Age-adjustment mortality rates are rates of deaths that are computed using a statistical method to create a metric based on the true death rate so that it can be compared over time for a single population (i.e. comparing 2006-2008 to 2010-2012), as well as enable comparisons across different populations with possibly different age distributions in their populations (i.e. comparing Hispanic residents to Asian residents).
Age adjustment methods applied to Montgomery County rates are consistent with US Centers for Disease Control and Prevention (CDC), National Center for Health Statistics (NCHS) as well as Maryland Department of Health and Mental Hygiene’s Vital Statistics Administration (DHMH VSA). PHS Planning and Epidemiology receives an annual data file of Montgomery County resident deaths registered with Maryland Department of Health and Mental Hygiene’s Vital Statistics Administration (DHMH VSA).
Using SAS analytic software, MCDHHS standardizes, aggregates, and calculates age-adjusted rates for each of the leading causes of death category consistent with state and national methods and by subgroups based on age, gender, race, and ethnicity combinations. Data are released in compliance with Data Use Agreements between DHMH VSA and MCDHHS. This dataset will be updated Annually.

Number of deaths, crude mortality rates and age standardized mortality rates (based on 2011 population) for selected grouped causes, by sex. Data are available beginning from 2000.

The table displays weekly age standardized mortality rates for every province in Canada (excluding territories), by sex, since 2019. The standardization is done using the 2011 Canadian population.

Figure 7.1 provides the age-standardized mortality rates per 100,000 population, for the three selected causes of death and all causes combined. The three selected causes of death are Circulatory System, Neoplasms and External Causes (Injury). Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer - North, Calgary - West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published August 2022

This dataset of U.S. mortality trends since 1900 highlights trends in age-adjusted death rates for five selected major causes of death. Age-adjusted death rates (deaths per 100,000) after 1998 are calculated based on the 2000 U.S. standard population. Populations used for computing death rates for 2011–2017 are postcensal estimates based on the 2010 census, estimated as of July 1, 2010. Rates for census years are based on populations enumerated in the corresponding censuses. Rates for noncensus years between 2000 and 2010 are revised using updated intercensal population estimates and may differ from rates previously published. Data on age-adjusted death rates prior to 1999 are taken from historical data (see References below). Revisions to the International Classification of Diseases (ICD) over time may result in discontinuities in cause-of-death trends. SOURCES CDC/NCHS, National Vital Statistics System, historical data, 1900-1998 (see https://www.cdc.gov/nchs/nvss/mortality_historical_data.htm); CDC/NCHS, National Vital Statistics System, mortality data (see http://www.cdc.gov/nchs/deaths.htm); and CDC WONDER (see http://wonder.cdc.gov). REFERENCES National Center for Health Statistics, Data Warehouse. Comparability of cause-of-death between ICD revisions. 2008. Available from: http://www.cdc.gov/nchs/nvss/mortality/comparability_icd.htm. National Center for Health Statistics. Vital statistics data available. Mortality multiple cause files. Hyattsville, MD: National Center for Health Statistics. Available from: https://www.cdc.gov/nchs/data_access/vitalstatsonline.htm. Kochanek KD, Murphy SL, Xu JQ, Arias E. Deaths: Final data for 2017. National Vital Statistics Reports; vol 68 no 9. Hyattsville, MD: National Center for Health Statistics. 2019. Available from: https://www.cdc.gov/nchs/data/nvsr/nvsr68/nvsr68_09-508.pdf. Arias E, Xu JQ. United States life tables, 2017. National Vital Statistics Reports; vol 68 no 7. Hyattsville, MD: National Center for Health Statistics. 2019. Available from: https://www.cdc.gov/nchs/data/nvsr/nvsr68/nvsr68_07-508.pdf. National Center for Health Statistics. Historical Data, 1900-1998. 2009. Available from: https://www.cdc.gov/nchs/nvss/mortality_historical_data.htm.

This is historical data. The update frequency has been set to "Static Data" and is here for historic value. Updated 8/14/2024.

Rate of deaths per 100,000 population by selected underlying causes of death among Maryland residents (1992-2017).

Number of deaths, crude mortality rates and age standardized mortality rates (based on 2021 estimated population) for selected grouped causes, by sex, 2000 to most recent year.

Experimental analysis of ethnic differences in cause-specific mortality rates in England and Wales based on 2011 Census and death registrations.

This dataset presents information on age-standardized mortality rates by First Nations status.

Number of deaths, crude mortality rates and age standardized mortality rates (based on 2011 population) for selected grouped causes, by sex, 2000 to most recent year.

Crude, age-specific, and age-standardized COVID-19 mortality rates per 100,000 person-years for non-Hispanic White, non-Hispanic Black, Hispanic, non-Hispanic American Indian or Alaska Native, and non-Hispanic Asian or Pacific Islander populations, and age-specific mortality rate ratios and rate differences per 100,000 person-years.

Health indicators, age-standardized rate, annual estimates, by sex, Canada, provinces and territories.

