The California Department of Forestry and Fire Protection's Fire and Resource Assessment Program (FRAP) annually maintains and distributes an historical wildland fire perimeter dataset from across public and private lands in California. The GIS data is developed with the cooperation of the United States Forest Service Region 5, the Bureau of Land Management, California State Parks, National Park Service and the United States Fish and Wildlife Service and is released in the spring with added data from the previous calendar year. Although the dataset represents the most complete digital record of fire perimeters in California, it is still incomplete, and users should be cautious when drawing conclusions based on the data. This data should be used carefully for statistical analysis and reporting due to missing perimeters (see Use Limitation in metadata). Some fires are missing because historical records were lost or damaged, were too small for the minimum cutoffs, had inadequate documentation or have not yet been incorporated into the database. Other errors with the fire perimeter database include duplicate fires and over-generalization. Additionally, over-generalization, particularly with large old fires, may show unburned "islands" within the final perimeter as burned. Users of the fire perimeter database must exercise caution in application of the data. Careful use of the fire perimeter database will prevent users from drawing inaccurate or erroneous conclusions from the data. This data is updated annually in the spring with fire perimeters from the previous fire season. This dataset may differ in California compared to that available from the National Interagency Fire Center (NIFC) due to different requirements between the two datasets. The data covers fires back to 1878. As of May 2024, it represents fire23_1. Please help improve this dataset by filling out this survey with feedback:Historic Fire Perimeter Dataset Feedback (arcgis.com)Current criteria for data collection are as follows:CAL FIRE (including contract counties) submit perimeters ≥10 acres in timber, ≥50 acres in brush, or ≥300 acres in grass, and/or ≥3 impacted residential or commercial structures, and/or caused ≥1 fatality.All cooperating agencies submit perimeters ≥10 acres.Version update:Firep23_1 was released in May 2024. Two hundred eighty four fires from the 2023 fire season were added to the database (21 from BLM, 102 from CAL FIRE, 72 from Contract Counties, 19 from LRA, 9 from NPS, 57 from USFS and 4 from USFW). The 2020 Cottonwood fire, 2021 Lone Rock and Union fires, as well as the 2022 Lost Lake fire were added. USFW submitted a higher accuracy perimeter to replace the 2022 River perimeter. Additionally, 48 perimeters were digitized from an historical map included in a publication from Weeks, d. et al. The Utilization of El Dorado County Land. May 1934, Bulletin 572. University of California, Berkeley. Two thousand eighteen perimeters had attributes updated, the bulk of which had IRWIN IDs added. A duplicate 2020 Erbes perimeter was removed. The following fires were identified as meeting our collection criteria, but are not included in this version and will hopefully be added in the next update: Big Hill #2 (2023-CAHIA-001020). YEAR_ field changed to a short integer type. San Diego CAL FIRE UNIT_ID changed to SDU (the former code MVU is maintained in the UNIT_ID domains). COMPLEX_INCNUM renamed to COMPLEX_ID and is in process of transitioning from local incident number to the complex IRWIN ID. Perimeters managed in a complex in 2023 are added with the complex IRWIN ID. Those previously added will transition to complex IRWIN IDs in a future update.Includes separate layers filtered by criteria as follows:California Fire Perimeters (All): Unfiltered. The entire collection of wildfire perimeters in the database. It is scale dependent and starts displaying at the country level scale. Recent Large Fire Perimeters (≥5000 acres): Filtered for wildfires greater or equal to 5,000 acres for the last 5 years of fires (2019-2023), symbolized with color by year and is scale dependent and starts displaying at the country level scale. Year-only labels for recent large fires.California Fire Perimeters (1950+): Filtered for wildfires that started in 1950-present. Symbolized by decade, and display starting at country level scale.Detailed metadata is included in the following documents:Wildland Fire Perimeters (Firep23_1) Metadata For any questions, please contact the data steward:Kim Wallin, GIS SpecialistCAL FIRE, Fire & Resource Assessment Program (FRAP)kimberly.wallin@fire.ca.gov

