Chart and table of population level and growth rate for the state of California from 1900 to 2024.

Final approved map by the 2020 California Citizens Redistricting Commission for California's United States Congressional Districts; the authoritative and official delineations of California's United States Congressional Districts drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.Each of the 52 Congressional districts apportioned to California have an ideal population of 760,066, and the Commission adhered to federal constitutional mandates by requiring a district population deviation of no more than +/- one person. These districts also posed some of the Commission’s biggest challenges, and, because of strict population equality requirements, resulted in many more splits of counties, cities, neighborhoods, and communities of interest compared to State Assembly or Senate plans.

Counties in California intended for the NEVI Map.Data downloaded in May 2021 from https://www.census.gov/geographies/mapping-files/time-series/geo/tiger-line-file.2021.html#list-tab-VGDZBC72KXZ7CWIQNY.

For the past several censuses, the Census Bureau has invited people to self-respond before following up in-person using census takers. The 2010 Census invited people to self-respond predominately by returning paper questionnaires in the mail. The 2020 Census allows people to self-respond in three ways: online, by phone, or by mail. The 2020 Census self-response rates are self-response rates for current census geographies. These rates are the daily and cumulative self-response rates for all housing units that received invitations to self-respond to the 2020 Census. The 2020 Census self-response rates are available for states, counties, census tracts, congressional districts, towns and townships, consolidated cities, incorporated places, tribal areas, and tribal census tracts. The Self-Response Rate of Los Angeles County is 65.1% for 2020 Census, which is slightly lower than 69.6% of California State rate. More information about these data are available in the Self-Response Rates Map Data and Technical Documentation document associated with the 2020 Self-Response Rates Map or review our FAQs. Animated Self-Response Rate 2010 vs 2020 is available at ESRI site SRR Animated Maps and can explore Census 2020 SRR data at ESRI Demographic site Census 2020 SSR Data. Following Demographic Characteristics are included in this data and web maps to visualize their relationships with Census Self-Response Rate (SRR)..1. Population Density2. Poverty Rate3. Median Household income4. Education Attainment5. English Speaking Ability6. Household without Internet Access7. Non-Hispanic White Population8. Non-Hispanic African-American Population9. Non-Hispanic Asian Population10. Hispanic Population

The 1998 Dress Rehearsal was conducted as a prelude to the United States Census of Population and Housing, 2000, in the following locations: (1) Columbia, South Carolina, and surrounding areas, including the town of Irmo and the counties of Chester, Chesterfield, Darlington, Fairfield, Kershaw, Lancaster, Lee, Marlboro, Newberry, Richland, and Union, (2) Sacramento, California, and (3) Menominee County, Wisconsin, including the Menominee American Indian Reservation. This collection contains map files showing various levels of geography (in the form of Census Tract Outline Maps, Voting District/State Legislative District Outline Maps, and County Block Maps), TIGER/Line digital files, and Corner Point files for the Census 2000 Dress Rehearsal sites. The Corner Point data files contain the bounding latitude and longitude coordinates for each individual map sheet of the 1998 Dress Rehearsal Public Law (P.L.) 94-171 map products. These files include a sheet identifier, minimum and maximum longitude, minimum and maximum latitude, and the map scale (integer value) for each map sheet. The latitude and longitude coordinates are in decimal degrees and expressed as integer values with six implied decimal places. There is a separate Corner Point File for each of the three map types: County Block Map, Census Tract Outline Map, and Voting District/State Legislative District Outline Map. Each of the three map file types is provided in two formats: Portable Document Format (PDF), for viewing, and Hewlett-Packard Graphics Language (HP-GL) format, for plotting. The County Block Maps show the greatest detail and the most complete set of geographic information of all the maps. These large-scale maps depict the smallest geographic entities for which the Census Bureau presents data -- the census blocks -- by displaying the features that delineate them and the numbers that identify them. These maps show the boundaries, names, and codes for American Indian/Alaska Native areas, county subdivisions, places, census tracts, and, for this series, the geographic entities that the states delineated in Phase 2, Voting District Project, of the Redistricting Data Program. The HP-GL version of the County Block Maps is broken down into index maps and map sheets. The map sheets cover a small area, and the index maps are composed of multiple map sheets, showing the entire area. The intent of the County Block Map series is to provide a map for each county on the smallest possible number of map sheets at the maximum practical scale, dependent on the area size of the county and the density of the block pattern. The latter affects the display of block numbers and feature identifiers. The Census Tract Outline Maps show the boundaries and numbers of census tracts, and name the features underlying the boundaries. These maps also show the boundaries and names of counties, county subdivisions, and places. They identify census tracts in relation to governmental unit boundaries. The mapping unit is the county. These large-format maps are produced to support the P.L. 94-171 program and all other 1998 Dress Rehearsal data tabulations. The Voting District/State Legislative District Outline Maps show the boundaries and codes for voting districts as delineated by the states in Phase 2, Voting District Project, of the Redistricting Data Program. The features underlying the voting district boundaries are shown, as well as the names of these features. Additionally, for states that submit the information, these maps show the boundaries and codes for state legislative districts and their underlying features. These maps also show the boundaries of and names of American Indian/Alaska Native areas, counties, county subdivisions, and places. The scale of the district maps is optimized to keep the number of map sheets for each area to a minimum, but the scale and number of map sheets will vary by the area size of the county and the voting districts and state legislative districts delineated by the states. The Census 2000 Dress Rehearsal TIGER/Line Files consist of line segments representing physical features and governmental and statistical boundaries. The files contain information distributed over a series of record types for the spatial objects of a county. These TIGER/Line Files are an extract of selected geographic and cartographic information from the Census TIGER (Topological

