The data in this feature service uses the same polygons as the MassGIS 1:250,000 Surficial Geology data layer (SURFGEO250K_POLY) and includes minimum, maximum, and average specific yield for each surficial unit. Specific yield values were extracted from U.S. Geological Survey groundwater reports and Morris & Johnson (1967) (a total of 60 aquifer tests).The Hydrogeologic Atlas of Massachusetts provides data on the hydraulic properties of the statewide surficial aquifers. The datasets were developed using surficial geology, bedrock altitude, a statewide groundwater flow model, and a compilation of hydraulic property data from U.S. Geological Survey groundwater reports, Massachusetts Department of Environmental Protection Zone II reports, and other Massachusetts-specific journal articles (a total of 23 sources).One of the goals of this project was to understand current and projected future groundwater flooding risks across the state. To understand groundwater flooding risks, we developed a statewide three-dimensional groundwater flow model to simulate the water table elevation. The Hydrogeologic Atlas of Massachusetts compiles new datasets developed as input into the groundwater model, groundwater model simulation results, and other statewide map products created through this project. For further information regarding the methods of this study see Corkran et al. (2024), a report submitted to the Massachusetts Executive Office of Energy and Environmental Affairs.Suggested Citation:Corkran, D., Kirshen, A., Moran, B.J., Blin, N., King, R., Bresee, M., & Boutt, D. (2024). Massachusetts State-wide Groundwater Model and Flooding Risk Assessment 1.0. Report funded by the Massachusetts Executive Office of Energy and Environmental Affairs and published on the ResilientMass website.See full metadata and the map service.

The data in this feature service uses the same polygons as the MassGIS USGS 1:24,000 Surficial Geology data layer and includes minimum, maximum, and average hydraulic conductivity in feet per day for each surficial unit. Hydraulic conductivity values were extracted from U.S. Geological Survey groundwater reports, Massachusetts Department of Environmental Protection Zone II reports, and other Massachusetts-specific journal articles (a total of 165 aquifer tests or aggregates of aquifer tests depending on the available data in each report).The Hydrogeologic Atlas of Massachusetts provides data on the hydraulic properties of the statewide surficial aquifers. The datasets were developed using surficial geology, bedrock altitude, a statewide groundwater flow model, and a compilation of hydraulic property data from U.S. Geological Survey groundwater reports, Massachusetts Department of Environmental Protection Zone II reports, and other Massachusetts-specific journal articles (a total of 23 sources).\One of the goals of this project was to understand current and projected future groundwater flooding risks across the state. To understand groundwater flooding risks, we developed a statewide three-dimensional groundwater flow model to simulate the water table elevation. The Hydrogeologic Atlas of Massachusetts compiles new datasets developed as input into the groundwater model, groundwater model simulation results, and other statewide map products created through this project. For further information regarding the methods of this study see Corkran et al. (2024), a report submitted to the Massachusetts Executive Office of Energy and Environmental Affairs.Suggested Citation:Corkran, D., Kirshen, A., Moran, B.J., Blin, N., King, R., Bresee, M., & Boutt, D. (2024). Massachusetts State-wide Groundwater Model and Flooding Risk Assessment 1.0. Report funded by the Massachusetts Executive Office of Energy and Environmental Affairs and published on the ResilientMass website.See full metadata and the map service.