This is a copy of another layer - see original source: https://www.arcgis.com/home/item.html?id=e02b85c0ea784ce7bd8add7ae3d293d0OverviewThe national fire history perimeter data layer of conglomerated Agency Authoratative perimeters was developed in support of the WFDSS application and wildfire decision support for the 2021 fire season. The layer encompasses the final fire perimeter datasets of the USDA Forest Service, US Department of Interior Bureau of Land Management, Bureau of Indian Affairs, Fish and Wildlife Service, and National Park Service, the Alaska Interagency Fire Center, CalFire, and WFIGS History. Perimeters are included thru the 2021 fire season. Requirements for fire perimeter inclusion, such as minimum acreage requirements, are set by the contributing agencies. WFIGS, NPS and CALFIRE data now include Prescribed Burns. Data InputSeveral data sources were used in the development of this layer:Alaska fire history USDA FS Regional Fire History Data BLM Fire Planning and Fuels National Park Service - Includes Prescribed Burns Fish and Wildlife ServiceBureau of Indian AffairsCalFire FRAS - Includes Prescribed BurnsWFIGS - BLM & BIA and other S&LData LimitationsFire perimeter data are often collected at the local level, and fire management agencies have differing guidelines for submitting fire perimeter data. Often data are collected by agencies only once annually. If you do not see your fire perimeters in this layer, they were not present in the sources used to create the layer at the time the data were submitted. A companion service for perimeters entered into the WFDSS application is also available, if a perimeter is found in the WFDSS service that is missing in this Agency Authoratative service or a perimeter is missing in both services, please contact the appropriate agency Fire GIS Contact listed in the table below.AttributesThis dataset implements the NWCG Wildland Fire Perimeters (polygon) data standard.https://www.nwcg.gov/sites/default/files/stds/WildlandFirePerimeters_definition.pdfIRWINID - Primary key for linking to the IRWIN Incident dataset. The origin of this GUID is the wildland fire locations point data layer. (This unique identifier may NOT replace the GeometryID core attribute)INCIDENT - The name assigned to an incident; assigned by responsible land management unit. (IRWIN required). Officially recorded name.FIRE_YEAR (Alias) - Calendar year in which the fire started. Example: 2013. Value is of type integer (FIRE_YEAR_INT).AGENCY - Agency assigned for this fire - should be based on jurisdiction at origin.SOURCE - System/agency source of record from which the perimeter came.DATE_CUR - The last edit, update, or other valid date of this GIS Record. Example: mm/dd/yyyy.MAP_METHOD - Controlled vocabulary to define how the geospatial feature was derived. Map method may help define data quality.GPS-Driven; GPS-Flight; GPS-Walked; GPS-Walked/Driven; GPS-Unknown Travel Method; Hand Sketch; Digitized-Image; Digitized-Topo; Digitized-Other; Image Interpretation; Infrared Image; Modeled; Mixed Methods; Remote Sensing Derived; Survey/GCDB/Cadastral; Vector; OtherGIS_ACRES - GIS calculated acres within the fire perimeter. Not adjusted for unburned areas within the fire perimeter. Total should include 1 decimal place. (ArcGIS: Precision=10; Scale=1). Example: 23.9UNQE_FIRE_ - Unique fire identifier is the Year-Unit Identifier-Local Incident Identifier (yyyy-SSXXX-xxxxxx). SS = State Code or International Code, XXX or XXXX = A code assigned to an organizational unit, xxxxx = Alphanumeric with hyphens or periods. The unit identifier portion corresponds to the POINT OF ORIGIN RESPONSIBLE AGENCY UNIT IDENTIFIER (POOResonsibleUnit) from the responsible unit’s corresponding fire report. Example: 2013-CORMP-000001LOCAL_NUM - Local incident identifier (dispatch number). A number or code that uniquely identifies an incident for a particular local fire management organization within a particular calendar year. Field is string to allow for leading zeros when the local incident identifier is less than 6 characters. (IRWIN required). Example: 123456.UNIT_ID - NWCG Unit Identifier of landowner/jurisdictional agency unit at the point of origin of a fire. (NFIRS ID should be used only when no NWCG Unit Identifier exists). Example: CORMPCOMMENTS - Additional information describing the feature. Free Text.FEATURE_CA - Type of wildland fire polygon: Wildfire (represents final fire perimeter or last daily fire perimeter available) or Prescribed Fire or UnknownGEO_ID - Primary key for linking geospatial objects with other database systems. Required for every feature. This field may be renamed for each standard to fit the feature. Globally Unique Identifier (GUID).Cross-Walk from sources (GeoID) and other processing notesAK: GEOID = OBJECT ID of provided file geodatabase (4580 Records thru 2021), other federal sources for AK data removed. CA: GEOID = OBJECT ID of downloaded file geodatabase (12776 Records, federal fires removed, includes RX)FWS: GEOID = OBJECTID of service download combined history 2005-2021 (2052 Records). Handful of WFIGS (11) fires added that were not in FWS record.BIA: GEOID = "FireID" 2017/2018 data (416 records) provided or WFDSS PID (415 records). An additional 917 fires from WFIGS were added, GEOID=GLOBALID in source.NPS: GEOID = EVENT ID (IRWINID or FRM_ID from FOD), 29,943 records includes RX.BLM: GEOID = GUID from BLM FPER and GLOBALID from WFIGS. Date Current = best available modify_date, create_date, fire_cntrl_dt or fire_dscvr_dt to reduce the number of 9999 entries in FireYear. Source FPER (25,389 features), WFIGS (5357 features)USFS: GEOID=GLOBALID in source, 46,574 features. Also fixed Date Current to best available date from perimeterdatetime, revdate, discoverydatetime, dbsourcedate to reduce number of 1899 entries in FireYear.Relevant Websites and ReferencesAlaska Fire Service: https://afs.ak.blm.gov/CALFIRE: https://frap.fire.ca.gov/mapping/gis-dataBIA - data prior to 2017 from WFDSS, 2017-2018 Agency Provided, 2019 and after WFIGSBLM: https://gis.blm.gov/arcgis/rest/services/fire/BLM_Natl_FirePerimeter/MapServerNPS: New data set provided from NPS Fire & Aviation GIS. cross checked against WFIGS for any missing perimetersFWS -https://services.arcgis.com/QVENGdaPbd4LUkLV/arcgis/rest/services/USFWS_Wildfire_History_gdb/FeatureServerUSFS - https://apps.fs.usda.gov/arcx/rest/services/EDW/EDW_FireOccurrenceAndPerimeter_01/MapServerAgency Fire GIS ContactsRD&A Data ManagerVACANTSusan McClendonWFM RD&A GIS Specialist208-258-4244send emailJill KuenziUSFS-NIFC208.387.5283send email Joseph KafkaBIA-NIFC208.387.5572send emailCameron TongierUSFWS-NIFC208.387.5712send emailSkip EdelNPS-NIFC303.969.2947send emailJulie OsterkampBLM-NIFC208.258.0083send email Jennifer L. Jenkins Alaska Fire Service 907.356.5587 send emailLayers

