U.S. Census BlocksThis feature layer, utilizing National Geospatial Data Asset (NGDA) data from the U.S. Census Bureau (USCB), displays Census Blocks in the United States. A brief description of Census Blocks, per USCB, is that "Census blocks are statistical areas bounded by visible features such as roads, streams, and railroad tracks, and by nonvisible boundaries such as property lines, city, township, school district, county limits and short line-of-sight extensions of roads." Also, "the smallest level of geography you can get basic demographic data for, such as total population by age, sex, and race."Census Block 1007Data currency: This cached Esri federal service is checked weekly for updates from its enterprise federal source (Census Blocks) and will support mapping, analysis, data exports and OGC API – Feature access.NGDAID: 69 (Series Information for 2020 Census Block State-based TIGER/Line Shapefiles, Current)OGC API Features Link: (U.S. Census Blocks - OGC Features) copy this link to embed it in OGC Compliant viewersFor more information, please visit: What are census blocksFor feedback please contact: Esri_US_Federal_Data@esri.comNGDA Data SetThis data set is part of the NGDA Governmental Units, and Administrative and Statistical Boundaries Theme Community. Per the Federal Geospatial Data Committee (FGDC), this theme is defined as the "boundaries that delineate geographic areas for uses such as governance and the general provision of services (e.g., states, American Indian reservations, counties, cities, towns, etc.), administration and/or for a specific purpose (e.g., congressional districts, school districts, fire districts, Alaska Native Regional Corporations, etc.), and/or provision of statistical data (census tracts, census blocks, metropolitan and micropolitan statistical areas, etc.). Boundaries for these various types of geographic areas are either defined through a documented legal description or through criteria and guidelines. Other boundaries may include international limits, those of federal land ownership, the extent of administrative regions for various federal agencies, as well as the jurisdictional offshore limits of U.S. sovereignty. Boundaries associated solely with natural resources and/or cultural entities are excluded from this theme and are included in the appropriate subject themes."For other NGDA Content: Esri Federal Datasets

The map provide functions for individual to look up locations and the boundaries of Census Block Group numbers by address or Census Block Group Number. The data resources are based on Esri ArcGIS (www.arcgis.com) and Census Block 2010 Data (www.census.gov/). It covers Census Block's demographic information which are population, race, gender, age, and household. The geocoder which used through the Esri ArcGIS may not be able to provide rooftop accuracy since it is that the addresses are in the range dataset instead of the accurate points. The spatial data may haven't been updated to cause error. You can find additional information .You can find additional information on https://factfinder.census.gov/faces/nav/jsf/pages/searchresults.xhtml?ref=addr&refresh=t#.

