The land register is the basis for the registration of property in Denmark and forms an important part of the administrative base in the public administration. The cadastre consists, conceptually, of the cadastral register, the cadastral map and the cadastral archive. The register contains information on areas, including, where appropriate, road or watercourse areas, listing conditions (e.g. agricultural properties, total immovable property or forest). The cadastral map is a digital, legal map work showing the registered property boundaries and road rights. The land register map also shows the forested areas, zones for beach protection and dune conservation. The Matrikel Archive contains, among other things, previously applicable cadastral maps, cadastral protocols and registered cadastral cases, including target information. The cadastral register and the cadastre are integrated into a single data model, where “Matricular data” is the core data element.

Cadastral data can be divided into three groups: Elements of the basic index, other elements and themes. The Basismatricle contains the elements of the cadastral process and they are important elements in determining the basic cadastral situation. Elements of the basic index: Cadastral, busy road, land plot, centroid point, dividing point, fixed point, boundary stone. Other elements contain administrative and cadastral areas which can be automatically derived from elements in the base cadastre. Thus, they are not directly part of the cadastral process, but can be used as support material in the process. Themes: Region, municipality, parish, owner low, manred, survey district. Finally, themes are elements that build on the basic cadastral situation, which is part of the cadastral process (land interest, majorat forest, stormfalls, forest conservation, beach protection, dune conservation, land contamination).

Cadastral Mapping Market Outlook

The global cadastral mapping market size was valued at approximately USD 4.2 billion in 2023 and is projected to reach around USD 7.9 billion by 2032, growing at a compound annual growth rate (CAGR) of 7.2% during the forecast period. This market growth can be attributed to increasing urbanization, rapid advancements in geospatial technologies, and the growing need for efficient land management systems across various regions.

The expansion of urban areas and the corresponding increase in the need for effective land management infrastructure are significant growth factors driving the cadastral mapping market. As urbanization accelerates globally, local governments and planning agencies require sophisticated tools to manage and record land ownership, boundaries, and property information. Enhanced geospatial technologies, including Geographic Information Systems (GIS) and remote sensing, are pivotal in facilitating accurate and efficient cadastral mapping, thus contributing to market growth.

Another key growth factor is the rising demand for infrastructure development. As nations invest in large-scale infrastructure projects such as roads, railways, and smart cities, there is an increased need for precise land data to ensure the proper allocation of resources and to avoid legal disputes. Cadastral mapping provides the critical data needed for these projects, hence its demand is surging. Additionally, governments worldwide are increasingly adopting digital platforms to streamline land administration processes, further propelling the market.

Furthermore, the agricultural sector is also significantly contributing to the growth of the cadastral mapping market. Modern agriculture relies heavily on accurate land parcel information for planning and optimizing crop production. By integrating cadastral maps with other geospatial data, farmers can improve land use efficiency, monitor crop health, and enhance yield predictions. This integration is particularly valuable in precision farming, which is becoming more prevalent as the world's population grows and the demand for food increases.

Regionally, Asia Pacific is expected to witness the highest growth in the cadastral mapping market. Factors such as rapid urbanization, extensive infrastructure development projects, and the need for improved land management are driving the demand in this region. Moreover, governments in countries like India and China are investing heavily in creating digital land records and implementing smart city initiatives, which further boosts the market. The North American and European markets are also substantial, driven by the advanced technological infrastructure and well-established land administration systems.

Component Analysis

The cadastral mapping market can be segmented by component into software, hardware, and services. The software segment holds a significant share in this market, driven by the increasing adoption of advanced GIS and mapping software solutions. These software solutions enable accurate land parcel mapping, data analysis, and integration with other geospatial data systems, making them indispensable tools for cadastral mapping. Companies are continuously innovating to provide more intuitive and comprehensive software solutions, which is expected to fuel growth in this segment.

Hardware components, including GPS devices, drones, and other surveying equipment, are also critical to the cadastral mapping market. The hardware segment is expected to grow steadily as technological advancements improve the accuracy and efficiency of these devices. Innovations such as high-resolution aerial imaging and LIDAR technology are enhancing the capabilities of cadastral mapping hardware, allowing for more detailed and precise data collection. This segment is particularly essential for field surveying and data acquisition, forming the backbone of cadastral mapping projects.

The services segment encompasses a wide range of offerings, including consulting, implementation, and maintenance services. Professional services are vital for the successful deployment and operation of cadastral mapping systems. Governments and private sector organizations often rely on specialized service providers to implement these systems, train personnel, and ensure ongoing support. As the complexity of cadastral mapping projects increases, the demand for expert services is also expected to rise, contributing to the growth of this segment.

