Medical Service Study Areas (MSSAs)As defined by California's Office of Statewide Health Planning and Development (OSHPD) in 2013, "MSSAs are sub-city and sub-county geographical units used to organize and display population, demographic and physician data" (Source). Each census tract in CA is assigned to a given MSSA. The most recent MSSA dataset (2014) was used. Spatial data are available via OSHPD at the California Open Data Portal. This information may be useful in studying health equity.Definitions:Race/Ethnicity: Race/ethnicity is categorized as: All races/ethnicities, Non-Hispanic (NH) White, NH Black, Asian/Pacific Islander, or Hispanic. "All races" includes all of the above, as well as other and unknown race/ethnicity and American Indian/Alaska Native. The latter two groups are not reported separately due to small numbers for many cancer sites.Racial/Ethnic Composition: Distribution of residents' race/ethnicity (e.g., % Hispanic, % non-Hispanic White, % non-Hispanic Black, % non-Hispanic Asian/Pacific Islander). (Source: US Census, 2010.)Rural: Percent of residents who reside in blocks that are designated as rural. (Source: US Census, 2010.)Foreign Born: Percent of residents who were born outside the United States. (Source: American Community Survey, 2008-2012.)Socioeconomic Status (Neighborhood Level): A composite measure of seven indicator variables created by principal component analysis; indicators include: education, blue-collar job, unemployment, household income, poverty, rent, and house value. Quintiles based on state distribution, with quintile 1 being the lowest SES and 5 being the highest. (Source: American Community Survey, 2008-2012.)Spatial extent: CaliforniaSpatial Unit: MSSACreated: n/aUpdated: n/aSource: California Health MapsContact Email: gbacr@ucsf.eduSource Link: https://www.californiahealthmaps.org/?areatype=mssa&address=&sex=Both&site=AllSite&race=&year=05yr&overlays=none&choropleth=Obesity

Selected variables from the most recent ACS Community Survey (Released 2023) aggregated by Community Area. Additional years will be added as they become available. The underlying algorithm to create the dataset calculates the % of a census tract that falls within the boundaries of a given community area. Given that census tracts and community area boundaries are not aligned, these figures should be considered an estimate. Total population in this dataset: 2,647,621 Total Chicago Population Per ACS 2023: 2,664,452 % Difference: -0.632% There are different approaches in common use for displaying Hispanic or Latino population counts. In this dataset, following the approach taken by the Census Bureau, a person who identifies as Hispanic or Latino will also be counted in the race category with which they identify. However, again following the Census Bureau data, there is also a column for White Not Hispanic or Latino. Code can be found here: https://github.com/Chicago/5-Year-ACS-Survey-Data Community Area Shapefile: https://data.cityofchicago.org/Facilities-Geographic-Boundaries/Boundaries-Community-Areas-current-/cauq-8yn6 Census Area Python Package Documentation: https://census-area.readthedocs.io/en/latest/index.html

The American Community Survey (ACS) is a nationwide survey designed to provide communities a fresh look at how they are changing. The ACS replaced the decennial census long form in 2010 and thereafter by collecting long form type information throughout the decade rather than only once every 10 years. Questionnaires are mailed to a sample of addresses to obtain information about households -- that is, about each person and the housing unit itself. The American Community Survey produces demographic, social, housing and economic estimates in the form of 1-year, 3-year and 5-year estimates based on population thresholds. The strength of the ACS is in estimating population and housing characteristics. The 3-year data provide key estimates for each of the topic areas covered by the ACS for the nation, all 50 states, the District of Columbia, Puerto Rico, every congressional district, every metropolitan area, and all counties and places with populations of 20,000 or more. Although the ACS produces population, demographic and housing unit estimates,it is the Census Bureau's Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns, and estimates of housing units for states and counties. For 2010 and other decennial census years, the Decennial Census provides the official counts of population and housing units.

About this dataset

Context

The dataset tabulates the Dillingham Census Area population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Dillingham Census Area. The dataset can be utilized to understand the population distribution of Dillingham Census Area by age. For example, using this dataset, we can identify the largest age group in Dillingham Census Area.