This map shows the burn areas of wildfires between 1887 to present in California. The perimeters are colored by decade to highlight the size and quantity of more recent years. The Living Atlas layer used in this map contains the fire perimeters from the previous calendar year, and those dating back to 1878, for California. Perimeters are sourced from the Fire and Resource Assessment Program (FRAP) and are updated shortly after the end of each calendar year. Information below is from the FRAP web site.About the Perimeters in this LayerThe California Department of Forestry and Fire Protection's Fire and Resource Assessment Program (FRAP) annually maintains and distributes an historical wildland fire perimeter dataset from across public and private lands in California. The GIS data is developed with the cooperation of the United States Forest Service Region 5, the Bureau of Land Management, California State Parks, National Park Service and the United States Fish and Wildlife Service and is released in the spring with added data from the previous calendar year. Although the dataset represents the most complete digital record of fire perimeters in California, it is still incomplete, and users should be cautious when drawing conclusions based on the data. For detailed and current metadata and update cycle about this data and the source, visit this resource.Source: Fire and Resource Assessment Program (FRAP)For any questions, please contact the data steward:Kim Wallin, GIS SpecialistCAL FIRE, Fire & Resource Assessment Program (FRAP)kimberly.wallin@fire.ca.gov

The California Department of Forestry and Fire Protection's Fire and Resource Assessment Program (FRAP) annually maintains and distributes an historical wildland fire perimeter dataset from across public and private lands in California. The GIS data is developed with the cooperation of the United States Forest Service Region 5, the Bureau of Land Management, California State Parks, National Park Service and the United States Fish and Wildlife Service and is released in the spring with added data from the previous calendar year. Although the dataset represents the most complete digital record of fire perimeters in California, it is still incomplete, and users should be cautious when drawing conclusions based on the data.

This data should be used carefully for statistical analysis and reporting due to missing perimeters (see Use Limitation in metadata). Some fires are missing because historical records were lost or damaged, were too small for the minimum cutoffs, had inadequate documentation or have not yet been incorporated into the database. Other errors with the fire perimeter database include duplicate fires and over-generalization. Additionally, over-generalization, particularly with large old fires, may show unburned "islands" within the final perimeter as burned. Users of the fire perimeter database must exercise caution in application of the data. Careful use of the fire perimeter database will prevent users from drawing inaccurate or erroneous conclusions from the data. This data is updated annually in the spring with fire perimeters from the previous fire season. This dataset may differ in California compared to that available from the National Interagency Fire Center (NIFC) due to different requirements between the two datasets. The data covers fires back to 1878. As of May 2024, it represents fire23_1.

Please help improve this dataset by filling out this survey with feedback:

Historic Fire Perimeter Dataset Feedback (arcgis.com)

Current criteria for data collection are as follows:

CAL FIRE (including contract counties) submit perimeters ≥10 acres in timber, ≥50 acres in brush, or ≥300 acres in grass, and/or ≥3 impacted residential or commercial structures, and/or caused ≥1 fatality.

All cooperating agencies submit perimeters ≥10 acres.

Version update:

Firep23_1 was released in May 2024. Two hundred eighty four fires from the 2023 fire season were added to the database (21 from BLM, 102 from CAL FIRE, 72 from Contract Counties, 19 from LRA, 9 from NPS, 57 from USFS and 4 from USFW). The 2020 Cottonwood fire, 2021 Lone Rock and Union fires, as well as the 2022 Lost Lake fire were added. USFW submitted a higher accuracy perimeter to replace the 2022 River perimeter. Additionally, 48 perimeters were digitized from an historical map included in a publication from Weeks, d. et al. The Utilization of El Dorado County Land. May 1934, Bulletin 572. University of California, Berkeley. Two thousand eighteen perimeters had attributes updated, the bulk of which had IRWIN IDs added. A duplicate 2020 Erbes perimeter was removed. The following fires were identified as meeting our collection criteria, but are not included in this version and will hopefully be added in the next update: Big Hill #2 (2023-CAHIA-001020).

