Abstract

This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.

Australian Bureau of Statistics (ABS) Catalogue Number: 3218.0 Population Estimates by Local Government Area, 2011 to 2012.

Dataset History

ABS Catalogue Number 3218.0 Population Estimates by Local Government Area, 2011 to 2012.

This dataset was downloaded as a single spreadsheet file (.xls) on 29 May, 2014 from the following website: http://www.abs.gov.au/AUSSTATS/abs@.nsf/DetailsPage/3218.02011-12?OpenDocument

(Metadata taken from the Explanatory Notes section of the ABS website http://www.abs.gov.au/AUSSTATS/abs@.nsf/Lookup/3218.0Explanatory%20Notes12011-12?OpenDocument)

INTRODUCTION

1 This product contains estimates of the resident population of Statistical Areas Level 2 to 4 (SA2s - SA4s) and Greater Capital City Statistical Areas (GCCSAs) of Australia. These estimates plus those for Local Government Areas, Significant Urban Areas, Remoteness Areas and Electoral Divisions are also provided in the Downloads tab of this issue.

2 To meet the conflicting demands for accuracy and timeliness there are several versions of sub-state/territory population estimates. Preliminary estimates as at 30 June are normally available by April of the following year, revised estimates twelve months later and rebased and final estimates after the following Census. The estimates in this issue are preliminary rebased for 2011, based on the results of the 2011 Census, and preliminary for 2012.

For an ABS Glossary of Terms visit:

http://www.abs.gov.au/ausstats/abs@.nsf/Lookup/2901.0Main%20Features12011

Dataset Citation

Australian Bureau of Statistics (2013) ABS Regional Population Growth Australia 2011-2012. Bioregional Assessment Source Dataset. Viewed 29 September 2017, http://data.bioregionalassessments.gov.au/dataset/c27fc127-3743-4805-b4b6-f50712cd655f.

These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and Local Government Areas (LGAs), and are projected out from a base population as at 30 June 2022, by age and sex. Projections are for 30 June 2023 to 2032, with results disaggregated by age and sex.

Method The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) within each age-sex cohort according to the specified fertility, mortality and overseas and internal migration assumptions. The projected usual resident population by single year of age and sex was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.

Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.

Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.

Projections – Local Government Areas The base population for each LGA is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. Projections for 30 June 2023 to 2032 were created by converting from the SA2-level population projections to LGAs by age and sex. This was done using an age-specific population correspondence, where the data for each year of the projection span were converted based on 2021 population shares across SA2s. The LGA and SA2 projections are congruous in aggregation as well as in isolation. Unlike the projections prepared at SA2 level, no LGA-specific projection assumptions were used.

Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts, but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations and very small age-sex cells, especially at older ages. While these projections are calculated at the single year of age level, small numbers, and fluctuations across individual ages in the base population and projection assumptions limit the reliability of SA2-level projections at single year of age level. These fluctuations reduce and reliability improves when the projection results are aggregated to broader age groups such as the five-year age bands in this product. For areas with small elderly populations, results aggregated to 65 and over are more reliable than for the individual age groups above 65. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all, however their (small) age/sex distributions may change slightly. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections by age and sex include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state age/sex totals, being applied to their original values. SA2s and LGAs in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.

Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics If you have questions or feedback about this web service, please email geography@abs.gov.au. To subscribe to updates about ABS web services and geospatial products, please complete this form. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Population Projections, Australia, 2022 (base)

Contains projections (based on different assumptions of future fertility, mortality and migration) of the resident population of Australia, the states and territories, capital cities and balance of states, by age and sex for the base year to 2101 (for Australia) and for the base year to 2061 (for the states and territories, capital cities and balances of states). Also includes summary measures such as percentages of population in selected age groups and median ages as well as detailed notes on the assumptions used.

Australian Bureau of Statistics estimates of historic annual population growth, 1860-2015. http://www.abs.gov.au/AUSSTATS/abs@.nsf/allprimarymainfeatures/6CBA90A25BAC951DCA257F7F001CC559?opendocumentShow full descriptionAustralian Bureau of Statistics estimates of historic annual population growth, 1860-2015. http://www.abs.gov.au/AUSSTATS/abs@.nsf/allprimarymainfeatures/6CBA90A25BAC951DCA257F7F001CC559?opendocument Figure DRV2 in Drivers report. https://soe.environment.gov.au/theme/drivers/topic/population-driver-environmental-change#Figure_DRV2

This dataset contains estimates of the resident population and estimates of the components of population change as at 30 June for the years 2001-2021. The data is aggregated to the 2021 Australian Statistical Geography Standard (ASGS) Local Government Areas (LGA).