Key observations

The largest age group in Dillingham Census Area, AK was for the group of age 0-4 years with a population of 464 (9.47%), according to the 2021 American Community Survey. At the same time, the smallest age group in Dillingham Census Area, AK was the 80-84 years with a population of 32 (0.65%). Source: U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Dillingham Census Area is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Dillingham Census Area total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Dillingham Census Area Population by Age. You can refer the same here

Key Table Information.Table Title.Nonemployer Statistics by Demographics series (NES-D): Statistics for Employer and Nonemployer Firms by Industry and Ethnicity for the U.S., States, Metro Areas, Counties, and Places: 2022.Table ID.ABSNESD2022.AB00MYNESD01B.Survey/Program.Economic Surveys.Year.2022.Dataset.ECNSVY Nonemployer Statistics by Demographics Company Summary.Source.U.S. Census Bureau, 2022 Economic Surveys, Nonemployer Statistics by Demographics.Release Date.2025-05-08.Release Schedule.The Nonemployer Statistics by Demographics (NES-D) is released yearly, beginning in 2017..Sponsor.National Center for Science and Engineering Statistics, U.S. National Science Foundation.Table Universe.Data in this table combines estimates from the Annual Business Survey (employer firms) and the Nonemployer Statistics by Demographics (nonemployer firms).Includes U.S. firms with no paid employment or payroll, annual receipts of $1,000 or more ($1 or more in the construction industries) and filing Internal Revenue Service (IRS) tax forms for sole proprietorships (Form 1040, Schedule C), partnerships (Form 1065), or corporations (the Form 1120 series).Includes U.S. employer firms estimates of business ownership by sex, ethnicity, race, and veteran status from the 2023 Annual Business Survey (ABS) collection. The employer business dataset universe consists of employer firms that are in operation for at least some part of the reference year, are located in one of the 50 U.S. states, associated offshore areas, or the District of Columbia, have paid employees and annual receipts of $1,000 or more, and are classified in one of nineteen in-scope sectors defined by the 2022 North American Industry Classification System (NAICS), except for NAICS 111, 112, 482, 491, 521, 525, 813, 814, and 92 which are not covered.Data are also obtained from administrative records, the 2022 Economic Census, and other economic surveys. Note: For employer data only, the collection year is the year in which the data are collected. A reference year is the year that is referenced in the questions on the survey and in which the statistics are tabulated. For example, the 2023 ABS collection year produces statistics for the 2022 reference year. The "Year" column in the table is the reference year..Methodology.Data Items and Other Identifying Records.Total number of employer and nonemployer firmsTotal sales, value of shipments, or revenue of employer and nonemployer firms ($1,000)Number of nonemployer firmsSales, value of shipments, or revenue of nonemployer firms ($1,000)Number of employer firmsSales, value of shipments, or revenue of employer firms ($1,000)Number of employeesAnnual payroll ($1,000)These data are aggregated by the following demographic classifications of firm for:All firms Classifiable (firms classifiable by sex, ethnicity, race, and veteran status) Ethnicity Hispanic Equally Hispanic/non-Hispanic Non-Hispanic Unclassifiable (firms not classifiable by sex, ethnicity, race, and veteran status) Definitions can be found by clicking on the column header in the table or by accessing the Economic Census Glossary..Unit(s) of Observation.The reporting units for the NES-D and the ABS are companies or firms rather than establishments. A company or firm is comprised of one or more in-scope establishments that operate under the ownership or control of a single organization..Geography Coverage.The 2022 data are shown for the total of all sectors (00) and the 2- to 6-digit NAICS code levels for:United StatesStates and the District of ColumbiaIn addition, the total of all sectors (00) NAICS and the 2-digit NAICS code levels for:Metropolitan Statistical AreasMicropolitan Statistical AreasMetropolitan DivisionsCombined Statistical AreasCountiesEconomic PlacesFor information about geographies, see Geographies..Industry Coverage.The data are shown for the total of all sectors ("00"), and at the 2- through 6-digit NAICS code levels depending on geography. Sector "00" is not an official NAICS sector but is rather a way to indicate a total for multiple sectors. Note: Other programs outside of ABS may use sector 00 to indicate when multiple NAICS sectors are being displayed within the same table and/or dataset.The following are excluded from the total of all sectors:Crop and Animal Production (NAICS 111 and 112)Rail Transportation (NAICS 482)Postal Service (NAICS 491)Monetary Authorities-Central Bank (NAICS 521)Funds, Trusts, and Other Financial Vehicles (NAICS 525)Office of Notaries (NAICS 541120)Religious, Grantmaking, Civic, Professional, and Similar Organizations (NAICS 813)Private Households (NAICS 814)Public Administration (NAICS 92)For information about NAICS, see North American Industry Classification System..Sampling.NES-D nonemployer data are not conducted through sampling. Nonemployer Statistics (NES) data originate from statistical information obtained through business income tax records that the Internal Revenue Service (IRS) provides to the...

Dataset contains counts and measures for individuals from the 2013, 2018, and 2023 Censuses. Data is available by statistical area 2.

​

The variables included in this dataset are for the census usually resident population count (unless otherwise stated). All data is for level 1 of the classification (unless otherwise stated).