YEAR_ field changed to a short integer type. San Diego CAL FIRE UNIT_ID changed to SDU (the former code MVU is maintained in the UNIT_ID domains). COMPLEX_INCNUM renamed to COMPLEX_ID and is in process of transitioning from local incident number to the complex IRWIN ID. Perimeters managed in a complex in 2023 are added with the complex IRWIN ID. Those previously added will transition to complex IRWIN IDs in a future update.

Includes separate layers filtered by criteria as follows:

California Fire Perimeters (All): Unfiltered. The entire collection of wildfire perimeters in the database. It is scale dependent and starts displaying at the country level scale.

Recent Large Fire Perimeters (≥5000 acres): Filtered for wildfires greater or equal to 5,000 acres for the last 5 years of fires (2019-2023), symbolized with color by year and is scale dependent and starts displaying at the country level scale. Year-only labels for recent large fires.

California Fire Perimeters (1950+): Filtered for wildfires that started in 1950-present. Symbolized by decade, and display starting at country level scale.

Detailed metadata is included in the following documents:

Wildland Fire Perimeters (Firep23_1) Metadata

For any questions, please contact the data steward:

Kim Wallin, GIS Specialist

CAL FIRE, Fire & Resource Assessment Program (FRAP)

kimberly.wallin@fire.ca.gov

description: CDF, USDA Forest Service Region 5, BLM, NPS, Contract Counties and other agencies jointly maintain a comprehensive fire perimeter GIS layer for public and private lands throughout the state. The data covers fires back to 1950 and fires 10 acres and greater. Depictions of the historical fire perimeters Ventura, Los Angeles, San Bernardino, Orange, Riverside, and San Diego counties were pulled together from downloadable information on the CAL FIRE (California Department of Forestry and Fire Protection) web site (http://frap.cdf.ca.gov/data/frapgisdata/select.asp). This information shows the fire history for these six counties prior to the recent (late October 2007) fires. Please read the attached metadata carefully to further undersand the information presented here. The Data Viewer used in BIOS has a query function (see tool bar across the top of the map screen) to query all fields including date fields to narrow the number of fire perimeters shown to the period of time you are interested in.; abstract: CDF, USDA Forest Service Region 5, BLM, NPS, Contract Counties and other agencies jointly maintain a comprehensive fire perimeter GIS layer for public and private lands throughout the state. The data covers fires back to 1950 and fires 10 acres and greater. Depictions of the historical fire perimeters Ventura, Los Angeles, San Bernardino, Orange, Riverside, and San Diego counties were pulled together from downloadable information on the CAL FIRE (California Department of Forestry and Fire Protection) web site (http://frap.cdf.ca.gov/data/frapgisdata/select.asp). This information shows the fire history for these six counties prior to the recent (late October 2007) fires. Please read the attached metadata carefully to further undersand the information presented here. The Data Viewer used in BIOS has a query function (see tool bar across the top of the map screen) to query all fields including date fields to narrow the number of fire perimeters shown to the period of time you are interested in.

This layer contains the fire perimeters from the previous calendar year, and those dating back to 1878, for California. Perimeters are sourced from the Fire and Resource Assessment Program (FRAP) and are updated shortly after the end of each calendar year. Information below is from the FRAP web site. There is also a tile cache version of this layer.About the Perimeters in this LayerInitially CAL FIRE and the USDA Forest Service jointly developed a fire perimeter GIS layer for public and private lands throughout California. The data covered the period 1950 to 2001 and included USFS wildland fires 10 acres and greater, and CAL FIRE fires 300 acres and greater. BLM and NPS joined the effort in 2002, collecting fires 10 acres and greater. Also in 2002, CAL FIRE’s criteria expanded to include timber fires 10 acres and greater in size, brush fires 50 acres and greater in size, grass fires 300 acres and greater in size, wildland fires destroying three or more structures, and wildland fires causing $300,000 or more in damage. As of 2014, the monetary requirement was dropped and the damage requirement is 3 or more habitable structures or commercial structures.In 1989, CAL FIRE units were requested to fill in gaps in their fire perimeter data as part of the California Fire Plan. FRAP provided each unit with a preliminary map of 1950-89 fire perimeters. Unit personnel also verified the pre-1989 perimeter maps to determine if any fires were missing or should be re-mapped. Each CAL FIRE Unit then generated a list of 300+ acre fires that started since 1989 using the CAL FIRE Emergency Activity Reporting System (EARS). The CAL FIRE personnel used this list to gather post-1989 perimeter maps for digitizing. The final product is a statewide GIS layer spanning the period 1950-1999.CAL FIRE has completed inventory for the majority of its historical perimeters back to 1950. BLM fire perimeters are complete from 2002 to the present. The USFS has submitted records as far back as 1878. The NPS records date to 1921.About the ProgramFRAP compiles fire perimeters and has established an on-going fire perimeter data capture process. CAL FIRE, the United States Forest Service Region 5, the Bureau of Land Management, and the National Park Service jointly develop the fire perimeter GIS layer for public and private lands throughout California at the end of the calendar year. Upon release, the data is current as of the last calendar year.The fire perimeter database represents the most complete digital record of fire perimeters in California. However it is still incomplete in many respects. Fire perimeter database users must exercise caution to avoid inaccurate or erroneous conclusions. For more information on potential errors and their source please review the methodology section of these pages.The fire perimeters database is an Esri ArcGIS file geodatabase with three data layers (feature classes):A layer depicting wildfire perimeters from contributing agencies current as of the previous fire year;A layer depicting prescribed fires supplied from contributing agencies current as of the previous fire year;A layer representing non-prescribed fire fuel reduction projects that were initially included in the database. Fuels reduction projects that are non prescribed fire are no longer included.All three are available in this layer. Additionally, you can find related web maps, view layers set up for individual years or decades, and tile layers here.Recommended Uses There are many uses for fire perimeter data. For example, it is used on incidents to locate recently burned areas that may affect fire behavior (see map left).Other uses include:Improving fire prevention, suppression, and initial attack success.Reduce and track hazards and risks in urban interface areas.Provide information for fire ecology studies for example studying fire effects on vegetation over time. Download the Fire Perimeter GIS data hereDownload a statewide map of Fire Perimeters hereSource: Fire and Resource Assessment Program (FRAP)