This layer contains a Vermont-only subset of block group level 2020 Decennial Census redistricting data as reported by the U.S. Census Bureau for all states plus DC and Puerto Rico. The attributes come from the 2020 Public Law 94-171 (P.L. 94-171) tables.Data download date: August 12, 2021Census tables: P1, P2, P3, P4, H1, P5, HeaderDownloaded from: Census FTP siteProcessing Notes:Data was downloaded from the U.S. Census Bureau FTP site, imported into SAS format and joined to the 2020 TIGER boundaries. Boundaries are sourced from the 2020 TIGER/Line Geodatabases. Boundaries have been projected into Web Mercator and each attribute has been given a clear descriptive alias name. No alterations have been made to the vertices of the data.Each attribute maintains it's specified name from Census, but also has a descriptive alias name and long description derived from the technical documentation provided by the Census. For a detailed list of the attributes contained in this layer, view the Data tab and select "Fields". The following alterations have been made to the tabular data:Joined all tables to create one wide attribute table:P1 - RaceP2 - Hispanic or Latino, and not Hispanic or Latino by RaceP3 - Race for the Population 18 Years and OverP4 - Hispanic or Latino, and not Hispanic or Latino by Race for the Population 18 Years and OverH1 - Occupancy Status (Housing)P5 - Group Quarters Population by Group Quarters Type (correctional institutions, juvenile facilities, nursing facilities/skilled nursing, college/university student housing, military quarters, etc.)HeaderAfter joining, dropped fields: FILEID, STUSAB, CHARITER, CIFSN, LOGRECNO, GEOVAR, GEOCOMP, LSADC, and BLOCK.GEOCOMP was renamed to GEOID and moved be the first column in the table, the original GEOID was dropped.Placeholder fields for future legislative districts have been dropped: CD118, CD119, CD120, CD121, SLDU22, SLDU24, SLDU26, SLDU28, SLDL22, SLDL24 SLDL26, SLDL28.P0020001 was dropped, as it is duplicative of P0010001. Similarly, P0040001 was dropped, as it is duplicative of P0030001.In addition to calculated fields, County_Name and State_Name were added.The following calculated fields have been added (see long field descriptions in the Data tab for formulas used): PCT_P0030001: Percent of Population 18 Years and OverPCT_P0020002: Percent Hispanic or LatinoPCT_P0020005: Percent White alone, not Hispanic or LatinoPCT_P0020006: Percent Black or African American alone, not Hispanic or LatinoPCT_P0020007: Percent American Indian and Alaska Native alone, not Hispanic or LatinoPCT_P0020008: Percent Asian alone, Not Hispanic or LatinoPCT_P0020009: Percent Native Hawaiian and Other Pacific Islander alone, not Hispanic or LatinoPCT_P0020010: Percent Some Other Race alone, not Hispanic or LatinoPCT_P0020011: Percent Population of Two or More Races, not Hispanic or LatinoPCT_H0010002: Percent of Housing Units that are OccupiedPCT_H0010003: Percent of Housing Units that are VacantPlease note these percentages might look strange at the individual block group level, since this data has been protected using differential privacy.*VCGI exported a Vermont-only subset of the nation-wide layer to produce this layer--with fields limited to this popular subset: OBJECTID: OBJECTID GEOID: Geographic Record Identifier NAME: Area Name-Legal/Statistical Area Description (LSAD) Term-Part Indicator County_Name: County Name State_Name: State Name P0010001: Total Population P0010003: Population of one race: White alone P0010004: Population of one race: Black or African American alone P0010005: Population of one race: American Indian and Alaska Native alone P0010006: Population of one race: Asian alone P0010007: Population of one race: Native Hawaiian and Other Pacific Islander alone P0010008: Population of one race: Some Other Race alone P0020002: Hispanic or Latino Population P0020003: Non-Hispanic or Latino Population P0030001: Total population 18 years and over H0010001: Total housing units H0010002: Total occupied housing units H0010003: Total vacant housing units P0050001: Total group quarters population PCT_P0030001: Percent of Population 18 Years and Over PCT_P0020002: Percent Hispanic or Latino PCT_P0020005: Percent White alone, not Hispanic or Latino PCT_P0020006: Percent Black or African American alone, not Hispanic or Latino PCT_P0020007: Percent American Indian and Alaska Native alone, not Hispanic or Latino PCT_P0020008: Percent Asian alone, not Hispanic or Latino PCT_P0020009: Percent Native Hawaiian and Other Pacific Islander alone, not Hispanic or Latino PCT_P0020010: Percent Some Other Race alone, not Hispanic or Latino PCT_P0020011: Percent Population of two or more races, not Hispanic or Latino PCT_H0010002: Percent of Housing Units that are Occupied PCT_H0010003: Percent of Housing Units that are Vacant SUMLEV: Summary Level REGION: Region DIVISION: Division COUNTY: County (FIPS) COUNTYNS: County (NS) TRACT: Census Tract BLKGRP: Block Group AREALAND: Area (Land) AREAWATR: Area (Water) INTPTLAT: Internal Point (Latitude) INTPTLON: Internal Point (Longitude) BASENAME: Area Base Name POP100: Total Population Count HU100: Total Housing Count *To protect the privacy and confidentiality of respondents, data has been protected using differential privacy techniques by the U.S. Census Bureau. This means that some individual block groups will have values that are inconsistent or improbable. However, when aggregated up, these issues become minimized.Download Census redistricting data in this layer as a file geodatabase.Additional links:U.S. Census BureauU.S. Census Bureau Decennial CensusAbout the 2020 Census2020 Census2020 Census data qualityDecennial Census P.L. 94-171 Redistricting Data Program

