Download .zipThe Ohio Wetlands Inventory is based on analysis of satellite data by Bruce R. Motsch and Gary M. Schaal and is intended solely as an indicator of wetland sites for which field review should be conducted. The satellite data reflect conditions during the specific year and season the data was acquired and all wetlands may not be indicated. Statistics generated from the inventory are intended solely as an approximation.

The Ohio Wetlands Inventory for Adams County was produced from April 1986 Landsat Thematic mapper data (cell size 30 meters by 30 meters) using ERDAS Image processing software. The raster data has been converted to ARC/INFO format and exported to an interchange file.

The data was originally georeferenced to UTM zone 17 coordinates NAD 27 and is also available in this coordinate system in ERDAS Imagine format.

The class of woods on hydric soils, wet meadow and farmed wetland fall on hydric soils when digital soils data is available for the county.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov Data Update Frequency: As Needed

Parcels with limited ownership information. This data set is hosted by PASDA, additional formats are available through PASDA .

This data release for the reconnaissance geologic map of the Hells Canyon Study Area, Wallowa County, Oregon, and Idaho and Adams Counties, Idaho, is a Geologic Map Schema (GeMS, 2020)-compliant version of the geologic map published in U.S. Geological Survey (USGS) Scientific Investigations Report Map SIR 2007-5046 (Simmons, et al, 2007). The database represents the geology for the 625,177-acre (2,530 square kilometers), geologically complex Hells Canyon Study Area in two plates, at a publication scale of 1:48,000. The study area includes (1) the Hells Canyon Wilderness; (2) parts of the Snake River, Rapid River, and West Fork Rapid River Wild and Scenic Rivers; (3) lands included in the second Roadless Area Review and Evaluation (RARE II); and (4) part of the Hells Canyon National Recreation Area. References: Simmons, G.C., Gualtieri, J.L., Close, T.J., Federspiel, F.E., and Leszcykowski, A.M., 2007, Mineral resources of the Hells Canyon study area, Wallowa County, Oregon, and Idaho and Adams Counties, Idaho, with a section on aeromagnetic and gravity surveys, by D.R. Mabey: U.S. Geological Survey Scientific Investigations Report 2007-5046, 62 p., https://pubs.usgs.gov/sir/2007/5046/. U.S. Geological Survey National Cooperative Geologic Mapping Program, 2020, GeMS (Geologic Map Schema) - A standard format for the digital publication of geologic maps: U.S. Geological Survey Techniques and Methods, book 11, chap. B10, 74 p., https://doi.org//10.3133/tm11B10.

Boundaries of Adams County Boroughs and Townships. This service is hosted by PASDA. Visit the data page for more information.

description: During the spring and early summer of 1994 most of Long Island, part of the Mark Twain NWR, was walked, and six east/west transects established. During July each forest type long each transect was studied using 1/2 ha plots placed perpendicular to the transects. These plots (50 m X 100 m) were divided into quadrats 25 m on a side for ease in surveying. The number, size and species of all living and dead-standing stems (10 cm dbh and above) were recorded for each of the eight quadrats. The relative dominance, relative density, and importance value (IV) Here then recorded for each species in each study area. The average diameter (cm), density (#/ha) and basal area (m2 /ha) were also calculated for each species. The data from study areas with similar structure and species composition were then combined, and five relatively distinct forest community types were determined to be present on the island.; abstract: During the spring and early summer of 1994 most of Long Island, part of the Mark Twain NWR, was walked, and six east/west transects established. During July each forest type long each transect was studied using 1/2 ha plots placed perpendicular to the transects. These plots (50 m X 100 m) were divided into quadrats 25 m on a side for ease in surveying. The number, size and species of all living and dead-standing stems (10 cm dbh and above) were recorded for each of the eight quadrats. The relative dominance, relative density, and importance value (IV) Here then recorded for each species in each study area. The average diameter (cm), density (#/ha) and basal area (m2 /ha) were also calculated for each species. The data from study areas with similar structure and species composition were then combined, and five relatively distinct forest community types were determined to be present on the island.

