On September 30, 2020, there were 17 new reported confirmed cases of COVID-19 in Australia. Australia's daily new confirmed coronavirus cases peaked on July 30 with 746 new cases on that day. This was considered to be the second wave of coronavirus infections in Australia, with the first wave peaking at the end of March at 460 cases before dropping to less than 20 cases per day throughout May and most of June.

 A second wave

Australia’s second wave of coronavirus found its epicenter in Melbourne, after over a month of recording low numbers of national daily cases. Despite being primarily focused within a single state, clusters of coronavirus cases in Victoria soon pushed the daily number of recorded cases over that of the first wave, with well over double the number of deaths. As a result, the Victorian Government once again increased lockdown measures to limit movement and social interaction. At the same time the other states and territories closed or restricted movement across borders, with some of the strictest border closures taking place in Western Australian.

 Is Australia entering into a recession?

After narrowly avoiding a recession during the global financial crisis, by September 2020 Australia had recorded two consecutive quarters of economic decline, hailing the country’s first recession since 1991. This did not necessarily come as a surprise for many Australians who had already witnessed a rising unemployment rate throughout the second quarter of 2020 alongside ongoing restrictions on retail and hospitality trading. However, thanks to welfare initiatives like JobKeeper and a government stimulus payment supplementing many household incomes, the economic situation could have been much worse at this point.

As of September 5, 2022, the number of male 20 to 29 year olds diagnosed with COVID-19 in Australia had reached around 23,164 cases per 100,000 people. At the time, people 70-79 years of age had the lowest share of confirmed cases across males and females.

As of November 25, 2022 the number of COVID-19 cases in the Australian state of Victoria was at 40,482 people per 100,000 of the population. Since mid-2021, uncontained outbreaks in NSW and Victoria caused the government to move away from its former 'Covid zero' approach.

The economic impact of lockdown measures

In March of 2020, one survey showed that over 70 percent of Australians expected the economic outlook in Australia to get worse in the next three months. For most industries this prediction was correct, with the worst hit industries being hospitality, tourism, and gyms and fitness. However, some businesses flourished under the shift in pandemic consumer behavior with food delivery services, homewares and online gambling showing significant increases in consumption.

Australia recorded 11299954 Coronavirus Cases since the epidemic began, according to the World Health Organization (WHO). In addition, Australia reported 20553 Coronavirus Deaths. This dataset includes a chart with historical data for Australia Coronavirus Cases.

From 20 October 2023, COVID-19 datasets will no longer be updated. Detailed information is available in the fortnightly NSW Respiratory Surveillance Report: https://www.health.nsw.gov.au/Infectious/covid-19/Pages/reports.aspx.
Latest national COVID-19 spread, vaccination and treatment metrics are available on the Australian Government Health website: https://www.health.gov.au/topics/covid-19/reporting?language=und

COVID-19 cases by notification date and postcode, local health district, and local government area. The dataset is updated weekly on Fridays.

The data is for confirmed COVID-19 cases only based on location of usual residence, not necessarily where the virus was contracted.

Case counts reported by NSW Health for a particular notification date may vary over time due to ongoing investigations and the outcome of cases under review thus this dataset and any historical data contained within is subject to change on a daily basis.

The underlying dataset was assessed to measure the risk of identifying an individual and the level of sensitivity of the information gained if it was known that an individual was in the dataset. The dataset was then treated to mitigate these risks, including suppressing and aggregating data.

This dataset does not include cases with missing location information.

Abstract

JHU Coronavirus COVID-19 Global Cases, by country

Documentation

PHS is updating the Coronavirus Global Cases dataset weekly, Monday, Wednesday and Friday from Cloud Marketplace.

This data comes from the data repository for the 2019 Novel Coronavirus Visual Dashboard operated by the Johns Hopkins University Center for Systems Science and Engineering (JHU CSSE). This database was created in response to the Coronavirus public health emergency to track reported cases in real-time. The data include the location and number of confirmed COVID-19 cases, deaths, and recoveries for all affected countries, aggregated at the appropriate province or state. It was developed to enable researchers, public health authorities and the general public to track the outbreak as it unfolds. Additional information is available in the blog post.