This data is sourced from the Australian Bureau of Statistics (Catalogue Number: 3218.0).

For more information please visit the Regional population methodology.

Notes: The population estimates in this issue are final for 2001 to 2016, revised for 2017 to 2020, and preliminary for 2021. Estimated resident population (ERP) is the official estimate of the Australian population, which links people to a place of usual residence within Australia. Usual residence within Australia refers to that address at which the person has lived or intends to live for six months or more in a given reference year. For the 30 June reference date, this refers to the calendar year around it. Estimated resident population is based on Census counts by place of usual residence (excluding short-term overseas visitors in Australia), with an allowance for Census net undercount, to which are added the estimated number of Australian residents temporarily overseas at the time of the Census.

AURIN has ingested this dataset in its GeoPackage format.

This dataset presents the estimates of the resident population by the 2016 Statistical Areas Level 2 (SA2). The estimates are shown for the years of 2016 and 2017 and are meant to identify the regional population growth between the years of 2016 and 2017. Estimated resident population (ERP) is the official estimate of the Australian population, which links people to a place of usual residence within Australia. Usual residence within Australia refers to that address at which the person has lived or intends to live for six months or more in a given reference year. For the 30 June reference date, this refers to the calendar year around it. This data is ABS data (catalogue number: 3218.0) available from the Australian Bureau of Statistics. For more information please visit the Explanatory Notes.

This information has been provided by the Australian Bureau of Statistics. For further information see www.abs.gov.au. Projected population growth of Australian capital cities (medium growth scenario), 2012-2061. From: Population projections, Australia, 2012 (base) to 2101, cat.no. 3222.0.

Data ued to produce Figure BLT2 in Built environment, SoE 2016. See https://soe.environment.gov.au/theme/built-environment/topic/2016/increased-urban-footprint#built-environment-figure-BLT2

This dataset presents the estimates of the resident population by the 2017 Local Government Areas (LGA). The estimates are shown for the years of 2016 and 2017 and are meant to identify the regional population growth between the years of 2016 and 2017. Estimated resident population (ERP) is the official estimate of the Australian population, which links people to a place of usual residence within Australia. Usual residence within Australia refers to that address at which the person has lived or intends to live for six months or more in a given reference year. For the 30 June reference date, this refers to the calendar year around it. This data is ABS data (catalogue number: 3218.0) available from the Australian Bureau of Statistics. For more information please visit the Explanatory Notes.

Contains latest available estimates of the resident populations of areas of Australia as at 30 June in each year . These estimates are provided for Statistical Areas Level 2 - 4 (SA2s - SA4s), Greater Capital City Statistical Areas (GCCSAs), and states and territories of Australia according to the current edition of the Australian Statistical Geography Standard (ASGS).\r \r Estimates are also provided for Local Government Areas (LGAs), Significant Urban Areas, Remoteness Areas, and Commonwealth and State Electoral Divisions.

In June 2022, it was estimated that around 7.3 percent of Australians were aged between 25 and 29, and the same applied to people aged between 30 and 34. All in all, about 55 percent of Australia’s population was aged 35 years or older as of June 2022. At the same time, the age distribution of the country also shows that the share of children under 14 years old was still higher than that of people over 65 years old. A breakdown of Australia’s population growth Australia is the sixth-largest country in the world, yet with a population of around 26 million inhabitants, it is only sparsely populated. Since the 1970s, the population growth of Australia has remained fairly constant. While there was a slight rise in the Australian death rate in 2022, the birth rate of the country decreased after a slight rise in the previous year. The fact that the birth rate is almost double the size of its death rate gives the country one of the highest natural population growth rates of any high-income country.
National distribution of the population Australia’s population is expected to surpass 28 million people by 2028. The majority of its inhabitants live in the major cities. The most populated states are New South Wales, Victoria, and Queensland. Together, they account for over 75 percent of the population in Australia.