Geologic sample housed in Illinois State Geological Survey Natural Resources Studies Annex

Data was created based on these projects:West Adams Densification published April 1996. This GPS project was performed by John E Chance & Associates Inc. for Adams County Urban Drainage & Flood Control District and Metro Wastewater Reclamation District. Field observations were made in 1995 with the Final Report published in January 1996. The horizontal accuracy was 1:500;000 and the vertical accuracy was Third Order (NGS).The 1999 Adams County GIS Survey of Section Corners was completed by locating the Aliquot Corners (Section corners) within the westerly 1/3 of Adams County utilizing GPS Real Time Kinematic (RTK) survey techniques as part of the East Adams Densification published in November 1999. East Adams Densification horizontal accuracy was 1:500;000 and the vertical accuracy was Third Order (NGS).The horizontal coordinates are in North American Datum(NAD) 1983 (1992). The orthometric (vertical) values are in North American Vertical Datum (NAVD) 1988.

Field Note Geologist: Cox, B. B. Volume: Adams_2 Page: 83 County: Adams State: IL

Field Note Geologist: Jacobson, RJ Volume: Jacobson_RJ_1013 Page: 13 Ref ID: FH-270 County: Adams State: IL UID: PFN2020

Locations of Adams County Health Department offices.

A web map used to access tax parcel, boundary, ownership, acreage, survey, zoning and tax information. Errors and Omissions Do Exist.The information provided is for reference only and subject to independent verification. User assumes all responsibility for its use.https://www.fayette-co-oh.com/Fayette County ProfileFayette County is a county located in the U.S. state of Ohio. Its county seat is Washington Court House. Fayette County was formed on March 1, 1810 from portions of Highland County and Ross County. It was named after Marie-Joseph Motier, Marquis de La Fayette, a French general and politician who took the side of the Colonials during the American Revolutionary War and who played an important role in the French Revolution.Fayette County is a part of the Virginia Military survey, which was reserved in 1783, to be allotted to Virginia soldiers. This district includes the entire counties of Adams, Brown, Clermont, Clinton, Highland, Fayette, Madison and Union; and a portion of the counties of Scioto, Pike, Ross, Pickaway, Franklin, Delaware, Marion, Hardin, Logan, Champaign, Clarke, Greene, Warren and Hamilton.Fayette County was formed January 19, 1810 (took effect March 1st) from Ross and Highland counties. Beginning at the southwest corner of Pickaway, running north “with the line of said county to the corner of Madison; thence west with the line of said Madison county to the line of Greene county; thence south with the line of Greene county to the southeast corner thereof; thence east five miles; thence south to the line of Highland county; thence east with said line to Paint Creek; thence in a straight line to the beginning.” All the lower portion was taken from Highland and the upper from Ross.The first portion of land entered within the territory of what is now Fayette county, was a part of original surveys Nos. 243 and 772, lying partly in Clinton county. The first survey lying wholly within Fayette county was No. 463, in what is now Madison township, surveyed for Thomas Overton by John O’Bannon June 30, 1776.The original townships were Jefferson, Greene, Wayne, Madison, Paint and Union. Concord township was formed in April 1818, from Greene. Marion township was formed in June, 1840 from Madison. Perry township was formed June 4, 1845, from Wayne and Greene. Jasper township was formed from Jefferson and Concord December 2, 1845.Washington C.H. was laid out originally on a part of entry 757, which contained 1200 acres and belonged to Benjamin Temple, of Logan county, Kentucky, who donated 150 acres to Fayette county, on condition that it be used as the site of the county seat. The deed of conveyance was made December 1, 1810, by Thomas S. Hind, attorney for Temple, to Robert Stewart, who was appointed by the legislature as director for the town of Washington. The town was laid off some time between December 1, 1810, and February 26, 1811, the latter being the date of the record of the town plat.Bloomingburg (originally called New Lexington) was laid out in 1815, by Solomon Bowers, and originally contained 34 and ¾ acres. On March 4, 1816, Bowers laid out and added twenty more lots. The name of the town was later changed to Bloomingburg by act of the legislature. The town was incorporated by act of the legislature, February 5, 1847.Jeffersonville was laid out March 1, 1831, by Walter B. Write and Chipman Robinson, on 100 acres of land belonging to them, they started selling the lots at $5 each. The town incorporated March 17, 1838. The first house was erected by Robert Wyley.The first railroad, now the C. & M. V., was completed in 1852; the second, now the Detroit Southern, in 1875; the third, now the C.H. & D. in 1879; and the fourth, now the B. & O. S. W., in 1884.The first permanent settler (probably) was a Mr. Wolf who settled in what is now Wayne township, in about the year 1796. - Circa 1886 - Map of Fayette County, Ohio. Issued by the Fayette County Record.