Integration services are another critical component within the

Data set for providing cadastral maps in digital form in DXF format. The data comes from the ISKN database (Cadastre Information System). The cadastral map includes a semi-final and descriptive folder. The location contains the boundaries of plots, cadastral areas and administrative units, building perimeters and point fields. The descriptive elements include text inscriptions (par-customs numbers, geographical nomenclature, etc.), map marks (marks of land types, etc.) and lines (borders of protected areas, etc.). When converting data into DXF format, some digital map data (information about point number and position point quality code, symbols on lines, etc.) are lost. The data set is provided as open data (CC-BY 4.0 license). The data is based on ISKN (Cadastre Information System). The cadastral map is provided along the cadastral territories in the JTSK coordinate system (EPSG:5514). There are only areas with a cadastral map in digital form (to 10. 01. 2022 is 97.82 % of the territory of the Czech Republic, i.e. 77 150.84 km²). Data is provided in DXF format. Data is compressed for download (ZIP). More cadastral Act 256/2013 Coll., Decree on the Land Registry No 357/2013 Coll., Decree on the Provision of Data No. 358/2013 Coll., as amended.

Dataset for providing complete cadastral map content in digital form. The cadastral map includes a semi-descriptive and descriptive component. The position paper contains the boundaries of parcels, cadastral areas and administrative units, districts of buildings and points fields. Additional information (point number and quality code) is provided in the dates for the semi-finding points. Descriptive elements include text inscriptions (parcel numbers, geographical nomenclature, etc.), map marks (marks of land types, etc.) and lines (limits of protected areas, etc.). The data set is provided as open data (CC-BY 4.0 license). The data is based on the ISKN (The Land Register Information System). The cadastral map is provided in cadastral areas in the JTSK coordinate system (EPSG:5514). Only territories with cadastral map in digital form are available (to 02. 01. 2023 is 98.35 % of the territory of the Czech Republic, i.e. 77 565.36 km²). Data are provided in text format VFK (Czech National Standard). For downloading the data is compressed (ZIP). The description of the format is published on the website of the Czech Office of Surveying and Cadastral. More cadastral act 256/2013 Coll., Land Register Decree No. 357/2013 Coll., Decree on the provision of data No. 358/2013 Coll., as amended.

Property boundaries represent the extent of ownership of an address in line with NSW Valuer General for the purposes of address verification and rating. The spatial layer is derived from land parcel boundaries (cadastre) originally supplied by NSW Spatial Services who remain the source of cadastral information. See SiX mapsThis spatial layer has been significantly changed and maintained by City of Sydney Spatial Services. This layer is not survey accurate.Geoservice API disabled, but geojson and download permitted.

Collection of digitised maps over Queensland at various scales 1841–2005, including cadastral maps which show property boundaries, property descriptions and land tenure, and some other related miscellaneous maps. Some are annotated and quality of scans varies. The majority of map series include key maps.

Please note: Detailed instructions on how to access each of the scanned maps can be found on the following page http://www.qld.gov.au/recreation/arts/heritage/museum-of-lands/maps-plans/cadastral/

The property cadastral boundaries include lot lines, property lines and their dimensions (lengths). Other related datasets can be found by filtering on the property keyword. Data currencyThis data in City systems is updated frequently in the normal course of business, however priorities and resources determine how fast a change in reality is reflected in the database. The extract on this website is updated weekly. Data accuracyMuch of the City's land base is created using survey accuracy however some features are not as precise.