This map includes shoreline change data for the state of Massachusetts hosted by the Massachusetts Office of Coastal Zone Management.The active data layer in this map is Massachusetts Shoreline Change Transect (1970-2014) with short-term shoreline change rates. To view long-term rates, open map in Map Viewer to turn on layer.The Massachusetts Office of Coastal Zone Management launched the Shoreline Change Project in 1989 to identify erosion-prone areas of the coast. The shoreline position and change rate are used to inform management decisions regarding the erosion of coastal resources. In 2001, a shoreline from 1994 was added to calculate both long- and short-term shoreline change rates along ocean-facing sections of the Massachusetts coast. In 2013, two oceanfront shorelines for Massachusetts were added using 2008-9 color aerial orthoimagery and 2007 topographic lidar datasets obtained from the National Oceanic and Atmospheric Administration's Ocean Service, Coastal Services Center. In 2018 two new mean high water (MHW) shorelines for Massachusetts were extracted from lidar collected between 2010 and 2014 (described below). 2018 addition shoreline 1The North Shore and South Coast uses 2010 lidar data collected by the U.S. Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise. The South Shore and Outer Cape uses 2011 lidar data collected by the U.S. Geological Survey's (USGS) National Geospatial Program Office. Nantucket and Martha’s Vineyard uses 2012 lidar data collected by the USACE (post Sandy)from a 2012 USACE Post Sandy Topographic lidar survey. 2018 addition shoreline 2The North Shore, Boston, South Shore, Cape Cod Bay, Outer Cape, South Cape, Nantucket, Martha’s Vineyard, and the South Coast (around Buzzards Bay to the Rhode Island Border) is from 2013-14 lidar data collected by the (USGS) Coastal and Marine Geology Program. This 2018 update of the rate of shoreline change in Massachusetts includes two types of rates. Some of the rates include a proxy-datum bias correction, this is indicated in the filename with “PDB”. The rates that do not account for this correction have “NB” in their file names. The proxy-datum bias is applied because in some areas a proxy shoreline (like a High Water Line shoreline) has a bias when compared to a datum shoreline (like a Mean High Water shoreline). In areas where it exists, this bias should be accounted for when calculating rates using a mix of proxy and datum shorelines. This issue is explained further in Ruggiero and List (2009) and in the process steps of the metadata associated with the rates. This release includes both long-term (~150 years) and short term (~30 years) rates. Files associated with the long-term rates have “LT” in their names, files associated with short-term rates have “ST” in their names.

The data in this map service is a polygon feature class (converted from a 100-meter resolution raster dataset) that uses the hydraulic conductivity fields from SURFGEO24K_K_POLY, water table elevation from the statewide groundwater flow model, and bedrock altitude to calculate aquifer yield and minimum, maximum, and average transmissivity in square feet per day. Transmissivity was calculated as hydraulic conductivity multiplied by aquifer thickness. Aquifer thickness was determined by the water table elevation minus bedrock altitude. Transmissivity cutoff values to characterize aquifer yield were from the MassGIS Aquifers layer (AQUIFERS_POLY).The Hydrogeologic Atlas of Massachusetts provides data on the hydraulic properties of the statewide surficial aquifers. The datasets were developed using surficial geology, bedrock altitude, a statewide groundwater flow model, and a compilation of hydraulic property data from U.S. Geological Survey groundwater reports, Massachusetts Department of Environmental Protection Zone II reports, and other Massachusetts-specific journal articles (a total of 23 sources).One of the goals of this project was to understand current and projected future groundwater flooding risks across the state. To understand groundwater flooding risks, we developed a statewide three-dimensional groundwater flow model to simulate the water table elevation. The Hydrogeologic Atlas of Massachusetts compiles new datasets developed as input into the groundwater model, groundwater model simulation results, and other statewide map products created through this project. For further information regarding the methods of this study see Corkran et al. (2024), a report submitted to the Massachusetts Executive Office of Energy and Environmental Affairs.Suggested Citation:Corkran, D., Kirshen, A., Moran, B.J., Blin, N., King, R., Bresee, M., & Boutt, D. (2024). Massachusetts State-wide Groundwater Model and Flooding Risk Assessment 1.0. Report funded by the Massachusetts Executive Office of Energy and Environmental Affairs and published on the ResilientMass website.See full metadata and the feature service.