City of Aurora, Colorado easements. Please keep in mind that this easement GIS layer must be paired with City of Aurora parcel GIS layer to show some line work. Also note that the easement layer isn't complete and continues to be worked on. The city's focus is on collecting city owned easements and not on privately owned easements. See disclaimer and terms of use. The City of Aurora, Colorado sits in three different counties: Adams County, Arapahoe County, and Douglas County and lies just east of the City and County of Denver.

City of Aurora, Colorado - Comprehensive Plan 2018: There are 10 place types throughout the city that address common land uses, including residential, commercial, open space, and community facilities. Place types are intended to depict general locations of each place type and not necessarily the land use designation of specific parcels. The City of Aurora, Colorado sits in three different counties: Adams County, Arapahoe County, and Douglas County and lies just east of the City and County of Denver.

11/22/2024- County-wide road updates were completed in Golden Valley and Billings Counties. Intersecting routes throughout the state were cartographically realigned in preparation of MIRE intersections 6/27/2024 - The data was prepared for HPMS submittal which included updated 2023 AADT values and to keep certain segments consistent with HPMS segments, mainly sample sections and the NHS, values of "BOTH", "NHS" and "SAMPLE" were added to the field HPMS_ROUTE_ID to distinguish these segments from other segments. 3/19/2024 - Miscellaneous updates were done in Dunn County. County wide updates to Grand Forks and Golden Valley counties along with route realignments at intersections throughout the state.12/04/2023 - County wide updates to Walsh, Dunn and Grand Forks Counties and various updates to county/local roads throughout the state including street names in Westhope8/23/2023 - Function Class changes were updated in McLean and Mountrail Counties. Function Class updates also occurred in the cities of Fargo, Valley City, West Fargo and Williston. County-wide updates completed for: Towner, Cavalier, Pembina, Pierce, Benson, Ramsey. 2022 AADTs updated. A road was also removed in Bottineau County at the request off a landowner.5/19/22 - Dunn County contacted the NDDOT with data updates ,Rolette County was updated, and the 2021 AADT's were updated. 2/14/22 - Contacted by the Dunn County Road Dept., updates were made on newly paved road segments. 1/20/2022 - Since the August 2021 update, Morton, Stark, Hettinger, Bowman, Adams, Slope, Grant and Sioux Counties have been updated using 2020 imagery. Surface type has been checked and updated on all functionally classified roads statewide. Function Class changes have been made in the Bismarck/Mandan Metro, Grand Forks County and Burleigh County.6/15/21 - Since the 2019 update, trails and seldom used trails were updated statewide using 2018,and 2019 imagery. Steele, Traill and Griggs Counties have also been updated using 2020 imagery. Surface type has been checked and updated on all functionally classified roads statewide New roads added includes roads in the Fargo, West Fargo, Grand Forks, Jamestown, Bismarck, Mandan, Minot, Dickinson, Watford City and Williston. Ownership on Federal jurisdiction roads were also updated based on an dataset received for FHWA in conjunction with the HPMS submittal. HPMS (Highway Performance Monitoring System) fields were also added in an effort to integrate the roads county data into HPMS and MIRE (Model Inventory Roadway Elements). 9/14/20 - Added the following fields - AADT, AADT_YR, HPMS_MAINTENANCE_OPERATIONS, HPMS_THROUGH_LANES, FUNCTIONAL_CLASS (replaces FUNCTION_CLASS)8/13/19 - The following counties were updated by using a variety of aerial photography: Eddy, Foster and Barnes. Seldom used trails have been added to Barnes, Benson, Billings, Bottineau, and Bowman Counties. Mercer County had (2) 61STAvenues, this has been corrected.12/26/18 - The following counties have had their roads updated by a variety of aerial photography, McHenry, Wells, Kidder, Cass (with aid of Cass county website) and McKenzie (with aid of McKenzie County GIS Coordinator)8/14/18 - Counties updated using 2017 NAIP Imagery are Ward, Mountrail, Burke and Renville counties. Seldom used trails are also being digitized into the dataset. They are being added as counties are being checked, so it will take some time for all seldom used trails to be added statewide. Also since the last update, all local roads that are in the corporate boundaries have been broken at the boundaries so it is easier to query to determine which roads go with each community.5/21/18 - removed CITY_INT_ID column - no longer used because of CITY_FIPS and HPMS_URBAN_CODE attributes. Removed SERVICE_LEVEL field, never used/maintained.4/19/18 - added HPMS_OWNERSHIP and HPMS_FACILITY fields for HPMS submittal1/24/18 - added CITY_FIPS and HPMS_URBAN_CODE attributes/domains. These columns will replace CITY_INT_ID and SOURCE_ID columns (eventually).11/15/17 - Williams, Divide and Bottineau counties have been updated. Great effort has been taken to update attributes and QC null fields. Functional Classified roads in Bismarck and Mandan have been updated as have local roads in Bismarck, Mandan, Williston, Fargo – West Fargo and Minot. 