the second stage of sampling, a systematic sample of 15 households per EA was selected in all regions, except in the Northern, Upper West and Upper East Regions. In order to obtain adequate numbers of households to provide reliable estimates of key demographic and health variables in these three regions, the number of households in each selected EA in the Northern, Upper West and Upper East regions was increased to 20. The sample was weighted to adjust for over sampling in the three northern regions (Northern, Upper East and Upper West), in relation to the other regions. Sample weights were used to compensate for the unequal probability of selection between geographically defined strata.

The survey was designed to obtain completed interviews of 4,500 women age 15-49. In addition, all males age 15-59 in every third selected household were interviewed, to obtain a target of 1,500 men. In order to take cognisance of non-response, a total of 6,375 households nation-wide were selected.

Note: See detailed description of sample design in APPENDIX A of the survey report.

Mode of data collection

Face-to-face

Research instrument

Three types of questionnaires were used in the GDHS: the Household Questionnaire, the Women’s Questionnaire, and the Men’s Questionnaire. These questionnaires were based on model survey instruments developed for the international MEASURE DHS+ programme and were designed to provide information needed by health and family planning programme managers and policy makers. The questionnaires were adapted to the situation in Ghana and a number of questions pertaining to on-going health and family planning programmes were added. These questionnaires were developed in English and translated into five major local languages (Akan, Ga, Ewe, Hausa, and Dagbani).

The Household Questionnaire was used to enumerate all usual members and visitors in a selected household and to collect information on the socio-economic status of the household. The first part of the Household Questionnaire collected information on the relationship to the household head, residence, sex, age, marital status, and education of each usual resident or visitor. This information was used to identify women and men who were eligible for the individual interview. For this purpose, all women age 15-49, and all men age 15-59 in every third household, whether usual residents of a selected household or visitors who slept in a selected household the night before the interview, were deemed eligible and interviewed. The Household Questionnaire also provides basic demographic data for Ghanaian households. The second part of the Household Questionnaire contained questions on the dwelling unit, such as the number of rooms, the flooring material, the source of water and the type of toilet facilities, and on the ownership of a variety of consumer goods.

The Women’s Questionnaire was used to collect information on the following topics: respondent’s background characteristics, reproductive history, contraceptive knowledge and use, antenatal, delivery and postnatal care, infant feeding practices, child immunisation and health, marriage, fertility preferences and attitudes about family planning, husband’s background characteristics, women’s work, knowledge of HIV/AIDS and STDs, as well as anthropometric measurements of children and mothers.

The Men’s Questionnaire collected information on respondent’s background characteristics, reproduction, contraceptive knowledge and use, marriage, fertility preferences and attitudes about family planning, as well as knowledge of HIV/AIDS and STDs.

Response rate

A total of 6,375 households were selected for the GDHS sample. Of these, 6,055 were occupied. Interviews were completed for 6,003 households, which represent 99 percent of the occupied households. A total of 4,970 eligible women from these households and 1,596 eligible men from every third household were identified for the individual interviews. Interviews were successfully completed for 4,843 women or 97 percent and 1,546 men or 97 percent. The principal reason for nonresponse among individual women and men was the failure of interviewers to find them at home despite repeated callbacks.

Note: See summarized response rates by place of residence in Table 1.1 of the survey report.

Sampling error estimates

The estimates from a sample survey are affected by two types of errors: (1) nonsampling errors, and (2) sampling errors. Nonsampling errors are the results of shortfalls made in implementing data collection and data processing, such as failure to locate and interview the correct household, misunderstanding of the questions on the part of either the interviewer or the respondent, and data entry errors. Although numerous efforts were made during the implementation of the 1998 GDHS to minimize this type of error, nonsampling errors are impossible to avoid and difficult to evaluate statistically.

Sampling errors, on the other hand, can be evaluated statistically. The sample of respondents selected in the 1998 GDHS is only one of many samples that could have been selected from the same population, using the same design and expected size. Each of these samples would yield results that differ somewhat from the results of the actual sample selected. Sampling errors are a measure of the variability between all possible samples. Although the degree of variability is not known exactly, it can be estimated from the survey results.

A sampling error is usually measured in terms of the standard error for a particular statistic (mean, percentage, etc.), which is the square root of the variance. The standard error can be used to calculate confidence intervals within which the true value for the population can reasonably be assumed to fall. For example, for any given statistic calculated from a sample survey, the value of that statistic will fall within a range of plus or minus two times the standard error of that statistic in 95 percent of all possible samples of identical size and design.

If the sample of respondents had been selected as a simple random sample, it would have been possible to use straightforward formulas for calculating sampling errors. However, the 1998 GDHS sample is the result of a two-stage stratified design, and, consequently, it was necessary to use more complex formulae. The computer software used to calculate sampling errors for the 1998 GDHS is the ISSA Sampling Error Module. This module uses the Taylor linearization method of variance estimation for survey estimates that are means or proportions. The Jackknife repeated replication method is used for variance estimation of more complex statistics such as fertility and mortality rates.

Data appraisal

Data Quality Tables - Household age distribution - Age distribution of eligible and interviewed women - Age distribution of eligible and interviewed men - Completeness of reporting - Births by calendar years - Reporting of age at death in days - Reporting of age at death in months

Note: See detailed tables in APPENDIX C of the survey report.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Note: For information on the codes used when processing the data in this table, see the 2020 Island Areas Censuses Technical Documentation..Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.

Note: For information on data collection, confidentiality protection, nonsampling error, and definitions, see the 2020 Island Areas Censuses Technical Documentation..Due to operational changes for military installation enumeration, the 2020 Census of Guam data tables reporting housing, social, and economic characteristics do not include housing units or populations living on Guam's U.S. military installations in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about operational changes and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation..Due to COVID-19 restrictions impacting data collection for the 2020 Census of Guam, data users should consider the following when using Guam's data products: 1) Data tables reporting social and economic characteristics do not include the group quarters population in the table universe. As a result, impacted 2020 data tables should not be compared to 2010 and other past census data tables reporting the same characteristics. The Census Bureau advises data users to verify table universes are the same before comparing data across census years. For more information about data collection limitations and the impacts on Guam's data products, see the 2020 Island Areas Censuses Technical Documentation. 2) Cells in data tables will display the letter "N" when those data are not statistically reliable. A list of the geographic areas and data tables that will not have data displayed due to data quality concerns can be found in the 2020 Island Areas Censuses Technical Documentation. 3) The Census Bureau advises that data users consider high allocation rates while using the 2020 Census of Guam's available characteristics data. Allocation rates -- a measure of item nonresponse -- are higher than past censuses. Final counts can be adversely impacted when an item's allocation rate is high, and bias can be introduced if the characteristics of the nonrespondents differ from those reported by respondents. Allocation rates for Guam's key population and housing characteristics can be found in the 2020 Island Areas Censuses Technical Documentation. .Explanation of Symbols: 1.An "-" means the statistic could not be computed because there were an insufficient number of observations. 2. An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.3. An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.4. An "N" means data are not displayed for the selected geographic area due to concerns with statistical reliability or an insufficient number of cases.5. An "(X)" means not applicable..Source: U.S. Census Bureau, 2020 Census, Guam.