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

This filtered version of the layer represents all IRWIN-tracked fires that originated in California or are are less than 100% contained.This layer presents the best-known point and perimeter locations of wildfire occurrences within the United States over the past 7 days. Points mark a location within the wildfire area and provide current information about that wildfire. Perimeters are the line surrounding land that has been impacted by a wildfire.Consumption Best Practices:As a service that is subject to very high usage, ensure peak performance and accessibility of your maps and apps by avoiding the use of non-cacheable relative Date/Time field filters. To accommodate filtering events by Date/Time, we suggest using the included "Age" fields that maintain the number of days or hours since a record was created or last modified, compared to the last service update. These queries fully support the ability to cache a response, allowing common query results to be efficiently provided to users in a high demand service environment.When ingesting this service in your applications, avoid using POST requests whenever possible. These requests can compromise performance and scalability during periods of high usage because they too are not cacheable.Source:  Wildfire points are sourced from Integrated Reporting of Wildland-Fire Information (IRWIN) and perimeters from National Interagency Fire Center (NIFC). Current Incidents: This layer provides a near real-time view of the data being shared through the Integrated Reporting of Wildland-Fire Information (IRWIN) service. IRWIN provides data exchange capabilities between participating wildfire systems, including federal, state and local agencies. Data is synchronized across participating organizations to make sure the most current information is available. The display of the points are based on the NWCG Fire Size Classification applied to the daily acres attribute.Current Perimeters: This layer displays fire perimeters posted to the National Incident Feature Service. It is updated from operational data and may not reflect current conditions on the ground. For a better understanding of the workflows involved in mapping and sharing fire perimeter data, see the National Wildfire Coordinating Group Standards for Geospatial Operations.Update Frequency:  Every 15 minutes using the Aggregated Live Feed Methodology based on the following filters:Events modified in the last 7 daysEvents that are not given a Fire Out DateIncident Type Kind: FiresIncident Type Category: Prescribed Fire, Wildfire, and Incident ComplexArea Covered: United StatesWhat can I do with this layer? The data includes basic wildfire information, such as location, size, environmental conditions, and resource summaries. Features can be filtered by incident name, size, or date keeping in mind that not all perimeters are fully attributed.Attribute InformationThis is a list of attributes that benefit from additional explanation. Not all attributes are listed.Incident Type Category: This is a breakdown of events into more specific categories.Wildfire (WF) -A wildland fire originating from an unplanned ignition, such as lightning, volcanos, unauthorized and accidental human caused fires, and prescribed fires that are declared wildfires.Prescribed Fire (RX) - A wildland fire originating from a planned ignition in accordance with applicable laws, policies, and regulations to meet specific objectives.Incident Complex (CX) - An incident complex is two or more individual incidents in the same general proximity that are managed together under one Incident Management Team. This allows resources to be used across the complex rather than on individual incidents uniting operational activities.IrwinID: Unique identifier assigned to each incident record in both point and perimeter layers.Acres: these typically refer to the number of acres within the current perimeter of a specific, individual incident, including unburned and unburnable islands.Discovery: An estimate of acres burning upon the discovery of the fire.Calculated or GIS:  A measure of acres calculated (i.e., infrared) from a geospatial perimeter of a fire.Daily: A measure of acres reported for a fire.Final: The measure of acres within the final perimeter of a fire. More specifically, the number of acres within the final fire perimeter of a specific, individual incident, including unburned and unburnable islands.Dates: the various systems contribute date information differently so not all fields will be populated for every fire.FireDiscovery: The date and time a fire was reported as discovered or confirmed to exist. May also be the start date for reporting purposes. Containment: The date and time a wildfire was declared contained. Control: The date and time a wildfire was declared under control.ICS209Report: The date and time of the latest approved ICS-209 report.Current: The date and time a perimeter is last known to be updated.FireOut: The date and time when a fire is declared out.ModifiedOnAge: (Integer) Computed days since event last modified.DiscoveryAge: (Integer) Computed days since event's fire discovery date.CurrentDateAge: (Integer) Computed days since perimeter last modified.CreateDateAge: (Integer) Computed days since perimeter entry created.GACC: A code that identifies one of the wildland fire geographic area coordination centers. A geographic area coordination center is a facility that is used for the coordination of agency or jurisdictional resources in support of one or more incidents within a geographic coordination area.Fire Mgmt Complexity: The highest management level utilized to manage a wildland fire event.Incident Management Organization: The incident management organization for the incident, which may be a Type 1, 2, or 3 Incident Management Team (IMT), a Unified Command, a Unified Command with an IMT, National Incident Management Organization (NIMO), etc. This field is null if no team is assigned.Unique Fire Identifier: Unique identifier assigned to each wildland fire. yyyy = calendar year, SSUUUU = Point Of Origin (POO) protecting unit identifier (5 or 6 characters), xxxxxx = local incident identifier (6 to 10 characters)RevisionsJan 4, 2021: Added Integer fields 'Days Since...' to Current_Incidents point layer and Current_Perimeters polygon layer. These fields are computed when the data is updated, reflecting the current number of days since each record was last updated. This will aid in making 'age' related, cache friendly queries.Mar 12, 2021: Added second set of 'Age' fields for Event and Perimeter record creation, reflecting age in Days since service data update.Apr 21, 2021: Current_Perimeters polygon layer is now being populated by NIFC's newest data source. A new field was added, 'IncidentTypeCategory' to better distinguish Incident types for Perimeters and now includes type 'CX' or Complex Fires. Five fields were not transferrable, and as a result 'Comments', 'Label', 'ComplexName', 'ComplexID', and 'IMTName' fields will be Null moving forward.Apr 26, 2021: Updated Incident Layer Symbology to better clarify events, reduce download size and overhead of symbols. Updated Perimeter Layer Symbology to better distingish between Wildfires and Prescribed Fires.May 5, 2021: Slight modification to Arcade logic for Symbology, refining Age comparison to Zero for fires in past 24-hours.Aug 16, 2021: Enabled Time Series capability on Layers (off by default) using 'Fire Discovery Date' for Incidents and 'Creation Date' for Perimeters.This layer is provided for informational purposes and is not monitored 24/7 for accuracy and currency.If you would like to be alerted to potential issues or simply see when this Service will update next, please visit our Live Feed Status Page!

