Internal view of the parcel layer. This view contains all the attributes that can be seen by County employees.There are approximately 51,300 real property parcels in Napa County. Parcels delineate the approximate boundaries of property ownership as described in Napa County deeds, filed maps, and other source documents. GIS parcel boundaries are maintained by the Information Technology Services GIS team. Assessor Parcel Maps are created and maintained by the Assessor Division Mapping Section. Each parcel has an Assessor Parcel Number (APN) that is its unique identifier. The APN is the link to various Napa County databases containing information such as owner name, situs address, property value, land use, zoning, flood data, and other related information. Data for this map service is sourced from the Napa County Parcels dataset which is updated nightly with any recent changes made by the mapping team. There may at times be a delay between when a document is recorded and when the new parcel boundary configuration and corresponding information is available in the online GIS parcel viewer.From 1850 to early 1900s assessor staff wrote the name of the property owner and the property value on map pages. They began using larger maps, called “tank maps” because of the large steel cabinet they were kept in, organized by school district (before unification) on which names and values were written. In the 1920s, the assessor kept large books of maps by road district on which names were written. In the 1950s, most county assessors contracted with the State Board of Equalization for board staff to draw standardized 11x17 inch maps following the provisions of Assessor Handbook 215. Maps were originally drawn on linen. By the 1980’s Assessor maps were being drawn on mylar rather than linen. In the early 1990s Napa County transitioned from drawing on mylar to creating maps in AutoCAD. When GIS arrived in Napa County in the mid-1990s, the AutoCAD images were copied over into the GIS parcel layer. Sidwell, an independent consultant, was then contracted by the Assessor’s Office to convert these APN files into the current seamless ArcGIS parcel fabric for the entire County. Beginning with the 2024-2025 assessment roll, the maps are being drawn directly in the parcel fabric layer.Parcels in the GIS parcel fabric are drawn according to the legal description using coordinate geometry (COGO) drawing tools and various reference data such as Public Lands Survey section boundaries and road centerlines. The legal descriptions are not defined by the GIS parcel fabric. Any changes made in the GIS parcel fabric via official records, filed maps, and other source documents are uploaded overnight. There is always at least a 6-month delay between when a document is recorded and when the new parcel configuration and corresponding information is available in the online parcel viewer for search or download.Parcel boundary accuracy can vary significantly, with errors ranging from a few feet to several hundred feet. These distortions are caused by several factors such as: the map projection - the error derived when a spherical coordinate system model is projected into a planar coordinate system using the local projected coordinate system; and the ground to grid conversion - the distortion between ground survey measurements and the virtual grid measurements. The aim of the parcel fabric is to construct a visual interpretation that is adequate for basic geographic understanding. This digital data is intended for illustration and demonstration purposes only and is not considered a legal resource, nor legally authoritative.SFAP & CFAP DISCLAIMER: Per the California Code, RTC 606. some legal parcels may have been combined for assessment purposes (CFAP) or separated for assessment purposes (SFAP) into multiple parcels for a variety of tax assessment reasons. SFAP and CFAP parcels are assigned their own APN number and primarily result from a parcel being split by a tax rate area boundary, due to a recorded land use lease, or by request of the property owner. Assessor parcel (APN) maps reflect when parcels have been separated or combined for assessment purposes, and are one legal entity. The goal of the GIS parcel fabric data is to distinguish the SFAP and CFAP parcel configurations from the legal configurations, to convey the legal parcel configurations. This workflow is in progress. Please be advised that while we endeavor to restore SFAP and CFAP parcels back to their legal configurations in the primary parcel fabric layer, SFAP and CFAP parcels may be distributed throughout the dataset. Parcels that have been restored to their legal configurations, do not reflect the SFAP or CFAP parcel configurations that correspond to the current property tax delineations. We intend for parcel reports and parcel data to capture when a parcel has been separated or combined for assessment purposes, however in some cases, information may not be available in GIS for the SFAP/CFAP status of a parcel configuration shown. For help or questions regarding a parcel’s SFAP/CFAP status, or property survey data, please visit Napa County’s Surveying Services or Property Mapping Information. For more information you can visit our website: When a Parcel is Not a Parcel | Napa County, CA

