The statistic shows the 30 largest countries in the world by area. Russia is the largest country by far, with a total area of about 17 million square kilometers.

Population of Russia

Despite its large area, Russia - nowadays the largest country in the world - has a relatively small total population. However, its population is still rather large in numbers in comparison to those of other countries. In mid-2014, it was ranked ninth on a list of countries with the largest population, a ranking led by China with a population of over 1.37 billion people. In 2015, the estimated total population of Russia amounted to around 146 million people. The aforementioned low population density in Russia is a result of its vast landmass; in 2014, there were only around 8.78 inhabitants per square kilometer living in the country. Most of the Russian population lives in the nation’s capital and largest city, Moscow: In 2015, over 12 million people lived in the metropolis.

Hamamatsu was the largest major city in Japan based on city area in 2024, with a size of close to **** thousand square kilometers. It was followed by Shizuoka, with a size of more than **** square kilometers. Overconcentration in Tokyo Economic, political, and financial activity in Japan is heavily concentrated in Tokyo. With around **** million inhabitants, the metropolitan area of Tokyo is the largest urban conglomeration in the world. Most of Japan’s largest companies have their headquarters in Tokyo, and the region attracts many young people who move there to study or work. A breakdown of the net migration flow in Japan showed that the prefectures of Tokyo, Kanagawa, Saitama, and Chiba, all part of the Tokyo metropolitan area, attract the largest number of people. In contrast, the majority of prefectures, especially those located in rural parts of the country, lose a substantial part of their population every year. Demographic trend in rural regions The overconcentration of economic activity in Tokyo has an impact on the demographic situation in rural parts of the country. Japan’s population is shrinking and aging, and rural regions are particularly affected by this. Many young people leave their rural hometowns to seek better opportunities in urban parts of Japan, leaving behind an aging population. As a result, many rural communities in Japan struggle with depopulation and a notable share of municipalities are even threatened with disappearance in the coming decades.

Not many studies have documented climate and air quality changes of settlements at early stages of development. This is because high quality climate and air quality records are deficient for the periods of the early 18th century to mid 20th century when many U.S. cities were formed and grew. Dramatic landscape change induces substantial local climate change during the incipient stage of development. Rapid growth along the urban fringe in Phoenix, coupled with a fine-grained climate monitoring system, provide a unique opportunity to study the climate impacts of urban development as it unfolds. Generally, heat islands form, particularly at night, in proportion to city population size and morphological characteristics. Drier air is produced by replacement of the countryside's moist landscapes with dry, hot urbanized surfaces. Wind is increased due to turbulence induced by the built-up urban fabric and its morphology; although, depending on spatial densities of buildings on the land, wind may also decrease. Air quality conditions are worsened due to increased city emissions and surface disturbances. Depending on the diversity of microclimates in pre-existing rural landscapes and the land-use mosaic in cities, the introduction of settlements over time and space can increase or decrease the variety of microclimates within and near urban regions. These differences in microclimatic conditions can influence variations in health, ecological, architectural, economic, energy and water resources, and quality-of-life conditions in the city. Therefore, studying microclimatic conditions which change in the urban fringe over time and space is at the core of urban ecological goals as part of LTER aims. In analyzing Phoenix and Baltimore long-term rural/urban weather and climate stations, Brazel et al. (In progress) have discovered that long-term (i.e., 100 years) temperature changes do not correlate with populations changes in a linear manner, but rather in a third-order nonlinear response fashion. This nonlinear temporal change is consistent with the theories in boundary layer climatology that describe and explain the leading edge transition and energy balance theory. This pattern of urban vs. rural temperature response has been demonstrated in relation to spatial range of city sizes (using population data) for 305 rural vs. urban climate stations in the U.S. Our recent work on the two urban LTER sites has shown that a similar climate response pattern also occurs over time for climate stations that were initially located in rural locations have been overrun bu the urban fringe and subsequent urbanization (e.g., stations in Baltimore, Mesa, Phoenix, and Tempe). Lack of substantial numbers of weather and climate stations in cities has previously precluded small-scale analyses of geographic variations of urban climate, and the links to land-use change processes. With the advent of automated weather and climate station networks, remote-sensing technology, land-use history, and the focus on urban ecology, researchers can now analyze local climate responses as a function of the details of land-use change. Therefore, the basic research question of this study is: How does urban climate change over time and space at the place of maximum disturbance on the urban fringe? Hypotheses 1. Based on the leading edge theory of boundary layer climate change, largest changes should occur during the period of peak development of the land when land is being rapidly transformed from open desert and agriculture to residential, commercial, and industrial uses. 2. One would expect to observe, on average and on a temporal basis (several years), nonlinear temperature and humidity alterations across the station network at varying levels of urban development. 3. Based on past research on urban climate, one would expect to see in areas of the urban fringe, rapid changes in temperature (increases at night particularly), humidity (decreases in areas from agriculture to urban; increases from desert to urban), and wind speed (increases due to urban heating). 4. Changes of the surface climate on the urban fringe are expected to be altered as a function of various energy, moisture, and momentum control parameters, such as albedo, surface moisture, aerodynamic surface roughness, and thermal admittance. These parameters relate directly to population and land-use change (Lougeay et al. 1996).