The Bureau of the Census has released Census 2000 Summary File 1 (SF1) 100-Percent data. The file includes the following population items: sex, age, race, Hispanic or Latino origin, household relationship, and household and family characteristics. Housing items include occupancy status and tenure (whether the unit is owner or renter occupied). SF1 does not include information on incomes, poverty status, overcrowded housing or age of housing. These topics will be covered in Summary File 3. Data are available for states, counties, county subdivisions, places, census tracts, block groups, and, where applicable, American Indian and Alaskan Native Areas and Hawaiian Home Lands. The SF1 data are available on the Bureau's web site and may be retrieved from American FactFinder as tables, lists, or maps. Users may also download a set of compressed ASCII files for each state via the Bureau's FTP server. There are over 8000 data items available for each geographic area. The full listing of these data items is available here as a downloadable compressed data base file named TABLES.ZIP. The uncompressed is in FoxPro data base file (dbf) format and may be imported to ACCESS, EXCEL, and other software formats. While all of this information is useful, the Office of Community Planning and Development has downloaded selected information for all states and areas and is making this information available on the CPD web pages. The tables and data items selected are those items used in the CDBG and HOME allocation formulas plus topics most pertinent to the Comprehensive Housing Affordability Strategy (CHAS), the Consolidated Plan, and similar overall economic and community development plans. The information is contained in five compressed (zipped) dbf tables for each state. When uncompressed the tables are ready for use with FoxPro and they can be imported into ACCESS, EXCEL, and other spreadsheet, GIS and database software. The data are at the block group summary level. The first two characters of the file name are the state abbreviation. The next two letters are BG for block group. Each record is labeled with the code and name of the city and county in which it is located so that the data can be summarized to higher-level geography. The last part of the file name describes the contents . The GEO file contains standard Census Bureau geographic identifiers for each block group, such as the metropolitan area code and congressional district code. The only data included in this table is total population and total housing units. POP1 and POP2 contain selected population variables and selected housing items are in the HU file. The MA05 table data is only for use by State CDBG grantees for the reporting of the racial composition of beneficiaries of Area Benefit activities. The complete package for a state consists of the dictionary file named TABLES, and the five data files for the state. The logical record number (LOGRECNO) links the records across tables.

Overview This dataset re-shares cartographic and demographic data from the U.S. Census Bureau to provide an obvious supplement to Open Environments Block Group publications.These results do not reflect any proprietary or predictive model. Rather, they extract from Census Bureau results with some proportions and aggregation rules applied. For additional support or more detail, please see the Census Bureau citations below. Cartographics refer to shapefiles shared in the Census TIGER/Line publications. Block Group areas are updated annually, with major revisions accompanying the Decennial Census at the turn of each decade. These shapes are useful for visualizing estimates as a map and relating geographies based upon geo-operations like overlapping. This data is kept in a geodatabase file format and requires the geopandas package and its supporting fiona and DAL software. Demographics are taken from popular variables in the American Community Survey (ACS) including age, race, income, education and family structure. This data simply requires csv reader software or pythons pandas package. While the demographic data has many columns, the cartographic data has a very, very large column called "geometry" storing the many-point boundaries of each shape. So, this process saves the data separately, with demographics columns in a csv file and geometry in a gpd file needed an installation of geopandas, fiona and DAL software. More details on the ACS variables selected and derivation rules applied can be found in the commentary docstrings in the source code found here: https://github.com/OpenEnvironments/blockgroupdemographics. ## Files While the demographic data has many columns, the cartographic data has a very, very large column called "geometry" storing the many-point boundaries of each shape. So, this process saves the data separately, with demographics columns in a csv file named YYYYblcokgroupdemographics.csv. The cartographic column, 'geometry', is shared as file named YYYYblockgroupdemographics-geometry.pkl. This file needs an installation of geopandas, fiona and DAL software.