Description: Parcels represent taxable pieces of property. A parcel is created by the San Diego County Assessor/Recorder/County Clerk (ARCC) to identify a specific portion of real property that is taxed at a certain rate for a certain owner. Tax parcels are typically the same as a legally subdivided lot but are not necessessarily so. For example, a single owner may own a legally subdivided piece of property but there may be two or more tax parcels covering that property. Legal subdivisions are shown in the LOTS layer.Parcels are keyed to the Assessor Parcel Number (APN) and the parcel polygon identifier (PARCELID).The SanGIS parcel layers are “stacked” parcels. That means that for any piece of ground there may be multiple parcels. For example, a condominium building in downtown San Diego may have 200 individual condos. Each condo is a separate taxable parcel. All 200 parcels will be associated with the same physical lot on the ground. When the SanGIS parcel layer is created each individual condo has a polygon representing the physical location of the parent parcel. In this example there will be 200 polygons all stacked on top of each other that represent the taxable parcels and each polygon will have the same physical characteristics (shape, size, area, location) – they are, essentially, copies of each other. However, other associated information (owner, document numbers, etc) will be different for each. In this case, each condo unit will have its own parcel number and there will be no single parcel representing the lot on the ground. Besides condominiums there are two other cases where you will see stacked parcels – possessory interest and mobile homes. Possessory interests have Assessor Parcel Numbers (APNs) that start with 76x. A possessory interest (or PI) parcel represents a taxable interest in the underlying, or parent, parcel but not necessarily ownership. For instance, a private company may have an arrangement with a University to operate a business on campus – a coffee shop or gift shop for example. The private business is taxable and is assigned a 76x APN and that APN is associated with the parent parcel which is owned by the University. Possessory interests do not represent ownership on the parcel, only a taxable interest in the underlying parent parcel.Mobile home parcel APNs start with 77x. In a manner similar to the possessory interests, mobile home owners own their home (coach) but not the underlying property on which the house sits. The actual mobile home is a separate taxable parcel associated with the mobile home park parent parcel. These taxable parcels all have the same polygon as the underlying parent parcel and will show as stacked parcels as well.This dataset contains parcels as shown on the Assessor Parcel Maps (APM). However, parcels shown in this layer may lag that of the official APM by a number of weeks due to how SanGIS is notified of the newly created parcel and the timing of publication of the parcel layer.This dataset contains the parcel polygon and associated parcel information provided by the County ARCC in thier Master Property Record (MPR file) and Parcel Assessment Record (PAR file). In addition to the MPR and PAR data assigned by ARCC, SanGIS may add situs address information if it has been provided by the addressing authority in which the parcel is situated. The situs address information provided by SanGIS may not be the same as the SITUS address data in the MPR.This dataset contains site address information along with owner names and addresses, and other property information. Key fields in this dataset include:Land use information provided in the NUCLEUS_USE_CD field (225 types with a 3-digit domain). The ASR_LANDUSE field is an older version of this field but comprises more generalized land uses (91 types). Generalized land use zoning information is provided in the NUCLEUS_ZONE_CD field. The ASR_ZONE field is an older version of this field. Land use zoning is generalized comprising 9 zone types. This can provide a useful approximation for parcels that are outside of the San Diego City and County zoning jurisdictions.Please note that land use and zoning fields are not regularly maintained by the Assessor's Office and should only be used as an approximate guide. Updates are only made when there is new construction, or a change in ownership. They are not updated when the County and Local Cities update their zoning data or when permit changes to properties are completed. Please refer to city and County official zoning datasets for official zoning information, and to SANDAG for more current land use data.

​

Copyright Text: SanGIS using legal recorded data provided by the County Recorders and Assessor's Office. See the County ARCC website at https://arcc.sdcounty.ca.gov/Pages/default.aspx for more information about tax parcels

Historically, the earliest Bakersfield “urban” subdivisions were not called tracts. The downtown area was subdivided into blocks and lots. Early citywide maps show the city blocks numbered from 1 to over 700. Some blocks were designated by letters rather than numbers. Each block was further subdivided into numbered lots. Thereafter housing subdivisions were called tracts and initially were named (example; Lowell Addition). Many of these “Named” tracts were also subdivided into blocks and lots. The earliest rural land subdivisions are the Sales Map Lands of J. B. Haggin and the Sales Map Lands of the Kern County l Land Company. The legal description of most modern lots is comprised of some combination of the fields: Document Type, Map Number, Phase and Lot Number. A “Block” field should be added for old parcels whose legal description is comprised of tract, block and lot (or just block and lot). The legal description fields for most of the older parcels are not populated at this time. PARCEL FEATURE CLASS ATTRIBUTES Document Type (Domain)Aliquot – subdivision of a public land survey system section i.e. the northeast quarter of the south east quarter of the southwest quarter of section 10 of T28S, R27ETract MapParcel Map Lot Line Adjustment (ex. LLA17-0684)Parcel Map Waiver (ex. PMW17-0398)Parcel Merger (ex. LM17-0695)Map Number Tracts – Old named tracts and numbered tracts, currently into the 7000’sParcel maps – numbered, currently into the 12,000’sMinor land subdivisions (lot line adjustments, parcel map waivers, parcel mergers) format YY-NNNN, where YY is a 2-digit designation of the year and NNNN is a zero-filled number (county files is reversed, ex. NN – YY)Phase Applicable to tract and parcel maps only; i.e. 1, 2, 3 etc. or A, B, C etc. Lot Number i.e. 1, 2, 3 etc. or A, B, C etc. Quality (Domain)In reference to the geometric and positional accuracy of the parcel features. All COGO’d parcels are considered “Excellent” quality User Flag This field is for temporary data storage. However the following user flag values provide information about how the parcel features originally built or subsequently edited: CAD CONVERSION - parcels were developed from georeferenced CAD data. Quality is considered excellent. COGO - parcels were first developed employing COGO editing tools. Quality is considered excellent REBUILT - parcels were originally Valleywide GIS features that were rebuilt using COGO and other editing tools. Quality is considered excellent except parcels that were rebuilt where only assessor maps were available. SHIFTED - original parcels were considered geometrically adequate but required a slight positional shift. Whole blocks of contiguous lots were shifted together. Quality is considered good. Class(Domain)This field provides an opportunity to classify lots for specific purposes. The Private road lot class was created so these lots could be neglected when exporting parcels for the Community Maps Project. Landscape lot Private road lot School lot Sump lot Water Well lot Additional classes could be developed. For the vast majority of parcels the class field is not populated. Address The street address of a lot can be populated if the address point feature class objects have already been created and populated by the GIS Analyst at Community Development. Where there are multiple addresses on a parcel, this data is captured on the Address Point feature class. Assessor Parcel Number (APN) and Assessor Tax Numbers (ATN)The most important parcel layer attributes are the APN and ATN values that are assigned by the Kern County Assessor. An 8 digit APN is assigned to a property that has a specific geometry as defined by a legal description. If any new change occurs such as a lot line adjustment, then the geometry of the parcel(s) are changed and the APN’s for the affected properties are dropped and are never re-assigned. New unique APN’s are assigned to the affected properties and remain as long as the legal description of the geometry does not change. It usually takes at least a few months after a tract is recorded and the parcel feature class objects are developed before the County assigns APN’s to those parcels. The APN field is populated with “NEW” until such time as values are assigned. Parcel APNs can be acquired from the following sources: https://kernpublicworks.com/maps/parcel-maps/, Preliminary (January) and final (July) Kern County parcel GIS releases. Some Condominium common areas do not have an APN. The APN field is populated with “CONDOLOT”. These parcels are retained in order to preserve road right of ways. Compare City parcel layer features with County features to visualize why we retain these parcels.