The California Department of Forestry and Fire Protection's Fire and Resource Assessment Program (FRAP) annually maintains and distributes an historical wildland fire perimeter dataset from across public and private lands in California. The GIS data is developed with the cooperation of the United States Forest Service Region 5, the Bureau of Land Management, California State Parks, National Park Service and the United States Fish and Wildlife Service and is released in the spring with added data from the previous calendar year. Although the dataset represents the most complete digital record of fire perimeters in California, it is still incomplete, and users should be cautious when drawing conclusions based on the data.

This data should be used carefully for statistical analysis and reporting due to missing perimeters (see Use Limitation in metadata). Some fires are missing because historical records were lost or damaged, were too small for the minimum cutoffs, had inadequate documentation or have not yet been incorporated into the database. Other errors with the fire perimeter database include duplicate fires and over-generalization. Additionally, over-generalization, particularly with large old fires, may show unburned "islands" within the final perimeter as burned. Users of the fire perimeter database must exercise caution in application of the data. Careful use of the fire perimeter database will prevent users from drawing inaccurate or erroneous conclusions from the data. This data is updated annually in the spring with fire perimeters from the previous fire season. This dataset may differ in California compared to that available from the National Interagency Fire Center (NIFC) due to different requirements between the two datasets. The data covers fires back to 1878. As of May 2024, it represents fire23_1.

Please help improve this dataset by filling out this survey with feedback:

Historic Fire Perimeter Dataset Feedback (arcgis.com)

Current criteria for data collection are as follows:

CAL FIRE (including contract counties) submit perimeters ≥10 acres in timber, ≥50 acres in brush, or ≥300 acres in grass, and/or ≥3 impacted residential or commercial structures, and/or caused ≥1 fatality.

All cooperating agencies submit perimeters ≥10 acres.

Version update:

Firep23_1 was released in May 2024. Two hundred eighty four fires from the 2023 fire season were added to the database (21 from BLM, 102 from CAL FIRE, 72 from Contract Counties, 19 from LRA, 9 from NPS, 57 from USFS and 4 from USFW). The 2020 Cottonwood fire, 2021 Lone Rock and Union fires, as well as the 2022 Lost Lake fire were added. USFW submitted a higher accuracy perimeter to replace the 2022 River perimeter. Additionally, 48 perimeters were digitized from an historical map included in a publication from Weeks, d. et al. The Utilization of El Dorado County Land. May 1934, Bulletin 572. University of California, Berkeley. Two thousand eighteen perimeters had attributes updated, the bulk of which had IRWIN IDs added. A duplicate 2020 Erbes perimeter was removed. The following fires were identified as meeting our collection criteria, but are not included in this version and will hopefully be added in the next update: Big Hill #2 (2023-CAHIA-001020).