description: This data has been collected by the U.S. Bureau of Land Management (BLM) in New Mexico at the New Mexico State Office. The initial data source is the statewide Public Land Survey System (PLSS) coverage for the state of New Mexico, generated at the BLM New Mexico State Office. Additional data was onscreen-digitized from BLM Cadastral Survey Plats and Master Title Plats, or tablet-digitized from 1:24,000 paper maps. This revision reflects boundary adjustments made in the Albuquerque area to more accurately reflect boundaries as depicted on USGS 1:24,000 topographic maps. Note for Shapefiles: Shapefiles have been created from coverages using the "Export Coverage to Shapefile" function in ArcGIS 8.3. All occurrences of "#" and "-" in INFO item names are replaced with an underscore character. This includes COVER# and COVER-ID, which become "COVER_" and "COVER_ID". Additionally, the Shapefile format only allows 10 characters in item names, so long item names are truncated. To avoid duplicate names, the items are truncated and assigned consecutive numbers. For example, in a coverage called CITY_STREET the items "CITY_STREET#" and "CITY_STREET-ID" become "CITY_STRE" and "CITY_STR_1" .; abstract: This data has been collected by the U.S. Bureau of Land Management (BLM) in New Mexico at the New Mexico State Office. The initial data source is the statewide Public Land Survey System (PLSS) coverage for the state of New Mexico, generated at the BLM New Mexico State Office. Additional data was onscreen-digitized from BLM Cadastral Survey Plats and Master Title Plats, or tablet-digitized from 1:24,000 paper maps. This revision reflects boundary adjustments made in the Albuquerque area to more accurately reflect boundaries as depicted on USGS 1:24,000 topographic maps. Note for Shapefiles: Shapefiles have been created from coverages using the "Export Coverage to Shapefile" function in ArcGIS 8.3. All occurrences of "#" and "-" in INFO item names are replaced with an underscore character. This includes COVER# and COVER-ID, which become "COVER_" and "COVER_ID". Additionally, the Shapefile format only allows 10 characters in item names, so long item names are truncated. To avoid duplicate names, the items are truncated and assigned consecutive numbers. For example, in a coverage called CITY_STREET the items "CITY_STREET#" and "CITY_STREET-ID" become "CITY_STRE" and "CITY_STR_1" .

This layer provides metadata about cadastral surveys along with reference points indicating the location of the survey.

A cadastral survey determines and describes the spatial extent (including boundaries) of interest of land within New Zealand. Each survey is allocated a unique reference number (that prior to Landonline included reference to the land district.

This data provides details that identify the type of survey, the purpose, description and key dates relating to the survey.

BLM Alaska PLSS Intersected: This dataset represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is cadastral survey records housed by the BLM supplemented with local records and geographic control coordinates from states, counties as well as other federal agencies such as the USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-Attribute section of this metadata describes these components in greater detail.

Data set for providing cadastral maps in digital form in DXF format. The data comes from the ISKN database (Cadastre Information System). The cadastral map includes a semi-final and descriptive folder. The location contains the boundaries of plots, cadastral areas and administrative units, building perimeters and point fields. The descriptive elements include text inscriptions (par-customs numbers, geographical nomenclature, etc.), map marks (marks of land types, etc.) and lines (borders of protected areas, etc.). When converting data into DXF format, some digital map data (information about point number and position point quality code, symbols on lines, etc.) are lost. The data set is provided as open data (CC-BY 4.0 license). The data is based on ISKN (Cadastre Information System). The cadastral map is provided along the cadastral territories in the JTSK coordinate system (EPSG:5514). There are only areas with a cadastral map in digital form (to 10. 01. 2022 is 97.82 % of the territory of the Czech Republic, i.e. 77 150.84 km²). Data is provided in DXF format. Data is compressed for download (ZIP). More cadastral Act 256/2013 Coll., Decree on the Land Registry No 357/2013 Coll., Decree on the Provision of Data No. 358/2013 Coll., as amended.

This data set depicts federal lands having restrictions on access or activities -- that is, lands mangaed by the National Park Service, Defense Department, or Energy Department -- in western North America. The data set was created by reformatting and merging state- and province-based ownership data layers originally acquired from diverse sources (including state GAP programs, USBLM state offices and other sources). For each original dataset 3 additional fields, "Pub_Pvt", "CA_OWN", and "SOURCE" were added and populated based on the specific ownership information contained in the source data. The original coverages were then merged based on the "CA_OWN" field. Finally, NPS, DOD, and DOE lands were selected out of the ownership layer. All work was completed in AcMap 8.3. This product and all source data are available online from SAGEMAP: http://sagemap.wr.usgs.gov.

These are the cadastral reference features that provide the basis and framework for parcel mapping and for other mapping. This feature data set contains PLSS and Other Survey System data. The other survey systems include subdivision plats and those types of survey reference systems. This feature data set also include feature classes to support the special conditions in Ohio. This data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is cadastral survey records housed by the BLM supplemented with local records and geographic control coordinates from states, counties as well as other federal agencies such as the USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-Attribute section of this metadata describes these components in greater detail.

