This CAD (.dwg) package, (last updated September 25, 2024), contains all the layers within the Land and Property Information group. The City of Langley has compiled all the Land and Property Information layers in one AutoCAD (.dwg) file. Data is updated on a regular basis; however, lot sizes, legal descriptions and encumbrances must be confirmed at the Land Title Office.CAD layers:AddressAddress AnnotationCity BoundaryEasement AnnotationEasementsFolio AnnotationLegal AnnotationParcels

This dataset has been deprecated. Please use our 2017 Countywide Contours instead.These data comprise of one foot contours showing the elevation of Lake County, IL corresponding to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). These data were developed from LIDAR data obtained between April 16, 2007 and May 07, 2007, and further supplemented by break lines collected from aerial photography taken at the same time. The contours and the aerial photography meet National Map Accuracy Standards for a 1 inch = 100 foot product. The contours have been created to be cartographically pleasing, as such some generalization has been introduced as expected. The contours have been tested against the original LIDAR points and conforms to the American Society for Photogrammetry and Remote Sensing (ASPRS) Specifications and Standards Committee, 1990, ASPRS Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The vertical datum is the North American Vertical Datum of 1988. The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment. Contour data is used by county agencies to study drainage issues such as flooding and erosion. Customers interested in the actual LiDAR data may download it at no cost from the USGS Center for LiDAR Information Coordination and Knowledge. These files are tiled by PLSS section and grouped by township and format for easier download. Please note that this dataset is available in for GIS in Esri shapefile format as well as for CAD in AutoCAD DWG and MicroStation DGN. We are unable to provide any support for CAD users beyond providing the data.

Select Aggregate Planimetric CAD Vectors from set of 2001-2019 Community Profile AutoCAD files - Initial release version Oct 26, 2023This is an AGOL-hosted Feature Service - hence text point labels only display horizontallySee these related Services (circa Oct 2023):DCRA Community Profile Availability and Map Sheet Outlines with PDF Maps as downloadable attachmentsDCRA Community Profile Aerial Imagery (Community Hi-Res Scale)DCRA Community Profile Aerial Imagery (Community General Area Low-Res Scale)State of Alaska Maxar RGB Satellite ImageryHigh Level Documentation as a PowerPoint Presentation in PDF form

Map Tiles is a reference dataset used to identify the spatial location of DWG contour data delivered to TLCGIS by Merrick. The attributes contained in the PAGE field in Map Tiles can be used to reference the name of the the individual DWG contour files.The individual DWG contour files are bundled into 4 quadrants for Leon County: NE, NW, SE, & SW. You may download these quadrants to use in conjuction with the Map Tiles data.

The CAD and GIS printer market is projected to reach a value of XXX million by 2033, growing at a CAGR of XX% from 2025 to 2033. The growth of the market is primarily driven by the increasing demand for high-quality prints in various industries, including architecture, engineering, construction, and manufacturing. Additionally, the rising adoption of computer-aided design (CAD) and geographic information systems (GIS) software is further fueling the demand for specialized printers capable of handling complex designs and maps. The market for CAD and GIS printers is segmented based on application, type, and region. Major players in the market include Canon, Epson, Hewlett-Packard, Roland, Konica Minolta, Mimaki Engineering, Mutoh, and Ricoh. North America and Europe are expected to remain key regional markets, followed by Asia-Pacific. Emerging markets in Latin America, the Middle East, and Africa are also expected to contribute to the growth of the market in the coming years.

The GIS data maintained by HPPM includes information on buildings and grounds related to Harvard University. Our "standard" base layers are available to Harvard affiliates and their service providers (for example, architects) working on Harvard projects in AutoCAD DWG, ESRI SHP or File Geodatabase format. Additional datasets are sometimes available by special arrangement. http://home.hppm.harvard.edu/pages/gis-data-layers

Tallahassee - Leon County GIS maintained waterbodies data provided as .DWG format for CAD users.This dataset is exported from an ESRI Feature Class to DWG on a monthly basis. While a new .zip file containing the DWG is uploaded monthly, the underlying GIS data may have not been altered between updates.

