Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis map was derived from the Belmont County Soil Survey using prime farmland map units from the statewide list maintained by the USDA, Natural Resources Conservation Service in combination with land use/ land cover interpreted by the Remote Sensing Unit of The Ohio Department of Natural Resources.

Prime farmland is usually defined as land best suited and available for producing food, feed, forage, fiber, and oilseed crops. It has the soil quality, growing season, and moisture supply needed to produce sustained high yields economically when treated and managed, including water management, according to modern farming methods.

Soils used in this analysis were digitized from the paper original soil survey sheets. These sheets were taped together to form an area covering each of the USGS 7.5 minute quadrangle maps in the county. The areas for each quadrangle were then digitized using run-length encoding technique sampling along horizontal lines which represented the midline of cells with a height of 250 feet. The measurement increment along these lines was one decafoot (10 feet). The quadrangle files were then merged into a county file which has subsequently been converted to Arc/Info format.

The user should bear in mind that this coverage is only an approximation of the soil survey and should not be used for site specific analysis.

Additional details of the digitizing process are available upon request.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

The table below showcases the 10th, 25th, 50th, 75th, and 90th percentiles of property tax rates for each zip code in Bethesda, Ohio. It's important to understand that tax rates can vary greatly and can change yearly.

The table below showcases the 10th, 25th, 50th, 75th, and 90th percentiles of assessed property values for each zip code in Bethesda, Ohio. It's important to understand that assessed property values can vary greatly and can change yearly.

Download .zipThe Ohio Wetlands Inventory is based on analysis of satellite data by Bruce R. Motsch and Gary M. Schaal and is intended solely as an indicator of wetland sites for which field review should be conducted. The satellite data reflect conditions during the specific year and season the data was acquired and all wetlands may not be indicated. Statistics generated from the inventory are intended solely as an approximation.

The Ohio Wetlands Inventory for Belmont County was produced from May 1987 Landsat Thematic mapper data (cell size 30 meters by 30 meters) using ERDAS Image processing software. The raster data has been converted to ARC/INFO format and exported to an interchange file.

The data was originally georeferenced to UTM zone 17 coordinates NAD 27 and is also available in this coordinate system in ERDAS Imagine format.

The class of woods on hydric soils, wet meadow and farmed wetland fall on hydric soils when digital soils data is available for the county.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

The table below showcases the 10th, 25th, 50th, 75th, and 90th percentiles of actual property tax paid on residential properties for each zip code in Maynard, Ohio. It's important to understand that property tax rates can vary greatly and can change yearly.

The table below showcases the 10th, 25th, 50th, 75th, and 90th percentiles of assessed property values for each zip code in Fairpoint, Ohio. It's important to understand that assessed property values can vary greatly and can change yearly.

Download .zipThis map was derived from the Belmont County Soil Survey.

This analysis of soil slippage combines four types of information : percent of slope, soil type, shrink-swell potential (2nd horizon), and permeability rate. Percent of slope and soil type are more likely to contribute slippage than the other factors. Strip mine spoil soils have a greater susceptibility to slippage due to site disruption from mining activities. They are variable and possibly unstable.

Soils used in this analysis were digitized from the paper original soil survey sheets. These sheets were taped together to form an area covering each of the USGS 7.5 minute quadrangle maps in the county. The areas for each quadrangle were then digitized using run-length encoding technique sampling along horizontal lines which represented the midline of cells with a height of 250 feet. The measurement increment along these lines was one decafoot (10 feet). The quadrangle files were then merged into a county file which has subsequently been converted to Arc/Info format.

The user should bear in mind that this coverage is only an approximation of the soil survey and the resulting analysis should not be used to substitute for site specific investigation.

Additional details of the digitizing process are available upon request.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

The table below showcases the 10th, 25th, 50th, 75th, and 90th percentiles of actual property tax paid on residential properties for each zip code in Bethesda, Ohio. It's important to understand that property tax rates can vary greatly and can change yearly.