In 2023, the total land area of the Guangdong - Hong Kong - Macao Greater Bay Area cities amounted to around ****** square kilometers. The land area of Zhaoqing alone was nearly ****** square kilometers, making it the largest city by area in the region. In terms of population size, however, Zhaoqing is one of the smaller cities in the Greater Bay Area.

Population in largest city in South Africa was reported at 6324351 in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. South Africa - Population in largest city - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

https://data.heatonresearch.com/images/wustl/kaggle/city-size/orbit-107.jpg" alt="Virtual City"> There are many different ways that engineers measure cities. What is the population? What is the total land area occupied by the city. In this exercise, we will see if you can create a model to predict the square feet contained in various virtual cities.

You are provided with images looking towards the city center. Each image is 512x512, compressed with JPEG. The following sample image shows a typical view of a virtual city. You can see towers of a variety of sizes and colors.

https://data.heatonresearch.com/images/wustl/kaggle/city-size/2.jpg" alt="Typical City View">

Not all views of the city will be the same. The following view looks at a city much closer up; however, results in some cropping of important detail.

https://data.heatonresearch.com/images/wustl/kaggle/city-size/10.jpg" alt="Up Close">

Some of the images will show you the city from somewhat above. Here you can see the city roads more clearly. https://data.heatonresearch.com/images/wustl/kaggle/city-size/321.jpg" alt="Above the City">

Some cities are very small.

https://data.heatonresearch.com/images/wustl/kaggle/city-size/350.jpg" alt="Small City">

Other cities are larger.

https://data.heatonresearch.com/images/wustl/kaggle/city-size/947.jpg" alt="Large City">

In 2025, Moscow was the largest city in Europe with an estimated urban agglomeration of 12.74 million people. The French capital, Paris, was the second largest city in 2025 at 11.35 million, followed by the capitals of the United Kingdom and Spain, with London at 9.84 million and Madrid at 6.81 million people. Istanbul, which would otherwise be the largest city in Europe in 2025, is excluded as it is only partially in Europe, with a sizeable part of its population living in Asia. Europe’s population is almost 750 million Since 1950, the population of Europe has increased by approximately 200 million people, increasing from 550 million to 750 million in these seventy years. Before the turn of the millennium, Europe was the second-most populated continent, before it was overtaken by Africa, which saw its population increase from 228 million in 1950 to 817 million by 2000. Asia has consistently had the largest population of the world’s continents and was estimated to have a population of 4.6 billion. Europe’s largest countries Including its territory in Asia, Russia is by far the largest country in the world, with a territory of around 17 million square kilometers, almost double that of the next largest country, Canada. Within Europe, Russia also has the continent's largest population at 145 million, followed by Germany at 83 million and the United Kingdom at almost 68 million. By contrast, Europe is also home to various micro-states such as San Marino, which has a population of just 30 thousand.

Description

This comprehensive dataset provides a wealth of information about all countries worldwide, covering a wide range of indicators and attributes. It encompasses demographic statistics, economic indicators, environmental factors, healthcare metrics, education statistics, and much more. With every country represented, this dataset offers a complete global perspective on various aspects of nations, enabling in-depth analyses and cross-country comparisons.

