Legally defined Regional District polygons were drawn from metes and bounds descriptions as written in Letters Patent for Regional Districts in the province of British Columbia. In the event of a discrepancy in the data, the metes and bounds description will prevail. Although the boundaries were drawn based on the legal metes and bounds descriptions, they may differ from how regional districts and their member municipalities and electoral areas currently view and/or manage their boundaries. Where discrepancies are noted, the Ministry of Municipal Affairs (the custodian) enters into discussion with the local governments whose boundaries are affected. In order to effect a change to the boundary, Cabinet approval is required. This is done through an Order in Council (OIC). While discrepancies to administrative boundaries are being resolved, boundaries may be adjusted on an ongoing basis until the requested changes are completed. The OIC_YEAR and OIC_NUMBER fields indicate the year that the boundary was passed under OIC and its associated number. The AFFECTED_ADMIN_AREA_ABRVN identifies the administrative areas that are affected by the OIC. Please note that the Northern Rockies Regional Municipality appears to be a gap in the Regional District layer, but it is a municipality and can be found in the Municipalities Layer. A polygon dataset that includes all of the administrative areas currently in the Administrative Boundaries Management System (ABMS) is available here. A complimentary point dataset that defines the administrative areas is also available available here. Other individual datasets are available from the following records: https://catalogue.data.gov.bc.ca/dataset/municipalities-legally-defined-administrative-areas-of-bc https://catalogue.data.gov.bc.ca/dataset/electoral-areas-legally-defined-administrative-areas-of-bc https://catalogue.data.gov.bc.ca/dataset/province-of-british-columbia-legally-defined-administrative-areas-of-bc https://catalogue.data.gov.bc.ca/dataset/islands-trust-legally-defined-administrative-areas-of-bc https://catalogue.data.gov.bc.ca/dataset/local-trust-areas-legally-defined-administrative-areas-of-bc

This is a georeferenced raster image of a printed paper map of the Sorrento, British Columbia region (Sheet No. 082L14), published in 1958. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1958 and the information on the map is current as of 1951. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

The village of Topley is on the Canadian National railway, 285 miles west of Prince George and midway between Prince George and Prince Rupert. The area with which this report is immediately concerned stretches from Topley to the south, northwards about 12 miles; the width of the map-area is also 12 miles. The area was mapped geologically during the summer of 1928 with the aid of the topographic survey made during the previous year. This chapter is an an excerpt from the original document.

Local Health Area (LHA) boundaries; 2022 boundary configuration. The LHAs are a mutually exclusive and exhaustive classification of the land area in BC. LHAs are contiguous (land area is geographically adjacent) and fit within an existing geographical hierarchy structure, e.g., cannot violate higher-level geography boundaries such as the Health Service Delivery Areas (HSDA) and Health Authorities (HA).

The 'Aquatic Conservation NGO Map of BC' illustrates various community and citizen-science driven initiatives in British Columbia that are involved in the conservation of our waters, with a particular focus on non-for-profits. The map showcases to the viewer information about an organization, such as contact info and website link, thus enabling them to easily reach out or learn more. Using the Map:Pan and zoom around the map to investigate organizations in an area of interest. Alternatively, use the search menu in the top right of the map to look up a particular aquatic conservation non-governmental organization.Select a point in the map to reveal the information about the organization. If the point appears as a 'cluster', zoom in more to reveal the individual points contained in the cluster.Map Data Sources:The 'Aquatic Conservation NGO Map of BC' was made possible thanks to data available on the Fisheries and Oceans Canada Community Involvement Groups website, or that were provided by the PSF Community Salmon Program. To access dataset metadata or for data download, click here.Contact Us:If you have any questions regarding the map or wish to have your NGO organization featured within it, please contact us by clicking here.Disclaimer:The 'Aquatic Conservation NGO Map of BC' is not fully comprehensive of all non-governmental organizations and non-profits involved in aquatic conservation in British Columbia. The map mainly has a focus on organizations that are funded in part or in whole by the Pacific Salmon Foundation, and includes only organizations selected from the data sources mentioned above. There are many other NGOs and non-profits in BC contributing to the natural conservation of our province.