This viewer contains data directly from the U.S. Census Bureau. Use this map viewer to identify 2020 Census tract, block group, or block at a location. Map is centered on the City of Long Beach and shows the City boundary as recorded in the Census incorporated places layer. Data source: https://www.census.gov/data/developers/data-sets/TIGERweb-map-service.htmlAbout Census Tracts: https://www.census.gov/programs-surveys/geography/about/glossary.html#par_textimage_13About Census Block Groups: https://www.census.gov/programs-surveys/geography/about/glossary.html#par_textimage_4About Census Blocks: https://www.census.gov/programs-surveys/geography/about/glossary.html#par_textimage_5

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. This data set represents the boundaries of the 2020 Census Block Groups, extracted from the MTDB in 2020. The feature class was re-projected from the Census Bureau shapefile tl_2020_34_bg20.shp . Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. A BG usually covers a contiguous area. BGs never cross county or census tract boundaries. The BG boundaries in this release were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census. For additional references to explain the data, see Supplemental Information.

This dataset and map service provides information on the U.S. Housing and Urban Development's (HUD) low to moderate income areas. The term Low to Moderate Income, often referred to as low-mod, has a specific programmatic context within the Community Development Block Grant (CDBG) program. Over a 1, 2, or 3-year period, as selected by the grantee, not less than 70 percent of CDBG funds must be used for activities that benefit low- and moderate-income persons. HUD uses special tabulations of Census data to determine areas where at least 51% of households have incomes at or below 80% of the area median income (AMI). This dataset and map service contains the following layer.

In this dataset we present two maps that estimate the location and population served by domestic wells in the contiguous United States. The first methodology, called the “Block Group Method” or BGM, builds upon the original block-group data from the 1990 census (the last time the U.S. Census queried the population regarding their source of water) by incorporating higher resolution census block data. The second methodology, called the “Road-Enhanced Method” or REM, refines the locations by using a buffer expansion and shrinkage technique along roadways to define areas where domestic wells exist. The fundamental assumption with this method is that houses (and therefore domestic wells) are located near a named road. The results are presented as two nationally consistent domestic-well population datasets. While both methods can be considered valid, the REM map is more precise in locating domestic wells; the REM map had a smaller amount of spatial bias (nearly equal vs biased in type 1 error), total error (10.9% vs 23.7%,), and distance error (2.0 km vs 2.7 km), when comparing the REM and BGM maps to a California calibration map. However, the BGM map is more inclusive of all potential locations for domestic wells. The primary difference in the BGM and the REM is the mapping of low density areas. The REM has a 57% reduction in areas mapped as low density (populations greater than 0 but less than 1 person per km), concentrating populations into denser regions. Therefore, if one is trying to capture all of the potential areas of domestic-well usage, then the BGM map may be more applicable. If location is more imperative, then the REM map is better at identifying areas of the landscape with the highest probability of finding a domestic well. Depending on the purpose of a study, a combination of both maps can be used. For space concerns, the datasets have been divided into two separate geodatabases. The BGM map geodatabase and the REM map database.

