This map shows Congressional District boundaries for the United States. The map is set to middle Georgia.

Congressional districts are the 435 areas from which members are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states, which is based on decennial census population counts, each state with multiple seats is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The boundaries and numbers shown for the congressional districts are those specified in the state laws or court orders establishing the districts within each state.

Congressional districts for the 108th through 112th sessions were established by the states based on the result of the 2000 Census. Congressional districts for the 113th through 115th sessions were established by the states based on the result of the 2010 Census. Boundaries are effective until January of odd number years (for example, January 2015, January 2017, etc.), unless a state initiative or court ordered redistricting requires a change. All states established new congressional districts in 2011-2012, with the exception of the seven single member states (Alaska, Delaware, Montana, North Dakota, South Dakota, Vermont, and Wyoming).

For the states that have more than one representative, the Census Bureau requested a copy of the state laws or applicable court order(s) for each state from each secretary of state and each 2010 Redistricting Data Program state liaison requesting a copy of the state laws and/or applicable court order(s) for each state. Additionally, the states were asked to furnish their newly established congressional district boundaries and numbers by means of geographic equivalency files. States submitted equivalency files since most redistricting was based on whole census blocks. Kentucky was the only state where congressional district boundaries split some of the 2010 Census tabulation blocks. For further information on these blocks, please see the user-note at the bottom of the tables for this state.

The Census Bureau entered this information into its geographic database and produced tabulation block equivalency files that depicted the newly defined congressional district boundaries. Each state liaison was furnished with their file and requested to review, submit corrections, and certify the accuracy of the boundaries.

The 119th Congressional Districts dataset reflects boundaries from January 03, 2025 from the United States Census Bureau (USCB), and the attributes are updated every Sunday from the United States House of Representatives and is part of the U.S. Department of Transportation (USDOT)/Bureau of Transportation Statistics (BTS) National Transportation Atlas Database (NTAD). The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Information for each member of Congress is appended to the Census Congressional District shapefile using information from the Office of the Clerk, U.S. House of Representatives' website https://clerk.house.gov/xml/lists/MemberData.xml and its corresponding XML file. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. This dataset also includes 9 geographies for non-voting at large delegate districts, resident commissioner districts, and congressional districts that are not defined. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 119th Congress is seated from January 3, 2025 through January 3, 2027. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The TIGER/Line shapefiles for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts reflect information provided to the Census Bureau by the states by May 31, 2024. A data dictionary, or other source of attribute information, is accessible at https://doi.org/10.21949/1529006

Final approved map by the 2020 California Citizens Redistricting Commission for California's United States Congressional Districts; the authoritative and official delineations of California's United States Congressional Districts drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.Each of the 52 Congressional districts apportioned to California have an ideal population of 760,066, and the Commission adhered to federal constitutional mandates by requiring a district population deviation of no more than +/- one person. These districts also posed some of the Commission’s biggest challenges, and, because of strict population equality requirements, resulted in many more splits of counties, cities, neighborhoods, and communities of interest compared to State Assembly or Senate plans.

The legislative districts contain the geographically defined territories used for representation in the California State Assembly, California State Senate and the U.S. House of Representatives from California. These three boundary layers were approved by the California Citizens Redistricting Commission in 2021 following the completion of the 2020 United States Census.

There are 435 seats in the U.S. House of Representatives, of which ** are allocated to the state of California. Seats in the House are allocated based on the population of each state. To ensure proportional and dynamic representation, congressional apportionment is reevaluated every 10 years based on census population data. After the 2020 census, six states gained a seat - Colorado, Florida, Montana, North Carolina, and Oregon. The states of California, Illinois, Michigan, New York, Ohio, Pennsylvania, and West Virginia lost a seat.

Us House Congressional Representatives serving Macon-Bibb County.

Congressional districts are the 435 areas from which members are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states, which is based on decennial census population counts, each state with multiple seats is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The boundaries and numbers shown for the congressional districts are those specified in the state laws or court orders establishing the districts within each state.

Congressional districts for the 108th through 112th sessions were established by the states based on the result of the 2000 Census. Congressional districts for the 113th through 115th sessions were established by the states based on the result of the 2010 Census. Boundaries are effective until January of odd number years (for example, January 2015, January 2017, etc.), unless a state initiative or court ordered redistricting requires a change. All states established new congressional districts in 2011-2012, with the exception of the seven single member states (Alaska, Delaware, Montana, North Dakota, South Dakota, Vermont, and Wyoming).