This parcels polygons feature class represents current city parcels within the City of Los Angeles. It shares topology with the Landbase parcel lines feature class. The Mapping and Land Records Division of the Bureau of Engineering, Department of Public Works provides the most current geographic information of the public right of way, ownership and land record information. The legal boundaries are determined on the ground by license surveyors in the State of California, and by recorded documents from the Los Angeles County Recorder's office and the City Clerk's office of the City of Los Angeles. Parcel and ownership information are available on NavigateLA, a website hosted by the Bureau of Engineering, Department of Public Works.Associated information about the landbase parcels is entered into attributes. Principal attributes include:PIN and PIND: represents the unique auto-generated parcel identifier and key to related features and tables. This field is related to the LA_LEGAL, LA_APN and LA_HSE_NBR tables. PIN contains spaces and PIND replaces those spaces with a dash (-).LA_LEGAL - Table attributes containing legal description. Principal attributes include the following:TRACT: The subdivision tract number as recorded by the County of Los AngelesMAP_REF: Identifies the subdivision map book reference as recorded by the County of Los Angeles.LOT: The subdivision lot number as recorded by the County of Los Angeles.ENG_DIST: The four engineering Districts (W=Westla, C=Central, V= Valley and H=Harbor).CNCL_DIST: Council Districts 1-15 of the City of Los Angeles. OUTLA means parcel is outside the City.LA_APN- Table attributes containing County of Los Angeles Assessors information. Principal attributes include the following:BPP: The Book, Page and Parcel from the Los Angeles County Assessors office. SITUS*: Address for the property.LA_HSE_NBR - Table attributes containing housenumber information. Principal attributes include the following:HSE_ID: Unique id of each housenumber record.HSE_NBR: housenumber numerical valueSTR_*: Official housenumber addressFor a complete list of attribute values, please refer to Landbase_parcel_polygons_data_dictionary.Landbase parcels polygons data layer was created in geographical information systems (GIS) software to display the location of the right of way. The parcels polygons layer delineates the right of way from Landbase parcels lots. The parcels polygons layer is a feature class in the LACityLandbaseData.gdb Geodatabase dataset. The layer consists of spatial data as a polygon feature class and attribute data for the features. The area inside a polygon feature is a parcel lot. The area outside of the parcel polygon feature is the right of way. Several polygon features are adjacent, sharing one line between two polygons. For each parcel, there is a unique identifier in the PIND and PIN fields. The only difference is PIND has a dash and PIN does not. The types of edits include new subdivisions and lot cuts. Associated legal information about the landbase parcels lots is entered into attributes. The landbase parcels layer is vital to other City of LA Departments, by supporting property and land record operations and identifying legal information for City of Los Angeles. The landbase parcels polygons are inherited from a database originally created by the City's Survey and Mapping Division. Parcel information should only be added to the Landbase Parcels layer if documentation exists, such as a Deed or a Plan approved by the City Council. When seeking the definitive description of real property, consult the recorded Deed or Plan.List of Fields:ID: A unique numeric identifier of the polygon. The ID value is the last part of the PIN field value.ASSETID: User-defined feature autonumber.MAPSHEET: The alpha-numeric mapsheet number, which refers to a valid B-map or A-map number on the Cadastral grid index map. Values: • B, A, -5A - Any of these alpha-numeric combinations are used, whereas the underlined spaces are the numbers. An A-map is the smallest grid in the index map and is used when there is a large amount of spatial information in the map display. There are more parcel lines and annotation than can fit in the B-map, and thus, an A-map is used. There are 4 A-maps in a B-map. In areas where parcel lines and annotation can fit comfortably in an index map, a B-map is used. The B-maps are at a scale of 100 feet, and A-maps are at a scale of 50 feet.OBJECTID: Internal feature number.BPPMAP_REFTRACTBLOCKMODLOTARBCNCL_DIST: LA City Council District. Values: • (numbers 1-15) - Current City Council Member for that District can be found on the mapping website http://navigatela.lacity.org/navigatela, click Council Districts layer name, under Boundaries layer group.SHAPE: Feature geometry.BOOKPAGEPARCELPIND: The value is a combination of MAPSHEET and ID fields, creating a unique value for each parcel. The D in the field name PIND, means "dash", and there is a dash between the MAPSHEET and ID field values. This is a key attribute of the LANDBASE data layer. This field is related to the APN and HSE_NBR tables.ENG_DIST: LA City Engineering District. The boundaries are displayed in the Engineering Districts index map. Values: • H - Harbor Engineering District. • C - Central Engineering District. • V - Valley Engineering District. • W - West LA Engineering District.PIN: The value is a combination of MAPSHEET and ID fields, creating a unique value for each parcel. There are spaces between the MAPSHEET and ID field values. This is a key attribute of the LANDBASE data layer. This field is related to the APN and HSE_NBR tables.