Visual Dashboard (desktop): https://www.arcgis.com/apps/opsdashboard/index.html#/bda7594740fd40299423467b48e9ecf6

Section 2

Included Data Sources are:

• World Health Organization (WHO): https://www.who.int/
• DXY.cn. Pneumonia. 2020. http://3g.dxy.cn/newh5/view/pneumonia.
• BNO News: https://bnonews.com/index.php/2020/02/the-latest-coronavirus-cases/
• National Health Commission of the People’s Republic of China (NHC): http://www.nhc.gov.cn/xcs/yqtb/list_gzbd.shtml
• China CDC (CCDC): http://weekly.chinacdc.cn/news/TrackingtheEpidemic.htm
• Hong Kong Department of Health: https://www.chp.gov.hk/en/features/102465.html
• Macau Government: https://www.ssm.gov.mo/portal/
• Taiwan CDC: https://sites.google.com/cdc.gov.tw/2019ncov/taiwan?authuser=0
• US CDC: https://www.cdc.gov/coronavirus/2019-ncov/index.html
• Government of Canada: https://www.canada.ca/en/public-health/services/diseases/coronavirus.html
• Australia Government Department of Health: https://www.health.gov.au/news/coronavirus-update-at-a-glance
• European Centre for Disease Prevention and Control (ECDC): https://www.ecdc.europa.eu/en/geographical-distribution-2019-ncov-cases
• Ministry of Health Singapore (MOH): https://www.moh.gov.sg/covid-19
• Italy Ministry of Health: http://www.salute.gov.it/nuovocoronavirus
• 1Point3Arces: https://coronavirus.1point3acres.com/en
• WorldoMeters: https://www.worldometers.info/coronavirus/

%3C!-- --%3E

Section 3

**Terms of Use: **

This GitHub repo and its contents herein, including all data, mapping, and analysis, copyright 2020 Johns Hopkins University, all rights reserved, is provided to the public strictly for educational and academic research purposes. The Website relies upon publicly available data from multiple sources, that do not always agree. The Johns Hopkins University hereby disclaims any and all representations and warranties with respect to the Website, including accuracy, fitness for use, and merchantability. Reliance on the Website for medical guidance or use of the Website in commerce is strictly prohibited.

Section 4

**U.S. county-level characteristics relevant to COVID-19 **

Chin, Kahn, Krieger, Buckee, Balsari and Kiang (forthcoming) show that counties differ significantly in biological, demographic and socioeconomic factors that are associated with COVID-19 vulnerability. A range of publicly available county-specific data identifying these key factors, guided by international experiences and consideration of epidemiological parameters of importance, have been combined by the authors and are available for use:

https://github.com/mkiang/county_preparedness/

This dataset provides values for CORONAVIRUS CASES reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

From 20 October 2023, COVID-19 datasets will no longer be updated. Detailed information is available in the fortnightly NSW Respiratory Surveillance Report: https://www.health.nsw.gov.au/Infectious/covid-19/Pages/reports.aspx.
Latest national COVID-19 spread, vaccination and treatment metrics are available on the Australian Government Health website: https://www.health.gov.au/topics/covid-19/reporting?language=und

COVID-19 cases by notification date and age range. Data is available from 29th of June 2021.

The data is for confirmed COVID-19 cases only based on location of usual residence, not necessarily where the virus was contracted.

The underlying dataset was assessed to measure the risk of identifying an individual and the level of sensitivity of the information gained if it was known that an individual was in the dataset. Age ranges have been combined to minimise these risks.

As at January 31, 2022 there had been a total of 2,580,386 COVID-19 cases confirmed in Australia. After maintaining a 'COVID zero' infection control policy from the beginning of the outbreak and much of 2021, subsequent outbreaks in the second half of 2021 saw the Australian government shift its policy away from trying to eradicate domestic cases of COVID-19 to a staged reopening of state and international boarders with infection control measures.

In past 24 hours, Australia, Australia-Oceania had 664 new cases, N/A deaths and 4,299 recoveries.

On March 10, 2023, the Johns Hopkins Coronavirus Resource Center ceased collecting and reporting of global COVID-19 data. For updated cases, deaths, and vaccine data please visit the following sources:Global: World Health Organization (WHO)U.S.: U.S. Centers for Disease Control and Prevention (CDC)For more information, visit the Johns Hopkins Coronavirus Resource Center.This feature layer contains the most up-to-date COVID-19 cases and latest trend plot. It covers China, Canada, Australia (at province/state level), and the rest of the world (at country level, represented by either the country centroids or their capitals)and the US at county-level. Data sources: WHO, CDC, ECDC, NHC, DXY, 1point3acres, Worldometers.info, BNO, state and national government health departments, and local media reports. . The China data is automatically updating at least once per hour, and non-China data is updating hourly. This layer is created and maintained by the Center for Systems Science and Engineering (CSSE) at the Johns Hopkins University. This feature layer is supported by Esri Living Atlas team and JHU Data Services. This layer is opened to the public and free to share. Contact us.