For the states that have more than one representative, the Census Bureau requested a copy of the state laws or applicable court order(s) for each state from each secretary of state and each 2010 Redistricting Data Program state liaison requesting a copy of the state laws and/or applicable court order(s) for each state. Additionally, the states were asked to furnish their newly established congressional district boundaries and numbers by means of geographic equivalency files. States submitted equivalency files since most redistricting was based on whole census blocks. Kentucky was the only state where congressional district boundaries split some of the 2010 Census tabulation blocks. For further information on these blocks, please see the user-note at the bottom of the tables for this state.

The Census Bureau entered this information into its geographic database and produced tabulation block equivalency files that depicted the newly defined congressional district boundaries. Each state liaison was furnished with their file and requested to review, submit corrections, and certify the accuracy of the boundaries.

The 2022 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The records in this file allow users to map the parts of the 118th Congressional Districts that overlap a particular county. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 118th Congress is seated from January 2023 through December 2024. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The cartographic boundary files for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The generalzied boundaries of all other congressional districts are based on information provided to the Census Bureau by the states by August 31, 2022. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The generalized boundaries for counties and equivalent entities are based on those as of January 1, 2022, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS).

This edition of the Congressional District Atlas contains maps and tables for the 105th Congress of the United States. The maps show the boundaries of each congressional district. Tables listing the jurisdictions that are completely or partially within each congressional district are included. For states with only one congressional district, a state map is included but there is no table. The maps and tables are designed for page size (8 1/2 x 11) printed output. Although the map images use co lor for enhanced viewing, the design allows for acceptable black and white desktop printing. For more information, see the sections on Maps and Tables. Background: 103rd and 104th Congress Following the 1990 decennial census, most states redistricted for the 103rd Congress based upon the apportionment of the seats for the U.S. House of Representatives and the most recent decennial census data. For the 104th Congress, six states redistricted or through court action had either plans revised or redrawn. These states were Georgia, Louisiana, Maine, Minnesota, South Carolina and Virginia. The 104th Congress began January 1995 and continued through the beginning of January 1997. 105th Congress The 105th Congress began January 5, 1997 and continues through the beginning of January 1999. For the 105th Congress, Florida, Georgia, Kentucky, Louisiana, and Texas had new or revised congressional district plans. The Census Bureau retabulated demographic data from the 1990 census to accommodate any congressional district boundary changes from the previous Congress. This data is available on a separate CD-ROM from the Census Bureau Customer Service Branch (301) 457-4100. The 105th Congressional District Atlas CD-ROM provides maps showing the boundaries of the congressional districts of the 105th Congress. To meet the data needs for the 105th Congress, the Census Bureau designed this product on CD-ROM for all states. It contains maps and related entity tables in Adobe.

Note to Users: This CD is part of a collection located in the Data Archive of the Odum Institute for Research in Social Science, at the University of North Carolina at Chapel Hill. The collection is located in Room 10, Manning Hall. Users may check the CDs out subscribing to the honor system. Items can be checked out for a period of two weeks. Loan forms are located adjacent to the collection.

US Congressional District boundaries for New York City. All previously released versions of this data are available at DCP Website: BYTES of the BIG APPLE.

This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 118th Congress is seated from January 2023 through December 2024. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The TIGER/Line shapefiles for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts reflect information provided to the Census Bureau by the states by August 31, 2022.