Summary: Water Utilities, including mains, service connections, manholes, hydrants, valves, pressure zones, and feature annotations for detailsDisclaimer: The User acknowledges and agrees that the Data is provided by the City to the User for the User's convenience and reference, and that the City makes no guarantees, representations or warranties, whether express or implied, as to the Data or as to any results to be or intended to be achieved from use of the Data, including without limitation guarantees, representations or warranties as to the accuracy, quality or completeness of the Data, merchantability or fitness for use for any particular purpose, and the User hereby waives all guarantees, representations and warranties in respect of the Data, whether express, implied by statute or otherwise. The User hereby releases The City from, and hereby indemnifies and holds harmless The City from and against, any liability, obligation, costs (including without limitation legal costs), expenses, claims, actions, proceedings, damages and penalties to the User or any other person or legal entity resulting from or related to the use, disclosure or reproduction of or reliance on the Data.

Linn County, Iowa contours clipped to the approximate area of PLSS Township 85 Range 6. This dataset is in AutoCAD (.dwg) format.This dataset is updated as needed, and not on a regular basis.Additional ResourcesVisit Linn County, Iowa on the web.Visit Linn County, Iowa GIS on the web.Visit the Linn County, Iowa GIS portal. This site is updated as needed to reflect maps and apps of interest from various departments.Contact InformationQuestions? Contact the GIS Division by phone at 319.892.5250 or by email.

Subdivision Lots based off of the legal description recorded with the Commissioner of the Revenue. Subdivisions are enumerated in the lot-block-section system (plat system), which refers to specific parcels of land identified by a lot number or letter within a block, or subdivision plat, in which the lot is located.Subdivision Lots are maintained within the Parcel Feature and is dissolved out weekly. The Parcel feature is the geographic representation of cadastral records within the County as recorded in deeds and plats. The current parcel set is based off of the 1979 double circle maps by Wingate Appraisal & Mapping and digitized in the early 1990's. The data is continuously updated, as new land records become available. New parcels are added in a “best fit” methodology giving preference to the most current source. This feature is co-managed in AutoCAD and ArcMap. In Arc this polygon feature is part of an Editing topology along with our Zoning feature and our Administration feature. This prevents self-intersection and gaps, while ensuring complete coverage among the participating features.

The Parcels feature is the geographic representation of cadastre records within the County as recorded in deeds and plats. The current parcels set is based off of the 1979 double circle maps by Wingate Appraisal & Mapping and digitized in the early 1990s. The data is continuously updated, as new land records become available. New parcels are added in a “best fit” methodology giving preference to the most current source. This feature is co-managed in AutoCAD and ArcMap. In Arc this polygon feature is part of a Editing topology along with our Zoning feature and our Administration feature. This prevents self-intersection and gaps, while ensuring complete coverage amongst the participating features.

Limites des circonscriptions législatives du département de Haute-Savoie - 2015 Chaque député est élu dans une circonscription dont les limites sont fixées, à l'intérieur des départements, par le code électoral sur des bases démographiques : les circonscriptions doivent représenter un nombre comparable d'habitants afin de respecter le principe d'égalité devant le suffrage. La France compte 577 circonscriptions législatives Le département de Haute-Savoie, est constitué de six circonscriptions législatives.