Humans have been living on the continent of Australia (name derived from "Terra Australis"; Latin for "the southern land") for approximately 65,000 years, however population growth was relatively slow until the nineteenth century. Europeans had made some contact with Australia as early as 1606, however there was no significant attempt at settlement until the late eighteenth century. By 1800, the population of Australia was approximately 350,000 people, and the majority of these were Indigenous Australians. As colonization progressed the number of ethnic Europeans increased while the Australian Aboriginal population was decimated through conflict, smallpox and other diseases, with some communities being exterminated completely, such as Aboriginal Tasmanians. Mass migration from Britain and China After the loss of its American colonies in the 1780s, the British Empire looked to other parts of the globe to expand its sphere of influence. In Australia, the first colonies were established in Sydney, Tasmania and Western Australia. Many of these were penal colonies which became home to approximately 164,000 British and Irish convicts who were transported to Australia between 1788 and 1868. As the decades progressed, expansion into the interior intensified, and the entire country was claimed by Britain in 1826. Inland colonization led to further conflict between European settlers and indigenous Australians, which cost the lives of thousands of natives. Inward expansion also saw the discovery of many natural resources, and most notably led to the gold rushes of the 1850s, which attracted substantial numbers of Chinese migrants to Australia. This mass migration from non-European countries eventually led to some restrictive policies being introduced, culminating with the White Australia Policy of 1901, which cemented ethnic-European dominance in Australian politics and society. These policies were not retracted until the second half of the 1900s. Independent Australia Australia changed its status to a British dominion in 1901, and eventually became independent in 1931. Despite this, Australia has remained a part of the British Commonwealth, and Australian forces (ANZAC) fought with the British and their Allies in both World Wars, and were instrumental in campaigns such as Gallipoli in WWI, and the South West Pacific Theater in WWII. The aftermath of both wars had a significant impact on the Australian population, with approximately 90 thousand deaths in both world wars combined, as well as 15 thousand deaths as a result of the Spanish flu pandemic following WWI, although Australia experienced a significant baby boom following the Second World War. In the past fifty years, Australia has promoted immigration from all over the world, and now has one of the strongest economies and highest living standards in the world, with a population that has grown to over 25 million people in 2020.

This dataset presents a range of data items sourced from the Australian Bureau of Statistics (ABS). The data is derived from the November 2024 release of Data by region. Individual data items present the latest reference year data available on Data by region. This layer presents data by Local Government Areas (LGA), 2021.

The Aboriginal and Torres Strait Islander Peoples theme is based on groupings of data within Data by region. Concepts, sources and methods for each dataset can be found on the Data by region methodology page.

Topics in the Aboriginal and Torres Strait Islander Peoples theme include:

Estimated resident population Language (Census) Engagement in employment, education or training (Census) Labour force status (Census) Unpaid assistance to person with disability (Census) Unpaid childcare (Census) Voluntary work (Census) Tenure type (Census)

The Closing the Gap topics that are informed by Census data are included in the update:

Target 5: By 2031, increase the proportion of Aboriginal and Torres Strait Islander people aged 20-24 years attaining Year 12 or an equivalent qualification to 96 per cent. Target 6: By 2031, increase the proportion of Aboriginal and Torres Strait Islander people aged 25-34 years who have completed a tertiary qualification (Certificate III and above) to 70 per cent. Target 7: By 2031, increase the proportion of Aboriginal and Torres Strait Islander youth aged 15-24 years who are in employment, education or training to 67 per cent. Target 8: By 2031, increase the proportion of Aboriginal and Torres Strait Islander people aged 25-64 years who are employed to 62 per cent. Target 9A: By 2031, increase the proportion of Aboriginal and Torres Strait Islander people living in appropriately sized (not overcrowded) housing to 88 per cent.

When analysing these statistics:

Time periods, definitions, methodologies, scope, and coverage can differ across collections.
Some data values have been randomly adjusted or suppressed to avoid the release of confidential data, this means

    some small cells have been randomly set to zero
    care should be taken when interpreting cells with small numbers or zeros.

