The California Department of Forestry and Fire Protection's Fire and Resource Assessment Program (FRAP) annually maintains and distributes an historical wildland fire perimeter dataset from across public and private lands in California. The GIS data is developed with the cooperation of the United States Forest Service Region 5, the Bureau of Land Management, California State Parks, National Park Service and the United States Fish and Wildlife Service and is released in the spring with added data from the previous calendar year. Although the dataset represents the most complete digital record of fire perimeters in California, it is still incomplete, and users should be cautious when drawing conclusions based on the data.

This data should be used carefully for statistical analysis and reporting due to missing perimeters (see Use Limitation in metadata). Some fires are missing because historical records were lost or damaged, were too small for the minimum cutoffs, had inadequate documentation or have not yet been incorporated into the database. Other errors with the fire perimeter database include duplicate fires and over-generalization. Additionally, over-generalization, particularly with large old fires, may show unburned "islands" within the final perimeter as burned. Users of the fire perimeter database must exercise caution in application of the data. Careful use of the fire perimeter database will prevent users from drawing inaccurate or erroneous conclusions from the data. This data is updated annually in the spring with fire perimeters from the previous fire season. This dataset may differ in California compared to that available from the National Interagency Fire Center (NIFC) due to different requirements between the two datasets. The data covers fires back to 1878. As of May 2025, it represents fire24_1.

Please help improve this dataset by filling out this survey with feedback:

Historic Fire Perimeter Dataset Feedback (arcgis.com)

Current criteria for data collection are as follows:

CAL FIRE (including contract counties) submit perimeters ≥10 acres in timber, ≥50 acres in brush, or ≥300 acres in grass, and/or ≥3 impacted residential or commercial structures, and/or caused ≥1 fatality.

All cooperating agencies submit perimeters ≥10 acres.

Version update:

Firep24_1 was released in April 2025. Five hundred forty-eight fires from the 2024 fire season were added to the database (2 from BIA, 56 from BLM, 197 from CAL FIRE, 193 from Contract Counties, 27 from LRA, 8 from NPS, 55 from USFS and 8 from USFW). Six perimeters were added from the 2025 fire season (as a special case due to an unusual January fire siege). Five duplicate fires were removed, and the 2023 Sage was replaced with a more accurate perimeter. There were 900 perimeters that received updated attribution (705 removed “FIRE” from the end of Fire Name field and 148 replaced Complex IRWIN ID with Complex local incident number for COMPLEX_ID field). The following fires were identified as meeting our collection criteria but are not included in this version and will hopefully be added in a future update: Addie (2024-CACND-002119), Alpaugh (2024-CACND-001715), South (2024-CATIA-001375). One perimeter is missing containment date that will be updated in the next release.

Cross checking CALFIRS reporting for new CAL FIRE submissions to ensure accuracy with cause class was added to the compilation process. The cause class domain description for “Powerline” was updated to “Electrical Power” to be more inclusive of cause reports.

Includes separate layers filtered by criteria as follows:

California Fire Perimeters (All): Unfiltered. The entire collection of wildfire perimeters in the database. It is scale dependent and starts displaying at the country level scale.

Recent Large Fire Perimeters (≥5000 acres): Filtered for wildfires greater or equal to 5,000 acres for the last 5 years of fires (2020-January 2025), symbolized with color by year and is scale dependent and starts displaying at the country level scale. Year-only labels for recent large fires.

California Fire Perimeters (1950+): Filtered for wildfires that started in 1950-January 2025. Symbolized by decade, and display starting at country level scale.

Detailed metadata is included in the following documents:

Wildland Fire Perimeters (Firep24_1) Metadata

For any questions, please contact the data steward:

Kim Wallin, GIS Specialist

CAL FIRE, Fire & Resource Assessment Program (FRAP)

kimberly.wallin@fire.ca.gov

Layer and Metadata Provided by CALFIREThis data should be used carefully for statistical analysis and reporting due to missing perimeters (see Use Limitation in metadata). Some fires are missing because historical records were lost or damaged, were too small for the minimum cutoffs, had inadequate documentation or have not yet been incorporated into the database. Other known errors with the fire perimeter database include duplicate fires and over-generalization. Over-generalization, particularly with large old fires, may show unburned "islands" within the final perimeter as burned. Users of the fire perimeter database must exercise caution in application of the data. Careful use of the fire perimeter database will prevent users from drawing inaccurate or erroneous conclusions from the data. This dataset may differ in California compared to that available from the National Interagency Fire Center (NIFC) due to different requirements between the two datasets. The data covers fires back to 1878. Please help improve this dataset by filling out this survey with feedback:Historic Fire Perimeter Dataset Feedback (arcgis.com) Current criteria for data collection are as follows:CAL FIRE (including contract counties) submit perimeters ≥10 acres in timber, ≥50 acres in brush, or ≥300 acres in grass, and/or ≥3 impacted residential or commercial structures, and/or caused ≥1 fatality.All cooperating agencies submit perimeters ≥10 acres.Version update:Firep23_1 was released in May 2024. Two hundred eighty four fires from the 2023 fire season were added to the database (21 from BLM, 102 from CAL FIRE, 72 from Contract Counties, 19 from LRA, 9 from NPS, 57 from USFS and 4 from USFW). The 2020 Cottonwood fire, 2021 Lone Rock and Union fires, as well as the 2022 Lost Lake fire were added. USFW submitted a higher accuracy perimeter to replace the 2022 River perimeter. Additionally, 48 perimeters were digitized from an historical map included in a publication from Weeks, d. et al. The Utilization of El Dorado County Land. May 1934, Bulletin 572. University of California, Berkeley. Two thousand eighteen perimeters had attributes updated, the bulk of which had IRWIN IDs added. A duplicate 2020 Erbes perimeter was removed. The following fires were identified as meeting our collection criteria, but are not included in this version and will hopefully be added in the next update: Big Hill #2 (2023-CAHIA-001020). YEAR_ field changed to a short integer type. San Diego CAL FIRE UNIT_ID changed to SDU (the former code MVU is maintained in the UNIT_ID domains). COMPLEX_INCNUM renamed to COMPLEX_ID and is in process of transitioning from local incident number to the complex IRWIN ID. Perimeters managed in a complex in 2023 are added with the complex IRWIN ID. Those previously added will transition to complex IRWIN IDs in a future update. Detailed metadata is included in the following documents:Wildland Fire Perimeters (Firep23_1) Metadata For any questions, please contact the data steward:Kim Wallin, GIS SpecialistCAL FIRE, Fire & Resource Assessment Program (FRAP)kimberly.wallin@fire.ca.gov