The downloadable ZIP file contains Esri shapefiles and PDF maps. Contains the information used to determine the location of the new legislative and congressional district boundaries for the state of Idaho as adopted by Idaho's first Commission on Redistricting on March 9, 2002. Contains viewable and printable legislative and congressional district maps, viewable and printable reports, and importable geographic data files.These data were contributed to INSIDE Idaho at the University of Idaho Library in 2001. CD/DVD -ROM availability: https://alliance-primo.hosted.exlibrisgroup.com/permalink/f/m1uotc/CP71156191150001451These files were created by a six-person, by-partisan commission, consisting of six commission members, three democrats and three republicans. This commission was given 90 days to redraw congressional and legislative district boundaries for the state of Idaho. Due to lawsuits, the process was extended. This legislative plan was approved by the commission on March 9th, 2002 and was previously called L97. All digital data originates from TIGER/Line files and 2000 U.S. Census data.Frequently asked questions:How often are Idaho's legislative and congressional districts redrawn? Once every ten years after each census, as required by law, or when directed by the Idaho Supreme Court. The most recent redistricting followed the 2000 census. Redistricting is not expected to occur again in Idaho until after the 2010 census. Who redrew Idaho's legislative and congressional districts? In 2001, for the first time, Idaho used a citizens' commission to redraw its legislative and congressional district boundaries. Before Idaho voters amended the state Constitution in 1994 to create a Redistricting Commission, redistricting was done by a committee of the Idaho Legislature. The committee's new district plans then had to pass the Legislature before becoming law. Who was on the Redistricting Commission? Idaho's first Commission on Redistricting was composed of Co-Chairmen Kristi Sellers of Chubbuck and Tom Stuart of Boise and Stanley. The other four members were Raymond Givens of Coeur d'Alene, Dean Haagenson of Hayden Lake, Karl Shurtliff of Boise, John Hepworth of Buhl (who resigned effective December 4, 2001), and Derlin Taylor of Burley (who was appointed to replace Mr. Hepworth). What are the requirements for being a Redistricting Commissioner? According to Idaho Law, no person may serve on the commission who: 1. Is not a registered voter of the state at the time of selection; or 2. Is or has been within one (1) year a registered lobbyist; or 3. Is or has been within two (2) years prior to selection an elected official or elected legislative district, county or state party officer. (This requirement does not apply to precinct committeepersons.) The individual appointing authorities may consider additional criteria beyond these statutory requirements. Idaho law also prohibits a person who has served on the Redistricting Commission from serving in either house of the legislature for five years following their service on the commission. When did Idaho's first Commission on Redistricting meet? Idaho law allows the Commission only 90 days to conduct its business. The Redistricting Commission was formed on June 5, 2001. Its 90-day time period would expire on September 3, 2001. After holding hearings around the state in June and July, a majority of the Commission voted to adopt new legislative and congressional districts on August 22, 2001. On November 29th, the Idaho Supreme Court ruled the Commission's legislative redistricting plan unconstitutional and directed them to reconvene and adopt an alternative plan. The Commission did so, adopting a new plan on January 8, 2000. The Idaho Supreme Court found the Commission's second legislative map unconstitutional on March 1, 2002 and ordered the Commission to try again. The Commission adopted a third plan on March 9, 2002. The Supreme Court denied numerous challenges to this third map. It then became the basis for the 2002 primary and General elections and is expected to be used until the 2012 elections. What is the basic timetable for Idaho to redraw its legislative and congressional districts?Typically, and according to Idaho law, the Redistricting Commission cannot be formally convened until after Idaho has received the official census counts and not before June 1 of a year ending in one. Idaho's first Commission on redistricting was officially created on June 5, 2001. By law, a Commission then has 90 days (or until September 3, 2001 in the case of Idaho's first Commission) to approve new legislative and congressional district boundaries based on the most recent census figures. If at least four of the six commissioners fail to approve new legislative and congressional district plans before that 90-day time period expires, the Commission will cease to exist. The law is silent as to what happens next. Could you summarize the important dates for Idaho's first Commission on Redistricting one more time please? After January 1, 2001 but before April 1, 2001: As required by federal law, the Census Bureau must deliver to the states the small area population counts upon which redistricting is based. The Census Bureau determines the exact date within this window when Idaho will get its population figures. Idaho's were delivered on March 23, 2001. Why conduct a census anyway? The original and still primary reason for conducting a national census every ten years is to determine how the 435 seats in the United States House of Representatives are to be apportioned among the 50 states. Each state receives its share of the 435 seats in the U.S. House based on the proportion of its population to that of the total U.S. population. For example, the population shifts during the 1990's resulted in the Northeastern states losing population and therefore seats in Congress to the Southern and the Western states. What is reapportionment? Reapportionment is a federal issue that applies only to Congress. It is the process of dividing up the 435 seats in the U.S. House of Representatives among the 50 states based on each state's proportion of the total U.S. population as determined by the most recent census. Apportionment determines the each state's power, as expressed by the size of their congressional delegation, in Congress and, through the electoral college, directly affects the selection of the president (each state's number of votes in the electoral college equals the number of its representatives and senators in Congress). Like all states, Idaho has two U.S. senators. Based on our 1990 population of 1,006,000 people and our 2000 population of 1,293,953, and relative to the populations of the other 49 states, Idaho will have two seats in the U.S. House of Representatives. Even with the state's 28.5% population increase from 1990 to 2000, Idaho will not be getting a third seat in the U.S. House of Representatives. Assuming Idaho keeps growing at the same rate it did through the decade of the 1990's, it will likely be 30 or 40 years (after 3 or 4 more censuses) before Idaho gets a third congressional seat. What is redistricting? Redistricting is the process of redrawing the boundaries of legislative and congressional districts within each state to achieve population equality among all congressional districts and among all legislative districts. The U.S. Constitution requires this be done for all congressional districts after each decennial census. The Idaho Constitution also requires that this be done for all legislative districts after each census. The democratic principle behind redistricting is "one person, one vote." Requiring that districts be of equal population ensures that every elected state legislator or U.S. congressman represents very close to the same number of people in that state, therefore, each citizen's vote will carry the same weight. How are reapportionment and redistricting related to the census? The original and still primary reason for conducting a census every ten years is to apportion the (now) 435 seats in the U.S. House of Representatives among the several states. The census records population changes and is the legally recognized basis for redrawing electoral districts of equal population. Why is redistricting so important? In a democracy, it is important for all citizens to have equal representation. The political parties also see redistricting as an opportunity to draw districts that favor electing their members and, conversely, that are unfavorable for electing their political opposition. (It's for this reason that redistricting has been described as "the purest form of political bloodsport.") What is PL 94-171? Public Law (PL) 94-171 (Title 13, United States Code) was enacted by Congress in 1975. It was intended to provide state legislatures with small-area census population totals for use in redistricting. The law's origins lie with the "one person, one vote" court decisions in the 1960's. State legislatures needed to reconcile Census Bureau's small geographic area boundaries with voting tabulation districts (precincts) boundaries to create legislative districts with balanced populations. The Census Bureau worked with state legislatures and others to meet this need beginning with the 1980 census. The resulting Public Law 94-171 allows states to work voluntarily with the Census Bureau to match voting district boundaries with small-area census boundaries. With this done, the Bureau can report to those participating states the census population totals broken down by major race group and Hispanic origin for the total population and for persons aged 18 years and older for each census subdivision. Idaho participated in the Bureau's Census 2000 Redistricting Data Program and, where counties used visible features to delineate precinct boundaries, matched those boundaries with census reporting areas. In those instances where counties did not use visible features to

