The statistic shows the total population of Australia from 1980 to 2023, with projections up until 2030. In 2023, Australia had a total population of about 26.95 million people. Population of Australia Australia is among the ten largest countries in the world, in terms of area size, although its total population is low in relation to this. Much of Australia’s interior remains uninhabited, as the majority of Australians live in coastal metropolises and cities. Most of the population is of European descent (predominantly British), although there is a growing share of the population with Asian heritage; only a small percentage belongs to the indigenous Aboriginal population. Australia's year-on-year population growth is fairly high compared to most other economically and demographically advanced nations, due to comparatively high rates of natural increase and immigration. Living standards Standard of living is fairly high in Australia, which can be seen when looking at the Human Development Index, which ranks countries by their level of human development and living standards, such as their unemployment rate, literacy rate, or life expectancy at birth. Life expectancy of Australia’s population is quite high in international comparison, for example, Australia is also among the leading countries when it comes to this key factor. Economically speaking, Australia is also among the leading nations, with a steadily rising employment rate, an increasing gross domestic product (GDP) with a steady growth rate, and a relatively stable share in the global GDP.

This dataset contains estimates of the resident population and estimates of the components of population change as at 30 June for the years 2001-2021. The data is aggregated to the 2016 Australian Statistical Geography Standard (ASGS) Statistical Areas Level 2 (SA2). This data is sourced from the Australian Bureau of Statistics (Catalogue Number: 3218.0). For more information please visit the Regional population methodology. Notes: The population estimates in this issue are final for 2001 to 2016, revised for 2017 to 2020, and preliminary for 2021. Estimated resident population (ERP) is the official estimate of the Australian population, which links people to a place of usual residence within Australia. Usual residence within Australia refers to that address at which the person has lived or intends to live for six months or more in a given reference year. For the 30 June reference date, this refers to the calendar year around it. Estimated resident population is based on Census counts by place of usual residence (excluding short-term overseas visitors in Australia), with an allowance for Census net undercount, to which are added the estimated number of Australian residents temporarily overseas at the time of the Census. AURIN has ingested this dataset in its GeoPackage format.

Australia Population Density: People per Square Km data was reported at 3.382 Person/sq km in 2022. This records an increase from the previous number of 3.339 Person/sq km for 2021. Australia Population Density: People per Square Km data is updated yearly, averaging 2.263 Person/sq km from Dec 1961 (Median) to 2022, with 62 observations. The data reached an all-time high of 3.382 Person/sq km in 2022 and a record low of 1.365 Person/sq km in 1961. Australia Population Density: People per Square Km data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Australia – Table AU.World Bank.WDI: Population and Urbanization Statistics. Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.;Food and Agriculture Organization and World Bank population estimates.;Weighted average;

As of December 2023, the proportion of the Australian population that lived in New South Wales amounted to 31.3 percent. The Northern Territory had the least number of residents in the country, with less than one percent of the population residing there.

Actual value and historical data chart for Australia Population Density People Per Sq Km

The Population Health Area (PHA) data include totals for the Greater Capital City Statistical Areas/ Rest of States/NT, States/ Territories and Australia; and for the Statistical Areas Level 3 and Level 4. Attribution: Torrens University Australia

The total population in Australia was estimated at 27.4 million people in 2024, according to the latest census figures and projections from Trading Economics. This dataset provides - Australia Population - actual values, historical data, forecast, chart, statistics, economic calendar and news.

Rural population (% of total population) in Australia was reported at 13.25 % in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. Australia - Rural population - actual values, historical data, forecasts and projections were sourced from the World Bank on November of 2025.

In June 2022, it was estimated that around 7.3 percent of Australians were aged between 25 and 29, and the same applied to people aged between 30 and 34. All in all, about 55 percent of Australia’s population was aged 35 years or older as of June 2022. At the same time, the age distribution of the country also shows that the share of children under 14 years old was still higher than that of people over 65 years old. A breakdown of Australia’s population growth Australia is the sixth-largest country in the world, yet with a population of around 26 million inhabitants, it is only sparsely populated. Since the 1970s, the population growth of Australia has remained fairly constant. While there was a slight rise in the Australian death rate in 2022, the birth rate of the country decreased after a slight rise in the previous year. The fact that the birth rate is almost double the size of its death rate gives the country one of the highest natural population growth rates of any high-income country.
National distribution of the population Australia’s population is expected to surpass 28 million people by 2028. The majority of its inhabitants live in the major cities. The most populated states are New South Wales, Victoria, and Queensland. Together, they account for over 75 percent of the population in Australia.