YEAR_ field changed to a short integer type. San Diego CAL FIRE UNIT_ID changed to SDU (the former code MVU is maintained in the UNIT_ID domains). COMPLEX_INCNUM renamed to COMPLEX_ID and is in process of transitioning from local incident number to the complex IRWIN ID. Perimeters managed in a complex in 2023 are added with the complex IRWIN ID. Those previously added will transition to complex IRWIN IDs in a future update.

Includes separate layers filtered by criteria as follows:

California Fire Perimeters (All): Unfiltered. The entire collection of wildfire perimeters in the database. It is scale dependent and starts displaying at the country level scale.

Recent Large Fire Perimeters (≥5000 acres): Filtered for wildfires greater or equal to 5,000 acres for the last 5 years of fires (2019-2023), symbolized with color by year and is scale dependent and starts displaying at the country level scale. Year-only labels for recent large fires.

California Fire Perimeters (1950+): Filtered for wildfires that started in 1950-present. Symbolized by decade, and display starting at country level scale.

Detailed metadata is included in the following documents:

Wildland Fire Perimeters (Firep23_1) Metadata

For any questions, please contact the data steward:

Kim Wallin, GIS Specialist

CAL FIRE, Fire & Resource Assessment Program (FRAP)

kimberly.wallin@fire.ca.gov

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Combined recent and historical Notices of Emergency (EMs) Timber Operations accepted by the California Department of Forestry & Fire Protection under the requirements of PRC §4592 and 14 CCR §§ 1052-1052.5 permitting the removal of timber on an emergency basis. Data from 2014 to present, but primarily from 2015 onwards.The California Forest Practice Rules define emergencies as "conditions that will cause waste or loss of timber resources to the timber owner that may be minimized by immediate harvesting of infected, infested, or damaged timber or salvaging down timber", or other conditions causing economic loss. Emergency notices are valid for one year after being accepted by the department. This data set is in the California Teale Albers NAD83 meters projection (TA83).Link to the California Forest Practice Rules:https://bof.fire.ca.gov/regulations/bills-statutes-rules-and-annual-california-forest-practice-rulesFor additional information on specific plans see the California Timber Regulation and Environmental Evaluation System (CalTREES): https://caltreesplans.resources.ca.gov/caltrees/Default.aspx

The Wildland Fire Interagency Geospatial Services (WFIGS) Group provides authoritative geospatial data products under the interagency Wildland Fire Data Program. Hosted in the National Interagency Fire Center ArcGIS Online Organization (The NIFC Org), WFIGS provides both internal and public facing data, accessible in a variety of formats.

      <table border='0' cellpadding='0' cellspacing='0' style='border-collapse:collapse; width:500pt;' width='449'><tbody><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>Incident Name (Polygon)</td>
      <td style='border-left:none; width:184pt;' width='245'>The Incident Name from the source polygon.</td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>Feature Category</td>
      <td style='border-left:none; width:184pt;' width='245'>Type of wildland fire perimeter set for the source polygon.</td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>Map Method</td>
      <td style='border-left:none; width:184pt;' width='245'>Controlled vocabulary to define how the source polygon was derived. Map Method may help define data quality.</td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>GIS Acres</td>
      <td style='border-left:none; width:184pt;' width='245'>User-calculated acreage on the source polygon.</td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>Polygon Create Date</td>
      <td style='border-left:none; width:184pt;' width='245'>System field. Time stamp for the source polygon feature creation.</td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>Polygon Modified Date</td>
      <td style='border-left:none; width:184pt;' width='245'>System field. Time stamp for the most recent edit to the source polygon feature.<br />
      </td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>Polygon Collection Date Time</td>
      <td style='border-left:none; width:184pt;' width='245'>Date time for the source polygon feature collection.</td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>Acres Auto Calculated</td>
      <td style='border-left:none; width:184pt;' width='245'>Automated calculation of the source polygon acreage.</td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>Polygon Source</td>
      <td style='border-left:none; width:184pt;' width='245'>Data source of the perimeter geometry.<br />{Year} NIFS: Annual National Incident Feature Service<br />FFP: Final Fire Perimeter Service (Certified Perimeters)</td>
    </tr><tr height='17' style='height:12.75pt;'>
      <td height='17' style='height:12.75pt; width:153pt;' width='204'>ABCD Misc</td>
      <td style='border-left:none; width:184pt;' width='245'>A FireCode 