This polygon shapefile depicts boundaries for Congressional Districts 3, 6, 7 and 9 for the County of Sacramento, California as of 2015. Current Congressional District boundaries were drawn in 2011 by the California Citizens Redistricting Commission and took effect with the 2012 election. California is the most populous state in the United States, so has the most representation in the United States House of Representatives, with each Representative representing one Congressional District. The United States is divided into 435 Congressional Districts — 53 in California — each with a population of about 710,000 individuals. Each District elects a representative to the House for a 2 year term. This layer is part of a collection of data originally produced for Sacramento County, California.

US Congressional District boundaries for New York City including portions under water. All previously released versions of this data are available on the DCP Website: BYTES of the BIG APPLE.

This feature layer represents the boundaries of Connecticut's congressional districts based on the latest redistricting process following the 2020 Census. More information about the 2021 Redistricting Project can be found here.

The dataset includes the five congressional districts with fields identifying the current U.S. House Representative and their associated political party for each district. The geometry is derived from the published data from the Connecticut General Assembly.

The CT Congressional Representations are as described here.

Collection of CT Legislative District published feature layers:

• Congressional districts
• Senate districts
• House districts

Attributes

This web map of California legislative districts includes the geographically defined territories used for representation in the California State Assembly, California State Senate and the US House of Representatives from California. These three boundary layers are derived from the US Census Bureau's 2018 TIGER/Line database and are designed to overlay with the California Department of Education’s (CDE) education related GIS content.

The 80 California State Assembly Districts represent the geographically defined territories used for electing members to the lower (house) chamber of the California State Legislature. The current state assembly boundaries were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020.