This ArcGIS Online hosted feature service displays perimeters from the National Incident Feature Service (NIFS) that meet ALL of the following criteria:

This layer is no longer being actively maintained and will be retired by December 2024. Replacement layer here. This layer contains the fire perimeters from 2018 only, for California. Perimeters are sourced from the Fire and Resource Assessment Program (FRAP) and are updated shortly after the end of each calendar year. Information below is from the FRAP web site.About the Perimeters in this LayerInitially CAL FIRE and the USDA Forest Service jointly developed a fire perimeter GIS layer for public and private lands throughout California. The data covered the period 1950 to 2001 and included USFS wildland fires 10 acres and greater, and CAL FIRE fires 300 acres and greater. BLM and NPS joined the effort in 2002, collecting fires 10 acres and greater. Also in 2002, CAL FIRE’s criteria expanded to include timber fires 10 acres and greater in size, brush fires 50 acres and greater in size, grass fires 300 acres and greater in size, wildland fires destroying three or more structures, and wildland fires causing $300,000 or more in damage. As of 2014, the monetary requirement was dropped and the damage requirement is 3 or more habitable structures or commercial structures.In 1989, CAL FIRE units were requested to fill in gaps in their fire perimeter data as part of the California Fire Plan. FRAP provided each unit with a preliminary map of 1950-89 fire perimeters. Unit personnel also verified the pre-1989 perimeter maps to determine if any fires were missing or should be re-mapped. Each CAL FIRE Unit then generated a list of 300+ acre fires that started since 1989 using the CAL FIRE Emergency Activity Reporting System (EARS). The CAL FIRE personnel used this list to gather post-1989 perimeter maps for digitizing. The final product is a statewide GIS layer spanning the period 1950-1999.CAL FIRE has completed inventory for the majority of its historical perimeters back to 1950. BLM fire perimeters are complete from 2002 to the present. The USFS has submitted records as far back as 1878. The NPS records date to 1921.About the ProgramFRAP compiles fire perimeters and has established an on-going fire perimeter data capture process. CAL FIRE, the United States Forest Service Region 5, the Bureau of Land Management, and the National Park Service jointly develop the fire perimeter GIS layer for public and private lands throughout California at the end of the calendar year. Upon release, the data is current as of the last calendar year.The fire perimeter database represents the most complete digital record of fire perimeters in California. However it is still incomplete in many respects. Fire perimeter database users must exercise caution to avoid inaccurate or erroneous conclusions. For more information on potential errors and their source please review the methodology section of these pages.The fire perimeters database is an Esri ArcGIS file geodatabase with three data layers (feature classes):A layer depicting wildfire perimeters from contributing agencies current as of the previous fire year (Burn areas);A layer depicting prescribed fires supplied from contributing agencies current as of the previous fire year (Prescribed burns);A layer representing non-prescribed fire fuel reduction projects that were initially included in the database. Fuels reduction projects that are non prescribed fire are no longer included (Other burns).All three are available in this layer. Additionally, you can find related web maps, view layers set up for individual years or decades, and tile layers here.Recommended UsesThere are many uses for fire perimeter data. For example, it is used on incidents to locate recently burned areas that may affect fire behavior (see map left).Other uses include:Improving fire prevention, suppression, and initial attack success.Reduce and track hazards and risks in urban interface areas.Provide information for fire ecology studies for example studying fire effects on vegetation over time.Download the Fire Perimeter GIS data hereDownload a statewide map of Fire Perimeters hereSource: Fire and Resource Assessment Program (FRAP)