This data set contains the sea floor topographic contours, sun-illuminated topographic imagery, and backscatter intensity generated from a multibeam sonar survey of the Stellwagen Bank National Marine Sanctuary region off Boston, Massachusetts, an area of approximately 1100 square nautical miles. The Stellwagen Bank NMS Mapping Project is designed to provide detailed maps of the Stellwagen Bank region's environments and habitats and the first complete multibeam topographic and sea floor characterization maps of a significant region of the shallow EEZ. Data were collected on four cruises over a two year period from the fall of 1994 to the fall of 1996. The surveys were conducted aboard the Candian Hydrographic Service vessel Frederick G. Creed, a SWATH (Small Waterplane Twin Hull) ship that surveys at speeds of 16 knots. The multibeam data were collected utilizing a Simrad Subsea EM 1000 Multibeam Echo Sounder (95 kHz) that is permanently installed in the hull of the Creed.

This data set comprises the Environmental Sensitivity Index (ESI) data for Massachusetts from 1980 to 2000. ESI data characterize estuarine environments and wildlife by their sensitivity to spilled oil. The ESI data include information for three main components: shoreline habitats, sensitive biological resources, and human-use resources. This atlas was developed to be utilized within desktop GIS systems and contains GIS files and related D-base files. Associated files include MOSS (Multiple Overlay Statistical System) export files, .PDF maps, and detailed user guides and metadata.

The political boundary datalayer is a polygon representation of town boundaries created from arcs developed from survey coordinates extracted from the 68-volume Harbor and Lands Commission Town Boundary Atlas for the 351 communities (cities and towns) in Massachusetts. The Atlas was published in the early 1900's and is maintained by the Survey Section of Massachusetts Highway Department. For communities with a coastal boundary, MassGIS has collaborated with Massachusetts Water Resources Authority and the Department of Environmental Protection to complete a 1:12000 scale coastline. The boundary for the coastline was defined as being the upland side of tidal flats and rocky inter-tidal zones. Note that the 351 communities are the official municipal names, not including "villages" or other sections of towns.This datalayer was created for the purposes of providing an up-to-date polygon version of the town boundaries for the 351 cities and towns of the Commonwealth of Massachusetts. The legislative intent for some boundaries could not be mapped. Boundaries where that is true are identified in the attribute information. This layer contains multi-part polygons, one for each municipality. The coastline on this layer has been generalized for small-scale cartography and faster display in web map services.See the layer metadata for details.

The Digital Surficial Geologic-GIS Map of Minuteman National Historical Site and Vicinity, Massachusetts is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (mima_surficial_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (mima_surficial_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (mima_geology.gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (mima_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (mima_surficial_geology_metadata_faq.pdf). Please read the mima_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: http://www.google.com/earth/index.html. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (mima_surficial_geology_metadata.txt or mima_surficial_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:50,000 and United States National Map Accuracy Standards features are within (horizontally) 25.4 meters or 83.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

GDP from health care and social assistance of Massachusetts jumped by 5.11% from 63,578.7 millions of current dollars in 2022Q4 to 66,826.0 millions of current dollars in 2023Q1. Since the 0.88% reduction in 2022Q2, GDP from health care and social assistance surged by 8.89% in 2023Q1. Current-dollar GDP (millions of current dollars)

The data in this tile service is a raster (100-meter resolution) that uses average transmissivity from SURFGEO24K_T_AY, topographic relief, and groundwater recharge to calculate the water table ratio. Positive values indicate that the region has a topography-controlled water table, and negative numbers indicate a recharge-controlled water table. For further methods see Gleeson et al. (2011).The Hydrogeologic Atlas of Massachusetts provides data on the hydraulic properties of the statewide surficial aquifers. The datasets were developed using surficial geology, bedrock altitude, a statewide groundwater flow model, and a compilation of hydraulic property data from U.S. Geological Survey groundwater reports, Massachusetts Department of Environmental Protection Zone II reports, and other Massachusetts-specific journal articles (a total of 23 sources).One of the goals of this project was to understand current and projected future groundwater flooding risks across the state. To understand groundwater flooding risks, we developed a statewide three-dimensional groundwater flow model to simulate the water table elevation. The Hydrogeologic Atlas of Massachusetts compiles new datasets developed as input into the groundwater model, groundwater model simulation results, and other statewide map products created through this project. For further information regarding the methods of this study see Corkran et al. (2024), a report submitted to the Massachusetts Executive Office of Energy and Environmental Affairs.Suggested Citation:Corkran, D., Kirshen, A., Moran, B.J., Blin, N., King, R., Bresee, M., & Boutt, D. (2024). Massachusetts State-wide Groundwater Model and Flooding Risk Assessment 1.0. Report funded by the Massachusetts Executive Office of Energy and Environmental Affairs and published on the ResilientMass website.See full metadata and map service.

Doctorate recipients of Massachusetts increased by 3.06% from 2,944 number in 2018 to 3,034 number in 2019. Since the 0.55% fall in 2017, doctorate recipients surged by 5.35% in 2019.

The U.S. Geological Survey and the University of Massachusetts at Amherst (UMass Amherst), in cooperation with the Massachusetts Department of Environmental Protection (MassDEP), began a series of studies in 2019 to develop a web-based statewide hydraulic modeling tool to provide preliminary culvert designs to support stream crossing replacement projects in Massachusetts. This Web Map Service (WMS) has been developed to query data from the hydraulic models at select stream crossing locations using the StreamStats web application for Massachusetts. The WMS contains stream crossing point locations with hydrology and hydraulic data tables and associated watershed polygons. These stream crossing locations were derived from the North Atlantic Aquatic Connectivity Collaborative data center (NAACC Data Center). Preliminary culvert designs for three-sided box, conspan arch, and a pipe culvert have been modeled using the U.S. Army Corps of Engineer’s Hydrologic Engineering Center’s River Analysis System (HEC-RAS) software with cross-sectional and channel geometry data derived from high-resolution light detection and ranging (lidar) Digital Elevation Models (DEM). The WMS layer provides the ability to generate reports in the StreamStats web application for Massachusetts at the stream crossing locations for site location information, preliminary culvert designs, flood flows, bankfull channel geometry, aquatic habitat and stream connectivity restoration potential, basin characteristics, and other select information.

The information on this map represents the overall feeder thermal hosting capacity as calculated at a point close to the substation, and does not account for all constraints that could impact interconnection costs.

The U.S. Geological Survey has conducted geologic mapping to characterize the sea floor offshore of Massachusetts. The mapping was carried out using a Simrad Subsea EM 1000 Multibeam Echo Sounder on the Frederick G. Creed on four cruises conducted between 1994 and 1998. The mapping was conducted in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and with support from the Canadian Hydrographic Service and the University of New Brunswick. The long-term goal of this mapping effort is to produce high-resolution geologic maps and a Geographic Information System (GIS) project that presents images and grids of bathymetry, shaded relief bathymetry, and backscatter intensity data from these surveys that will serve the needs of research, management and the public.

A GIS database of geologic units and structural features in Massachusetts, with lithology, age, data structure, and format written and arranged just like the other states.

Background and Data Limitations The Massachusetts 1830 map series represents a unique data source that depicts land cover and cultural features during the historical period of widespread land clearing for agricultural. To our knowledge, Massachusetts is the only state in the US where detailed land cover information was comprehensively mapped at such an early date. As a result, these maps provide unusual insight into land cover and cultural patterns in 19th century New England. However, as with any historical data, the limitations and appropriate uses of these data must be recognized: (1) These maps were originally developed by many different surveyors across the state, with varying levels of effort and accuracy. (2) It is apparent that original mapping did not follow consistent surveying or drafting protocols; for instance, no consistent minimum mapping unit was identified or used by different surveyors; as a result, whereas some maps depict only large forest blocks, others also depict small wooded areas, suggesting that numerous smaller woodlands may have gone unmapped in many towns. Surveyors also were apparently not consistent in what they mapped as ‘woodlands’: comparison with independently collected tax valuation data from the same time period indicates substantial lack of consistency among towns in the relative amounts of ‘woodlands’, ‘unimproved’ lands, and ‘unimproveable’ lands that were mapped as ‘woodlands’ on the 1830 maps. In some instances, the lack of consistent mapping protocols resulted in substantially different patterns of forest cover being depicted on maps from adjoining towns that may in fact have had relatively similar forest patterns or in woodlands that ‘end’ at a town boundary. (3) The degree to which these maps represent approximations of ‘primary’ woodlands (i.e., areas that were never cleared for agriculture during the historical period, but were generally logged for wood products) varies considerably from town to town, depending on whether agricultural land clearing peaked prior to, during, or substantially after 1830. (4) Despite our efforts to accurately geo-reference and digitize these maps, a variety of additional sources of error were introduced in converting the mapped information to electronic data files (see detailed methods below). Thus, we urge considerable caution in interpreting these maps. Despite these limitations, the 1830 maps present an incredible wealth of information about land cover patterns and cultural features during the early 19th century, a period that continues to exert strong influence on the natural and cultural landscapes of the region.