The Community Development Block Grant (CDBG) program requires that each CDBG funded activity must either principally benefit low- and moderate-income persons, aid in the prevention or elimination of slums or blight, or meet a community development need having a particular urgency because existing conditions pose a serious and immediate threat to the health or welfare of the community and other financial resources are not available to meet that need. With respect to activities that principally benefit low- and moderate-income persons, at least 51 percent of the activity's beneficiaries must be low and moderate income. For CDBG, a person is considered to be of low income only if he or she is a member of a household whose income would qualify as "very low income" under the Section 8 Housing Assistance Payments program. Generally, these Section 8 limits are based on 50% of area median. Similarly, CDBG moderate income relies on Section 8 "lower income" limits, which are generally tied to 80% of area median. These data are from the 2011-2015 American Community Survey (ACS). To learn more about the Low to Moderate Income Populations visit: https://www.hudexchange.info/programs/acs-low-mod-summary-data/, for questions about the spatial attribution of this dataset, please reach out to us at GISHelpdesk@hud.gov. Data Dictionary: DD_Low to Moderate Income Populations by Block GroupDate of Coverage: ACS 2020-2016

This dataset is a categorical mapping of estimated mean building heights, by Census block group, in shapefile format for the conterminous United States. The data were derived from the NASA Shuttle Radar Topography Mission, which collected “first return” (top of canopy and buildings) radar data at 30-m resolution in February, 2000 aboard the Space Shuttle Endeavor. These data were processed here to estimate building heights nationally, and then aggregated to block group boundaries. The block groups were then categorized into six classes, ranging from “Low” to “Very High”, based on the mean and standard deviation breakpoints of the data. The data were evaluated in several ways, to include comparing them to a reference dataset of 85,000 buildings for the city of San Francisco for accuracy assessment and to provide contextual definitions for the categories.

TIGERweb allows the viewing of TIGER spatial data online and for TIGER data to be streamed to your mapping application. TIGERweb consists of a web mapping service and a REST service. Thew web mapping service is an Open Geospatial Consortium (OGC) service that allows users to visualize our TIGER (Topologically Integrated Geographic Encoding and Referencing database) data. This service consists of two applications and eight services. The applications allow users to select features and view their attributes, to search for features by name or geocode, and to identify features by selecting them from a map. The TIGERweb applications are a simple way to view our TIGER data without having to download the data. The web Mapping services provide a simple HTTP interface for requesting geo-registered map images from our geospatial database. It allows users to produce maps containing TIGERweb layers with layers from other servers. TIGERweb consists of the following two applications and eight services: Applications: TIGERweb, TIGERweb Decennial Services: Current, ACS16, ACS15, ACS14, ACS13, Econ12, Census 2010 (for the TIGERweb application), Physical Features (for the TIGERweb application), Census 2010 (for the TIGERweb Decennial application), Census 2000 and Physical Features (for the TIGERweb Decennial application) The REST service is a way for Web clients to communicate with geographic information system (GIS) servers through Representational State Transfer (REST) technology. It allows users to interface with the REST server with structured URLs using a computer language like PYTHON or JAVA. The server responds with map images, text-based geographic information, or other resources that satisfy the request. There are three groups of services: TIGERweb, TIGERweb Generalized and TIGERweb Decennial. TIGERweb consists of boundaries as of January 1, 2016 while TIGERweb Decennial consists of boundaries as they were of January 1, 2010. TIGERweb Generalized is specifically designed for small-scale thematic mapping. The following REST services are offered for both groups: American Indian, Alaska Native, and Native Hawaiian Areas Census Regions and Divisions Census Tracts and Blocks Legislative Areas Metropolitan and Micropolitan Statistical Areas and Related Statistical Areas Places and County Subdivisions PUMAs, UGAs and ZCTAs School Districts States and Counties Urban Areas The following services are only offered in TIGERweb and TIGERweb Decennial: Hydrography Labels Military and Other Special Land Use Areas Transportation (Roads and Railroads) Tribal Census Tracts and Block Groups The following services is only offered in TIGERweb Generalized: Places and County Subdivisions (Economic Places)