​

The variables for part 1 of the dataset are:

• Census usually resident population count
• Census night population count
• Age (5-year groups)
• Age (life cycle groups)
• Median age
• Birthplace (NZ born/overseas born)
• Birthplace (broad geographic areas)
• Ethnicity (total responses) for level 1 and ‘Other Ethnicity’ grouped by ‘New Zealander’ and ‘Other Ethnicity nec’
• Māori descent indicator
• Languages spoken (total responses)
• Official language indicator
• Gender
• Cisgender and transgender status – census usually resident population count aged 15 years and over
• Sex at birth
• Rainbow/LGBTIQ+ indicator for the census usually resident population count aged 15 years and over
• Sexual identity for the census usually resident population count aged 15 years and over
• Legally registered relationship status for the census usually resident population count aged 15 years and over
• Partnership status in current relationship for the census usually resident population count aged 15 years and over
• Number of children born for the sex at birth female census usually resident population count aged 15 years and over
• Average number of children born for the sex at birth female census usually resident population count aged 15 years and over
• Religious affiliation (total responses)
• Cigarette smoking behaviour for the census usually resident population count aged 15 years and over
• Disability indicator for the census usually resident population count aged 5 years and over
• Difficulty communicating for the census usually resident population count aged 5 years and over
• Difficulty hearing for the census usually resident population count aged 5 years and over
• Difficulty remembering or concentrating for the census usually resident population count aged 5 years and over
• Difficulty seeing for the census usually resident population count aged 5 years and over
• Difficulty walking for the census usually resident population count aged 5 years and over
• Difficulty washing for the census usually resident population count aged 5 years and over.

​

Download lookup file for part 1 from Stats NZ ArcGIS Online or embedded attachment in Stats NZ geographic data service. Download data table (excluding the geometry column for CSV files) using the instructions in the Koordinates help guide.

​

Footnotes

Te Whata

Under the Mana Ōrite Relationship Agreement, Te Kāhui Raraunga (TKR) will be publishing Māori descent and iwi affiliation data from the 2023 Census in partnership with Stats NZ. This will be available on Te Whata, a TKR platform.

​

Geographical boundaries

Statistical standard for geographic areas 2023 (updated December 2023) has information about geographic boundaries as of 1 January 2023. Address data from 2013 and 2018 Censuses was updated to be consistent with the 2023 areas. Due to the changes in area boundaries and coding methodologies, 2013 and 2018 counts published in 2023 may be slightly different to those published in 2013 or 2018.

​

Subnational census usually resident population

The census usually resident population count of an area (subnational count) is a count of all people who usually live in that area and were present in New Zealand on census night. It excludes visitors from overseas, visitors from elsewhere in New Zealand, and residents temporarily overseas on census night. For example, a person who usually lives in Christchurch city and is visiting Wellington city on census night will be included in the census usually resident population count of Christchurch city.

​

Population counts

Stats NZ publishes a number of different population counts, each using a different definition and methodology. Population statistics – user guide has more information about different counts.

​

Caution using time series

Time series data should be interpreted with care due to changes in census methodology and differences in response rates between censuses. The 2023 and 2018 Censuses used a combined census methodology (using census responses and administrative data), while the 2013 Census used a full-field enumeration methodology (with no use of administrative data).

​

Study participation time series

In the 2013 Census study participation was only collected for the census usually resident population count aged 15 years and over.

​

About the 2023 Census dataset

For information on the 2023 dataset see Using a combined census model for the 2023 Census. We combined data from the census forms with administrative data to create the 2023 Census dataset, which meets Stats NZ's quality criteria for population structure information. We added real data about real people to the dataset where we were confident the people who hadn’t completed a census form (which is known as admin enumeration) will be counted. We also used data from the 2018 and 2013 Censuses, administrative data sources, and statistical imputation methods to fill in some missing characteristics of people and dwellings.

​

Data quality

The quality of data in the 2023 Census is assessed using the quality rating scale and the quality assurance framework to determine whether data is fit for purpose and suitable for release. Data quality assurance in the 2023 Census has more information.

​

Concept descriptions and quality ratings

Data quality ratings for 2023 Census variables has additional details about variables found within totals by topic, for example, definitions and data quality.

​

Disability indicator

This data should not be used as an official measure of disability prevalence. Disability prevalence estimates are only available from the 2023 Household Disability Survey. Household Disability Survey 2023: Final content has more information about the survey.