Age-Standardized Mortality Rates by First Nations Status.

Age-standardized rate of cancer incidence for selected primary sites of cancer, by sex, for health regions, on a three-year average basis.

This is historical data. The update frequency has been set to "Static Data" and is here for historic value. Updated on 8/14/2024 Age-Adjusted Mortality Rate From Heart Disease - This indicator shows the age-adjusted mortality rate from heart disease (per 100,000 population). Heart disease is the leading cause of death in Maryland accounting for 25% of all deaths. Between 2012-2014, over 30,000 people died of heart disease in Maryland. Link to Data Details

This dataset presents information on age-standardized mortality rates by First Nations status.

This dataset presents information on age-standardized incidence rates of end stage renal disease (ESRD) for Alberta, Alberta and Health Services (AHS) continuum zones, expressed as per 100,000 population.

In 2020, the mortality rate for breast cancer was **** per 100,000 population among females in Canada. This statistic displays the age-standardized mortality rate of breast cancers among females in Canada between 1988 and 2020 with forecasts from 2021 to 2023.

This table provides the age-standardized mortality rates per 100,000 population, for the three selected causes of death and all causes combined for both the local geographic area and Alberta for the most recent three-year period available. The three selected causes of death are Circulatory System, Neoplasms and External Causes (Injury). Age standardization is a technique applied to make rates comparable across groups with different age distributions. A simple rate is defined as the number of people with a particular condition divided by the whole population. An age-standardized rate is defined as the number of people with a condition divided by the population within each age group. Standardizing (adjusting) the rate across age groups allows a more accurate comparison between populations that have different age structures. Age standardization is typically done when comparing rates across time periods, different geographic areas, and or population sub-groups (e.g. ethnic group). This indicator dataset contains information at both Local Geographic Area (for example, Lacombe, Red Deer - North, Calgary - West Bow, etc.) and Alberta levels. Local geographic area refers to 132 geographic areas created by Alberta Health (AH) and Alberta Health Services (AHS) based on census boundaries. This table is the part of "Alberta Health Primary Health Care - Community Profiles" report published February 2019

Do you know further standard populations?

If you know any further standard populations worth integrating in this dataset, please let me know in the discussion part. I would be happy to integrate further data to make this dataset more useful for everybody.

German "Federal Health Monitoring System" about 'standard populations':

"Standard populations are "artificial populations" with fictitious age structures, that are used in age standardization as uniform basis for the calculation of comparable measures for the respective reference population(s).

Use: Age standardizations based on a standard population are often used at cancer registries to compare morbidity or mortality rates. If there are different age structures in populations of different regions or in a population in one region over time, the comparability of their mortality or morbidity rates is only limited. For interregional or inter-temporal comparisons, therefore, an age standardization is necessary. For this purpose the age structure of a reference population, the so-called standard population, is assumed for the study population. The age specific mortality or morbidity rates of the study population are weighted according to the age structure of the standard population. Selection of a standard population:

Which standard population is used for comparison basically, does not matter. It is important, however, that

1. the demographic structure of the standard population is not too dissimilar to that of the reference population and
2. the comparable rates refer to the same standard."

Aim of this dataset

The aim of this dataset is to provide a variety of the most commonly used 'standard populations'.

Currently, two files with 22 standard populations are provided: - standard_populations_20_age_groups.csv - 20 age groups: '0', '01-04', '05-09', '10-14', '15-19', '20-24', '25-29', '30-34', '35-39', '40-44', '45-49', '50-54', '55-59', '60-64', '65-69', '70-74', '75-79', '80-84', '85-89', '90+' - 7 standard populations: 'Standard population Germany 2011', 'Standard population Germany 1987', 'Standard population of Europe 2013', 'Standard population Old Laender 1987', 'Standard population New Laender 1987', 'New standard population of Europe', 'World standard population' - source: German Federal Health Monitoring System

• standard_populations_19_age_groups.csv
  • 19 age groups: '0', '01-04', '05-09', '10-14', '15-19', '20-24', '25-29', '30-34', '35-39', '40-44', '45-49', '50-54', '55-59', '60-64', '65-69', '70-74', '75-79', '80-84', '85+'
  • 15 standard populations: '1940 U.S. Std Million', '1950 U.S. Std Million', '1960 U.S. Std Million', '1970 U.S. Std Million', '1980 U.S. Std Million', '1990 U.S. Std Million', '1991 Canadian Std Million', '1996 Canadian Std Million', '2000 U.S. Std Million', '2000 U.S. Std Population (Census P25-1130)', '2011 Canadian Standard Population', 'European (EU-27 plus EFTA 2011-2030) Std Million', 'European (Scandinavian 1960) Std Million', 'World (Segi 1960) Std Million', 'World (WHO 2000-2025) Std Million'
  • source: National Institutes of Health, National Cancer Institute, Surveillance, Epidemiology, and End Results Program

Terms of use

No restrictions are known to the author. Standard populations are published by different organisations for public usage.