The California Department of Forestry and Fire Protection's Fire and Resource Assessment Program (FRAP) annually maintains and distributes an historical wildland fire perimeter dataset from across public and private lands in California. The GIS data is developed with the cooperation of the United States Forest Service Region 5, the Bureau of Land Management, California State Parks, National Park Service and the United States Fish and Wildlife Service and is released in the spring with added data from the previous calendar year. Although the dataset represents the most complete digital record of fire perimeters in California, it is still incomplete, and users should be cautious when drawing conclusions based on the data. This data should be used carefully for statistical analysis and reporting due to missing perimeters (see Use Limitation in metadata). Some fires are missing because historical records were lost or damaged, were too small for the minimum cutoffs, had inadequate documentation or have not yet been incorporated into the database. Other errors with the fire perimeter database include duplicate fires and over-generalization. Additionally, over-generalization, particularly with large old fires, may show unburned "islands" within the final perimeter as burned. Users of the fire perimeter database must exercise caution in application of the data. Careful use of the fire perimeter database will prevent users from drawing inaccurate or erroneous conclusions from the data. This data is updated annually in the spring with fire perimeters from the previous fire season. This dataset may differ in California compared to that available from the National Interagency Fire Center (NIFC) due to different requirements between the two datasets. The data covers fires back to 1878. As of May 2024, it represents fire23_1. Please help improve this dataset by filling out this survey with feedback:Historic Fire Perimeter Dataset Feedback (arcgis.com)Current criteria for data collection are as follows:CAL FIRE (including contract counties) submit perimeters ≥10 acres in timber, ≥50 acres in brush, or ≥300 acres in grass, and/or ≥3 impacted residential or commercial structures, and/or caused ≥1 fatality.All cooperating agencies submit perimeters ≥10 acres.Version update:Firep23_1 was released in May 2024. Two hundred eighty four fires from the 2023 fire season were added to the database (21 from BLM, 102 from CAL FIRE, 72 from Contract Counties, 19 from LRA, 9 from NPS, 57 from USFS and 4 from USFW). The 2020 Cottonwood fire, 2021 Lone Rock and Union fires, as well as the 2022 Lost Lake fire were added. USFW submitted a higher accuracy perimeter to replace the 2022 River perimeter. Additionally, 48 perimeters were digitized from an historical map included in a publication from Weeks, d. et al. The Utilization of El Dorado County Land. May 1934, Bulletin 572. University of California, Berkeley. Two thousand eighteen perimeters had attributes updated, the bulk of which had IRWIN IDs added. A duplicate 2020 Erbes perimeter was removed. The following fires were identified as meeting our collection criteria, but are not included in this version and will hopefully be added in the next update: Big Hill #2 (2023-CAHIA-001020). YEAR_ field changed to a short integer type. San Diego CAL FIRE UNIT_ID changed to SDU (the former code MVU is maintained in the UNIT_ID domains). COMPLEX_INCNUM renamed to COMPLEX_ID and is in process of transitioning from local incident number to the complex IRWIN ID. Perimeters managed in a complex in 2023 are added with the complex IRWIN ID. Those previously added will transition to complex IRWIN IDs in a future update.Includes separate layers filtered by criteria as follows:California Fire Perimeters (All): Unfiltered. The entire collection of wildfire perimeters in the database. It is scale dependent and starts displaying at the country level scale. Recent Large Fire Perimeters (≥5000 acres): Filtered for wildfires greater or equal to 5,000 acres for the last 5 years of fires (2019-2023), symbolized with color by year and is scale dependent and starts displaying at the country level scale. Year-only labels for recent large fires.California Fire Perimeters (1950+): Filtered for wildfires that started in 1950-present. Symbolized by decade, and display starting at country level scale.Detailed metadata is included in the following documents:Wildland Fire Perimeters (Firep23_1) Metadata For any questions, please contact the data steward:Kim Wallin, GIS SpecialistCAL FIRE, Fire & Resource Assessment Program (FRAP)kimberly.wallin@fire.ca.gov