Activity limitations are measured using the Washington Group Short Set (WGSS). The WGSS asks about six basic activities that a person might have difficulty with: seeing, hearing, walking or climbing stairs, remembering or concentrating, washing all over or dressing, and communicating. A person was classified as disabled in the 2023 Census if there was at least one of these activities that they had a lot of difficulty with or could not do at all.

​

Using data for good

Stats NZ expects that, when working with census data, it is done so with a positive purpose, as outlined in the Māori Data Governance Model (Data Iwi Leaders Group, 2023). This model states that "data should support transformative outcomes and should uplift and strengthen our relationships with each other and with our environments. The avoidance of harm is the minimum expectation for data use. Māori data should also contribute to iwi and hapū tino rangatiratanga”.

​

Confidentiality

The 2023 Census confidentiality rules have been applied to 2013, 2018, and 2023 data. These rules protect the confidentiality of individuals, families, households, dwellings, and undertakings in 2023 Census data. Counts are calculated using fixed random rounding to base 3 (FRR3) and suppression of ‘sensitive’ counts less than six, where tables report multiple geographic variables and/or small populations. Individual figures may not always sum to stated totals. Applying confidentiality rules to 2023 Census data and summary of changes since 2018 and 2013 Censuses has more information about 2023 Census confidentiality rules.

​

Measures

Measures like averages, medians, and other quantiles are calculated from unrounded counts, with input noise added to or subtracted from each contributing value during measures calculations. Averages and medians based on less than six units (e.g. individuals, dwellings, households, families, or extended families) are suppressed. This suppression threshold changes for other quantiles. Where the cells have been suppressed, a placeholder value has been used.

​

Percentages

To calculate percentages, divide the figure for the category of interest by the figure for 'Total stated' where this applies.

​

Symbol

-997 Not available

-999 Confidential

​

Inconsistencies in definitions

Please note that there may be differences in definitions between census classifications and those used for other data collections.

Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, the decennial census is the official source of population totals for April 1st of each decennial year. In between censuses, the Census Bureau's Population Estimates Program produces and disseminates the official estimates of the population for the nation, states, counties, cities, and towns and estimates of housing units and the group quarters population for states and counties..Information about the American Community Survey (ACS) can be found on the ACS website. Supporting documentation including code lists, subject definitions, data accuracy, and statistical testing, and a full list of ACS tables and table shells (without estimates) can be found on the Technical Documentation section of the ACS website.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2019-2023 American Community Survey 5-Year Estimates.ACS data generally reflect the geographic boundaries of legal and statistical areas as of January 1 of the estimate year. For more information, see Geography Boundaries by Year..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Users must consider potential differences in geographic boundaries, questionnaire content or coding, or other methodological issues when comparing ACS data from different years. Statistically significant differences shown in ACS Comparison Profiles, or in data users' own analysis, may be the result of these differences and thus might not necessarily reflect changes to the social, economic, housing, or demographic characteristics being compared. For more information, see Comparing ACS Data..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on 2020 Census data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..Explanation of Symbols:- The estimate could not be computed because there were an insufficient number of sample observations. For a ratio of medians estimate, one or both of the median estimates falls in the lowest interval or highest interval of an open-ended distribution. For a 5-year median estimate, the margin of error associated with a median was larger than the median itself.N The estimate or margin of error cannot be displayed because there were an insufficient number of sample cases in the selected geographic area. (X) The estimate or margin of error is not applicable or not available.median- The median falls in the lowest interval of an open-ended distribution (for example "2,500-")median+ The median falls in the highest interval of an open-ended distribution (for example "250,000+").** The margin of error could not be computed because there were an insufficient number of sample observations.*** The margin of error could not be computed because the median falls in the lowest interval or highest interval of an open-ended distribution.***** A margin of error is not appropriate because the corresponding estimate is controlled to an independent population or housing estimate. Effectively, the corresponding estimate has no sampling error and the margin of error may be treated as zero.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Face refers to the areal (polygon) topological primitives that make up MTDB. A face is bounded by one or more edges; its boundary includes only the edges that separate it from other faces, not any interior edges contained within the area of the face. The Topological Faces Shapefile contains the attributes of each topological primitive face. Each face has a unique topological face identifier (TFID) value. Each face in the shapefile includes the key geographic area codes for all geographic areas for which the Census Bureau tabulates data for both the 2020 Census and the annual estimates and surveys. The geometries of each of these geographic areas can then be built by dissolving the face geometries on the appropriate key geographic area codes in the Topological Faces Shapefile.

This layer was developed by the Research & Analytics Division of the Atlanta Regional Commission using data from the U.S. Census Bureau.