This is the official Mariposa County Assessor's Parcel Map GIS layer. This GIS data provides the parcel geometry, APN (Assessor's Parcel Number, e.g. 013-116-007-000) and Physical Addresses for all legal properties in Mariposa County. Data is delivered as-is and under no circumstances shall Mariposa County be held liable from any determinations made based on said data.This GIS data is automatically updated on a daily basis and 1 business day behind the most recent Assessor's Office data export. For example, if the data is listed as updated on Jan 1, then the data is from Dec 31.This layer consists of 2 layers actually. The first layer is the geometry with minimal attribute data. The second layer is a table with address data for each parcel. Using a GIS program like ArcGIS Pro a join can be established using the APN and the common

The seamless, county-wide parcel layer was digitized from official Assessor Parcel (AP) Maps which were originally maintained on mylar sheets and/or maintained as individual Computer Aided Design (CAD) drawing files (e.g., DWG). The CRA office continues to maintain the official AP Maps in CAD drawings and Information Systems Department/Geographic Information Systems (ISD/GIS) staff apply updates from these maps to the seamless parcel base in the County’s Enterprise GIS. The seamless parcel layer is updated and published to the Internet on a monthly basis.The seamless parcel layer was developed from the source data using the general methodology outlined below. The mylar sheets were scanned and saved to standard image file format (e.g., TIFF). The individual scanned maps or CAD drawing files were imported into GIS software and geo-referenced to their corresponding real-world locations using high resolution orthophotography as control. The standard approach was to rescale and rotate the scanned drawing (or CAD file) to match the general location on the orthophotograph. Then, appropriate control points were selected to register and rectify features on the scanned map (or CAD drawing file) to the orthophotography. In the process, features in the scanned map (or CAD drawing file) were transformed to real-world coordinates, and line features were created using “heads-up digitizing” and stored in new GIS feature classes. Recommended industry best practices were followed to minimize root mean square (RMS) error in the transformation of the data, and to ensure the integrity of the overall pattern of each AP map relative to neighboring pages. Where available Coordinate Geometry (COGO) & survey data, tied to global positioning systems (GPS) coordinates, were also referenced and input to improve the fit and absolute location of each page. The vector lines were then assembled into a polygon features, with each polygon being assigned a unique identifier, the Assessor Parcel Number (APN). The APN field in the parcel table was joined to the corresponding APN field in the assessor property characteristics table extracted from the MPTS database to create the final parcel layer. The result is a seamless parcel land base, each parcel polygon coded with a unique APN, assembled from approximately 6,000 individual map page of varying scale and accuracy, but ensuring the correct topology of each feature within the whole (i.e., no gaps or overlaps). The accuracy and quality of the parcels varies depending on the source. See the fields RANK and DESCRIPTION fields below for information on the fit assessment for each source page. These data should be used only for general reference and planning purposes. It is important to note that while these data were generated from authoritative public records, and checked for quality assurance, they do not provide survey-quality spatial accuracy and should NOT be used to interpret the true location of individual property boundary lines. Please contact the Sonoma County CRA and/or a licensed land surveyor before making a business decision that involves official boundary descriptions.