This viewer contains data directly from the U.S. Census Bureau. Use this map viewer to identify 2020 Census tract, block group, or block at a location. Map is centered on the City of Long Beach and shows the City boundary as recorded in the Census incorporated places layer. Data source: https://www.census.gov/data/developers/data-sets/TIGERweb-map-service.htmlAbout Census Tracts: https://www.census.gov/programs-surveys/geography/about/glossary.html#par_textimage_13About Census Block Groups: https://www.census.gov/programs-surveys/geography/about/glossary.html#par_textimage_4About Census Blocks: https://www.census.gov/programs-surveys/geography/about/glossary.html#par_textimage_5

In 2023, the resident population of California was ***** million. This is a slight decrease from the previous year, with ***** million people in 2022. This makes it the most populous state in the U.S. Californian demographics Along with an increase in population, California’s gross domestic product (GDP) has also been increasing, from *** trillion U.S. dollars in 2000 to **** trillion U.S. dollars in 2023. In the same time period, the per-capita personal income has almost doubled, from ****** U.S. dollars in 2000 to ****** U.S. dollars in 2022. In 2023, the majority of California’s resident population was Hispanic or Latino, although the number of white residents followed as a close second, with Asian residents making up the third-largest demographic in the state. The dark side of the Golden State While California is one of the most well-known states in the U.S., is home to Silicon Valley, and one of the states where personal income has been increasing over the past 20 years, not everyone in California is so lucky: In 2023, the poverty rate in California was about ** percent, and the state had the fifth-highest rate of homelessness in the country during that same year, with an estimated ** homeless people per 10,000 of the population.

This layer was created for use in the Aquifer Risk Map to provide summarized water quality risk data for domestic wells and state small water systems per census area (tract and block group). For more detailed descriptions of all data layers within the Aquifer Risk Map, refer to the Aquifer Risk Map Web Map page.This layer contains census block group and tract boundaries joined with:-2021 ACS Median Household Income (table B19013 column 001E - estimates only)-2021 ACS Race/Ethnicity data (table B03002 multiple columns - estimates only)-2023 Aquifer Risk Map count of total and high risk domestic wells and state small water systems per census area

This web map displays the California Department of Education's (CDE) core set of geographic data layers. This content represents the authoritative source for all statewide public school site locations and school district service areas boundaries for the 2018-19 academic year. The map also includes school and district layers enriched with student demographic and performance information from the California Department of Education's data collections. These data elements add meaningful statistical and descriptive information that can be visualized and analyzed on a map and used to advance education research or inform decision making.

The 2020 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some states and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

This collection provides 100-percent data from the Census 2000 Dress Rehearsal conducted in 1998 in the following locations: (1) Columbia, South Carolina, and surrounding areas, including the town of Irmo and the counties of Chester, Chesterfield, Darlington, Fairfield, Kershaw, Lancaster, Lee, Marlboro, Newberry, Richland, and Union, (2) Sacramento, California, and (3) Menominee County, Wisconsin, including the Menominee American Indian Reservation. The collection includes data on population, race, Hispanic/Latino origin, age, sex, marital status, family type and presence of own children, household relationship, household type and size, and group quarters. There are 104 population (P) and 42 housing (H) tables that provide data down to the block level. There are 29 additional population tables that provide data down to the census tract level. Also provided are accompanying map files, including Census Block and Census Tract Maps, in two formats, Portable Document Format (PDF) for viewing and Hewlett-Packard Graphics Language (HP-GL) for plotting large-scale maps. The Corner Point files contain the bounding latitude and longitude coordinates for each individual map sheet of the 1998 Dress Rehearsal 100-Percent Summary Files map products.

This web app map shows Census 2020 self-response rates in California. The data reflects the U.S. Census Bureau's Jan. 29, 2021 update. For more information about the California Complete Count - Census 2020 effort, go to census.ca.gov.

The 2023 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some states and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Population Estimate, Total, Not Hispanic or Latino, White Alone (5-year estimate) in Sierra County, CA was 2426.00000 Persons in January of 2023, according to the United States Federal Reserve. Historically, Population Estimate, Total, Not Hispanic or Latino, White Alone (5-year estimate) in Sierra County, CA reached a record high of 3042.00000 in January of 2010 and a record low of 2426.00000 in January of 2023. Trading Economics provides the current actual value, an historical data chart and related indicators for Population Estimate, Total, Not Hispanic or Latino, White Alone (5-year estimate) in Sierra County, CA - last updated from the United States Federal Reserve on September of 2025.