    Acknowledgements
    Financial support for this project was provided by the BioMap Project of the Massachusetts Natural Heritage and Endangered Species Program, the National Science Foundation, and the Andrew Mellon Foundation. This project is a contribution of the Harvard Forest Long Term Ecological Research Program.

This layer is sourced from maps.coast.noaa.gov.

This map service presents spatial information developed as part of the National Oceanic and Atmospheric Administration (NOAA) Office for Coastal Management’s Coastal Flood Exposure Mapper. The purpose of the online mapping tool is to provide coastal managers, planners, and stakeholders a preliminary look at exposures to coastal flooding hazards. The Mapper is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help communities initiate resilience planning efforts. Currently the extent of the Coastal Flood Exposure Mapper covers U.S. coastal areas along the Gulf of Mexico and Atlantic Ocean. NOAA provides the information “as-is” and shall incur no responsibility or liability as to the completeness or accuracy of this information. NOAA assumes no responsibility arising from the use of this information. For additional information, please contact the NOAA Office for Coastal Management (coastal.info@noaa.gov).

© NOAA Office for Coastal Management

The U.S. Geological Survey has conducted geologic mapping to characterize the sea floor offshore of Massachusetts. The mapping was carried out using a Simrad Subsea EM 1000 Multibeam Echo Sounder on the Frederick G. Creed on four cruises conducted between 1994 and 1998. The mapping was conducted in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and with support from the Canadian Hydrographic Service and the University of New Brunswick. The long-term goal of this mapping effort is to produce high-resolution geologic maps and a Geographic Information System (GIS) project that presents images and grids of bathymetry, shaded relief bathymetry, and backscatter intensity data from these surveys that will serve the needs of research, management and the public.

Mental health workforce availability of Massachusetts remained stable at 140 persons per mental health provider over the last 1 years.

Accurate data and maps of sea floor geology are important first steps toward protecting fish habitat, delineating marine resources, and assessing environmental changes due to natural or human impacts. To address these concerns the U.S. Geological Survey, in cooperation with the Massachusetts Office of Coastal Zone Management (CZM), comprehensively mapped the Cape Cod Bay sea floor to characterize the surface and shallow subsurface geologic framework. Geophysical data collected include swath bathymetry, backscatter, and seismic reflection profile data. Ground-truth data, including sediment samples, underwater video, and bottom photographs were also collected. This effort is part of a long-term collaboration between the USGS and the Commonwealth of Massachusetts to map the State’s waters, support research on the Quaternary evolution of coastal Massachusetts, the influence of sea-level change and sediment supply on coastal evolution, and efforts to understand the type, distribution, and quality of subtidal marine habitats. This collaboration produces high-resolution geologic maps and Geographic Information System (GIS) data that serve the needs of research, management and the public. Data collected as part of this mapping cooperative continue to be released in a series of USGS Open-File Reports and Data Releases (https://www.usgs.gov/centers/whcmsc/science/geologic-mapping-massachusetts-seafloor). This data release provides the geophysical and geologic sampling data collected in Cape Cod Bay during USGS Field Activities 2019-002-FA and 2019-034-FA in 2019.