Australia’s first coronavirus case was discovered on January 25, 2020. The infected person was a man from the coronavirus epicenter, Wuhan, who had flown into Melbourne on the 19th of January. Although some of the first infections in Australia can be attributed to travelers from China, by March 17, infections attributed to people who had visited the United States and Italy had overtaken China.

Travel restrictions

With the rate of infection in China climbing steadily in early February 2020, the Australian government began to implement measures to slow the spread of the coronavirus. These measures involved social distancing and broad travel restrictions, including the closing of boarders to all foreign nationals arriving from China on February 1. Overall, the number of travelers moving through airports across Australia had already begun to drop noticeably and Chinese students were one of the largest groups to be affected. By March, well after the 2020 school year had begun, over 50 percent of Chinese university students with visas to study in Australia had not entered the country. This also added to economic concerns, with Chinese students representing just over 12 billion Australian dollars in education export income in 2019.

Cruise ships

During the COVID-19 pandemic a number of cruise ships were hit by the virus, which spread amongst passengers and staff in the closed environments. The Diamond Princess, which was quarantined in Yokohama, Japan, had around 180 Australians on board, of which at least a quarter contracted the coronavirus. The Ruby Princess was another cruise ship attributed to the spread of COVID-19 within Australia. On March 19, 2020, the ship docked in Sydney harbor and 2,700 passengers disembarked. By March 24 it was confirmed that 133 passengers had contracted COVID-19 on the Ruby Princess.

From 20 October 2023, COVID-19 datasets will no longer be updated. Detailed information is available in the fortnightly NSW Respiratory Surveillance Report: https://www.health.nsw.gov.au/Infectious/c…Show full descriptionFrom 20 October 2023, COVID-19 datasets will no longer be updated. Detailed information is available in the fortnightly NSW Respiratory Surveillance Report: https://www.health.nsw.gov.au/Infectious/covid-19/Pages/reports.aspx. Latest national COVID-19 spread, vaccination and treatment metrics are available on the Australian Government Health website: https://www.health.gov.au/topics/covid-19/reporting?language=und As of 10 February 2023, NSW Health will report only positive SARS-CoV-2 test results. Recent changes to the COVID-19 public health orders for COVID-19 means it is no longer necessary for laboratories to provide data on negative PCR test results, in line with other diseases. Positive COVID-19 results, through both PCR tests and notified rapid antigen test results, will continue to be reported. NSW Health uses a wide range of surveillance systems, including hospital data, sewage surveillance, and genomic sequencing, to closely monitor COVID-19 and inform its public health response. COVID-19 tests by date and postcode, local health district, and local government area. The dataset is updated weekly on Fridays. The data is for COVID-19 tests and is based on the Local Health District (LHD) and Local Government Area (LGA) of residence provided by the individual at time of testing. A surge in total number of people tested on a particular day may occur as the test results are updated in batches and new laboratories gain testing capacity. The underlying dataset was assessed to measure the risk of identifying an individual and the level of sensitivity of the information gained if it was known that an individual was in the dataset. The dataset was then treated to mitigate these risks, including suppressing and aggregating data. On 16 September 2021, NSW Health implemented a change in the way testing data is reported. We will discontinue publication of unit record test data file as the data will only be provided as an aggregated file The aggregated data file will only include negative tests. Positive tests (i.e. cases) will not be included. Please note the COVID-19 tests dataset does not include registered positive rapid antigen test (RAT) information.

On Octover 11, 2020 there were 31 people with COVID-19 that were being treated in hospitals across Australia. Over the period since April 2020 hospitalizations due to COVID-19 rose dramatically from late July after a period of relatively few hospitalizations in June. This corresponds with the second wave of coronavirus cases in the country, which was mostly concentrated in the state of Victoria.

For further information about the coronavirus (COVID-19) pandemic, please visit our dedicated Fact and Figures page.