This is a copy of another layer - see original source: https://www.arcgis.com/home/item.html?id=e02b85c0ea784ce7bd8add7ae3d293d0OverviewThe national fire history perimeter data layer of conglomerated Agency Authoratative perimeters was developed in support of the WFDSS application and wildfire decision support for the 2021 fire season. The layer encompasses the final fire perimeter datasets of the USDA Forest Service, US Department of Interior Bureau of Land Management, Bureau of Indian Affairs, Fish and Wildlife Service, and National Park Service, the Alaska Interagency Fire Center, CalFire, and WFIGS History. Perimeters are included thru the 2021 fire season. Requirements for fire perimeter inclusion, such as minimum acreage requirements, are set by the contributing agencies. WFIGS, NPS and CALFIRE data now include Prescribed Burns. Data InputSeveral data sources were used in the development of this layer:Alaska fire history USDA FS Regional Fire History Data BLM Fire Planning and Fuels National Park Service - Includes Prescribed Burns Fish and Wildlife ServiceBureau of Indian AffairsCalFire FRAS - Includes Prescribed BurnsWFIGS - BLM & BIA and other S&LData LimitationsFire perimeter data are often collected at the local level, and fire management agencies have differing guidelines for submitting fire perimeter data. Often data are collected by agencies only once annually. If you do not see your fire perimeters in this layer, they were not present in the sources used to create the layer at the time the data were submitted. A companion service for perimeters entered into the WFDSS application is also available, if a perimeter is found in the WFDSS service that is missing in this Agency Authoratative service or a perimeter is missing in both services, please contact the appropriate agency Fire GIS Contact listed in the table below.AttributesThis dataset implements the NWCG Wildland Fire Perimeters (polygon) data standard.https://www.nwcg.gov/sites/default/files/stds/WildlandFirePerimeters_definition.pdfIRWINID - Primary key for linking to the IRWIN Incident dataset. The origin of this GUID is the wildland fire locations point data layer. (This unique identifier may NOT replace the GeometryID core attribute)INCIDENT - The name assigned to an incident; assigned by responsible land management unit. (IRWIN required). Officially recorded name.FIRE_YEAR (Alias) - Calendar year in which the fire started. Example: 2013. Value is of type integer (FIRE_YEAR_INT).AGENCY - Agency assigned for this fire - should be based on jurisdiction at origin.SOURCE - System/agency source of record from which the perimeter came.DATE_CUR - The last edit, update, or other valid date of this GIS Record. Example: mm/dd/yyyy.MAP_METHOD - Controlled vocabulary to define how the geospatial feature was derived. Map method may help define data quality.GPS-Driven; GPS-Flight; GPS-Walked; GPS-Walked/Driven; GPS-Unknown Travel Method; Hand Sketch; Digitized-Image; Digitized-Topo; Digitized-Other; Image Interpretation; Infrared Image; Modeled; Mixed Methods; Remote Sensing Derived; Survey/GCDB/Cadastral; Vector; OtherGIS_ACRES - GIS calculated acres within the fire perimeter. Not adjusted for unburned areas within the fire perimeter. Total should include 1 decimal place. (ArcGIS: Precision=10; Scale=1). Example: 23.9UNQE_FIRE_ - Unique fire identifier is the Year-Unit Identifier-Local Incident Identifier (yyyy-SSXXX-xxxxxx). SS = State Code or International Code, XXX or XXXX = A code assigned to an organizational unit, xxxxx = Alphanumeric with hyphens or periods. The unit identifier portion corresponds to the POINT OF ORIGIN RESPONSIBLE AGENCY UNIT IDENTIFIER (POOResonsibleUnit) from the responsible unit’s corresponding fire report. Example: 2013-CORMP-000001LOCAL_NUM - Local incident identifier (dispatch number). A number or code that uniquely identifies an incident for a particular local fire management organization within a particular calendar year. Field is string to allow for leading zeros when the local incident identifier is less than 6 characters. (IRWIN required). Example: 123456.UNIT_ID - NWCG Unit Identifier of landowner/jurisdictional agency unit at the point of origin of a fire. (NFIRS ID should be used only when no NWCG Unit Identifier exists). Example: CORMPCOMMENTS - Additional information describing the feature. Free Text.FEATURE_CA - Type of wildland fire polygon: Wildfire (represents final fire perimeter or last daily fire perimeter available) or Prescribed Fire or UnknownGEO_ID - Primary key for linking geospatial objects with other database systems. Required for every feature. This field may be renamed for each standard to fit the feature. Globally Unique Identifier (GUID).Cross-Walk from sources (GeoID) and other processing notesAK: GEOID = OBJECT ID of provided file geodatabase (4580 Records thru 2021), other federal sources for AK data removed. CA: GEOID = OBJECT ID of downloaded file geodatabase (12776 Records, federal fires removed, includes RX)FWS: GEOID = OBJECTID of service download combined history 2005-2021 (2052 Records). Handful of WFIGS (11) fires added that were not in FWS record.BIA: GEOID = "FireID" 2017/2018 data (416 records) provided or WFDSS PID (415 records). An additional 917 fires from WFIGS were added, GEOID=GLOBALID in source.NPS: GEOID = EVENT ID (IRWINID or FRM_ID from FOD), 29,943 records includes RX.BLM: GEOID = GUID from BLM FPER and GLOBALID from WFIGS. Date Current = best available modify_date, create_date, fire_cntrl_dt or fire_dscvr_dt to reduce the number of 9999 entries in FireYear. Source FPER (25,389 features), WFIGS (5357 features)USFS: GEOID=GLOBALID in source, 46,574 features. Also fixed Date Current to best available date from perimeterdatetime, revdate, discoverydatetime, dbsourcedate to reduce number of 1899 entries in FireYear.Relevant Websites and ReferencesAlaska Fire Service: https://afs.ak.blm.gov/CALFIRE: https://frap.fire.ca.gov/mapping/gis-dataBIA - data prior to 2017 from WFDSS, 2017-2018 Agency Provided, 2019 and after WFIGSBLM: https://gis.blm.gov/arcgis/rest/services/fire/BLM_Natl_FirePerimeter/MapServerNPS: New data set provided from NPS Fire & Aviation GIS. cross checked against WFIGS for any missing perimetersFWS -https://services.arcgis.com/QVENGdaPbd4LUkLV/arcgis/rest/services/USFWS_Wildfire_History_gdb/FeatureServerUSFS - https://apps.fs.usda.gov/arcx/rest/services/EDW/EDW_FireOccurrenceAndPerimeter_01/MapServerAgency Fire GIS ContactsRD&A Data ManagerVACANTSusan McClendonWFM RD&A GIS Specialist208-258-4244send emailJill KuenziUSFS-NIFC208.387.5283send email Joseph KafkaBIA-NIFC208.387.5572send emailCameron TongierUSFWS-NIFC208.387.5712send emailSkip EdelNPS-NIFC303.969.2947send emailJulie OsterkampBLM-NIFC208.258.0083send email Jennifer L. Jenkins Alaska Fire Service 907.356.5587 send emailLayers

This map feeds into a web app that allows a user to examine the known status of structures damaged by the wildfire. If a structure point does not appear on the map it may still have been impacted by the fire. Specific addresses can be searched for in the search bar. Use the imagery and topographic basemaps and photos to positively identify a structure. Photos may only be available for damaged and destroyed structures.For more information about the wildfire response efforts, visit the CAL FIRE incident page.