The user should note that American Community Survey data represent estimates derived from a surveyed sample of the population, which creates some level of uncertainty, as opposed to an exact measure of the entire population (the full census count is only conducted once every 10 years and does not cover as many detailed characteristics of the population). Therefore, any measure reported by ACS should not be taken as an exact number – this is why a corresponding margin of error (MOE) is also given for ACS measures. The size of the MOE relative to its corresponding estimate value provides an indication of confidence in the accuracy of each estimate. Each MOE is expressed in the same units as its corresponding measure; for example, if the estimate value is expressed as a number, then its MOE will also be a number; if the estimate value is expressed as a percent, then its MOE will also be a percent.

The user should also note that for relatively small geographic areas, such as census tracts shown here, ACS only releases combined 5-year estimates, meaning these estimates represent rolling averages of survey results that were collected over a 5-year span (in this case 2014-2018). Therefore, these data do not represent any one specific point in time or even one specific year. For geographic areas with larger populations, 3-year and 1-year estimates are also available.

For a deep dive into the data model including every specific metric, see the Infrastructure Manifest. The manifest details ARC-defined naming conventions, field names/descriptions and topics, summary levels; source tables; notes and so forth for all metrics.

For further explanation of ACS estimates and margin of error, visit Census ACS website.

Naming conventions:

Prefixes:

None

Count

p

Percent

r

Rate

m

Median

a

Mean (average)

t

Aggregate (total)

ch

Change in absolute terms (value in t2 - value in t1)

pch

Percent change ((value in t2 - value in t1) / value in t1)

chp

Change in percent (percent in t2 - percent in t1)

s

Significance flag for change: 1 = statistically significant with a 90% Confidence Interval, 0 = not statistically significant, blank = cannot be computed

Suffixes:

_e18

Estimate from 2014-18 ACS

_m18

Margin of Error from 2014-18 ACS

_00_v18

Decennial 2000 in 2018 geography boundary

_00_18

Change, 2000-18

_e10_v18

Estimate from 2006-10 ACS in 2018 geography boundary

_m10_v18

Margin of Error from 2006-10 ACS in 2018 geography boundary

_e10_18

Change, 2010-18

Brazil Population Census: Urban: Age 15 to 19 Years data was reported at 14,039,001.000 Person in 2010. This records a decrease from the previous number of 14,403,539.000 Person for 2000. Brazil Population Census: Urban: Age 15 to 19 Years data is updated yearly, averaging 14,221,270.000 Person from Jul 2000 (Median) to 2010, with 2 observations. The data reached an all-time high of 14,403,539.000 Person in 2000 and a record low of 14,039,001.000 Person in 2010. Brazil Population Census: Urban: Age 15 to 19 Years data remains active status in CEIC and is reported by Brazilian Institute of Geography and Statistics. The data is categorized under Brazil Premium Database’s Socio and Demographic – Table BR.GAC004: Population Census: by Age and Area.

About this dataset

Context

The dataset tabulates the population of Petersburg Census Area by gender, including both male and female populations. This dataset can be utilized to understand the population distribution of Petersburg Census Area across both sexes and to determine which sex constitutes the majority.

Key observations

There is a slight majority of female population, with 50.95% of total population being female. Source: U.S. Census Bureau American Community Survey (ACS) 2018-2022 5-Year Estimates.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2018-2022 5-Year Estimates.

Scope of gender :

Please note that American Community Survey asks a question about the respondents current sex, but not about gender, sexual orientation, or sex at birth. The question is intended to capture data for biological sex, not gender. Respondents are supposed to respond with the answer as either of Male or Female. Our research and this dataset mirrors the data reported as Male and Female for gender distribution analysis. No further analysis is done on the data reported from the Census Bureau.

Variables / Data Columns

• Gender: This column displays the Gender (Male / Female)
• Population: The population of the gender in the Petersburg Census Area is shown in this column.
• % of Total Population: This column displays the percentage distribution of each gender as a proportion of Petersburg Census Area total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Petersburg Census Area Population by Race & Ethnicity. You can refer the same here