This is a georeferenced raster image of a printed paper map of the Colbourne Creek, British Columbia region (Sheet No. 093O02), published in 1960. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1960 and the information on the map is current as of 1954. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Jervis Inlet, British Columbia region (Sheet No. 092G13), published in 1957. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1957 and the information on the map is current as of 1952. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Bugaboo Creek, British Columbia region (Sheet No. 082K15), published in 1963. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1963 and the information on the map is current as of 1953. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This dataset contains spatial and attribute information for local and regional greenspaces in British Columbia. Local and regional greenspaces are municipal or regional district lands designated by local government agencies and managed for public enjoyment, ecosystem or wildlife values. Spatial boundaries were sourced from municipal and regional district web sites, which in some cases provide datasets under Open Government Licence, and in other cases, publicize parks and greenspaces on web maps or pdf maps. Boundaries were edge-matched to the ParcelMap BC cadastre. This spatial layer contains multipart polygons.

This is a georeferenced raster image of a printed paper map of the Schoen Lake, British Columbia region (Sheet No. 092L01), published in 1948. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1948 and the information on the map is current as of 1938. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This data layer is part of a collection of GIS data created for the Okanagan Mainstem Floodplain Mapping Project. Notes below apply to the entire project data set.***Download Size is 12.5 GBGeneral Notes1. Please refer to the Disclaimer further below.2. Please review the associated project reports before using the floodplain maps: Northwest Hydraulic Consultants Ltd. (NHC). 2020. ‘Okanagan Mainstem Floodplain Mapping Project’. Report prepared for the Okanagan Basin Water Board (OBWB). 31 March 2020. NHC project number 3004430. Northwest Hydraulic Consultants Ltd. (NHC). 2021. ‘Okanagan Mainstem Floodplain Mapping Project – Development of CGVD1928 Floodplain Mapping’. Letter report prepared for the Okanagan Basin Water Board (OBWB). 30 March 2021. NHC project number 3006034.Northwest Hydraulic Consultants Ltd. (NHC). 2022. ‘Supplemental to the Okanagan Mainstem Floodplain Mapping Project – Current Operations Flood Construction Levels for Okanagan and Wood-Kalamalka Lakes’. Report prepared for the Okanagan Basin Water Board (OBWB). Final. 16 August 2022. NHC project number 3006613.3. These floodplain mapping layers delineate flood inundation extents under the specific flood events. Tributaries are not included in mapping.4. The mapped inundation is based on the calculated water level. Freeboard, wind effects, and wave effects have been added to the calculated water level where noted.5. Where noted, a freeboard allowance of 0.6 m has been added to the calculated flood water level. It has been added to account for local variations in water level and uncertainty in the underlying data and modelling.6. Where noted, the FCL (or COFCL) included in lake mapping layers includes an allowance for wind setup and wave runup based on co-occurrence of the seasonal 200-year wind event. The wind and wave effects extend 40 m shoreward to delineate the expected limit of wave effects. Beyond this limit the FCL (or COFCL) is based on inundation of the flood event without wave effects. Wave effects have been calculated based on generalized shoreline profile and roughness for each shoreline reach. Site specific runup analysis by a Qualified Registrant may be warranted to refine the generalized wave effects shown, which could increase or decrease the FCL (or COFCL) by as much as a metre.7. Underlying hydraulic analysis assumes channel and shoreline geometry is stationary. Erosion, deposition, degradation, and aggradation are expected to occur and may alter actual observed flood levels and extents. Obstructions, such as log-jams, local storm water inflows or other land drainage, groundwater, or tributary flows may cause flood levels to exceed those indicated on the maps.8. The Okanagan floodplain is subject to persistent ponding due to poor drainage. Persistent ponding is not covered by the flood inundation mapping.9. For flood level maps (water level and inundation extents):a. Layers for each flood scenario describe inundation extents, water surface elevations, and depths.b. The calculated water level has been extended perpendicular to flow across the floodplain; thus mapping inundation of isolated areas regardless of likelihood of inundation; whether it be from dike failure, seepage, or local inflows. Distant isolated areas may be conservatively mapped as inundated. Site specific judgement by a Qualified Professional is required to determine validity of isolated inundation.c. Filtering was used to remove isolated areas smaller than 100 m2. Holes in the inundation extent with areas less than 100 m2 were also removed. Isolated areas larger than 100 m2 are included in GIS data layers and are shown on maps if they are within 40 metres of direct inundation or within 40 metres of other retained polygons.d. Okanagan Dam breach, dam overtopping, or overtopping and breaching of Penticton Beach were not modelled. Inundation downstream of the Okanagan Dam on the left bank floodplain is based on river modelling with the assumption that Okanagan Lake levels will not overtop Lakeshore Drive and adjacent high ground. For the design