This layer contains the fire perimeters from the previous calendar year, and those dating back to 1878, for California. Perimeters are sourced from the Fire and Resource Assessment Program (FRAP) and are updated shortly after the end of each calendar year. Information below is from the FRAP web site. There is also a tile cache version of this layer.About the Perimeters in this LayerInitially CAL FIRE and the USDA Forest Service jointly developed a fire perimeter GIS layer for public and private lands throughout California. The data covered the period 1950 to 2001 and included USFS wildland fires 10 acres and greater, and CAL FIRE fires 300 acres and greater. BLM and NPS joined the effort in 2002, collecting fires 10 acres and greater. Also in 2002, CAL FIRE’s criteria expanded to include timber fires 10 acres and greater in size, brush fires 50 acres and greater in size, grass fires 300 acres and greater in size, wildland fires destroying three or more structures, and wildland fires causing $300,000 or more in damage. As of 2014, the monetary requirement was dropped and the damage requirement is 3 or more habitable structures or commercial structures.In 1989, CAL FIRE units were requested to fill in gaps in their fire perimeter data as part of the California Fire Plan. FRAP provided each unit with a preliminary map of 1950-89 fire perimeters. Unit personnel also verified the pre-1989 perimeter maps to determine if any fires were missing or should be re-mapped. Each CAL FIRE Unit then generated a list of 300+ acre fires that started since 1989 using the CAL FIRE Emergency Activity Reporting System (EARS). The CAL FIRE personnel used this list to gather post-1989 perimeter maps for digitizing. The final product is a statewide GIS layer spanning the period 1950-1999.CAL FIRE has completed inventory for the majority of its historical perimeters back to 1950. BLM fire perimeters are complete from 2002 to the present. The USFS has submitted records as far back as 1878. The NPS records date to 1921.About the ProgramFRAP compiles fire perimeters and has established an on-going fire perimeter data capture process. CAL FIRE, the United States Forest Service Region 5, the Bureau of Land Management, and the National Park Service jointly develop the fire perimeter GIS layer for public and private lands throughout California at the end of the calendar year. Upon release, the data is current as of the last calendar year.The fire perimeter database represents the most complete digital record of fire perimeters in California. However it is still incomplete in many respects. Fire perimeter database users must exercise caution to avoid inaccurate or erroneous conclusions. For more information on potential errors and their source please review the methodology section of these pages.The fire perimeters database is an Esri ArcGIS file geodatabase with three data layers (feature classes):A layer depicting wildfire perimeters from contributing agencies current as of the previous fire year;A layer depicting prescribed fires supplied from contributing agencies current as of the previous fire year;A layer representing non-prescribed fire fuel reduction projects that were initially included in the database. Fuels reduction projects that are non prescribed fire are no longer included.All three are available in this layer. Additionally, you can find related web maps, view layers set up for individual years or decades, and tile layers here.Recommended Uses There are many uses for fire perimeter data. For example, it is used on incidents to locate recently burned areas that may affect fire behavior (see map left).Other uses include:Improving fire prevention, suppression, and initial attack success.Reduce and track hazards and risks in urban interface areas.Provide information for fire ecology studies for example studying fire effects on vegetation over time. Download the Fire Perimeter GIS data hereDownload a statewide map of Fire Perimeters hereSource: Fire and Resource Assessment Program (FRAP)