These data were developed by the Research & Analytics Group at the Atlanta Regional Commission using data from the U.S. Census Bureau across all standard and custom geographies at statewide summary level where applicable. .
For a deep dive into the data model including every specific metric, see the ACS 2018-2022 Data Manifest. The manifest details ARC-defined naming conventions, field names/descriptions and topics, summary levels; source tables; notes and so forth for all metrics. Find naming convention prefixes/suffixes, geography definitions and user notes below.Prefixes:NoneCountpPercentrRatemMedianaMean (average)tAggregate (total)chChange in absolute terms (value in t2 - value in t1)pchPercent change ((value in t2 - value in t1) / value in t1)chpChange in percent (percent in t2 - percent in t1)sSignificance flag for change: 1 = statistically significant with a 90% CI, 0 = not statistically significant, blank = cannot be computedSuffixes:_e22Estimate from 2018-22 ACS_m22Margin of Error from 2018-22 ACS_e102006-10 ACS, re-estimated to 2020 geography_m10Margin of Error from 2006-10 ACS, re-estimated to 2020 geography_e10_22Change, 2010-22 (holding constant at 2020 geography)GeographiesAAA = Area Agency on Aging (12 geographic units formed from counties providing statewide coverage)ARC21 = Atlanta Regional Commission modeling area (21 counties merged to a single geographic unit)ARWDB7 = Atlanta Regional Workforce Development Board (7 counties merged to a single geographic unit)BeltLineStatistical (buffer)BeltLineStatisticalSub (subareas)Census Tract (statewide)CFGA23 = Community Foundation for Greater Atlanta (23 counties merged to a single geographic unit)City (statewide)City of Atlanta Council Districts (City of Atlanta)City of Atlanta Neighborhood Planning Unit (City of Atlanta)City of Atlanta Neighborhood Statistical Areas (City of Atlanta)County (statewide)Georgia House (statewide)Georgia Senate (statewide)HSSA = High School Statistical Area (11 county region)MetroWater15 = Atlanta Metropolitan Water District (15 counties merged to a single geographic unit)Regional Commissions (statewide)State of Georgia (single geographic unit)Superdistrict (ARC region)US Congress (statewide)UWGA13 = United Way of Greater Atlanta (13 counties merged to a single geographic unit)ZIP Code Tabulation Areas (statewide)The user should note that American Community Survey data represent estimates derived from a surveyed sample of the population, which creates some level of uncertainty, as opposed to an exact measure of the entire population (the full census count is only conducted once every 10 years and does not cover as many detailed characteristics of the population). Therefore, any measure reported by ACS should not be taken as an exact number – this is why a corresponding margin of error (MOE) is also given for ACS measures. The size of the MOE relative to its corresponding estimate value provides an indication of confidence in the accuracy of each estimate. Each MOE is expressed in the same units as its corresponding measure; for example, if the estimate value is expressed as a number, then its MOE will also be a number; if the estimate value is expressed as a percent, then its MOE will also be a percent. The user should also note that for relatively small geographic areas, such as census tracts shown here, ACS only releases combined 5-year estimates, meaning these estimates represent rolling averages of survey results that were collected over a 5-year span (in this case 2018-2022). Therefore, these data do not represent any one specific point in time or even one specific year. For geographic areas with larger populations, 3-year and 1-year estimates are also available. For further explanation of ACS estimates and margin of error, visit Census ACS website.Source: U.S. Census Bureau, Atlanta Regional CommissionDate: 2018-2022Data License: Creative Commons Attribution 4.0 International (CC by 4.0)Link to the data manifest: https://opendata.atlantaregional.com/documents/3b86ee614e614199ba66a3ff1ebfe3b5/about

Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, the decennial census is the official source of population totals for April 1st of each decennial year. In between censuses, the Census Bureau's Population Estimates Program produces and disseminates the official estimates of the population for the nation, states, counties, cities, and towns and estimates of housing units and the group quarters population for states and counties..Information about the American Community Survey (ACS) can be found on the ACS website. Supporting documentation including code lists, subject definitions, data accuracy, and statistical testing, and a full list of ACS tables and table shells (without estimates) can be found on the Technical Documentation section of the ACS website.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2023 American Community Survey 1-Year Estimates.ACS data generally reflect the geographic boundaries of legal and statistical areas as of January 1 of the estimate year. For more information, see Geography Boundaries by Year..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Users must consider potential differences in geographic boundaries, questionnaire content or coding, or other methodological issues when comparing ACS data from different years. Statistically significant differences shown in ACS Comparison Profiles, or in data users' own analysis, may be the result of these differences and thus might not necessarily reflect changes to the social, economic, housing, or demographic characteristics being compared. For more information, see Comparing ACS Data..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on 2020 Census data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..Explanation of Symbols:- The estimate could not be computed because there were an insufficient number of sample observations. For a ratio of medians estimate, one or both of the median estimates falls in the lowest interval or highest interval of an open-ended distribution. For a 5-year median estimate, the margin of error associated with a median was larger than the median itself.N The estimate or margin of error cannot be displayed because there were an insufficient number of sample cases in the selected geographic area. (X) The estimate or margin of error is not applicable or not available.median- The median falls in the lowest interval of an open-ended distribution (for example "2,500-")median+ The median falls in the highest interval of an open-ended distribution (for example "250,000+").** The margin of error could not be computed because there were an insufficient number of sample observations.*** The margin of error could not be computed because the median falls in the lowest interval or highest interval of an open-ended distribution.***** A margin of error is not appropriate because the corresponding estimate is controlled to an independent population or housing estimate. Effectively, the corresponding estimate has no sampling error and the margin of error may be treated as zero.