flood scenarios, inundation mapping on the right bank of the Okanagan River from the Okanagan Dam downstream to the Highway 97 bridge and Burnaby Avenue is based on additional lake and river modelling. For other flood scenarios, river and lake inundation has been mapped separately and has not been integrated on the right bank. Inundation mapping on the right bank is based on river modelling as far as the most upstream modelled river cross section.10. For flood hazard maps (depth and velocity):a. Layers describe flood water depths and velocities. Depths and velocities are based on the maximum values from three modelled scenarios: all dikes removed, left bank dikes removed, and right bank dikes removed. Depths do not include freeboard.b. All hazard layers were modelled with the same parameters and boundary conditions as the design flood.11. Flood modelling and mapping is based on a digital elevation model (DEM) with the following coordinate system and datum specifications: Universal Transverse Mercator Zone 11-N (UTM Zone 11-N), North American Datum 1983 Canadian Spatial Reference System epoch 2002.0 (NAD83 CSRS (2002.0)), Canadian Geodetic Vertical Datum 2013 (CGVD2013), Canadian Gravimetric Geoid model of 2013 (CGG2013). FCL values are presented on the maps in both CGVD2013 and CGVD1928 vertical datums. CGVD1928 values are based on the following specifications: NAD83 CSRS (2002.0), CGVD1928, Height Transformation version 2.0 epoch 1997 (HTv2.0 (1997)). COFCL and COFCL values are presented only in CGVD2013.12. The accuracy of simulated flood levels is limited by the reliability and extent of water level, flow, and climatic data. The accuracy of the floodplain extents is limited by the accuracy of the design flood flow, the hydraulic model, and the digital surface representation of local topography. Localized areas above or below the mapped inundation maybe generalized. Therefore, floodplain maps should be considered an administrative tool that indicates flood elevations and floodplain boundaries for a designated flood. A qualified professional is to be consulted for site-specific engineering analysis.13. Industry best practices were followed to generate the floodplain maps. However, actual flood levels and extents may vary from those shown. OBWB and NHC do not assume any liability for variations of flood levels and extents from that shown.Data Sources Design flood events are based on hydrologic modelling of the Okanagan River watershed. The hydraulic response is based on a combination of 1D and 2D numerical models developed by NHC using HEC-RAS software, and NHC SWAN models. The hydraulic models are calibrated to the 2017 flood event and validated to the 2018 flood event; due to limits on data availability the hydrologic model is calibrated using data from 1980-2010. The digital elevation model (DEM) used to develop the model and mapping is based on Lidar data collected from March to November 2018 and provided by Emergency Management BC (EMBC), channel survey conducted by WSP in March, April, and June 2019, and additional survey data. See accompanying report for details NHC (2020).DisclaimerThis document has been prepared by Northwest Hydraulic Consultants Ltd. for the benefit of Okanagan Basin Water Board, Regional District of North Okanagan, Regional District of Central Okanagan, Regional District of Okanagan-Similkameen, Okanagan Nation Alliance for specific application to the Okanagan Mainstem Floodplain Mapping Project, Okanagan Valley, British Columbia, Canada (Ellison, Wood, Kalamalka, Okanagan, Skaha, Vaseux, and Osoyoos lakes and Okanagan River from Okanagan Lake to Osoyoos Lake). The information and data contained herein represent Northwest Hydraulic Consultants Ltd. best professional judgment in light of the knowledge and information available to Northwest Hydraulic Consultants Ltd. at the time of preparation, and was prepared in accordance with generally accepted engineering practices.Except as required by law, this document and the information and data contained herein are to be treated as confidential and may be used and relied upon only by Okanagan Basin Water Board, Regional District of North Okanagan, Regional District of Central Okanagan, Regional District of Okanagan-Similkameen, Okanagan Nation Alliance, its officers and employees. Northwest Hydraulic Consultants Ltd. denies any liability whatsoever to other parties who may obtain access to this document for any injury, loss or damage suffered by such parties arising from their use of, or reliance upon, this report or any of its contents.Data Layer List and Descriptions<!--· River / Lake Model Boundary -River / Lake Model Boundary (NHC): Boundary between Okanagan River and Okanagan Lake modelling and mapping areas for design and flood mapping.Recommended Design Flood (gates open): Ellison, Skaha, Vaseux, and Osoyoos lakeso Lake Shoreline Flood Construction Level (FCL) Zone – Recommended Design Flood with Freeboard and Wave Effect (NHC): Zone defined based on approximate shoreline and the wave breaking boundary plus a buffer; FCLs defined by zone along shoreline; shoreline FCLs take precedence over lake inundation FCLs.o Lake Flood Construction Level (FCL) Zone (Inundation Extent) – Recommended Design Flood with Freeboard (NHC): Design flood inundation extent with freeboard. Design event varies by lake, plus wind setup, plus mid-century climate change; plus freeboard 0.6m.o Lake Inundation Extent – Recommended Design Flood without Freeboard (NHC): Design flood inundation extent without freeboard. Design event varies by lake, plus wind setup, plus mid-century climate change.o Depth Grids§ Ellison Lake Depth – Recommended Design without Freeboard (NHC): ELLISON LAKE: 200-YEAR MID-CENTURY. Design flood depth