This layer is no longer being actively maintained and will be retired by December 2024. Replacement layer here. This layer contains the fire perimeters from 2020 only, for California. Perimeters are sourced from the Fire and Resource Assessment Program (FRAP) and are updated shortly after the end of each calendar year. Information below is from the FRAP web site.About the Perimeters in this LayerInitially CAL FIRE and the USDA Forest Service jointly developed a fire perimeter GIS layer for public and private lands throughout California. The data covered the period 1950 to 2001 and included USFS wildland fires 10 acres and greater, and CAL FIRE fires 300 acres and greater. BLM and NPS joined the effort in 2002, collecting fires 10 acres and greater. Also in 2002, CAL FIRE’s criteria expanded to include timber fires 10 acres and greater in size, brush fires 50 acres and greater in size, grass fires 300 acres and greater in size, wildland fires destroying three or more structures, and wildland fires causing $300,000 or more in damage. As of 2014, the monetary requirement was dropped and the damage requirement is 3 or more habitable structures or commercial structures.In 1989, CAL FIRE units were requested to fill in gaps in their fire perimeter data as part of the California Fire Plan. FRAP provided each unit with a preliminary map of 1950-89 fire perimeters. Unit personnel also verified the pre-1989 perimeter maps to determine if any fires were missing or should be re-mapped. Each CAL FIRE Unit then generated a list of 300+ acre fires that started since 1989 using the CAL FIRE Emergency Activity Reporting System (EARS). The CAL FIRE personnel used this list to gather post-1989 perimeter maps for digitizing. The final product is a statewide GIS layer spanning the period 1950-1999.CAL FIRE has completed inventory for the majority of its historical perimeters back to 1950. BLM fire perimeters are complete from 2002 to the present. The USFS has submitted records as far back as 1878. The NPS records date to 1921.About the ProgramFRAP compiles fire perimeters and has established an on-going fire perimeter data capture process. CAL FIRE, the United States Forest Service Region 5, the Bureau of Land Management, and the National Park Service jointly develop the fire perimeter GIS layer for public and private lands throughout California at the end of the calendar year. Upon release, the data is current as of the last calendar year.The fire perimeter database represents the most complete digital record of fire perimeters in California. However it is still incomplete in many respects. Fire perimeter database users must exercise caution to avoid inaccurate or erroneous conclusions. For more information on potential errors and their source please review the methodology section of these pages.The fire perimeters database is an Esri ArcGIS file geodatabase with three data layers (feature classes):A layer depicting wildfire perimeters from contributing agencies current as of the previous fire year (Burn areas);A layer depicting prescribed fires supplied from contributing agencies current as of the previous fire year (Prescribed burns);A layer representing non-prescribed fire fuel reduction projects that were initially included in the database. Fuels reduction projects that are non prescribed fire are no longer included (Other burns).All three are available in this layer. Additionally, you can find related web maps, view layers set up for individual years or decades, and tile layers here.Recommended UsesThere are many uses for fire perimeter data. For example, it is used on incidents to locate recently burned areas that may affect fire behavior (see map left).Other uses include:Improving fire prevention, suppression, and initial attack success.Reduce and track hazards and risks in urban interface areas.Provide information for fire ecology studies for example studying fire effects on vegetation over time.Download the Fire Perimeter GIS data hereDownload a statewide map of Fire Perimeters hereSource: Fire and Resource Assessment Program (FRAP)

Interagency Wildland Fire PerimetersOverviewThis national fire history perimeter data layer of conglomerated agency perimeters was developed in support of the WFDSS application and wildfire decision support. The layer encompasses the fire perimeter datasets of the USDA Forest Service, US Department of Interior Bureau of Land Management, Bureau of Indian Affairs, Fish and Wildlife Service, and National Park Service, the Alaska Interagency Fire Center, CalFire, and WFIGS History. Perimeters are included thru the 2023 fire season. Requirements for fire perimeter inclusion, such as minimum acreage requirements, are set by the contributing agencies. WFIGS, NPS and CALFIRE data now include Prescribed Burns. Data InputSeveral data sources were used in the development of this layer, links are provided where possible below. In addition, many agencies are now using WFIGS as their authoritative source, beginning in mid-2020.Alaska fire history USDA FS Regional Fire History Data BLM Fire Planning and Fuels National Park Service - Includes Prescribed Burns Fish and Wildlife ServiceBureau of Indian AffairsCalFire FRAS - Includes Prescribed BurnsWFIGS - BLM & BIA and other S&LData LimitationsFire