1/25/17 - started to maintain roads in Esri's Road and Highways. The shapes now contain measures in miles along with the associated linear referencing/roads and highways fields. Removed INSET_ASSOC field and added COUNTY_FIPS field.Updates include the counties of Emmons, Logan, McIntosh, Lamoure, Dickey, Ransom, Sargent and Richland. These counties were updated using a combination of the available NAIP aerials, the DES aerials, and by car within the insets. In addition to these updates, the whole county dataset was edited using Data Reviewer checks. The checks ran included unnecessary nodes, non-linear segments, invalid geometry, Duplicate vertices with a tolerance of .5 meters, polyline closes of self, checked for cutbacks using a 15 degree minimum angle, checked for polyline length check using a distance less than 10 meters, checked for multipart lines, inspected dangles with a tolerance of 10 meters, and checked for orphans. All checks were inspected and fixed where appropriate.7/16/14 - updates include: Traill, Barnes, Stutsman, Kidder, Bowman, Slope, Stark, Hettinger, Adams, Grant, Sioux and Morton. These datasets were updated using a combination of the available NAIP aerials, the DES aerials, and by car within the insets.10/22/12 - city streets were updated in Bismarck, Dickinson, Minot and Williston. GIS data from the city of Bismarck was used to update Bismarck, GIS data and 2012 aerial photography was used to update the city of Williston, Minot’s city map and the 2010 aerial photography from Ward County was used to update Minot, and 2011 aerial photography and Dickinson’s "working" city map was used to update Dickinson. The counties updated were Williams, Burke, Bottineau, Mountrail, Ward, Wells, Eddy, Foster, Griggs, Steele, and Cass. At the time of this updated, approximately 50% of Stutsman and 50% of Traill Counties are updated. Williams, Bottineau, Ward, and Mountrail roads were inspected from the air and the 2009 NAIP photos were also used to assist the updates. The roads in Williams County were also recoded to match Williams County naming conventions. Williams County CADD map which is on the Williams county web site was used in updating the road names. In Ward County, the 2010 image from Ward County was used to assist in updating Ward County. The 2010 NAIP photos were used to update Wells, Eddy, Foster, Griggs and Steele Counties. Cass was updated with the assistance of the Cass County GIS layer and the 2011 Cass county imagery. 10/3/2011 - County roads were edited in the cities of Fargo, West Fargo, Horace, Minot, Bismarck, Devils Lake, Grafton, Williston, Valley City, and Dickinson. Also, a part of Ward and Mchenry Counties was edited and the county of Renville has been updated. The business routes through Bismarck and Jamestown were also edited. 5/9/2011 - Updated streets in Bismarck, Mandan, Jamestown, Dickinson, West Fargo ( not quite finished yet), and Valley City. Also, corrected the north - south roads in Township 144N Ranges 49 - 53 E, (in Traill County) 10/5/10 - The original Roads_County data was maintained in two separate ArcInfo coverages and then combined each year and exported to the NDHUB infrastructure. These two coverages have now been combined into one SDE feature class and is being edited within the SDE environment. The following changes have been made to feature class. Deleted all the A1 and A2 Fields so a person would have to hunt back and forth to find a road name. Road names consist of the following fields: RTE_ID, STR_TYP, SUF_DIR, & LAN_DIR. The CMC route numbers were moved from the A1_ prefixed fields to the CMC field to better track the CMC route. Created a County Highway field so we can enter the county road number. It consists of the counties name and number. This is still a work in progress. Created FS_RD_Number and FS_RD_Name fields to better track Forest Service roads. Created Bia-RD_Number and BIA_RD_Name fields to better track Bureau of Indian Affairs roads. The following field changes are used for NDDOT specific processes: Created a service level field which is something that may be used in the future. Currently it contains how Walsh County prioritizes their roads. Created a Through and Connecting Route field so we can so select routes through the towns and cities. This was created exclusively for the county base maps. Created an Inset Associated field. This was created so the information in the rd_misc would come into the county routes. In the future, it is planned to be deleted. 6/18/09 - Updated county routes from aerial observation and photo interpretation using 2003, 2005, 2006 NAIP photos and 2008 photography from Designs camera. Counties updated were Golden Valley, Billings, McKenzie, Dunn, Mercer, Oliver, McLean, Sheridan and Burleigh. City streets were rectified in these counties using the 2003 NAIP photos. Observations were performed by Steven Nelson. 4/17/08 - Updated road surface types in NE. Rolette, Pierce, Benson, Towner, Ramsey, Cavalier, Pembina, Walsh, Grand Forks and Nelson from the 2006 aerial observations by Dewaine Olson 2/13/07 - Updated via 2004 NAIP photos: Barnes, Cass, Eddy, Foster, Griggs, Kidder, Steele, Stutsman, Traill, Wells. Combined Misc Roads and County Roads. Blank fields mean unknown attribute. Use P_STREET_NAME for dynamic labeling. We are also in the process of removing all proposed roads. 12/28/05 - Counties updated: Emmons, Logan, Mcintosh, Lamoure, Dickey, Ransom, Sargent, Richland, Divide, Williams, Burke, Mountrail, Ward, Renville, Bottineau, and Mchenry This data came from the NDDOT's Mapping Section. The original data was digitized from hand scribed maps and registered