This is a georeferenced raster image of a printed paper map of the Moberly Lake, British Columbia region (Sheet No. 093P13), published in 1958. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1958 and the information on the map is current as of . Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Jesmond, British Columbia region (Sheet No. 092P05), published in 1967. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1967 and the information on the map is current as of 1962. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

The BC College Region Boundaries are administrative areas for Colleges within the province of BC. They are generally named for the largest university/college in the region.

This is a georeferenced raster image of a printed paper map of the Marion Lake, British Columbia region (Sheet No. 094G03), published in 1966. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1966 and the information on the map is current as of 1960. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

Health Authority (HA) boundaries; 2022 boundary configuration. The HAs are a mutually exclusive and exhaustive classification of the land area in BC. HAs are contiguous (land area is geographically adjacent) and fit within an existing geographical hierarchy, e.g., cannot violate lower-level geography boundaries such as the Health Service Delivery Areas (HSDA) and Local Health Area (LHA).

As sea level continues to rise due to the effects of climate change, the Strait of Georgia coastline is predicted to have increased inundation near coastal areas. This non-interactive map showcases three datasets: Potential year 2100 coastal floodplain areas; based on approximate flood construction levels and incorporating sea level rise (more information available here).Shoreline sensitivity to sea level rise; ratings were developed using an existing biogeographic land classification dataset (Broad Ecosystem Inventory), and previously rated sensitivity of coastal and marine feature classes (ShoreZone) that were modified to account for the effects of slope, exposure and sediment mobility (more information available here).Predicted coastal flood inundation for Victoria Inner Harbour modeled as part of the Capital Regional District Regional Coastal Flood Inundation Project.Combined, these layers show coastal segments predicted to be particularly at risk due to the impacts of climate change.

The map title is British Columbia. Tactile map scale. 1.8 centimetres = 100 kilometres North arrow pointing to the top of the page. Borders of the province of British Columbia, shown as dashed and solid lines. The Pacific Ocean, shown with a wavy symbol to indicate water. A circle and the city name to show the location of Prince George and Vancouver. A filled star and the city name to show the location the capital of the province, Victoria. Text labels for the Pacific Ocean and Fraser River. The word lake is abbreviated as L. The abbreviation "AB" to indicate the province of Alberta. The abbreviation "YT" to indicate the Yukon Territory. The abbreviation "NT" to indicate the Northwest Territories. The abbreviation "USA" to indicate the neighbouring country, The United States of America. The abbreviation "AK" to indicate the State of Alaska. Tactile maps are designed with Braille, large text, and raised features for visually impaired and low vision users. The Tactile Maps of Canada collection includes: (a) Maps for Education: tactile maps showing the general geography of Canada, including the Tactile Atlas of Canada (maps of the provinces and territories showing political boundaries, lakes, rivers and major cities), and the Thematic Tactile Atlas of Canada (maps showing climatic regions, relief, forest types, physiographic regions, rock types, soil types, and vegetation). (b) Maps for Mobility: to help visually impaired persons navigate spaces and routes in major cities by providing information about streets, buildings and other features of a travel route in the downtown area of a city. (c) Maps for Transportation and Tourism: to assist visually impaired persons in planning travel to new destinations in Canada, showing how to get to a city, and streets in the downtown area.

Regional Planning Districts for Baltimore County.

This is a georeferenced raster image of a printed paper map of the Endako, British Columbia region (Sheet No. 093K03), published in 1961. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1961 and the information on the map is current as of 1955. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.