Important Note: This item is in mature support as of June 2023 and will retire in December 2025. A new version of this item is available for your use.The layers going from 1:1 to 1:1.5M present the 2010 Census Urbanized Areas (UA) and Urban Clusters (UC). A UA consists of contiguous, densely settled census block groups (BGs) and census blocks that meet minimum population density requirements (1000 people per square mile (ppsm) / 500 ppsm), along with adjacent densely settled census blocks that together encompass a population of at least 50,000 people. A UC consists of contiguous, densely settled census BGs and census blocks that meet minimum population density requirements, along with adjacent densely settled census blocks that together encompass a population of at least 2,500 people, but fewer than 50,000 people. The dataset covers the 50 States plus the District of Columbia within United States. The layer going over 1:1.5M presents the urban areas in the United States derived from the urban areas layer of the Digital Chart of the World (DCW). It provides information about the locations, names, and populations of urbanized areas for conducting geographic analysis on national and large regional scales. To download the data for this layer as a layer package for use in ArcGIS desktop applications, refer to USA Census Urban Areas.

Regional Heat Vulnerability Map and Cooling Solutions

The regional heat vulnerability map and cooling solutions webtool offers two data sources for equitable heat mitigation. The dashboard layers vulnerability data onto land surface temperature regional rankings to identify areas with high and low heat exposure and vulnerability as well as the existing assets in each census block group. Additional layers can be added into the heat vulnerability map to highlight how heat affects critical infrastructures including schools, mobile home parks, parking lots, public transportation stops, pedestrian thoroughfares, and bikeways. The solutions tab showcases a variety of heat mitigation solutions and the research behind them. Heat-related solutions and resources from urban Maricopa County are included, including solutions funded through the Healthy Urban Environment Initiative. The data catalogued here are the underlying data that populate the webtool.

Healthy Urban Environment (HUE) Initiative - Overview

HUE is a solutions-focused research, policy and technology incubator to create healthier communities across Maricopa County (central Arizona, USA) through collaboration between researchers, practitioners and community members. As such, HUE funded rapid development, testing and deployment of heat-mitigation and air-quality improvement strategies and technologies.

Heat emerged as the urgent focus, as urban centers across the desert Southwest continue to grow in size and density, aggravating existing challenges posed by the expansion of the built environment. In Phoenix, AZ, this expansion of the built environment creates conditions which magnify the intensity and duration of heat – making it difficult for residents to achieve thermal comfort throughout the day and night. Further, the legacies of urban sprawl and transportation planning in the Phoenix, Arizona metropolitan area have contributed to challenges with atmospheric pollutants. Importantly, urban heat and air quality issues intersect to produce negative health incomes that impact the region’s communities, particularly those who are most vulnerable and least able to adapt.

This work was funded as part of the Healthy Urban Environments (HUE) initiative by the Maricopa County Industrial Development Authority (MCIDA), Award #AWD00033817. This funding facilitated collaboration between the City of Tempe, the Decision Theater at Arizona State University (ASU) and ASU researchers to build an interactive webtool to assist local municipalities, nonprofits, community members, researchers, and other stakeholders in understanding heat, vulnerabilities, and solutions to heat in urban Maricopa County region.

The following data were used for the Department of Water Resources' (DWR) Disadvantaged Communities (DAC) Mapping Tool: https://gis.water.ca.gov/app/dacs/. The data source is from the US Census (American Community Survey), that may include attribute table additions by DWR. The DAC Mapping Tool was designed, and the related datasets made publicly available, to assist in the evaluation of DACs throughout the state, as may relate to the various Grant Programs within the Financial Assistance Branch (FAB) at DWR. The definition of DAC may vary by grant program (within FAB, DWR or grant programs of other public agencies). As such, users should be familiar with the specific requirements for meeting DAC status, based on the particular grant solicitation/program of interest.