Do not download this parcel map service as a shapefile - you will get an error. To download a zipped file geodatabase, go to this Hub item: https://egis-lacounty.hub.arcgis.com/datasets/parcelsThis map service provides information about properties and parcel boundaries in the County of Los Angeles. The Office of the Assessor (click here for their website) maintains assessment records of real and personal property in the County of Los Angeles, as well as a GIS Tax Parcel Base Map. The Assessor has recently changed its policies and will be releasing a number of datasets publicly over time. They will be available here, as well as on the County’s Open Data Portal (click here to learn more). To access the Property Assessment Information System, where you can search for properties and see maps and imagery, go to the PAIS website.All inquiries should be directed to the Mapping & GIS Services Section, LA County Office of the Assessor at gisinfo@assessor.lacounty.gov

Parcels delineate the approximate boundaries of property ownership as described in Napa County deeds, filed maps, and other source documents. Parcel boundaries in GIS are created and maintained by the Assessor’s Division Mapping section and Information Technology Services. There are approximately 51,300 real property parcels in Napa County. Parcels delineate the approximate boundaries of property ownership as described in Napa County deeds, filed maps, and other source documents. GIS parcel boundaries are maintained by the Information Technology Services GIS team. Assessor Parcel Maps are created and maintained by the Assessor Division Mapping Section. Each parcel has an Assessor Parcel Number (APN) that is its unique identifier. The APN is the link to various Napa County databases containing information such as owner name, situs address, property value, land use, zoning, flood data, and other related information. Data for this map service is sourced from the Napa County Parcels dataset which is updated nightly with any recent changes made by the mapping team. There may at times be a delay between when a document is recorded and when the new parcel boundary configuration and corresponding information is available in the online GIS parcel viewer.From 1850 to early 1900s assessor staff wrote the name of the property owner and the property value on map pages. They began using larger maps, called “tank maps” because of the large steel cabinet they were kept in, organized by school district (before unification) on which names and values were written. In the 1920s, the assessor kept large books of maps by road district on which names were written. In the 1950s, most county assessors contracted with the State Board of Equalization for board staff to draw standardized 11x17 inch maps following the provisions of Assessor Handbook 215. Maps were originally drawn on linen. By the 1980’s Assessor maps were being drawn on mylar rather than linen. In the early 1990s Napa County transitioned from drawing on mylar to creating maps in AutoCAD. When GIS arrived in Napa County in the mid-1990s, the AutoCAD images were copied over into the GIS parcel layer. Sidwell, an independent consultant, was then contracted by the Assessor’s Office to convert these APN files into the current seamless ArcGIS parcel fabric for the entire County. Beginning with the 2024-2025 assessment roll, the maps are being drawn directly in the parcel fabric layer.Parcels in the GIS parcel fabric are drawn according to the legal description using coordinate geometry (COGO) drawing tools and various reference data such as Public Lands Survey section boundaries and road centerlines. The legal descriptions are not defined by the GIS parcel fabric. Any changes made in the GIS parcel fabric via official records, filed maps, and other source documents are uploaded overnight. There is always at least a 6-month delay between when a document is recorded and when the new parcel configuration and corresponding information is available in the online parcel viewer for search or download.Parcel boundary accuracy can vary significantly, with errors ranging from a few feet to several hundred feet. These distortions are caused by several factors such as: the map projection - the error derived when a spherical coordinate system model is projected into a planar coordinate system using the local projected coordinate system; and the ground to grid conversion - the distortion between ground survey measurements and the virtual grid measurements. The aim of the parcel fabric is to construct a visual interpretation that is adequate for basic geographic understanding. This digital data is intended for illustration and demonstration purposes only and is not considered a legal resource, nor legally authoritative.SFAP & CFAP DISCLAIMER: Per the California Code, RTC 606. some legal parcels may have been combined for assessment purposes (CFAP) or separated for assessment purposes (SFAP) into multiple parcels for a variety of tax assessment reasons. SFAP and CFAP parcels are assigned their own APN number and primarily result from a parcel being split by a tax rate area boundary, due to a recorded land use lease, or by request of the property owner. Assessor parcel (APN) maps reflect when parcels have been separated or combined for assessment purposes, and are one legal entity. The goal of the GIS parcel fabric data is to distinguish the SFAP and CFAP parcel configurations from the legal configurations, to convey the legal parcel configurations. This workflow is in progress. Please be advised that while we endeavor to restore SFAP and CFAP parcels back to their legal configurations in the primary parcel fabric layer, SFAP and CFAP parcels may be distributed throughout the dataset. Parcels that have been restored to their legal configurations, do not reflect the SFAP or CFAP parcel configurations that correspond to the current property tax delineations. We intend for parcel reports and parcel data to capture when a parcel has been separated or combined for assessment purposes, however in some cases, information may not be available in GIS for the SFAP/CFAP status of a parcel configuration shown. For help or questions regarding a parcel’s SFAP/CFAP status, or property survey data, please visit Napa County’s Surveying Services or Property Mapping Information. For more information you can visit our website: When a Parcel is Not a Parcel | Napa County, CA

Data last synced 07-11-2025 00:48. Data synced on a Daily interval.