perimeter data are often collected at the local level, and fire management agencies have differing guidelines for submitting fire perimeter data. Often data are collected by agencies only once annually. If you do not see your fire perimeters in this layer, they were not present in the sources used to create the layer at the time the data were submitted. A companion service for perimeters entered into the WFDSS application is also available, if a perimeter is found in the WFDSS service that is missing in this Agency Authoritative service or a perimeter is missing in both services, please contact the appropriate agency Fire GIS Contact listed in the table below.AttributesThis dataset implements the NWCG Wildland Fire Perimeters (polygon) data standard.https://www.nwcg.gov/sites/default/files/stds/WildlandFirePerimeters_definition.pdfIRWINID - Primary key for linking to the IRWIN Incident dataset. The origin of this GUID is the wildland fire locations point data layer. (This unique identifier may NOT replace the GeometryID core attribute)INCIDENT - The name assigned to an incident; assigned by responsible land management unit. (IRWIN required). Officially recorded name.FIRE_YEAR (Alias) - Calendar year in which the fire started. Example: 2013. Value is of type integer (FIRE_YEAR_INT).AGENCY - Agency assigned for this fire - should be based on jurisdiction at origin.SOURCE - System/agency source of record from which the perimeter came.DATE_CUR - The last edit, update, or other valid date of this GIS Record. Example: mm/dd/yyyy.MAP_METHOD - Controlled vocabulary to define how the geospatial feature was derived. Map method may help define data quality.GPS-Driven; GPS-Flight; GPS-Walked; GPS-Walked/Driven; GPS-Unknown Travel Method; Hand Sketch; Digitized-Image; Digitized-Topo; Digitized-Other; Image Interpretation; Infrared Image; Modeled; Mixed Methods; Remote Sensing Derived; Survey/GCDB/Cadastral; Vector; OtherGIS_ACRES - GIS calculated acres within the fire perimeter. Not adjusted for unburned areas within the fire perimeter. Total should include 1 decimal place. (ArcGIS: Precision=10; Scale=1). Example: 23.9UNQE_FIRE_ - Unique fire identifier is the Year-Unit Identifier-Local Incident Identifier (yyyy-SSXXX-xxxxxx). SS = State Code or International Code, XXX or XXXX = A code assigned to an organizational unit, xxxxx = Alphanumeric with hyphens or periods. The unit identifier portion corresponds to the POINT OF ORIGIN RESPONSIBLE AGENCY UNIT IDENTIFIER (POOResonsibleUnit) from the responsible unit’s corresponding fire report. Example: 2013-CORMP-000001LOCAL_NUM - Local incident identifier (dispatch number). A number or code that uniquely identifies an incident for a particular local fire management organization within a particular calendar year. Field is string to allow for leading zeros when the local incident identifier is less than 6 characters. (IRWIN required). Example: 123456.UNIT_ID - NWCG Unit Identifier of landowner/jurisdictional agency unit at the point of origin of a fire. (NFIRS ID should be used only when no NWCG Unit Identifier exists). Example: CORMPCOMMENTS - Additional information describing the feature. Free Text.FEATURE_CA - Type of wildland fire polygon: Wildfire (represents final fire perimeter or last daily fire perimeter available) or Prescribed Fire or UnknownGEO_ID - Primary key for linking geospatial objects with other database systems. Required for every feature. This field may be renamed for each standard to fit the feature. Globally Unique Identifier (GUID).Cross-Walk from sources (GeoID) and other processing notesAK: GEOID = OBJECT ID of provided file geodatabase (4580 Records thru 2021), other federal sources for AK data removed. CA: GEOID = OBJECT ID of downloaded file geodatabase (12776 Records, federal fires removed, includes RX)FWS: GEOID = OBJECTID of service download combined history 2005-2021 (2052 Records). Handful of WFIGS (11) fires added that were not in FWS record.BIA: GEOID = "FireID" 2017/2018 data (416 records) provided or WFDSS PID (415 records). An additional 917 fires from WFIGS were added, GEOID=GLOBALID in source.NPS: GEOID = EVENT ID (IRWINID or FRM_ID from FOD), 29,943 records includes RX.BLM: GEOID = GUID from BLM FPER and GLOBALID from WFIGS. Date Current = best available modify_date, create_date, fire_cntrl_dt or fire_dscvr_dt to reduce the number of 9999 entries in FireYear. Source FPER (25,389 features), WFIGS (5357 features)USFS: GEOID=GLOBALID in source, 46,574 features. Also fixed Date Current to best available date from perimeterdatetime, revdate, discoverydatetime, dbsourcedate to reduce number of 1899 entries in FireYear.Relevant Websites and ReferencesAlaska Fire Service: https://afs.ak.blm.gov/CALFIRE: https://frap.fire.ca.gov/mapping/gis-dataBIA - data prior to 2017 from WFDSS, 2017-2018 Agency Provided, 2019 and after WFIGSBLM: https://gis.blm.gov/arcgis/rest/services/fire/BLM_Natl_FirePerimeter/MapServerNPS: New data set provided from NPS Fire & Aviation GIS. cross checked against WFIGS for any missing perimetersFWS -https://services.arcgis.com/QVENGdaPbd4LUkLV/arcgis/rest/services/USFWS_Wildfire_History_gdb/FeatureServerUSFS - https://apps.fs.usda.gov/arcx/rest/services/EDW/EDW_FireOccurrenceAndPerimeter_01/MapServer