For more information related to the Grant Programs within the Financial Assistance Branch, visit: https://water.ca.gov/Work-With-Us/Grants-And-Loans/IRWM-Grant-Programs https://water.ca.gov/Work-With-Us/Grants-And-Loans/Sustainable-Groundwater

Additional questions or requests for information related to the DAC datasets (or the DAC Mapping Tool) should be directed to: dwr_irwm@water.ca.gov.

For more information on DWR's FAB programs, please visit: https://water.ca.gov/Work-With-Us/Grants-And-Loans/IRWM-Grant-Programs

See where community members and organizations have adopted blocks. Search by address, group name or by using the map controls. Click the block lines to see how has adopted the block.The program helps beautify neighborhoods and allows citizens and families to take an active role in cleaning and greening the District. Adopt-A-Block offers a hands-on project for people and organizations to participate in making a noticeable contribution to their communities.For more information, please visit the Adopt a Block website.

The data package includes two files: a TIFF file and a CSV file. The TIFF file (raster) represents a binary power interruptions map of the Texas region during the February 2021 winter storm. This map has a spatial resolution of 15 arc-seconds and was generated by detecting power interruptions in a composite nighttime lights image of the Texas region from February 14-18, 2021. Each pixel in the map corresponds to a geographical location and indicates whether an interruption was detected in that location or not. A pixel with a value of 1 represents an interruption, while a pixel with a value of 0 represents no interruption. In most cases, the missing pixels indicate the absence of population, but in some cases, they indicate data unavailability. The dataset also includes a CSV file that provides the estimated share of population in outage in each Census block group (CBG) of the Texas region. This file was created by aggregating pixel-level outage values from the TIFF file to the CBG level. Together, the TIFF and CSV files in the dataset provide a detailed view of the electric service interruptions that were observed across the Texas region during the severe winter storm of February 2021.

The risk of natural disasters, many of which are amplified by climate change, requires the protection of emergency evacuation routes to permit evacuees safe passage. California has recognized the need through the AB 747 Planning and Zoning Law, which requires each county and city in California to update their - general plans to include safety elements from unreasonable risks associated with various hazards, specifically evacuation routes and their capacity, safety, and viability under a range of emergency scenarios. These routes must be identified in advance and maintained so they can support evacuations. Today, there is a lack of a centralized database of the identified routes or their general assessment. Consequently, this proposal responds to Caltrans’ research priority for “GIS Mapping of Emergency Evacuation Routes.†Specifically, the project objectives are: 1) create a centralized GIS database, by collecting and compiling available evacuation route GIS layers, and the safety eleme..., The project used the following public datasets: • Open Street Map. The team collected the road network arcs and nodes of the selected localities and the team will make public the graph used for each locality. • National Risk Index (NRI): The team used the NRI obtained publicly from FEMA at the census tract level. • American Community Survey (ACS): The team used ACS data to estimate the Social Vulnerability Index at the census block level. Then the author developed a measurement to estimate the road network performance risk at the node level, by estimating the Hansen accessibility index, betweenness centrality and the NRI. Create a set of CSV files with the risk for more than 450 localities in California, on around 18 natural hazards. I also have graphs of the RNP risk at the regional level showing the directionality of the risk., , # Data from: Improving public safety through spatial synthesis, mapping, modeling, and performance analysis of emergency evacuation routes in California localities

https://doi.org/10.5061/dryad.w9ghx3g0j

Description of the data and file structure

For this project’s analysis, the team obtained data from FEMA's National Risk Index, including the Social Vulnerability Index (SOVI).

To estimate SOVI, the team used data from the American Community Survey (ACS) to calculate SOVI at the census block level.

Using the graphs obtained from OpenStreetMap (OSM), the authors estimated the Hansen Accessibility Index (Ai) and the normalized betweenness centrality (BC) for each node in the graph.

The authors estimated the Road Network Performance (RNP) risk at the node level by combining NRI, Ai, and BC. They then grouped the RNP to determine the RNP risk at the regional level and generated the radial histogram. Finally, the authors calculated each ana...