The Statewide Parcel Project was funded by the 66th Legislative Assembly, appropriating funds through House Bill 1021. During the 2019-2021 Biennium, AppGeo aggregated parcel boundary and tax roll data from 51 counties and developed parcel boundary data for Adams and Benson counties.Beginning in the 2021-2023 Biennium the parcel dataset will be maintained on a regular basis using funding provided by the 67th Legislative Assembly and leveraging the existing North Dakota GIS Hub infrastructure. Data maintenance will consist of parcel boundary and tax roll data being submitted by counties and their vendors and/or harvested by the GIS Hub. The frequency of data updates will vary by county, ranging from monthly to yearly. To obtain the most recent data for a county, that county should be contacted.IMPORTANT: If you wish to download this entire dataset rather than stream the data as a web service, we suggest you use the 'Download Zipped fGDB' link. The other download options may take several minutes to generate.IMPORTANT: Please see the metadata for Limitations of UseOTHER NOTES:Rural parcels are the focus of the Statewide Parcel Program. In the future, city parcels may be filled in where currently missing.There is a one-to-many relationship between the parcels feature class and the tax roll table, based on the UniqueGISID attribute in each dataset.What appears to be missing parcel boundaries may be due to things such as:State and federal lands - refer to the GIS Hub Portal for these datasetsCities - some cities are included in the data submitted by the counties and their vendors, some are notInvalid geometry - issues with the data are flagged and stored in the 'Invalid Geometry' feature class