This map feeds into a web app that allows a user to examine the known status of structures damaged by the wildfire. If a structure point does not appear on the map it may still have been impacted by the fire. Specific addresses can be searched for in the search bar. Use the imagery and topographic basemaps and photos to positively identify a structure. Photos may only be available for damaged and destroyed structures.For more information about the wildfire response efforts, visit the CAL FIRE incident page.

This map feeds into a web app that allows a user to examine the known status of structures damaged by the wildfire. If a structure point does not appear on the map it may still have been impacted by the fire. Specific addresses can be searched for in the search bar. Use the imagery and topographic basemaps and photos to positively identify a structure. Photos may only be available for damaged and destroyed structures.For more information about the wildfire response efforts, visit the CAL FIRE incident page.

This map feeds into a web app that allows a user to examine the known status of structures damaged by the wildfire. If a structure point does not appear on the map it may still have been impacted by the fire. Specific addresses can be searched for in the search bar. Use the imagery and topographic basemaps and photos to positively identify a structure. Photos may only be available for damaged and destroyed structures.For more information about the wildfire response efforts, visit the CAL FIRE incident page.

Fire Perimeters were compiled from the CalFire FRAP database (https://frap.fire.ca.gov/mapping/gis-data/) and spatially joined with the administrative boundary of the five ecological provinces within the Pacific Southwest Region (Northern, Sierra Cascade, Central Sierra, Southern Sierra, Southern California). To create a feature layer which could be used in a dashboard setting, the fires were also intersected with the entire region. This means that there are multiple fire boundaries in this datasets for each fire (one for each province where the fire burned, and one that represents the region). Version InformationFirep22_1 was released in April 2023. Three hundred five fires from the 2022 fire season were added to the database (1 from BIA, 8 from BLM, 176 from CAL FIRE, 49 from Contract Counties, 14 from LRA, 8 from NPS, 38 from USFS, and 11 from USFW). The 2021 Dotta (part of Beckwourth Complex), Greenhorn, and Hartman fire perimeters were added. Another 45 fires were added by USFW from 2015-2021. The 1988 Hessel fire was added in LNU. The 2019 Cave fire was replaced with a more detailed perimeter submitted by Santa Barbara County. The 2017 Hudson, 2017 Lake, 2017 Jones, 2017 "37", 2019 Tucker, and 2019 Refuge perimeters were replaced with imagery digitized perimeters from USFW. Attributes were updated for 32 records. One hundred ten perimeters were removed due to duplication or being completely contained outside of California state borders. The field IRWINID was added to provide a unique ID; fires before 2022 are lacking this attribution (with the exception of those added in this publication where possible). The following fires were identified as meeting our collection criteria, but are not included in this version and will hopefully be added in the next update: 2022 Cable (CAL FIRE, AEU), 2022 All American (BIA, CRA).If you would like a full briefing on these adjustments, please contact the data steward, Kim Wallin (kimberly.wallin@fire.ca.gov), CAL FIRE FRAP._CAL FIRE (including contract counties), USDA Forest Service Region 5, USDI Bureau of Land Management & National Park Service, and other agencies jointly maintain a comprehensive fire perimeter GIS layer for public and private lands throughout the state. The data covers fires back to 1878. Current criteria for data collection are as follows:CAL FIRE (including contract counties) submit perimeters ≥10 acres in timber, ≥50 acres in brush, or ≥300 acres in grass, and/or ≥3 damaged/ destroyed residential or commercial structures, and/or caused ≥1 fatality.All cooperating agencies submit perimeters ≥10 acres. _Discrepancies between wildfire perimeter data and CAL FIRE Redbook Large Damaging FiresLarge Damaging fires in California were first defined by the CAL FIRE Redbook, and has changed over time, and differs from the definition initially used to define wildfires required to be submitted for the initial compilation of this digital fire perimeter data. In contrast, the definition of fires whose perimeter should be collected has changed once in the approximately 30 years the data has been in existence. Below are descriptions of changes in data collection criteria used when compiling these two datasets. To facilitate comparison, this metadata includes a summary, by year, of fires in the Redbook, that do not appear in this fire perimeter dataset. It is followed by an enumeration of each “Redbook” fire missing from the spatial data. Wildfire Perimeter criteria~1991: 10 acres timber, 30 acres brush, 300 acres grass, damages or destroys three residence or one commercial structure or does $300,000 worth of damage ~2010: 10 acres timber, 30 acres brush, 300 acres grass, damages or destroys three or more structures (doesn’t include out building, sheds, chicken coops, etc.)Redbook Fire data criteria1979 - Fires of a minimum of 300 acres that burn at least: 30 acres timber or 300 acres brush, or 1500 acres woodland or grass1981 - 1979 criteria plus fires that took ,3000 hours of California Department of Forestry and Fire Protection personnel time to suppress1992 - 1981 criteria plus 1500 acres ag products, or destroys three residence or one commercial structure or does $300,000 damage1993 - 1992 criteria but “three or more structures destroyed” replaces “destroys three residence or one commercial structure” and the 3,000 hours of California Department of Forestry personnel time to suppress is removed2008 - simply 300 acres and larger

Feature layer showing all the fire perimeters tracked by Cal OES GIS for year to date.Fire information is taken from the National Fire and Aviation Management (FAMWEB) in the form of ICS-209 reports. During normal operations these 209 reports are downloaded once a day at 0630, or soon after. During a SOC activation these 209 reports will be downloaded twice a day at 0630 and 1800. Cal OES GIS considers the FAMWEB ICS-209s as the authoritative fire information source.Fire perimeter data is downloaded from the National Interagency Fire Center (NIFC). The data for map is updated daily, M-F, by 0800, the map text by 0900, when there are active fires being tracked by Cal OES.If the SOC is activated the fire map will be updated daily, Sun-Sat, by 0800, the map text by 0900, until the SOC stands down.For a fire to be tracked by Cal OES GIS it needs to be:>100 acres in sizeHave an ICS-209 form.CalOES GIS indicates a fire as contained when it has reached >=90% containment.

The Wildland Fire Interagency Geospatial Services (WFIGS) Group provides authoritative geospatial data products under the interagency Wildland Fire Data Program, hosted in the National Interagency Fire Center (NIFC) ArcGIS Online Organization.The Fire Integrated Real-time Intelligence System (FIRIS) is a public-private partnership program that provides real-time intelligence data and analysis on emerging disaster incidents in California. Funded by the California Office of Emergency Services (CalOES), the funding supports aircraft, a common operating picture, and near-real-time fire modeling by WIFIRE that is available at the onset of emerging incidents.FIRIS uses the Overwatch Imaging platform, which includes an aerial infra-red (IR) platform that integrates cutting-edge technologies provided by Aevex Aviation. FIRIS has two equipped fixed-winged aircraft staffed 7 days a week at two different locations, Sacramento and Los Alamitos California. Additionally, Orange County Fire Authority order and dispatch both aircraft while CalOES administers the data. By transmitting information from satellites onboard the fixed-winged aircraft, highly accurate fire perimeter information make it to ground resources in real-time. That data is fed to Intterra’s wildfire decision support software where WIFIRE retrieves the data for predictive analytics.This public layer was created to be used by the CAL FIRE Communications Program for the CAL FIRE incident map.California Department of Forestry and Fire Protection | CAL FIRE