Cadaster map – Latvia is designed as a digital overview map, using digital cadastral survey data of real estate objects in the form of vectors. It covers the entire territory of the Republic of Latvia and serves as an overview of the mutual location of the depicted objects in the territory. The right-angled grid of the cadastre map corresponds to the geodetic coordinate system LKS-92 TM of Latvia in 1992.. The cadastral map shall be maintained in accordance with the accuracy of the cadastral survey data. The cadastral map shall indicate the cadastral designation of the cadastre object and display the following spatial data: * the boundaries of a land parcel and a part of a land parcel; * boundary points of a land parcel and a part of a land parcel; * the outer contour and location of the structure in the land unit; * the boundary and identifier of the servitude territory. Current data on cadastre objects – generally accessible information – are published in the form of open data. No data is available in the form of open data that contains restricted access information (e.g. on objects important for national security and national defence). More detailed information on the Cadastre Information System is available here

This layer provides the latest bearing (direction) and/or distance for cadastral boundaries.

When a cadastral survey is undertaken the relationship between boundary and non-boundary marks is ascertained or measured. • This commonly is in the form or a vector (bearing and distance), but occasionally just one component. • Some relationships are defined as arcs. In this data layer, the arc length is recorded in the distance field and a separate record holds the chord.

Only observations that have been captured in Landonline are available. This includes vectors that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats.

This dataset combines Brisbane City Council property information with the Queensland Government Digital Cadastral Database (DCDB) to show property holdings in Brisbane City Council area.

A property holding is a Council-defined and managed information entity. Its boundaries are generally based on land parcels. A property holding may consist of one or multiple land parcels.

The Digital Cadastral Database (DCDB) is the spatial representation of every current parcel of land in Queensland, and its legal Lot on Plan description and relevant attributes. It provides the map base for systems dealing with land related information. The DCDB is considered to be the point of truth for the graphical representation of property boundaries. It is not the point of truth for the legal property boundary or related attribute information, this will always be the plan of survey or the related titling information and administrative data sets.

These parcel boundaries represent legal descriptions of property ownership, as recorded in various public documents in the local jurisdiction. The boundaries are intended for cartographic use and spatial analysis only, and not for use as legal descriptions or property surveys. Tax parcel boundaries have not been edge-matched across municipal boundaries.

Data set for providing cadastral maps in digital form in DXF format. The data comes from the ISKN database (Cadastre Information System). The cadastral map includes a semi-final and descriptive folder. The location contains the boundaries of plots, cadastral areas and administrative units, building perimeters and point fields. The descriptive elements include text inscriptions (par-customs numbers, geographical nomenclature, etc.), map marks (marks of land types, etc.) and lines (borders of protected areas, etc.). When converting data into DXF format, some digital map data (information about point number and position point quality code, symbols on lines, etc.) are lost. The data set is provided as open data (CC-BY 4.0 license). The data is based on ISKN (Cadastre Information System). The cadastral map is provided along the cadastral territories in the JTSK coordinate system (EPSG:5514). There are only areas with a cadastral map in digital form (to 10. 01. 2022 is 97.82 % of the territory of the Czech Republic, i.e. 77 150.84 km²). Data is provided in DXF format. Data is compressed for download (ZIP). More cadastral Act 256/2013 Coll., Decree on the Land Registry No 357/2013 Coll., Decree on the Provision of Data No. 358/2013 Coll., as amended.

This dataset is available on Brisbane City Council’s open data website – data.brisbane.qld.gov.au. The site provides additional features for viewing and interacting with the data and for downloading the data in various formats.

This dataset combines Brisbane City Council property information with the Queensland Government Digital Cadastral Database (DCDB) in Brisbane City Council area.

Land Parcels are the building blocks of Council properties. Land parcels (also called lots) are mapped and the title details shown on a Plan of Subdivision. The parcel is a graphical representation of surveyed boundaries together with identifiers such as Lot/Plan description and house numbers.

The Digital Cadastral Database (DCDB) is the spatial representation of every current parcel of land in Queensland, and its legal Lot on Plan description and relevant attributes. It provides the map base for systems dealing with land related information. The DCDB is considered to be the point of truth for the graphical representation of property boundaries. It is not the point of truth for the legal property boundary or related attribute information, this will always be the plan of survey or the related titling information and administrative data sets.

Warning. Downloading this entire dataset in shapefile format exceeds the current 2GB download limit set by ESRI. Information from ESRI has the following suggestions. Consider the following options: Output to a file geodatabase instead of a shapefile or Process the data in sections.