Key Features

Country: Name of the country.

Density (P/Km2): Population density measured in persons per square kilometer.

Abbreviation: Abbreviation or code representing the country.

Agricultural Land (%): Percentage of land area used for agricultural purposes.

Land Area (Km2): Total land area of the country in square kilometers.

Armed Forces Size: Size of the armed forces in the country.

Birth Rate: Number of births per 1,000 population per year.

Calling Code: International calling code for the country.

Capital/Major City: Name of the capital or major city.

CO2 Emissions: Carbon dioxide emissions in tons.

CPI: Consumer Price Index, a measure of inflation and purchasing power.

CPI Change (%): Percentage change in the Consumer Price Index compared to the previous year.

Currency_Code: Currency code used in the country.

Fertility Rate: Average number of children born to a woman during her lifetime.

Forested Area (%): Percentage of land area covered by forests.

Gasoline_Price: Price of gasoline per liter in local currency.

GDP: Gross Domestic Product, the total value of goods and services produced in the country.

Gross Primary Education Enrollment (%): Gross enrollment ratio for primary education.

Gross Tertiary Education Enrollment (%): Gross enrollment ratio for tertiary education.

Infant Mortality: Number of deaths per 1,000 live births before reaching one year of age.

Largest City: Name of the country's largest city.

Life Expectancy: Average number of years a newborn is expected to live.

Maternal Mortality Ratio: Number of maternal deaths per 100,000 live births.

Minimum Wage: Minimum wage level in local currency.

Official Language: Official language(s) spoken in the country.

Out of Pocket Health Expenditure (%): Percentage of total health expenditure paid out-of-pocket by individuals.

Physicians per Thousand: Number of physicians per thousand people.

Population: Total population of the country.

Population: Labor Force Participation (%): Percentage of the population that is part of the labor force.

Tax Revenue (%): Tax revenue as a percentage of GDP.

Total Tax Rate: Overall tax burden as a percentage of commercial profits.

Unemployment Rate: Percentage of the labor force that is unemployed.

Urban Population: Percentage of the population living in urban areas.

Latitude: Latitude coordinate of the country's location.

Longitude: Longitude coordinate of the country's location.

Potential Use Cases

Analyze population density and land area to study spatial distribution patterns.

Investigate the relationship between agricultural land and food security.

Examine carbon dioxide emissions and their impact on climate change.

Explore correlations between economic indicators such as GDP and various socio-economic factors.

Investigate educational enrollment rates and their implications for human capital development.

Analyze healthcare metrics such as infant mortality and life expectancy to assess overall well-being.

Study labor market dynamics through indicators such as labor force participation and unemployment rates.

Investigate the role of taxation and its impact on economic development.

Explore urbanization trends and their social and environmental consequences.

The Low Elevation Coastal Zone (LECZ) Urban-Rural Population Estimates consists of country-level estimates of urban, rural and total population and land area country-wide and in the LECZ, if applicable. Additionally, the data set provides the number of urban extents, their population and land area that intersect the LECZ, by city-size population classifications of less than 100,000, 100,000 to 500,000, 500,000 to 1,000,000, 1,000,000 to 5,000,000, and more than 5,000,000. All estimates are based on GRUMP Alpha data products. The LECZ was generated using SRTM Digital Elevation Model data and includes all land area that is contiguous with the coast and 10 meters or less in elevation. All grids used for population, land area, urban mask, and LECZ were of 30 arc-second (~1 km ) resolution. This data set is produced by the Columbia University Center for International Earth Science Information Network (CIESIN) in collaboration with the International Institute for Environment and Development (IIED).

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

United Kingdom UK: Population in Largest City: as % of Urban Population data was reported at 19.234 % in 2017. This records an increase from the previous number of 19.203 % for 2016. United Kingdom UK: Population in Largest City: as % of Urban Population data is updated yearly, averaging 18.336 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 19.939 % in 1960 and a record low of 17.256 % in 1973. United Kingdom UK: Population in Largest City: as % of Urban Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s UK – Table UK.World Bank: Population and Urbanization Statistics. Population in largest city is the percentage of a country's urban population living in that country's largest metropolitan area.; ; United Nations, World Urbanization Prospects.; Weighted Average;