The table below showcases the 10th, 25th, 50th, 75th, and 90th percentiles of actual property tax paid on residential properties for each zip code in Fairpoint, Ohio. It's important to understand that property tax rates can vary greatly and can change yearly.

Download .zipSoils were categorized by the Belmont County Office of the US Dept of Agriculture, Natural Resources Conservation Service. Important farmlands are soils with 8-15% slopes. Farming on these lands may require more intensive soil management practices due to the hazard of erosion on the steeper slopes. Since they are more extensive than prime farmland, they are important to the agricultural economy of the county.

This map is not meant to substitute for an onsite investigation.

Soils used in this analysis were digitized from the paper original soil survey sheets. These sheets were taped together to form an area covering each of the USGS 7.5 minute quadrangle maps in the county. The areas for each quadrangle were then digitized using run-length encoding technique sampling along horizontal lines which represented the midline of cells with a height of 250 feet. The measurement increment along these lines was one decafoot (10 feet). The quadrangle files were then merged into a county file which has subsequently been converted to Arc/Info format.

The user should bear in mind that this coverage is only an approximation of the soil survey and should not be used for site specific analysis.

Additional details of the digitizing process are available upon request.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

The United States Public Land Survey (PLS) divided land into one square mile units, termed sections. Surveyors used trees to locate section corners and other locations of interest (witness trees). As a result, a systematic ecological dataset was produced with regular sampling over a large region of the United States, beginning in Ohio in 1786 and continuing westward.
We digitized and georeferenced archival hand drawn maps of these witness trees for 27 counties in Ohio. This dataset consists of a GIS point shapefile with 11,925 points located at section corners, recording 26,028 trees (up to four trees could be recorded at each corner). We retain species names given on each archival map key, resulting in 70 unique species common names. PLS records were obtained from hand-drawn archival maps of original witness trees produced by researchers at The Ohio State University in the 1960’s. Scans of these maps are archived as “The Edgar Nelson Transeau Ohio Vegetation Survey” at The Ohio State University: http://hdl.handle.net/1811/64106.
The 27 counties are: Adams, Allen, Auglaize, Belmont, Brown, Darke, Defiance, Gallia, Guernsey, Hancock, Lawrence, Lucas, Mercer, Miami, Monroe, Montgomery, Morgan, Noble, Ottawa, Paulding, Pike, Putnam, Scioto, Seneca, Shelby, Williams, Wyandot. Coordinate Reference System: North American Datum 1983 (NAD83). This material is based upon work supported by the National Science Foundation under grants #DEB-1241874, 1241868, 1241870, 1241851, 1241891, 1241846, 1241856, 1241930.

The table below showcases the 10th, 25th, 50th, 75th, and 90th percentiles of assessed property values for each zip code in Maynard, Ohio. It's important to understand that assessed property values can vary greatly and can change yearly.

Download .zipThe A Law Coal Permit Maps county coverage sets were developed using the original mine maps for coal mining and reclamation permits issued under Ohio law from approximately 1966 through 1973. Approximately 1111 A-Permits were issued during this time period, however, only 350 records could be located and captured at this time. The Division of Mineral Resources Management will continue to search for missing A permit archival records as resources allow; additional A permit data may be added to this existing coverage in the future.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and sometimes did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The A law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary and affected boundary and associated attributes. When available, test hole locations and associated attributes were also captured. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Subdivision Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet or NAD_1983_StatePlane_Ohio_North_FIPS_3401_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of three data files for the permit area, affected area, and test hole locations. For example, the coverage for Harrison County includes:

harrison_a_permitted (Harrison County, A-permit area polygons) harrison_a _affected (Harrison County, A-permit affected area polygons) harrison_testholes_a (Harrison County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