The seamless, county-wide parcel layer was digitized from official Assessor Parcel (AP) Maps which were originally maintained on mylar sheets and/or maintained as individual Computer Aided Design (CAD) drawing files (e.g., DWG). The CRA office continues to maintain the official AP Maps in CAD drawings and Information Systems Department/Geographic Information Systems (ISD/GIS) staff apply updates from these maps to the seamless parcel base in the County’s Enterprise GIS. This layer is a partial view of the Information Sales System (ISS) extract, a report of property characteristics taken from the County’s Megabyte Property Tax System (MPTS). This layer may be missing some attributes (e.g., Owner Name) which may not be published to the Internet due to privacy conditions under the California Public Records Act (CPRA). Please contact the Clerk-Recorder-Assessor (CRA) office at (707) 565-1888 for information on availability, associated fees, and access to other versions of Sonoma County parcels containing additional property characteristics.The seamless parcel layer is updated and published to the Internet on a monthly basis.The seamless parcel layer was developed from the source data using the general methodology outlined below. The mylar sheets were scanned and saved to standard image file format (e.g., TIFF). The individual scanned maps or CAD drawing files were imported into GIS software and geo-referenced to their corresponding real-world locations using high resolution orthophotography as control. The standard approach was to rescale and rotate the scanned drawing (or CAD file) to match the general location on the orthophotograph. Then, appropriate control points were selected to register and rectify features on the scanned map (or CAD drawing file) to the orthophotography. In the process, features in the scanned map (or CAD drawing file) were transformed to real-world coordinates, and line features were created using “heads-up digitizing” and stored in new GIS feature classes. Recommended industry best practices were followed to minimize root mean square (RMS) error in the transformation of the data, and to ensure the integrity of the overall pattern of each AP map relative to neighboring pages. Where available Coordinate Geometry (COGO) & survey data, tied to global positioning systems (GPS) coordinates, were also referenced and input to improve the fit and absolute location of each page. The vector lines were then assembled into a polygon features, with each polygon being assigned a unique identifier, the Assessor Parcel Number (APN). The APN field in the parcel table was joined to the corresponding APN field in the assessor property characteristics table extracted from the MPTS database to create the final parcel layer. The result is a seamless parcel land base, each parcel polygon coded with a unique APN, assembled from approximately 6,000 individual map page of varying scale and accuracy, but ensuring the correct topology of each feature within the whole (i.e., no gaps or overlaps). The accuracy and quality of the parcels varies depending on the source. See the fields RANK and DESCRIPTION fields below for information on the fit assessment for each source page. These data should be used only for general reference and planning purposes. It is important to note that while these data were generated from authoritative public records, and checked for quality assurance, they do not provide survey-quality spatial accuracy and should NOT be used to interpret the true location of individual property boundary lines. Please contact the Sonoma County CRA and/or a licensed land surveyor before making a business decision that involves official boundary descriptions.

Placer County Assessor Office maintains parcels for Placer County. The parcel data should not be considered survey accurate, but efforts are continually made to make the data as spatially accurate as possible. The data contains numerous fields, including, but not limites Assessor Parcel Number (APN), assess land and structure value, situs address, owner address. NOTE: Placer County does not distribute owner names assoctaed with parcekl via the web. This layer is part of a collection of public geospatial datasets produced by the Placer County GIS Division.

These parcel boundaries represent legal descriptions of property ownership, as recorded in various public documents in the local jurisdiction. The boundaries are intended for cartographic use and spatial analysis only, and not for use as legal descriptions or property surveys. Tax parcel boundaries have not been edge-matched across municipal boundaries.