The 40 state senate districts represent the geographically defined territories used for electing members to the upper (senate) chamber of the California State Legislature. The current state senate boundaries were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020.

The 53 congressional districts within the State of California represent the geographically defined territories used for electing members to the U.S. House of Representatives. The current U.S. Congressional boundaries in California were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020

The 2023 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The records in this file allow users to map the parts of the 118th Congressional Districts that overlap a particular county. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 118th Congress is seated from January 2023 through December 2024. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The cartographic boundary files for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The generalzied boundaries of all other congressional districts are based on information provided to the Census Bureau by the states by August 31, 2022. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The generalized boundaries for counties and equivalent entities are based on those as of January 1, 2023, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS).

The California Citizens Redistricting Commission (Commissioner) was established pursuant to the procedures set forth by Proposition 11, the Voters First Act, and Proposition 20, the Voters First Act for Congress, the provisions of which are now found in Section 2 of Article XXI of the California Constitution and at Government Code Section 8252. These constitutional and statutory provisions set forth the Commission’s responsibilities with respect to drawing the boundary lines for the California Assembly, Senate, Board of Equalization and Congressional districts (the Maps).Resolution of August 15, 2011 certifying the statewide California Congressional districts were approved by the Commission in the manner required by Section 2 of Article XXI of the California Constitution; a copy of the statewide Congressional map; copies of the 53 individual Congressional districts; and a “disc” labeled crc_20110815_congress_certified_statewide.zip SHA-1: 1893c0695a42454a202f5b1ef433abff6b491db9 containing the unique data files for the Congressional districts from which the statewide and individual district maps are created.Commission Background:In accordance with the Voters FIRST Act (Act), the California State Auditor randomly selected the first eight members of the first Citizens Redistricting Commission (Commission) on November 18, 2010. These first eight commissioners—three who are Democrats, three who are Republican, and two who are either Decline-to-State or are registered with another party—were part of the 36 eligible applicants that remained in the sub-pools after the legislative leaders, exercised their authority to make strikes and eliminated the names of 24 applicants from the pool of 60 of the most qualified applicants identified on September 23, 2010 by the Auditor’s Applicant Review Panel (Panel). The Panel reviewed and evaluated the applicants based on criteria set forth by the Act approved by voters in November 2008; including relevant analytical skills, the ability to be impartial; and a demonstrated appreciation for California’s diverse demographics and geography.

© California Citizens Redistricting Commission

THIS LAYER HAS BEEN DEPRECATED AND WILL BE RETIRED 6-30-2022. This polygon layer delineates the US Congressional District boundaries in New Jersey, 2012 - 2022. This version of the layer uses high-quality base map spatial data published by the State of New Jersey, instead of Census Bureau geographic data (TIGER.) Where no higher-quality data were available, the TIGER lines were used.This layer, which overlays correctly the highest quality municipal boundary data for New Jersey is an UNofficial version; by law, the official version is based on US Census data (geographic and demographic.)

Congressional Districts are areas bounded on all sides by visible features such as streets, roads, streams, railroad tracks, and/or by nonvisible boundaries such as census block, city, town, township, county limits, and short line-of-sight extensions of roads or other linear features. Municipalities split between congressional districts were split by snapping to these lines.

Known as: Congressional District Boundaries for the State of New Jersey, 2012 - 2022; unofficial, nj_munis - based
(Govt_admin_condis)

The 2015 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The records in this file allow users to map the parts of the 114th Congressional Districts that overlap a particular county. Congressional Districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 114th Congress is seated from January 2015 to 2017. The TIGER/Line shapefiles for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts are provided to the Census Bureau through the Redistricting Data Program (RDP). The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the state of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for counties and equivalent entities are mostly as of January 1, 2013, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS). However, some changes made after January 2013, including the addition and deletion of counties, are included.

The Geographic Information Systems (GIS) Unit falls under the purview of the County of Santa Cruz Information Services Department. The GIS Unit serves all County departments and external customers and provides data on land, features and people of Santa Cruz County. Santa Cruz County encompasses 4 cities and approximately 265,000 people. This coverage can be used for basic applications such as viewing, querying and map output production, or to provide a basemap to support graphical overlays and analyses of geospatial data.