The LiDAR_Data_Download script looks at the URL that contains your county or municipality data, collects all of the URLs ,and downloads each file. The program utilizes threading and in turn uses the multiple processors of your pc to download several items at the same time, it will take several hours. What you will need to do is:1. Go to https://gis1.oit.ohio.gov/ZIPARCHIVES_III/ELEVATION/3DEP/LIDAR/ in a browser find the link for your data, right click it and select 'Copy link address'2. Go to line 23 in the program and paste the hyperlink between the quotes of the url variable replacing the text 'Paste Hyperlink Here'3. Update the savePath variable on line 38, to where on your system you'd like the data saved. When I did this for Belmont County the resulting folder ended up being over 350 GB, so make sure you have sufficient hard drive space. Comments in the code should guide you through the process. I wrote & ran this in Python 3.12, but any version of Python 3 should work.Submitted By: Anthony Atkins

Download .zipThe B Law Coal Permit Maps county coverage sets were developed using the original mine maps for coal mining and reclamation permits issued under Ohio law from 1973 through 1976. Approximately 1285 B-Permits were issued during this time period, however, only approximately 414 records could be located and captured at this time. The Division of Mineral Resources Management will continue to search for missing B permit archival records as resources allow; additional B permit data may be added to this existing coverage in the future.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and sometimes did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The B law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Subdivision Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of three data files for the permit area, affected area, and test hole locations. For example, the coverage for Belmont County includes:

belmont_b_permitted (Belmont County, B-permit area polygons) belmont_b _affected (Belmont County, B-permit affected area polygons) belmont_testholes_b (Belmont County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThe B Law Coal Permit Maps county coverage sets were developed using the original mine maps for coal mining and reclamation permits issued under Ohio law from 1973 through 1976. Approximately 1285 B-Permits were issued during this time period, however, only approximately 414 records could be located and captured at this time. The Division of Mineral Resources Management will continue to search for missing B permit archival records as resources allow; additional B permit data may be added to this existing coverage in the future.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and sometimes did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The B law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Subdivision Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of three data files for the permit area, affected area, and test hole locations. For example, the coverage for Belmont County includes:

belmont_b_permitted (Belmont County, B-permit area polygons) belmont_b _affected (Belmont County, B-permit affected area polygons) belmont_testholes_b (Belmont County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThe B Law Coal Permit Maps county coverage sets were developed using the original mine maps for coal mining and reclamation permits issued under Ohio law from 1973 through 1976. Approximately 1285 B-Permits were issued during this time period, however, only approximately 414 records could be located and captured at this time. The Division of Mineral Resources Management will continue to search for missing B permit archival records as resources allow; additional B permit data may be added to this existing coverage in the future.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and sometimes did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The B law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Subdivision Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of three data files for the permit area, affected area, and test hole locations. For example, the coverage for Belmont County includes:

belmont_b_permitted (Belmont County, B-permit area polygons) belmont_b _affected (Belmont County, B-permit affected area polygons) belmont_testholes_b (Belmont County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThe B Law Coal Permit Maps county coverage sets were developed using the original mine maps for coal mining and reclamation permits issued under Ohio law from 1973 through 1976. Approximately 1285 B-Permits were issued during this time period, however, only approximately 414 records could be located and captured at this time. The Division of Mineral Resources Management will continue to search for missing B permit archival records as resources allow; additional B permit data may be added to this existing coverage in the future.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and sometimes did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The B law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Subdivision Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of three data files for the permit area, affected area, and test hole locations. For example, the coverage for Belmont County includes:

belmont_b_permitted (Belmont County, B-permit area polygons) belmont_b _affected (Belmont County, B-permit affected area polygons) belmont_testholes_b (Belmont County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThe B Law Coal Permit Maps county coverage sets were developed using the original mine maps for coal mining and reclamation permits issued under Ohio law from 1973 through 1976. Approximately 1285 B-Permits were issued during this time period, however, only approximately 414 records could be located and captured at this time. The Division of Mineral Resources Management will continue to search for missing B permit archival records as resources allow; additional B permit data may be added to this existing coverage in the future.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and sometimes did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The B law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Subdivision Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of three data files for the permit area, affected area, and test hole locations. For example, the coverage for Belmont County includes:

belmont_b_permitted (Belmont County, B-permit area polygons) belmont_b _affected (Belmont County, B-permit affected area polygons) belmont_testholes_b (Belmont County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov