California State Assembly district boundaries intended for the NEVI map.Data downloaded in October 2024 from https://gis.data.ca.gov/maps/b31d93f08c074753b89f8cbb0b8beed9/about.

Final approved map by the 2020 California Citizens Redistricting Commission for the California State Assembly; the authoritative and official delineations of the California State Assembly drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.80 Assembly districts have an ideal population of around 500,000 people each, and in consideration of population equality, the Commission chose to limit the population deviation range to as close to zero percent as practicable. With these districts, the Commission was able to respect many local communities of interest and group similar communities; however, it was more difficult to keep densely populated counties, cities, neighborhoods, and larger communities of interest whole due to the district size and correspondingly smaller number allowable in the population deviation percentage.

This is the last boundary change until the next redistricting following the 2030 Census. All of the districts now reflect the 2021 Citizens Redistricting Commission(CRC) plan. The only thing that will change is the members' names and parties as elections are held, appointments are made, or party affiliations change.Assembly Districts feature layer is updated as-needed and we expect to update it more regularly in the future.Schema:District: The district is the district number.Members: Members are the number of members in seat for office.FIRST_NAME: The first name is the first name of the Assembly member.LAST_NAME: The last name is the Assembly member's last name.PARTY: The party is the party is the the Assembly member represents.POPULATION: The population is the population of the district.DISTRICT_WEBSITE: The district website is the URL link to the district's website.PHOTO: The photo is a URL link to the Assembly member's photo.CONTACT_URL: The contact URL is a way to contact the individual Assembly members offices.CAPITOL_OFFICE: The capitol office is the address of the suite at the capitol building per Assembly member.MAILING_ADDRESS: The mailing address is the P.O. Box address for the Assembly members.DISTRICT_OFFICE_ADDRESS: The district office address is the address of the Assembly member's office in their respective districts.MEMBER_SUMMARY_WEBPAGE: The member summary webpage is the individual member's page on the Assembly website.Shapefile and data was derived from the We Draw the Lines and Census Data.

Polygon layers for the 2011 and 2022 Senate district boundaries and the 2022 Assembly district boundaries.

This web map of California legislative districts includes the geographically defined territories used for representation in the California State Assembly, California State Senate and the US House of Representatives from California. These three boundary layers are derived from the US Census Bureau's 2018 TIGER/Line database and are designed to overlay with the California Department of Education’s (CDE) education related GIS content.The 80 California State Assembly Districts represent the geographically defined territories used for electing members to the lower (house) chamber of the California State Legislature. The current state assembly boundaries were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020.The 40 state senate districts represent the geographically defined territories used for electing members to the upper (senate) chamber of the California State Legislature. The current state senate boundaries were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020.The 53 congressional districts within the State of California represent the geographically defined territories used for electing members to the U.S. House of Representatives. The current U.S. Congressional boundaries in California were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020

California State Assembly boundaries adopted for the June 2012 primary elections. Districts located within the County of San Diego were extracted and reprojected into SanGIS standard projection.Every 10 years, after the federal census, California must redraw the boundaries of its Congressional, State Senate, State Assembly, and State Board of Equalization districts, to reflect the new population data. Now those lines are drawn by the Commission. California voters authorized the creation of the Commission when they passed the Voters First Act, which appeared as Proposition 11 on the November 2008 general election ballot. Under the Act, the Commission is charged with drawing the boundaries of California’s Congressional, Senate, Assembly and Board of Equalization electoral districts.The commission has14 members from varied ethnic backgrounds and geographic locations in the state and includes five Democrats, five Republicans, and four Decline to State.http://wedrawthelines.ca.gov/

Final approved map by the 2020 California Citizens Redistricting Commission for the California State Senate; the authoritative and official delineations of the California State Senate drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.Each of the 40 Senate districts has an ideal population of nearly one million people and represents the largest state legislative districts in the nation. In consideration of population equality, the Commission chose to limit the population deviation as close to zero percent as practicable. Per the California Constitution, the Commission strived to nest two Assembly districts where practicable. However, higher ranking criteria made this difficult in practice. While the size of the Senate districts allowed the Commission to recognize broadly shared interests, these interests did not always overlap exactly with the interests of smaller communities recognized in the related Assembly districts. Based on the large number of people in each district, there were a variety of different interests that were balanced and included.

This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) System (MTS). The MTS represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. State Legislative Districts (SLDs) are the areas from which members are elected to state legislatures. The SLDs embody the upper (senate - SLDU) and lower (house - SLDL) chambers of the state legislature. Nebraska has a unicameral legislature, and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation. A unique three-character census code, identified by state participants, is assigned to each SLD within a state. States that had SLDU updates between the previous and current session include Georgia, Minnesota, Montana, North Carolina, North Dakota, Ohio, Washington, and Wisconsin. In Connecticut, Illinois, Louisiana, New Hampshire, Wisconsin, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDUs to cover the entirety of the state or state equivalent area. In the areas with no SLDUs defined, the code ""ZZZ"" has been assigned, which is treated as a single SLDU for purposes of data presentation. There are no SLDU TIGER/Line shapefiles for the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). The state legislative district boundaries reflect information provided to the Census Bureau by the states by May 31, 2024. Note: Michigan is required by court order to redraw their state senate districts. However, these new SLDUs were not drawn by May 31, 2024, and will not be used until the next SLDU elections in 2026.

State Assembly Districts with district boundaries, within the extent of Alameda County; districts have been updated to show 2011 redistricting changes. Boundaries represent voting districts (i.e., district designation for each address) and therefore may align with parcel boundaries in cases where parcels (and sometimes residences) are divided by the true city/district boundary.

The legislative districts contain the geographically defined territories used for representation in the California State Assembly, California State Senate and the U.S. House of Representatives from California. These three boundary layers were approved by the California Citizens Redistricting Commission in 2021 following the completion of the 2020 United States Census.

The authoritative and official final approved maps by the 2020 California Citizens Redistricting Commission for the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.

The 2023 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. State Legislative Districts (SLDs) are the areas from which members are elected to state legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by state participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, New Hampshire, Wisconsin, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation. The generarlized boundaries in this file are based on the most recent state legislative district boundaries collected by the Census Bureau for the 2022 election year and provided by state-level participants through the RDP.

This dataset is one from a series of district layers pertaining to California Assembly Districts, that are derived from the California State Assembly information. The following district layer is included in the series: assembly_districts: Current California Assembly Districts based on the new district boundaries enacted into state law on September 13, 2001, and signed into law on September 26, 2001 for use with the March 2002 primary election. The boundary has been updated as of 11/2011.

The 2020 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. State Legislative Districts (SLDs) are the areas from which members are elected to State legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by State participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, Maine, Maryland, Massachusetts, Michigan, Ohio, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation. The generalized boundaries in this file are based on the most recent state legislative district boundaries collected by the Census Bureau for the 2018 election year and provided by state-level participants through the RDP.

The 80 California State Assembly Districts represent the geographically defined territories used for electing members to the lower (house) chamber of the California State Legislature. The current state assembly boundaries were approved by the California Citizens Redistricting Commission in 2021 following the completion of the 2020 United States CensusSource California State Geoportal.

Boundaries determined by the 2020 California Citizens Redistricting Commission and derived from We Draw the Lines, released December 2021.Member names and contact information updated as-needed by the Board of Equalization.Final approved map by the 2020 California Citizens Redistricting Commission for the California State Board of Equalization Districts; the authoritative and official delineations of the California State Board of Equalization Districts drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.

The four Board of Equalization (BOE) districts have a population larger than most other states in the country. In consideration of population equality, the Commission chose to limit the population deviation to under 2%. The BOE is responsible for property tax programs, the alcoholic beverage tax, the tax on insurers, and the private railroad car tax, including conducting appraisals and audits of state-assessed public utility companies and railroad companies, and ensuring statewide uniformity in the assessment of properties by county assessors. Given this, the Commission recognized the relevant shared interests included business and economic interests. In addition, tax revenues are distributed to counties independent of electoral districts. The Commission’s BOE districts reflect a balancing of multiple requirements and interests, including maintaining, to the extent practicable, county, city, neighborhood, and community of interest boundaries. In particular, because the main mission of the BOE focuses on county tax assessment, the Commission attempted to keep counties whole in these districts.

The aquifer risk map is being developed to fulfill requirements of SB-200 and is intended to help prioritize areas where domestic wells and state small water systems may be accessing groundwater that does not meet primary drinking water standards (maximum contaminant level or MCL). In accordance with SB-200, the risk map is to be made available to the public and is to be updated annually starting January 1, 2021. The Fund Expenditure Plan states the risk map will be used by Water Boards staff to help prioritize areas for available SAFER funding.This layer contains several reference boundaries, including:California County boundariesCensus Tract boundaries with Disadvantaged Community Status (based on Median Household Income)California Assembly District boundariesCalifornia Senate District boundariesCalifornia Regional Water Board boundariesCV-SALTS priority groundwater basinsGroundwater Sustainability Agency boundariesGroundwater Unit boundaries

Description for i03_DAU_county_cnty2018 is as follows:Detailed Analysis Unit-(DAU) Convergence via County Boundary cnty18_1 for Cal-Fire, (See metadata for CAL-FIRE cnty18_1), State of California.The existing DAU boundaries were aligned with cnty18_1 feature class.Originally a collaboration by Department of Water Resources, Region Office personnel, Michael L. Serna, NRO, Jason Harbaugh - NCRO, Cynthia Moffett - SCRO and Robert Fastenau - SRO with the final merge of all data into a cohesive feature class to create i03_DAU_COUNTY_cnty24k09 alignment which has been updated to create i03_DAU_COUNTY_cnty18_1.This version was derived from a preexisting “dau_v2_105, 27, i03_DAU_COUNTY_cnty24k09” Detailed Analysis Unit feature class's and aligned with Cal-Fire's 2018 boundary.Manmade structures such as piers and breakers, small islands and coastal rocks have been removed from this version. Inlets waters are listed on the coast only.These features are reachable by County\DAU. This allows the county boundaries, the DAU boundaries and the State of California Boundary to match Cal-Fire cnty18_1.DAU BackgroundThe first investigation of California's water resources began in 1873 when President Ulysses S. Grant commissioned an investigation by Colonel B. S. Alexander of the U.S. Army Corps of Engineers. The state followed with its own study in 1878 when the State Engineer's office was created and filled by William Hammond Hall. The concept of a statewide water development project was first raised in 1919 by Lt. Robert B. Marshall of the U.S. Geological Survey.In 1931, State Engineer Edward Hyatt introduced a report identifying the facilities required and the economic means to accomplish a north-to-south water transfer. Called the "State Water Plan", the report took nine years to prepare. To implement the plan, the Legislature passed the Central Valley Act of 1933, which authorized the project. Due to lack of funds, the federal government took over the CVP as a public works project to provide jobs and its construction began in 1935.In 1945, the California Legislature authorized an investigation of statewide water resources and in 1947, the California Legislature requested that an investigation be conducted of the water resources as well as present and future water needs for all hydrologic regions in the State. Accordingly, DWR and its predecessor agencies began to collect the urban and agricultural land use and water use data that serve as the basis for the computations of current and projected water uses.The work, conducted by the Division of Water Resources (DWR’s predecessor) under the Department of Public Works, led to the publication of three important bulletins: Bulletin 1 (1951), "Water Resources of California," a collection of data on precipitation, unimpaired stream flows, flood flows and frequency, and water quality statewide; Bulletin 2 (1955), "Water Utilization and Requirements of California," estimates of water uses and forecasts of "ultimate" water needs; and Bulletin 3 (1957), "The California Water Plan," plans for full practical development of California’s water resources, both by local projects and a major State project to meet the State's ultimate needs. (See brief addendum below “The Development of Boundaries for Hydrologic Studies for the Sacramento Valley Region”)DWR subdivided California into study areas for planning purposes. The largest study areas are the ten hydrologic regions (HR), corresponding to the State’s major drainage basins. The next levels of delineation are the Planning Areas (PA), which in turn are composed of multiple detailed analysis units (DAU). The DAUs are often split by county boundaries, so are the smallest study areas used by DWR.The DAU/counties are used for estimating water demand by agricultural crops and other surfaces for water resources planning. Under current guidelines, each DAU/County has multiple crop and land-use categories. Many planning studies begin at the DAU or PA level, and the results are aggregated into hydrologic regions for presentation.Since 1950 DWR has conducted over 250 land use surveys of all or parts of California's 58 counties. Early land use surveys were recorded on paper maps of USGS 7.5' quadrangles. In 1986, DWR began to develop georeferenced digital maps of land use survey data, which are available for download. Long term goals for this program is to survey land use more frequently and efficiently using satellite imagery, high elevation digital imagery, local sources of data, and remote sensing in conjunction with field surveys.There are currently 58 counties and 278 DAUs in California.Due to some DAUs being split by county lines, the total number of DAU’s identifiable via DAU by County is 782.ADDENDUMThe Development of Boundaries for Hydrologic Studies for the Sacramento Valley Region[Detailed Analysis Units made up of a grouping of the Depletion Study Drainage Areas (DSA) boundaries occurred on the Eastern Foothills and Mountains within the Sacramento Region. Other DSA’s were divided into two or more DAU’s; for example, DSA 58 (Redding Basin) was divided into 3 DAU’s; 143,141, and 145. Mountain areas on both the east and west side of the Sacramento River below Shasta Dam went from ridge top to ridge top, or topographic highs. If available, boundaries were set adjacent to stream gages located at the low point of rivers and major creek drainages.Later, as the DAU’s were developed, some of the smaller watershed DSA boundaries in the foothill and mountain areas were grouped. The Pit River DSA was split so water use in the larger valleys (Alturas area, Big Valley, Fall River Valley, Hat Creek) could be analyzed. A change in the boundary of the Sacramento Region mountain area occurred at this time when Goose Lake near the Oregon State Line was included as part of the Sacramento Region.The Sacramento Valley Floor hydrologic boundary was at the edge of the alluvial soils and slightly modified to follow the water bearing sediments to a depth of 200 feet or more. Stream gages were located on incoming streams and used as an exception to the alluvial soil boundary. Another exception to the alluvial boundary was the inclusion of the foothills between Red Bluff and the Redding Basin. Modifications of the valley floor exterior boundary were made to facilitate analysis; some areas at the northern end of the valley followed section lines or other established boundaries.Valley floor boundaries, as originally shown in Bulletin 2, Water Utilization and Requirements of California, 1955 were based on physical topographic features such as ridges even if they only rise a few feet between basins and/or drainage areas. A few boundaries were based on drainage canals. The Joint DWR-USBR Depletion Study Drainage Areas (DSA) used drainage areas where topographic highs drained into one drainage basin. Some areas were difficult to study, particularly in areas transected by major rivers. Depletion Study Drainage Areas containing large rivers were separated into two DAU’s; one on each side of the river. This made it easier to analyze water source, water supply, and water use and drainage outflow from the DAU.Many of the DAUs that consist of natural drainage basins have stream gages located at outfall gates, which provided an accurate estimate of water leaving the unit. Detailed Analysis Units based on political boundaries or other criteria are much more difficult to analyze than those units that follow natural drainage basins.]END ADDENDUM*

The aquifer risk map is being developed to fulfill requirements of SB-200 and is intended to help prioritize areas where domestic wells and state small water systems may be accessing groundwater that does not meet primary drinking water standards (maximum contaminant level or MCL). In accordance with SB-200, the risk map is to be made available to the public and is to be updated annually starting January 1, 2021. The Fund Expenditure Plan states the risk map will be used by Water Boards staff to help prioritize areas for available SAFER funding.This layer contains several reference boundaries, including:California County boundariesCensus Tract boundaries with Disadvantaged Community Status (based on Median Household Income)California Assembly District boundariesCalifornia Senate District boundariesCalifornia Regional Water Board boundariesCV-SALTS priority groundwater basinsGroundwater Sustainability Agency boundariesGroundwater Unit boundaries

US Census American Community Survey (ACS) 2020, 5-year estimates of the key economic characteristics of State Assembly Legislative Districts (Lower) geographic level in Orange County, California. The data contains 397 fields for the variable groups E01: Employment status (universe: population 16 years and over, table X23, 7 fields); E02: Work status by age of worker (universe: population 16 years and over, table X23, 36 fields); E03: Commuting to work (universe: workers 16 years and over, table X8, 8 fields); E04: Travel time to work (universe: workers 16 years and over who did not work at home, table X8, 14 fields); E05: Number of vehicles available for workers (universe: workers 16 years and over in households, table X8, 8 fields); E06: Median age by means of transportation to work (universe: median age, workers 16 years and over, table X8, 7 fields); E07: Means of transportation to work by race (universe: workers 16 years and over, table X8, 64 fields); E08: Occupation (universe: civilian employed population 16 years and over, table X24, 53 fields); E09: Industry (universe: civilian employed population 16 years and over, table X24, 43 fields); E10: Class of worker (universe: civilian employed population 16 years and over, table X24, 19 fields); E11: Household income and earnings in the past 12 months (universe: total households, table X19, 37 fields); E12: Income and earnings in dollars (universe: inflation-adjusted dollars, tables X19-X20, 31 fields); E13: Family income in dollars (universe: total families, table X19, 17 fields); E14: Health insurance coverage (universe: total families, table X19, 17 fields); E15: Ratio of income to Poverty level (universe: total population for whom Poverty level is determined, table X17, 8 fields); E16: Poverty in population in the past 12 months (universe: total population for whom Poverty level is determined, table X17, 7 fields); E17: Poverty in households in the past 12 months (universe: total households, table X17, 9 fields); E18: Percentage of families and people whose income in the past 12 months is below the poverty level (universe: families, population, table X17, 8 fields), and; X19: Poverty and income deficit (dollars) in the past 12 months for families (universe: families with income below Poverty level in the past 12 months, table X17, 4 fields). The US Census geodemographic data are based on the 2020 TigerLines across multiple geographies. The spatial geographies were merged with ACS data tables. See full documentation at the OCACS project GitHub page (https://github.com/ktalexan/OCACS-Geodemographics).