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Nowhere has the scale and scope of urbanization been larger than in China over the last few decades. We analyze Chinese city development between the years 1996 and 2014 using data for the urbanized components of prefecture-level cities. We show that, despite much variability and fast economic and demographic change, China is undergoing transformations similar to the historical trajectory of other urban systems. We also show that the distinguishing signs of urban economies—superlinear scaling of agglomeration effects in economic productivity and economies of scale in land use—also characterize Chinese cities. We then analyze the structure of economic change in Chinese cities using a variety of metrics, characterizing employment, firms and households. Population size estimates remain a major challenge for Chinese cities, as official numbers are often reported based on the Hukou registration system. We use the information in the residuals to scaling relations for economic quantities to predict actual resident population and show that these estimates agree well with data for a subset of cities for which counts of total resident population exist. We conclude with a list of issues that must be better understood and measured to make sense of present urban development trajectories in China.

Mexico population density for 2022 was 66.16, a 0.76% increase from 2021.

<ul style='margin-top:20px;'>

<li>Mexico population density for 2021 was <strong>65.66</strong>, a <strong>0.67% increase</strong> from 2020.</li>
<li>Mexico population density for 2020 was <strong>65.23</strong>, a <strong>0.82% increase</strong> from 2019.</li>
<li>Mexico population density for 2019 was <strong>64.69</strong>, a <strong>0.95% increase</strong> from 2018.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

Rome is the most populous city in Italy. With 2.75 million inhabitants, the capital of the country put ahead Milan and Naples. Compared to the number of citizens in 2012, the resident population of Rome increased by over 140,000 individuals. Regional data Rome is located in the center of Italy in the Lazio region. Lazio is the second-largest region in terms of population size after Lombardy. In 2024, the region counts roughly 5.7 million inhabitants, whereas Lombardy has over ten million individuals. The third-largest region is Campania, with 5.6 million people. Naples, the major center of Campania, has around 910,000 inhabitants at the beginning of 2024. Nevertheless, this city was, back in the 19th century, one of the largest cities in Western Europe. Tourism in Rome The Eternal City is also the main tourist destination in Italy and was the eighth most-visited city in Europe. The largest groups of international visitors in Rome came from the United States of America, Japan, and the United Kingdom. Every year, more and more tourists also enjoy the best-known tourist attractions in Rome, like the Colosseum, the Roman Forum, and the Palatine Hill, which together recorded almost ten million visitors in 2022.

The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people.When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses.State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.Informing Worcester is the City of Worcester's open data portal where interested parties can obtain public information at no cost.

Based on the land economic density of 892 town units, the spatial pattern of the land economic density in Zhejiang Province is analyzed using the coefficient of variation, spatial classification, and spatial correlation methods, and the influencing factors are analyzed using a spatial regression model. The results are as follows: (1) The coefficients of variation were 2.6 and 3.1 in 2014 and 2019, respectively, indicating that the degree of imbalance of the town’s industrial economy at the county level increased. (2) The distribution of the high-level agglomeration areas was characterized by one core area and two sub-core areas. The main core area was located at the junction of Hangzhou City, Shaoxing City, and Jiaxing City, and the two sub-core areas were located in Yuyao City and the main urban area of Ningbo City. In addition, several small-scale agglomeration areas composed of medium and high-level units were distributed in Wenzhou City. (3) The high-value agglomeration and low-value agglomeration distribution in the spatial correlation patterns was identified using the spatial auto-correlation method. The hot spots and sub-hot spots were distributed in Northern Zhejiang, and the cold spots formed a large-scale agglomeration in Quzhou City, Lishui City, Taizhou City, and several other cities in Southern Zhejiang. (4) Compared with the county scale, the spatial scope of the high-level areas in Northern Zhejiang shrunk significantly at the township scale, and the high-level agglomeration areas along the southeast coast changed into a cluster of several townships. (5) According to the geographically weighted regression (GWR) model, the importance of influencing factors is as follows: population density > regional area > industrial output value per capita > total population > proportion of secondary and tertiary personnel > total employees.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.Informing Worcester is the City of Worcester's open data portal where interested parties can obtain public information at no cost.

Refer to the current geographies boundaries table for a list of all current geographies and recent updates.