Contains latest available estimates by age and sex of the resident populations of areas of Australia as at 30 June. These estimates are provided for Statistical Areas Level 2 - 4 (SA2s - SA4s), Greater Capital City Statistical Areas (GCCSAs), and states and territories of Australia according to the current edition of the Australian Statistical Geography Standard (ASGS). Estimates are also provided for Local Government Areas (LGAs).

Official population projections for: • South Australia and regions for 2016 to 2041 • Local government areas (LGAs) and Statistical Areas level 2 (SA2s) for 2016 to 2036. Users should familiarise themselves with the assumptions, qualifications and background information provided on the DPTI population projections webpage at http://www.dpti.sa.gov.au/planning/population in order to choose the projection that best suits their needs. Updated every 5 years.

These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and Local Government Areas (LGAs), and are projected out from a base population as at 30 June 2022, by age and sex. Projections are for 30 June 2023 to 2032, with results disaggregated by age and sex.

Method The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) within each age-sex cohort according to the specified fertility, mortality and overseas and internal migration assumptions. The projected usual resident population by single year of age and sex was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.

Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.

Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.

Projections – Local Government Areas The base population for each LGA is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. Projections for 30 June 2023 to 2032 were created by converting from the SA2-level population projections to LGAs by age and sex. This was done using an age-specific population correspondence, where the data for each year of the projection span were converted based on 2021 population shares across SA2s. The LGA and SA2 projections are congruous in aggregation as well as in isolation. Unlike the projections prepared at SA2 level, no LGA-specific projection assumptions were used.

Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts, but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations and very small age-sex cells, especially at older ages. While these projections are calculated at the single year of age level, small numbers, and fluctuations across individual ages in the base population and projection assumptions limit the reliability of SA2-level projections at single year of age level. These fluctuations reduce and reliability improves when the projection results are aggregated to broader age groups such as the five-year age bands in this product. For areas with small elderly populations, results aggregated to 65 and over are more reliable than for the individual age groups above 65. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all, however their (small) age/sex distributions may change slightly. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections by age and sex include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state age/sex totals, being applied to their original values. SA2s and LGAs in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.

Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics If you have questions or feedback about this web service, please email geography@abs.gov.au. To subscribe to updates about ABS web services and geospatial products, please complete this form. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Population Projections, Australia, 2022 (base)

Australia Population: Total data was reported at 26,658,948.000 Person in 2023. This records an increase from the previous number of 26,014,399.000 Person for 2022. Australia Population: Total data is updated yearly, averaging 17,381,335.500 Person from Dec 1960 (Median) to 2023, with 64 observations. The data reached an all-time high of 26,658,948.000 Person in 2023 and a record low of 10,276,477.000 Person in 1960. Australia Population: Total data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Australia – Table AU.World Bank.WDI: Population and Urbanization Statistics. Total population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship. The values shown are midyear estimates.;(1) United Nations Population Division. World Population Prospects: 2024 Revision; (2) Statistical databases and publications from national statistical offices; (3) Eurostat: Demographic Statistics; (4) United Nations Statistics Division. Population and Vital Statistics Report (various years).;Sum;Relevance to gender indicator: disaggregating the population composition by gender will help a country in projecting its demand for social services on a gender basis.

This dataset provides values for POPULATION reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

This dataset presents data on population and people available from the ABS Data by Region statistics. This release of Data by Region presents various data for 2011-2019 and Census of Population and Housing data for 2011 and 2016 and is based on the Statistical Area 4 (SA4) 2016 boundaries. The dataset includes information in the following specified areas of population and people: Estimated Resident Population, Working Age Population, Median Age, Births and Deaths, Population Density, Internal and Overseas Migration, Aboriginal and Torres Strait Islander people, Overseas Born Proportion, Religious Affiliation and Speaks language other than English.

Data by Region contains a standard set of data for each region type, depending on the availability of statistics for particular geographies. Data are sourced from a wide variety of collections, both ABS and non-ABS. When analysing these statistics, care needs to be taken as time periods, definitions, methodologies, scope and coverage can differ across collections. Where available, data have been presented as a time series - to enable users to assess changes over time. However, when looked at on a period to period basis, some series may sometimes appear volatile. When analysing the data, users are encouraged to consider the longer term behaviour of the series, where this extra information is available.

For more information please visit the Explanatory Notes.

AURIN has made the following changes to the original data:

• Spatially enabled the original data with the ABS Australian Statistical Geography Standard (ASGS) SA4 2016 dataset.

• Some data values in Data by Region have been randomly adjusted or suppressed to avoid the release of confidential details.

• Where data was not available, not available for publication, nil or rounded to zero in the original data, it has been set to null.

• Columns and rows that did not contain any values in the original data have been removed.