DATA DICTIONARY:Field NameDescriptionData FormatZip CodeSite Address Zip Code99999-9999City Tax Rate AreaCity Tax Rate AreaText AINAssessor Identification Number9999999999Roll YearRoll YearYYYYTax Rate Area CodeTax Rate Area99999Assessor IDAssessor Identification Number Formatted9999-999-999Property LocationAddress, City, State, ZipText Property Use TypeProperty Use TypeXXXProperty Use CodeProperty Use Code9999Use Code 1st Digit Use Code, First Digit DescriptionText Use Code 2nd Digit Use Code, Second Digit DescriptionText Use Code 3rd Digit Use Code, Third Digit DescriptionText Use Code 4th Digit Use Code, Fourth Digit DescriptionText Number of BuildingsBuilding Data Line9Year BuiltYear property was builtYYYYEffective YearEffective Year BuiltYYYYSquare FootageMain Square Footage999,999Number of BedroomsNumber of Bedrooms999Number of BathroomsNumber of Bathrooms999Number of UnitsNumber of Units 999Recording DateRecording DateYYYYMMDDLand ValueRoll Land Value999,999,999Land Base YearRoll Land Base YearYYYYImprovement ValueRoll Improvement Value999,999,999Improvement Base YearRoll Improvement Base YearYYYYTotal Value, Land + ImprovementRoll Total Value, Land + Improvement999,999,999Home Owners ExemptionRoll Home Owners Exemption9,999Real Estate ExemptionRoll Real Estate Exemption999,999,999Fixture ValueRoll Fixture Value999,999,999Fixture ExemptionRoll Fixture Exemption999,999,999Personal Property ValueRoll Personal Property Value999,999,999Personal Property ExemptionRoll Personal Property Exemption999,999,999Property taxable?Is property taxable?XTotal ValueRoll Total Value999,999,999Total ExemptionRoll Total Exemption999,999,999Taxable ValueNet Taxable Value999,999,999ClassificationParcel ClassificationText Region NumberAdministrative Region Number99Cluster CodeProperty Cluster Code99999Parcel Legal DescriptionParcel Boundary DescriptionText Address House NumberSitus Address, House Number99999Address House Number FractionSitus Address, House Number Fraction9/9DirectionSitus DirectionXStreetSitus StreetText Unit NumberSitus Unit Number999CitySitus CityText Zip CodeSitus Zip Code99999Row IDRow ID (Year + AIN)YYYY9999999999Location LatitudeProperty Latitude999.99999999Location LongitudeProperty Longitude999.99999999

description: Parcels and Land Ownership dataset current as of 2000. COGO and parcel map digitizing, primary attribute is APN.; abstract: Parcels and Land Ownership dataset current as of 2000. COGO and parcel map digitizing, primary attribute is APN.

MassGIS' standardized ("Level 3") property tax parcel mapping data set was developed through a competitive procurement funded by MassGIS. Each community in the Commonwealth was bid on by one or more vendors and the unit of work awarded was a city or town. The specification for this work was Level 3 of the MassGIS Digital Parcel Standard. Standardization of assessor parcel mapping is complete for all 351 Massachusetts' cities and towns. MassGIS is now incorporating updates from municipalities into the database. This hosted feature layer is exported from MassGIS' internal database of the feature class GISDATA.L3_TAXPAR_POLY_ASSESS, which links L3_TAXPAR_POLY and L3_ASSESS. The export includes the expression: (POLY_TYPE IN ('FEE', 'TAX')) OR (POLY_TYPE IN ('ROW', 'PRIV_ROW', 'RAIL_ROW', 'WATER') AND PROP_ID IS NOT NULL) It contains several fields from GISDATA.L3_ASSESS and stacked polygons where multiple assessor records link to a parcel. It contains features that do not have an associated record in GISDATA.L3_ASSESS, except for rights of way and water bodies. ROWs and water bodies with a non-null PROP_ID are included. The data in this feature layer is used for the popups in the Massachusetts Interactive Property Map. See full data descriptionA hosted tile layer will draw very quickly at map scale of 1:18,056 (level 15) to 1:564 (level 20).

Parcels represent taxable pieces of property. A parcel is created by the San Diego County Assessor/Recorder/County Clerk (ARCC) to identify a specific portion of real property that is taxed at a certain rate for a certain owner. Tax parcels are typically the same as a legally subdivided lot but are not necessessarily so. For example, a single owner may own a legally subdivided piece of property but there may be two or more tax parcels covering that property. Legal subdivisions are shown in the LOTS layer.Parcels are keyed to the Assessor Parcel Number (APN) and the parcel polygon identifier (PARCELID).The SanGIS parcel layers are “stacked” parcels. That means that for any piece of ground there may be multiple parcels. For example, a condominium building in downtown San Diego may have 200 individual condos. Each condo is a separate taxable parcel. All 200 parcels will be associated with the same physical lot on the ground. When the SanGIS parcel layer is created each individual condo has a polygon representing the physical location of the parent parcel. In this example there will be 200 polygons all stacked on top of each other that represent the taxable parcels and each polygon will have the same physical characteristics (shape, size, area, location) – they are, essentially, copies of each other. However, other associated information (owner, document numbers, etc) will be different for each. In this case, each condo unit will have its own parcel number and there will be no single parcel representing the lot on the ground. Besides condominiums there are two other cases where you will see stacked parcels – possessory interest and mobile homes. Possessory interests have Assessor Parcel Numbers (APNs) that start with 76x. A possessory interest (or PI) parcel represents a taxable interest in the underlying, or parent, parcel but not necessarily ownership. For instance, a private company may have an arrangement with a University to operate a business on campus – a coffee shop or gift shop for example. The private business is taxable and is assinged a 76x APN and that APN is associated with the parent parcel which is owned by the University. Possessory intestests do not represent ownership on the parcel, only a taxable interest in the underlying parent parcel.Mobile home parcel APNs start with 77x. In a manner similar to the possessory interests, mobile home owners own their home (coach) but not the underlying property on which the house sits. The actual mobile home is a separate taxable parcel associated with the mobile home park parent parcel. These taxable parcels all have the same polygon as the underlying parent parcel and will show as stacked parcels as well.This dataset contains parcels as shown on the Assessor Parcel Maps (APM). However, parcels shown in this layer may lag that of the official APM by a number of weeks due to how SanGIS is notified of the newly created parcel and the timing of publication of the parcel layer.This dataset contains the parcel polygon and associated parcel information provided by the County ARCC in thier Master Property Record (MPR file) and Parcel Assessment Record (PAR file). In addition to the MPR and PAR data assigned by ARCC, SanGIS may add situs address information if it has been provided by the addressing authority in which the parcel is situated. The situs address information provided by SanGIS may not be the same as the SITUS address data in the MPR.This dataset contains site address information along with owner names and addresses, and other property information. Key fields in this dataset include:Land use information provided in the NUCLEUS_USE_CD field (225 types with a 3-digit domain). The ASR_LANDUSE field is an older version of this field but comprises more generalized land uses (91 types). Generalized land use zoning information is provided in the NUCLEUS_ZONE_CD field. The ASR_ZONE field is an older version of this field. Land use zoning is generalized comprising 9 zone types. This can provide a useful approximation for parcels that are outside of the San Diego City and County zoning jurisdictions.Please note that land use and zoning fields are not regularly maintained by the Assessor's Office and should only be used as an approximate guide. Updates are only made when there is new construction, or a change in ownership. They are not updated when the County and Local Cities update their zoning data or when permit changes to properties are completed. Please refer to city and County official zoning datasets for official zoning information, and to SANDAG for more current land use data. NOTE: If the name of this layer includes "_NORTH", "_SOUTH", or "_EAST" it represents a subset of the entire San Diego County Parcel Base. That is, the "_NORTH" layer includes only parcels generally in the Northwestern portion of the County. The "_SOUTH" layer includes parcels in the Southwestern portion. And the "_EAST" layer includes parcels in the approximate Eastern half of the County.

To access parcel information:Enter an address or zoom in by using the +/- tools or your mouse scroll wheel. Parcels will draw when zoomed in.Click on a parcel to display a popup with information about that parcel.Click the "Basemap" button to display background aerial imagery.From the "Layers" button you can turn map features on and off.Complete Help (PDF)Parcel Legend:Full Map LegendAbout this ViewerThis viewer displays land property boundaries from assessor parcel maps across Massachusetts. Each parcel is linked to selected descriptive information from assessor databases. Data for all 351 cities and towns are the standardized "Level 3" tax parcels served by MassGIS. More details ...Read about and download parcel dataUpdatesV 1.1: Added 'Layers' tab. (2018)V 1.2: Reformatted popup to use HTML table for columns and made address larger. (Jan 2019)V 1.3: Added 'Download Parcel Data by City/Town' option to list of layers. This box is checked off by default but when activated a user can identify anywhere and download data for that entire city/town, except Boston. (March 14, 2019)V 1.4: Data for Boston is included in the "Level 3" standardized parcels layer. (August 10, 2020)V 1.4 MassGIS, EOTSS 2021

This coverage can be used for basic applications such as viewing, querying, and map output production, or to provide a basemap to support graphical overlays and analyses of geospatial data.

The parcel data table is created to show current assessor information as provided monthly by the County Assessor. The join and creation of a separate parcel layer is required because Accela is not capable of handling joins in the rest services it utilizes. Therefor it is mandatory that the parcel data have all the necessary tabular data required by Accela processes and workflows. Parcel creation was overseen by Wallace Group who managed Applied Geographics who utilized Genesys International for actual parcel creation. Applied Geographics received the 2005 orthophotography and scanned map sheets in TIFF format. A current shape file parcel layer was also utilized for reference. Surveyed ROW boundary network was produced by Wallace Group. Individual scanned APN sheets were registered as a best-fit to the orthophotos and the surveyed ROW boundary network. The parcels were vector automated in AutoCAD using heads-up digitizing to accurately capture the parcel boundaries from the registered APN map scans. Straight lines were maintained as straight line and true curves were mapped as curves. Each parcel was coded with Map, Block, Lot, and APN as four different attributes. San Luis Obispo County notifies interested parties of monthly updates such as splits. Assessor maps with updates are compared to the existing City parcel layer and changes within the layer limits are incorporated by the City GIS Analyst. Updated monthly as needed.