This dataset is the definitive version of the annually released statistical area 2 (SA2) boundaries as at 1 January 2025 as defined by Stats NZ. This version contains 2,395 SA2s (2,379 digitised and 16 with empty or null geometries (non-digitised)).

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

The SA2 should:

form a contiguous cluster of one or more SA1s,

excluding exceptions below, allow the release of multivariate statistics with minimal data suppression,

capture a similar type of area, such as a high-density urban area, farmland, wilderness area, and water area,

be socially homogeneous and capture a community of interest. It may have, for example:

• a shared road network,
• shared community facilities,
• shared historical or social links, or
• socio-economic similarity,

​

form a nested hierarchy with statistical output geographies and administrative boundaries. It must:

• be built from SA1s,
• either define or aggregate to define SA3s, urban areas, territorial authorities, and regional councils.

SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents.

In major urban areas, an SA2 or a group of SA2s often approximates a single suburb. In rural areas, rural settlements are included in their respective SA2 with the surrounding rural area.

SA2s in urban areas where there is significant business and industrial activity, for example ports, airports, industrial, commercial, and retail areas, often have fewer than 1,000 residents. These SA2s are useful for analysing business demographics, labour markets, and commuting patterns.

In rural areas, some SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

To minimise suppression of population data, small islands with zero or low populations close to the mainland, and marinas are generally included in their adjacent land-based SA2.

Zero or nominal population SA2s

To ensure that the SA2 geography covers all of New Zealand and aligns with New Zealand’s topography and local government boundaries, some SA2s have zero or nominal populations. These include:

• SA2s where territorial authority boundaries straddle regional council boundaries. These SA2s each have fewer than 200 residents and are: Arahiwi, Tiroa, Rangataiki, Kaimanawa, Taharua, Te More, Ngamatea, Whangamomona, and Mara.
• SA2s created for single islands or groups of islands that are some distance from the mainland or to separate large unpopulated islands from urban areas
• SA2s that represent inland water, inlets or oceanic areas including: inland lakes larger than 50 square kilometres, harbours larger than 40 square kilometres, major ports, other non-contiguous inlets and harbours defined by territorial authority, and contiguous oceanic areas defined by regional council.
• SA2s for non-digitised oceanic areas, offshore oil rigs, islands, and the Ross Dependency. Each SA2 is represented by a single meshblock. The following 16 SA2s are held in non-digitised form (SA2 code; SA2 name):

400001; New Zealand Economic Zone, 400002; Oceanic Kermadec Islands, 400003; Kermadec Islands, 400004; Oceanic Oil Rig Taranaki, 400005; Oceanic Campbell Island, 400006; Campbell Island, 400007; Oceanic Oil Rig Southland, 400008; Oceanic Auckland Islands, 400009; Auckland Islands, 400010 ; Oceanic Bounty Islands, 400011; Bounty Islands, 400012; Oceanic Snares Islands, 400013; Snares Islands, 400014; Oceanic Antipodes Islands, 400015; Antipodes Islands, 400016; Ross Dependency.

SA2 numbering and naming

Each SA2 is a single geographic entity with a name and a numeric code. The name refers to a geographic feature or a recognised place name or suburb. In some instances where place names are the same or very similar, the SA2s are differentiated by their territorial authority name, for example, Gladstone (Carterton District) and Gladstone (Invercargill City).

SA2 codes have six digits. North Island SA2 codes start with a 1 or 2, South Island SA2 codes start with a 3 and non-digitised SA2 codes start with a 4. They are numbered approximately north to south within their respective territorial authorities. To ensure the north–south code pattern is maintained, the SA2 codes were given 00 for the last two digits when the geography was created in 2018. When SA2 names or boundaries change only the last two digits of the code will change.

​

High-definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

Murayama City(Murayama Shi)'s Evaluated land tract (Taxable land area) is 103,513,625[㎡] which is the 519th highest in Japan (by City). It also ranks 10th in Yamagata Prefecture, with 2.94% share of the entire Yamagata. Transition Graphs and Comparison chart between Murayama City and Hida City(Gifu) and Ayauta gun ayagawa Town(Kagawa)(Closest City in Population) are available. Various data can be downloaded and output in csv format for use in EXCEL free of charge.