This dataset contains estimates of the resident population and estimates of the components of population change as at 30 June for the years 2001-2021. The data is aggregated to the 2021 Australian Statistical Geography Standard (ASGS) Local Government Areas (LGA).

This data is sourced from the Australian Bureau of Statistics (Catalogue Number: 3218.0).

For more information please visit the Regional population methodology.

Notes: The population estimates in this issue are final for 2001 to 2016, revised for 2017 to 2020, and preliminary for 2021. Estimated resident population (ERP) is the official estimate of the Australian population, which links people to a place of usual residence within Australia. Usual residence within Australia refers to that address at which the person has lived or intends to live for six months or more in a given reference year. For the 30 June reference date, this refers to the calendar year around it. Estimated resident population is based on Census counts by place of usual residence (excluding short-term overseas visitors in Australia), with an allowance for Census net undercount, to which are added the estimated number of Australian residents temporarily overseas at the time of the Census.

AURIN has ingested this dataset in its GeoPackage format.

Humans have been living on the continent of Australia (name derived from "Terra Australis"; Latin for "the southern land") for approximately 65,000 years, however population growth was relatively slow until the nineteenth century. Europeans had made some contact with Australia as early as 1606, however there was no significant attempt at settlement until the late eighteenth century. By 1800, the population of Australia was approximately 350,000 people, and the majority of these were Indigenous Australians. As colonization progressed the number of ethnic Europeans increased while the Australian Aboriginal population was decimated through conflict, smallpox and other diseases, with some communities being exterminated completely, such as Aboriginal Tasmanians. Mass migration from Britain and China After the loss of its American colonies in the 1780s, the British Empire looked to other parts of the globe to expand its sphere of influence. In Australia, the first colonies were established in Sydney, Tasmania and Western Australia. Many of these were penal colonies which became home to approximately 164,000 British and Irish convicts who were transported to Australia between 1788 and 1868. As the decades progressed, expansion into the interior intensified, and the entire country was claimed by Britain in 1826. Inland colonization led to further conflict between European settlers and indigenous Australians, which cost the lives of thousands of natives. Inward expansion also saw the discovery of many natural resources, and most notably led to the gold rushes of the 1850s, which attracted substantial numbers of Chinese migrants to Australia. This mass migration from non-European countries eventually led to some restrictive policies being introduced, culminating with the White Australia Policy of 1901, which cemented ethnic-European dominance in Australian politics and society. These policies were not retracted until the second half of the 1900s. Independent Australia Australia changed its status to a British dominion in 1901, and eventually became independent in 1931. Despite this, Australia has remained a part of the British Commonwealth, and Australian forces (ANZAC) fought with the British and their Allies in both World Wars, and were instrumental in campaigns such as Gallipoli in WWI, and the South West Pacific Theater in WWII. The aftermath of both wars had a significant impact on the Australian population, with approximately 90 thousand deaths in both world wars combined, as well as 15 thousand deaths as a result of the Spanish flu pandemic following WWI, although Australia experienced a significant baby boom following the Second World War. In the past fifty years, Australia has promoted immigration from all over the world, and now has one of the strongest economies and highest living standards in the world, with a population that has grown to over 25 million people in 2020.

Contains latest available estimates of the resident populations of areas of Australia as at 30 June in each year . These estimates are provided for Statistical Areas Level 2 - 4 (SA2s - SA4s), Greater Capital City Statistical Areas (GCCSAs), and states and territories of Australia according to the current edition of the Australian Statistical Geography Standard (ASGS). Estimates are also provided for Local Government Areas (LGAs), Significant Urban Areas, Remoteness Areas, and Commonwealth and State Electoral Divisions.

Statistical Area Level 1 (SA1)

Statistical Areas Level 1 (SA1s) are designed to maximise the geographic detail available for Census of Population and Housing data while maintaining confidentiality.

SA1s are built from whole Mesh Blocks and have a population between 200 and 800 people. In remote and regional areas they generally have smaller populations than those in urban areas. SA1s are designed to represent Aboriginal and Torres Strait Islander communities as accurately as possible, particularly in remote areas.

Using SA1s with Census data

Use SA1s to see how Census characteristics vary at a neighbourhood scale within larger areas such as Suburbs or Local Government Areas.

​

Australian Bureau of Statistics (Jul2021-Jun2026), Data services and APIs, ABS Website, accessed 25 July 2023.

https://www.abs.gov.au/website-privacy-copyright-and-disclaimer#copyright-and-creative-commons

As of June 2023, there were approximately 8.33 million residents in the New South Wales region in Australia. In comparison, there were around 252 thousand residents in the Northern Territory region.