Data and geography references

Source data publication: Data by region Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3 Further information: Data by region methodology, reference period 2011-24 Source: Australian Bureau of Statistics (ABS)

Made possible by the Digital Atlas of Australia

The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics

Email geography@abs.gov.au if you have any questions or feedback about this web service.
Subscribe to get updates on ABS web services and geospatial products.

Privacy at the Australian Bureau of Statistics Read how the ABS manages personal information - ABS privacy policy.

ABS data providing summary information of the number of people by remoteness locations, 2010 and 2015. Regional population growth, Australia, 2014–15, cat. no. 3218.0,

Figure BLT1 in Built environment. https://soe.environment.gov.au/theme/built-environment/framework/introduction#built-environment-figure-BLT1

Dataset provides the population of Local Government Area's as recorded for the 2006, 2011, 2016 and 2021 Census years. Australian Bureau of Statistics extracts from ABS Tablebuilder are used for the construction of the dataset. This dataset combines the raw population data provided by the Australian Bureau of Statistics within ABS Tablebuilder for the "Persons - Place of Usual Residence" for the four Census periods and provides a calculation of the Annual Average Growth Rate and Compound Average Growth Rate for the specified periods.

Transport for NSW provides projections of population and dwellings at the small area (Travel Zone or TZ) level for NSW. The latest version is Travel Zone Projections 2024 (TZP24), released in January 2025.

TZP24 replaces the previously published TZP22.

The projections are developed to support a strategic view of NSW and are aligned with the NSW Government Common Planning Assumptions.

The TZP24 Population & Dwellings Projections dataset covers the following variables:

• Estimated Resident Population

• Structural Private Dwellings (Regional NSW only)

• Population in Occupied Private Dwellings, by 5-year Age categories & by Sex

• Population in Non-Private Dwellings

The projections in this release, TZP24, are presented annually from 2021 to 2031 and 5-yearly from 2031 to 2066, and are in TZ21 geography.

Please note, TZP24 is based on best available data as at early 2024, and the projections incorporate results of the National Census conducted by the ABS in August 2021.

Key Data Inputs used in TZP24:

• 2024 NSW Population Projections – NSW Department of Planning, Housing & Infrastructure

• 2021 Census data - Australian Bureau of Statistics (including dwellings by occupancy, total dwellings by Mesh Block, household sizes, private dwellings by occupancy, population age and gender, persons by place of usual residence)

For a summary of the TZP24 projection method please refer to the TZP24 Factsheet.

For more detail on the projection process please refer to the TZP24 Technical Guide.

Additional land use information for workforce and employment as well as Travel Zone 2021 boundaries for NSW (TZ21) and concordance files are also available for download on the Open Data Hub.

Visualisations of the population projections are available on the Transport for NSW Website under Data and research/Reference Information.

Cautions

The TZP24 dataset represents one view of the future aligned with the NSW Government Common Planning Assumptions and population and employment projections.

The projections are not based on specific assumptions about future new transport infrastructure but do take into account known land-use developments underway or planned, and strategic plans.

• TZP24 is a strategic state-wide dataset and caution should be exercised when considering results at detailed breakdowns.

• The TZP24 outputs represent a point in time set of projections (as at early 2024).

• The projections are not government targets.

• Travel Zone (TZ) level outputs are projections only and should be used as a guide. As with all small area data, aggregating of travel zone projections to higher geographies leads to more robust results.

• As a general rule, TZ-level projections are illustrative of a possible future only.

• More specific advice about data reliability for the specific variables projected is provided in the “Read Me” page of the Excel format summary spreadsheets on the TfNSW Open Data Hub.

• Caution is advised when comparing TZP24 with the previous set of projections (TZP22) due to addition of new data sources for the most recent years, and adjustments to methodology.

Further cautions and notes can be found in the TZP24 Technical Guide

Important note:

The Department of Planning, Housing & Infrastructure (DPHI) published the 2024 NSW Population Projections in November 2024. As per DPHI’s published projections, the following variables are excluded from the published TZP24 Population and Dwellings Projections:

• Structural Private Dwellings for Travel Zones in 43 councils across Greater Sydney, Illawarra-Shoalhaven, Central Coast, Lower Hunter and Greater Newcastle

• Occupied Private Dwellings for Travel Zones in NSW.