About this dataset

Context

The dataset presents the the household distribution across 16 income brackets among four distinct age groups in Hoonah-Angoon Census Area: Under 25 years, 25-44 years, 45-64 years, and over 65 years. The dataset highlights the variation in household income, offering valuable insights into economic trends and disparities within different age categories, aiding in data analysis and decision-making..

Key observations

• Upon closer examination of the distribution of households among age brackets, it reveals that there are 31(3.36%) households where the householder is under 25 years old, 144(15.62%) households with a householder aged between 25 and 44 years, 326(35.36%) households with a householder aged between 45 and 64 years, and 421(45.66%) households where the householder is over 65 years old.
• The age group of 25 to 44 years exhibits the highest median household income, while the largest number of households falls within the 65 years and over bracket. This distribution hints at economic disparities within the county of Hoonah-Angoon Census Area, showcasing varying income levels among different age demographics.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Income brackets:

• Less than $10,000
• $10,000 to $14,999
• $15,000 to $19,999
• $20,000 to $24,999
• $25,000 to $29,999
• $30,000 to $34,999
• $35,000 to $39,999
• $40,000 to $44,999
• $45,000 to $49,999
• $50,000 to $59,999
• $60,000 to $74,999
• $75,000 to $99,999
• $100,000 to $124,999
• $125,000 to $149,999
• $150,000 to $199,999
• $200,000 or more

Variables / Data Columns

• Household Income: This column showcases 16 income brackets ranging from Under $10,000 to $200,000+ ( As mentioned above).
• Under 25 years: The count of households led by a head of household under 25 years old with income within a specified income bracket.
• 25 to 44 years: The count of households led by a head of household 25 to 44 years old with income within a specified income bracket.
• 45 to 64 years: The count of households led by a head of household 45 to 64 years old with income within a specified income bracket.
• 65 years and over: The count of households led by a head of household 65 years and over old with income within a specified income bracket.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Hoonah-Angoon Census Area median household income by age. You can refer the same here

Four tables of ACS demographic profiles for 2012 to 2016 at the PUMA level. Four profiles include demographics, economic, housing and sociological. Column headers in this database are abbreviated. Please see the data dictionary (shown in worksheet entitled “Dictionary”) for an explanation of these abbreviated headers.

These data were compiled to help understand how climate change may impact dryland pinyon-juniper ecosystems in coming decades, and how resource management might be able to minimize those impacts. Objective(s) of our study were to model the demographic rates of PJ woodlands to estimate the areas that may decline in the future vs. those that will be stable. We quantified populations growth rates across broad geographic areas, and identified the relative roles of recruitment and mortality in driving potential future changes in population viability in 5 tree species that are major components of these dry forests. We used this demographic model to project pinyon-juniper population stability under future climate conditions, assess how robust these projected changes are, and to identify where on the landscape management strategies that decrease tree competition would effectively resist population decline. These data represent estimated recruitment, mortality and population growth across the distribution of five common pinyon-juniper species across the US Southwest. These data were collected by the US Forest service in their monitoring program, which is a systematic survey of forested regions across the entire US. Our data is from western US states, including AZ, CA, CO, ID, MT, NM, ND, NV, OR, SD, TX, UT, and was collected between 2000-2007, depending on state census collection times. These data were collected by the Forest Inventory and Analysis program of the USDA US Forest Service. Within each established plot, all adult trees greater than 12.7 cm (5 in.) diameter at breast height (DBH) are assigned unique tags and tracked within four, 7.32 m (24 ft.) radius subplots. All saplings <12.7 cm & > 2.54 cm (1 in.) DBH are assigned unique tags and tracked within four, 2.07 m (6.8 ft.) radius microplots within the larger adult plots. Finally, seedlings <2.54 cm DBH are counted within the same microplots as the saplings. Two censuses were conducted 10 years apart in each plot. These data can be used to inform how tree species have unique responses to changing climate conditions and how management actions, like tree density reduction, may effectively resist transformation away from pinyon-juniper woodland to other ecosystem types.

Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, the decennial census is the official source of population totals for April 1st of each decennial year. In between censuses, the Census Bureau's Population Estimates Program produces and disseminates the official estimates of the population for the nation, states, counties, cities, and towns and estimates of housing units and the group quarters population for states and counties..This table provides geographical mobility for persons relative to their previous place of residence. The characteristics crossed by geographical mobility reflect the current survey year. The estimates do not include people who moved to Puerto Rico, other U.S. Island Areas, or Foreign Countries..Information about the American Community Survey (ACS) can be found on the ACS website. Supporting documentation including code lists, subject definitions, data accuracy, and statistical testing, and a full list of ACS tables and table shells (without estimates) can be found on the Technical Documentation section of the ACS website.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2023 American Community Survey 1-Year Estimates.ACS data generally reflect the geographic boundaries of legal and statistical areas as of January 1 of the estimate year. For more information, see Geography Boundaries by Year..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Users must consider potential differences in geographic boundaries, questionnaire content or coding, or other methodological issues when comparing ACS data from different years. Statistically significant differences shown in ACS Comparison Profiles, or in data users' own analysis, may be the result of these differences and thus might not necessarily reflect changes to the social, economic, housing, or demographic characteristics being compared. For more information, see Comparing ACS Data..Tables for Geographical Mobility by Residence 1 Year Ago in the United States are only available for States; Counties; Places; County Subdivisions in selected states (CT, ME, MA, MI, MN, NH, NJ, NY, PA, RI, VT, WI); Combined Statistical Areas; Metropolitan and Micropolitan Statistical Areas, and their associated Metropolitan Divisions and Principal Cities..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on 2020 Census data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..Explanation of Symbols:- The estimate could not be computed because there were an insufficient number of sample observations. For a ratio of medians estimate, one or both of the median estimates falls in the lowest interval or highest interval of an open-ended distribution. For a 5-year median estimate, the margin of error associated with a median was larger than the median itself.N The estimate or margin of error cannot be displayed because there were an insufficient number of sample cases in the selected geographic area. (X) The estimate or margin of error is not applicable or not available.median- The median falls in the lowest interval of an open-ended distribution (for example "2,500-")median+ The median falls in the highest interval of an open-ended distribution (for example "250,000+").** The margin of error could not be computed because there were an insufficient number of sample observations.*** The margin of error could not be computed because the median falls in the lowest interval or highest interval of an open-ended distribution.***** A margin of error is not appropriate because the corresponding estimate is controlled to an independent population or housing estimate. Effectively, the corresponding estimate has no sampling error and the margin of error may be treated as zero.

Socio-Economic Indexes for Areas (SEIFA) is a product developed by the ABS that ranks areas in Australia according to relative socio-economic advantage and disadvantage. The indexes are based on information from the five-yearly Census. SEIFA 2011 is the latest version of this product and consists of four indexes: The Index of Relative Socio-economic Disadvantage (IRSD); The Index of Relative Socio-economic Advantage and Disadvantage (IRSAD); The Index of Education and Occupation (IEO); The Index of Economic Resources (IER). Each index is a summary of a different subset of Census variables and focuses on a different aspect of socio-economic advantage and disadvantage.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Public Use Microdata Areas (PUMAs) are decennial census areas that permit the tabulation and dissemination of Public Use Microdata Sample (PUMS) data, American Community Survey (ACS) data, and data from other census and surveys. For the 2020 Census, the State Data Centers (SDCs) in each state, the District of Columbia, and the Commonwealth of Puerto Rico had the opportunity to delineate PUMAS within their state or statistically equivalent entity. All PUMAs must nest within states and have a minimum population threshold of 100,000 persons. 2020 PUMAs consist of census tracts and cover the entirety of the United States, Puerto Rico and Guam. American Samoa, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands do not contain any 2020 PUMAs because the population is less than the minimum population requirement. Each PUMA is identified by a 5-character numeric census code that may contain leading zeros and a descriptive name. The 2020 PUMAs will appear in the 2022 TIGER/Line Shapefiles.

This table of Housing profile information for dissemination area was downloaded from the Statistics Canada website and joined with bndDisseminationArea2021in DEM. It contains the information gathered during the 2021 Census with respect to the population within a dissemination area and the population breakdown by dwelling and household characteristics. This data covers the dissemination area in York Region only.Statistics Canada has suppressed the profiles for certain areas due to very low population count. Suppressed areas will appear as NULL values in the attribute table.Please exercise caution if using dissemination areas to roll up (aggregate) to other levels of census geographies, due to greater suppression applied by Statistics Canada at dissemination area. Interested in viewing and interacting with this data even more? Visit the York Region Census Explorer Dashboard to gain high level insights from this data at the municipal and regional level for York Region.For more information regarding this data, please refer to the reference document here: https://www12.statcan.gc.ca/census-recensement/2021/dp-pd/prof/details/download-telecharger.cfm