This EnviroAtlas dataset is a summary of key demographic groups for the EnviroAtlas community. This dataset was produced by the US EPA to support research and online mapping activities related to EnviroAtlas. EnviroAtlas (https://www.epa.gov/enviroatlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) or as an EnviroAtlas map service. Additional descriptive information about each attribute in this dataset can be found in its associated EnviroAtlas Fact Sheet (https://www.epa.gov/enviroatlas/enviroatlas-fact-sheets).

This EnviroAtlas dataset is a summary of key demographic groups for the EnviroAtlas community. This dataset was produced by the US EPA to support research and online mapping activities related to EnviroAtlas. EnviroAtlas (http://enviroatlas.epa.gov/EnviroAtlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) or as an EnviroAtlas map service. Additional descriptive information about each attribute in this dataset can be found in its associated EnviroAtlas Fact Sheet (https://www.epa.gov/enviroatlas/enviroatlas-fact-sheets).

For the past several censuses, the Census Bureau has invited people to self-respond before following up in-person using census takers. The 2010 Census invited people to self-respond predominately by returning paper questionnaires in the mail. The 2020 Census allows people to self-respond in three ways: online, by phone, or by mail.The 2020 Census self-response rates are self-response rates for current census geographies. These rates are the daily and cumulative self-response rates for all housing units that received invitations to self-respond to the 2020 Census. The 2020 Census self-response rates are available for states, counties, census tracts, congressional districts, towns and townships, consolidated cities, incorporated places, tribal areas, and tribal census tracts.The Self-Response Rate of Los Angeles County is 65.1% for 2020 Census, which is slightly lower than 69.6% of California State rate.More information about these data is available in the Self-Response Rates Map Data and Technical Documentation document associated with the 2020 Self-Response Rates Map or review FAQs.Animated Self-Response Rate 2010 vs 2020 is available at ESRI site SRR Animated Maps and can explore Census 2020 SRR data at ESRI Demographic site Census 2020 SSR Data.Following Demographic Characteristics are included in this data and web maps to visualize their relationships with Census Self-Response Rate (SRR).1. Population Density: 2020 Population per square mile,2. Poverty Rate: Percentage of population under 100% FPL,3. Median Household income: Based on countywide median HH income of $71,538.4. Highschool Education Attainment: Percentage of 18 years and older population without high school graduation.5. English Speaking Ability: Percentage of 18 years and older population with less or none English speaking ability. 6. Household without Internet Access: Percentage of HH without internet access.7. Non-Hispanic White Population: Percentage of Non-Hispanic White population.8. Non-Hispanic African-American Population: Percentage of Non-Hispanic African-American population.9. Non-Hispanic Asian Population: Percentage of Non-Hispanic Asian population.10. Hispanic Population: Percentage of Hispanic population.

California Health Maps is the pdf result of an interactive mapping tool of health data for geographies beyond the county level in California. The interactive tools allows users to map cancer incidence for 12 of the most common invasive cancer sites and filter by sex and race/ethnicity. Link - https://www.californiahealthmaps.org/

Final approved map by the 2020 California Citizens Redistricting Commission for the California State Assembly; the authoritative and official delineations of the California State Assembly drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.80 Assembly districts have an ideal population of around 500,000 people each, and in consideration of population equality, the Commission chose to limit the population deviation range to as close to zero percent as practicable. With these districts, the Commission was able to respect many local communities of interest and group similar communities; however, it was more difficult to keep densely populated counties, cities, neighborhoods, and larger communities of interest whole due to the district size and correspondingly smaller number allowable in the population deviation percentage.

Web map containing various layers to be used as reference in Experience Builder. It will serve as a one-stop tool for waste hauler contractors working with Los Angeles County Department of Public Works, Environmental Programs Division, to identify customers that are eligible for fee waivers due to their property falling within areas deemed to be too low in population or too high in elevation; these are conditions used to identify areas that may be too prohibitively costly to provide organics recovery programs due to them being in rural or remote areas.The Experience Builder page, https://experience.arcgis.com/experience/df8689f7d5964f48a5390f6f937533d2 (that references this web map), was created to cross-reference qualifying low-population/high elevation census tracts with various residential franchise, garbage disposal district, and commercial franchise waste collection service areas in Los Angeles County and to assist haulers in providing Public Works with the number of waste generators that are located on each census tract. This information will assist Public Works with applying for SB1383 low population and/or high elevation waivers for these census tracts. More information regarding SB1383 can be found at California Legislative Information (https://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=201520160SB1383)For inquiries about how SB 1383 impacts Los Angeles County, please contact Kawsar Vazifdar, (626) 458-3514.