The seamless, county-wide parcel layer was digitized from official Assessor Parcel (AP) Maps which were originally maintained on mylar sheets and/or maintained as individual Computer Aided Design (CAD) drawing files (e.g., DWG). The CRA office continues to maintain the official AP Maps in CAD drawings and Information Systems Department/Geographic Information Systems (ISD/GIS) staff apply updates from these maps to the seamless parcel base in the County’s Enterprise GIS. The seamless parcel layer is updated and published to the Internet on a monthly basis.The seamless parcel layer was developed from the source data using the general methodology outlined below. The mylar sheets were scanned and saved to standard image file format (e.g., TIFF). The individual scanned maps or CAD drawing files were imported into GIS software and geo-referenced to their corresponding real-world locations using high resolution orthophotography as control. The standard approach was to rescale and rotate the scanned drawing (or CAD file) to match the general location on the orthophotograph. Then, appropriate control points were selected to register and rectify features on the scanned map (or CAD drawing file) to the orthophotography. In the process, features in the scanned map (or CAD drawing file) were transformed to real-world coordinates, and line features were created using “heads-up digitizing” and stored in new GIS feature classes. Recommended industry best practices were followed to minimize root mean square (RMS) error in the transformation of the data, and to ensure the integrity of the overall pattern of each AP map relative to neighboring pages. Where available Coordinate Geometry (COGO) & survey data, tied to global positioning systems (GPS) coordinates, were also referenced and input to improve the fit and absolute location of each page. The vector lines were then assembled into a polygon features, with each polygon being assigned a unique identifier, the Assessor Parcel Number (APN). The APN field in the parcel table was joined to the corresponding APN field in the assessor property characteristics table extracted from the MPTS database to create the final parcel layer. The result is a seamless parcel land base, each parcel polygon coded with a unique APN, assembled from approximately 6,000 individual map page of varying scale and accuracy, but ensuring the correct topology of each feature within the whole (i.e., no gaps or overlaps). The accuracy and quality of the parcels varies depending on the source. See the fields RANK and DESCRIPTION fields below for information on the fit assessment for each source page. These data should be used only for general reference and planning purposes. It is important to note that while these data were generated from authoritative public records, and checked for quality assurance, they do not provide survey-quality spatial accuracy and should NOT be used to interpret the true location of individual property boundary lines. Please contact the Sonoma County CRA and/or a licensed land surveyor before making a business decision that involves official boundary descriptions.

City of Lethbridge street network and street names.

This data is intended for use in computer-aided design software applications such as AutoCAD and MicroStation.

File Type: DWG Refresh Frequency: Quarterly Last Update: November 16, 2021

Alaska Railroad centerline data compiled from a GPS survey by Mullikin Surveys in 2005. Data was delivered to MSB GIS by ARR as a series of AutoCAD dwg files that were merged into a single GDB format and then published as shapefile. MSB GIS added a couple of older abandoned centerlines in the Palmer area that are sometimes needed for maps.

Complete Cadastral dataset in CAD format. Consume this dataset if you wish to download the entire Cadastral dataset at once.

Zoning data are updated by the Planning department as needed, and copied to the Open Data Portal daily. Zoning data are maintained in AutoCAD and then transferred to GIS for VicMap and the Open Data Portal. The labels for the zoning data are placed specifically in AutoCAD, so we export them as a separate layer in order to keep that fine placement. The Zoning Boundary data includes these labels as attributes as well, they just won't be quite as well-aligned as these. For Zoning Boundary (polygon) data, see also: Zoning Boundary data.The "Last Updated" date shown on our Open Data Portal refers to the last time the data schema was modified in the portal, or any changes were made to this description. We update our data through automated scripts which does not trigger the "last updated" date to change.Note: Attributes represent each field in a dataset, and some fields will contain information such as ID numbers. As a result some visualizations on the tabs on our Open Data page will not be relevant.

For downloading additional formats including AutoCAD, File geodatabase, please click here

Linn County, Iowa contours clipped to the approximate area of PLSS Township 85 Range 7. This dataset is in AutoCAD (.dwg) format.This dataset is updated as needed, and not on a regular basis.Additional ResourcesVisit Linn County, Iowa on the web.Visit Linn County, Iowa GIS on the web.Visit the Linn County, Iowa GIS portal. This site is updated as needed to reflect maps and apps of interest from various departments.Contact InformationQuestions? Contact the GIS Division by phone at 319.892.5250 or by email.

Cad flooding data areas. This item contains data for possible flooding locations for web map https://dallasgis.maps.arcgis.com/home/item.html?id=7c921878167d488b8d88b7da45caae74This dataset is not currently being updated.