Furthermore, in TZP24, the Structural Private Dwellings variable aligns with the 2024 Implied Dwelling projections while the Occupied Private Dwellings variable aligns with the 2024 Households projections at SA2 level prepared by DPHI.

The above variables are available upon request by contacting model.selection@transport.nsw.gov.au - Attention Place Forecasting.

Urban Centres and Localities (UCL)

Urban Centres and Localities (UCLs) represent areas of concentrated urban development with populations of 200 people or more. These areas of urban development are primarily identified using dwelling and population density criteria using data from the 2021 Census. UCLs are not an official definition of towns.

UCLs can cross state or territory boundaries, however in these cases they are split into two parts so that data can still be aggregated to the state and territory level. For example, the UCL of Albury - Wodonga consists of Albury – Wodonga (Albury Part) and Albury – Wodonga (Wodonga Part).

Areas in a state or territory that are not included in an UCL are considered to be ‘rural’ and combined into the category: ‘Remainder of State/Territory’.

Using UCLs with Census data

UCLs are designed for the analysis of statistical data, particularly from the Census. The 200 minimum population size allows users to access cross classified Census data for these areas without the resulting counts becoming too small for use.

​

Australian Bureau of Statistics (Jul2021-Jun2026), Data services and APIs, ABS Website, accessed 25 July 2023.

https://www.abs.gov.au/website-privacy-copyright-and-disclaimer#copyright-and-creative-commons

This information was complied from the Australian Bureau of Statistics in Partial fullfilment of Coursework for the Master of Data Science taught at UNSW

Household income and wealth Australia, Building Activity Australia, Affordable Housing Database, National and Regional House Price Indices, Population Projections, Lending Indicators

Household income and wealth Australia ->https://www.abs.gov.au/statistics/economy/finance/household-income-and-wealth-australia/latest-release, Affordable Housing Database ->http://www.oecd.org/social/affordable-housing-database.htm, National and Regional House Price Indices ->https://stats.oecd.org/Index.aspx?DataSetCode=RHPI_TARGET, Population Projections ->https://stats.oecd.org/Index.aspx?DataSetCode=POPPROJ, Lending Indicators ->https://www.abs.gov.au/statistics/economy/finance/lending-indicators/apr-2021

Using population data from the ABS census to map Adelaide's change in population by SA2 area divisions. Included is a layer forecasting the population of areas in 2021 based on the previous surveyed years data.Pop-up data has been configured to show an area's exact population and area in km².Each layer has been symbolised to the same colours and divided by the same range to be able to differentiate between them visually.The map and data have been created by Daniel Hill and Samuel Hewitt.

This dataset contains information about the number and percentage of managers by gender and age, 15 years and over (2006-07 and 2016-17).

(a) Data was calculated as an average of four quarters (August, November, February, May) in the financial year.

(b) Occupation is classified according to the ABS Australian and New Zealand Standard Classification of Occupations (ANZSCO), 2006 (cat. no. 1220.0).

(c) Until recently, ABS policy has been to revise benchmarks for labour force data on a five-yearly basis following final rebasing of population estimates to the latest Census of Population and Housing data. However, labour force population benchmarks are now updated more frequently when preliminary population estimates become available, and again when these preliminary estimates are subsequently revised. For this release of Gender Indicators, Australia, labour force estimates dating back to (and including) 2014-15 have been revised in accordance with this new benchmarking process. Future revisions to benchmarks will then take place every time a new year of labour force data becomes available for publishing in the Gender Indicators publication. Re-benchmarking historical data has not resulted in any material change to unemployment rates, participation rates or employment to population ratios. For more information see ABS Labour Force, Australia, Jun 2016 (cat. no. 6202.0).
Source: ABS data available on request, Labour Force Survey

Data from the Australian Bureau of Statistics showing trends in waste generation, population growth and Gross Value Added (GVA), for the period 1997 - 2012.

For further information see: http://www.abs.gov.au/ausstats/abs@.nsf/Latestproducts/4602.0.55.005Main%20Features42013?opendocument

The data has been used by the Department of Environment and Energy to produce Figure LAN11 in the Land theme of Australia State of the Environment 2016, available at https://soe.environment.gov.au/theme/land/topic/2016/contemporary-land-use-pressures#land-figure-LAN11