This parcels polygons feature class represents current city parcels within the City of Los Angeles. It shares topology with the Landbase parcel lines feature class. The Mapping and Land Records Division of the Bureau of Engineering, Department of Public Works provides the most current geographic information of the public right of way, ownership and land record information. The legal boundaries are determined on the ground by license surveyors in the State of California, and by recorded documents from the Los Angeles County Recorder's office and the City Clerk's office of the City of Los Angeles. Parcel and ownership information are available on NavigateLA, a website hosted by the Bureau of Engineering, Department of Public Works.Associated information about the landbase parcels is entered into attributes. Principal attributes include:PIN and PIND: represents the unique auto-generated parcel identifier and key to related features and tables. This field is related to the LA_LEGAL, LA_APN and LA_HSE_NBR tables. PIN contains spaces and PIND replaces those spaces with a dash (-).LA_LEGAL - Table attributes containing legal description. Principal attributes include the following:TRACT: The subdivision tract number as recorded by the County of Los AngelesMAP_REF: Identifies the subdivision map book reference as recorded by the County of Los Angeles.LOT: The subdivision lot number as recorded by the County of Los Angeles.ENG_DIST: The four engineering Districts (W=Westla, C=Central, V= Valley and H=Harbor).CNCL_DIST: Council Districts 1-15 of the City of Los Angeles. OUTLA means parcel is outside the City.LA_APN- Table attributes containing County of Los Angeles Assessors information. Principal attributes include the following:BPP: The Book, Page and Parcel from the Los Angeles County Assessors office. SITUS*: Address for the property.LA_HSE_NBR - Table attributes containing housenumber information. Principal attributes include the following:HSE_ID: Unique id of each housenumber record.HSE_NBR: housenumber numerical valueSTR_*: Official housenumber addressFor a complete list of attribute values, please refer to Landbase_parcel_polygons_data_dictionary.Landbase parcels polygons data layer was created in geographical information systems (GIS) software to display the location of the right of way. The parcels polygons layer delineates the right of way from Landbase parcels lots. The parcels polygons layer is a feature class in the LACityLandbaseData.gdb Geodatabase dataset. The layer consists of spatial data as a polygon feature class and attribute data for the features. The area inside a polygon feature is a parcel lot. The area outside of the parcel polygon feature is the right of way. Several polygon features are adjacent, sharing one line between two polygons. For each parcel, there is a unique identifier in the PIND and PIN fields. The only difference is PIND has a dash and PIN does not. The types of edits include new subdivisions and lot cuts. Associated legal information about the landbase parcels lots is entered into attributes. The landbase parcels layer is vital to other City of LA Departments, by supporting property and land record operations and identifying legal information for City of Los Angeles. The landbase parcels polygons are inherited from a database originally created by the City's Survey and Mapping Division. Parcel information should only be added to the Landbase Parcels layer if documentation exists, such as a Deed or a Plan approved by the City Council. When seeking the definitive description of real property, consult the recorded Deed or Plan.List of Fields:ID: A unique numeric identifier of the polygon. The ID value is the last part of the PIN field value.ASSETID: User-defined feature autonumber.MAPSHEET: The alpha-numeric mapsheet number, which refers to a valid B-map or A-map number on the Cadastral grid index map. Values: • B, A, -5A - Any of these alpha-numeric combinations are used, whereas the underlined spaces are the numbers. An A-map is the smallest grid in the index map and is used when there is a large amount of spatial information in the map display. There are more parcel lines and annotation than can fit in the B-map, and thus, an A-map is used. There are 4 A-maps in a B-map. In areas where parcel lines and annotation can fit comfortably in an index map, a B-map is used. The B-maps are at a scale of 100 feet, and A-maps are at a scale of 50 feet.OBJECTID: Internal feature number.BPPMAP_REFTRACTBLOCKMODLOTARBCNCL_DIST: LA City Council District. Values: • (numbers 1-15) - Current City Council Member for that District can be found on the mapping website http://navigatela.lacity.org/navigatela, click Council Districts layer name, under Boundaries layer group.SHAPE: Feature geometry.BOOKPAGEPARCELPIND: The value is a combination of MAPSHEET and ID fields, creating a unique value for each parcel. The D in the field name PIND, means "dash", and there is a dash between the MAPSHEET and ID field values. This is a key attribute of the LANDBASE data layer. This field is related to the APN and HSE_NBR tables.ENG_DIST: LA City Engineering District. The boundaries are displayed in the Engineering Districts index map. Values: • H - Harbor Engineering District. • C - Central Engineering District. • V - Valley Engineering District. • W - West LA Engineering District.PIN: The value is a combination of MAPSHEET and ID fields, creating a unique value for each parcel. There are spaces between the MAPSHEET and ID field values. This is a key attribute of the LANDBASE data layer. This field is related to the APN and HSE_NBR tables.

File Geodatabase - Click hereShapefile - Click hereThis dataset contains current parcel boundaries and related attributes for approximately 2.4 million parcels maintained by the Los Angeles County Assessor (updated monthly on the second of every month). Due to the size of the data, it is only available for download as a zipped file geodatabase or shapefile at this time. For additional annual assessment roll history and attribute metadata descriptions, please visit the L.A. County Open Data Portal and search for Assessor. To better understand individual data elements, or to interactively view individual parcel information, please visit the Assessor’s Portal. A public-facing parcel map cache can be accessed here (updated weekly): https://public.gis.lacounty.gov/public/rest/services/LACounty_Cache/LACounty_Parcel/MapServer/0All inquiries should be directed to the Mapping & GIS Services Section, LA County Office of the Assessor at gisinfo@assessor.lacounty.gov