This is the data for the 2019 Novel Coronavirus Visual Dashboard operated by the Johns Hopkins University Center for Systems Science and Engineering (JHU CSSE). Also, Supported by ESRI Living Atlas Team and the Johns Hopkins University Applied Physics Lab (JHU APL).Data SourcesWorld Health Organization (WHO): https://www.who.int/ DXY.cn. Pneumonia. 2020. http://3g.dxy.cn/newh5/view/pneumonia. BNO News: https://bnonews.com/index.php/2020/02/the-latest-coronavirus-cases/ National Health Commission of the People’s Republic of China (NHC): http://www.nhc.gov.cn/xcs/yqtb/list_gzbd.shtml China CDC (CCDC): http://weekly.chinacdc.cn/news/TrackingtheEpidemic.htm Hong Kong Department of Health: https://www.chp.gov.hk/en/features/102465.html Macau Government: https://www.ssm.gov.mo/portal/ Taiwan CDC: https://sites.google.com/cdc.gov.tw/2019ncov/taiwan?authuser=0 US CDC: https://www.cdc.gov/coronavirus/2019-ncov/index.html Government of Canada: https://www.canada.ca/en/public-health/services/diseases/coronavirus.html Australia Government Department of Health: https://www.health.gov.au/news/coronavirus-update-at-a-glance European Centre for Disease Prevention and Control (ECDC): https://www.ecdc.europa.eu/en/geographical-distribution-2019-ncov-casesMinistry of Health Singapore (MOH): https://www.moh.gov.sg/covid-19Italy Ministry of Health: http://www.salute.gov.it/nuovocoronavirus

On October 11, 2020 there was one person with COVID-19 who had been admitted to intensive care in Australia and none being treated on a ventalator. This staus is in stark contrast to the August 19 when a total of 52 people were in ICUs accross Australian, 34 of which were being ventilated.

For further information about the coronavirus (COVID-19) pandemic, please visit our dedicated Fact and Figures page.

Australian COVID-19 actual incidence data from January to December 2021 was used to calibrate our model.

WHO: COVID-2019: Number of Patients: Death: To-Date: Australia data was reported at 23,915.000 Person in 24 Dec 2023. This stayed constant from the previous number of 23,915.000 Person for 23 Dec 2023. WHO: COVID-2019: Number of Patients: Death: To-Date: Australia data is updated daily, averaging 2,674.500 Person from Jan 2020 (Median) to 24 Dec 2023, with 1430 observations. The data reached an all-time high of 23,915.000 Person in 24 Dec 2023 and a record low of 0.000 Person in 01 Mar 2020. WHO: COVID-2019: Number of Patients: Death: To-Date: Australia data remains active status in CEIC and is reported by World Health Organization. The data is categorized under High Frequency Database’s Disease Outbreaks – Table WHO.D002: World Health Organization: Coronavirus Disease 2019 (COVID-2019): by Country and Region (Discontinued). Due to some inclusions and exclusions of cases that are not properly reflected in WHO report, which are the result of the retrospective adjustments of national authorities, some current day “To-date” figures will not tally to the sum of previous day “To-date” cases and current day new reported cases. Figures with excluded cases are relatively lower compared to the previous day.

Project Tycho datasets contain case counts for reported disease conditions for countries around the world. The Project Tycho data curation team extracts these case counts from various reputable sources, typically from national or international health authorities, such as the US Centers for Disease Control or the World Health Organization. These original data sources include both open- and restricted-access sources. For restricted-access sources, the Project Tycho team has obtained permission for redistribution from data contributors. All datasets contain case count data that are identical to counts published in the original source and no counts have been modified in any way by the Project Tycho team, except for aggregation of individual case count data into daily counts when that was the best data available for a disease and location. The Project Tycho team has pre-processed datasets by adding new variables, such as standard disease and location identifiers, that improve data interpretability. We also formatted the data into a standard data format. All geographic locations at the country and admin1 level have been represented at the same geographic level as in the data source, provided an ISO code or codes could be identified, unless the data source specifies that the location is listed at an inaccurate geographical level. For more information about decisions made by the curation team, recommended data processing steps, and the data sources used, please see the README that is included in the dataset download ZIP file.

The dashboard contains COVID-19 cases, deaths, recovered persons, and tests in Australia as well as a global COVID-19 map. The Esri Australia COVID-19 Map features data compiled by Guardian Australia, which is sourced from state and territory government websites and media reports. The data is updated every hour.