used by USDA FS to track and compile cost information for emergency initial attack fire suppression expenditures. for A, B, C & D size class fires on FS lands. ADS Permission State Indicates the permission hierarchy that is currently being applied when a system utilizes the UpdateIncident operation. IRWIN Archived On A date set by IRWIN that indicates when an incident's data has met the rules defined for the record to become part of the historical fire records rather than an operational incident record. The value will be set the current date/time if any of the following criteria are met:
1. ContainmentDataTime or ControlDateTime or FireOutDateTime or ModifiedOnDateTime > 12 months from the current DateTime
2. FinalFireReportDate is not null and ADSPermissionState is 'certified'. Calculated Acres A measure of acres calculated (i.e., infrared) from a geospatial perimeter of a fire. More specifically, the number of acres within the current perimeter of a specific, individual incident, including unburned and unburnable islands. The minimum size must be 0.1. Containment Date Time The date and time a wildfire was declared contained. Control Date Time The date and time a wildfire was declared under control. Created By System ArcGIS Server Username of system that created the IRWIN Incident record. IRWIN Created On Date Time Date/time that the IRWIN Incident record was created. IRWIN Daily Acres A measure of acres reported for a fire. More specifically, the number of acres within the current perimeter of a specific, individual incident, including unburned and unburnable islands. The minimum size must be

CAL FIRE's Fire and Resource Assessment Program (FRAP) annually maintains and distributes an historical fire perimeter dataset from across public and private lands in California. The GIS data is developed with the cooperation of the United States Forest Service Region 5, the Bureau of Land Management, the National Park Service and the United States Fish and Wildlife Service and is released in the spring with added data from the previous calendar year. Although the dataset represents the most complete digital record of fire perimeters in California, it is still incomplete, and users should be cautious when drawing conclusions based on the data.

This app contains three pages of maps and documentation of the historical fire perimeter metadata:

Historical Fire Perimeters: The landing page highlights the recent large fires (≥5,000 acres) on a backdrop of all of the dataset's documented fire perimeters dating back to 1878. This map includes perimeters symbolized by decade, county boundaries, California Vegetation, and NAIP imagery back to 2005. This page provides users the ability to add their own data or filter the fire perimeter data. It cleanly lists fire perimeters shown on the map with their name, year, and GIS calculated acreage. The user can navigate to the CAL FIRE current incident webpage or provide comments to the dataset's steward.

Times Burned: The second page provides a map showing an analysis performed annually on the fire perimeter dataset to show case burn frequency from 1950 to present for fires greater than one acre.

Fire Across Time: This third page provides a time enabled layer of the fire perimeter dataset, featuring a time slider to allow users to view the perimeter dataset across time.

The final page provides the user with the dataset's metadata, including its most current data dictionary.

For any questions, please contact the data steward:

Kim Wallin, GIS Specialist

CAL FIRE, Fire & Resource Assessment Program (FRAP)

kimberly.wallin@fire.ca.gov

In 2012, the CPUC ordered the development of a statewide map that is designed specifically for the purpose of identifying areas where there is an increased risk for utility associated wildfires. The development of the CPUC -sponsored fire-threat map, herein "CPUC Fire-Threat Map," started in R.08-11-005 and continued in R.15-05-006.

A multistep process was used to develop the statewide CPUC Fire-Threat Map. The first step was to develop Fire Map 1 (FM 1), an agnostic map which depicts areas of California where there is an elevated hazard for the ignition and rapid spread of powerline fires due to strong winds, abundant dry vegetation, and other environmental conditions. These are the environmental conditions associated with the catastrophic powerline fires that burned 334 square miles of Southern California in October 2007. FM 1 was developed by CAL FIRE and adopted by the CPUC in Decision 16-05-036.

FM 1 served as the foundation for the development of the final CPUC Fire-Threat Map. The CPUC Fire-Threat Map delineates, in part, the boundaries of a new High Fire-Threat District (HFTD) where utility infrastructure and operations will be subject to stricter fire‑safety regulations. Importantly, the CPUC Fire-Threat Map (1) incorporates the fire hazards associated with historical powerline wildfires besides the October 2007 fires in Southern California (e.g., the Butte Fire that burned 71,000 acres in Amador and Calaveras Counties in September 2015), and (2) ranks fire-threat areas based on the risks that utility-associated wildfires pose to people and property.

Primary responsibility for the development of the CPUC Fire-Threat Map was delegated to a group of utility mapping experts known as the Peer Development Panel (PDP), with oversight from a team of independent experts known as the Independent Review Team (IRT). The members of the IRT were selected by CAL FIRE and CAL FIRE served as the Chair of the IRT. The development of CPUC Fire-Threat Map includes input from many stakeholders, including investor-owned and publicly owned electric utilities, communications infrastructure providers, public interest groups, and local public safety agencies.

The PDP served a draft statewide CPUC Fire-Threat Map on July 31, 2017, which was subsequently reviewed by the IRT. On October 2 and October 5, 2017, the PDP filed an Initial CPUC Fire-Threat Map that reflected the results of the IRT's review through September 25, 2017. The final IRT-approved CPUC Fire-Threat Map was filed on November 17, 2017. On November 21, 2017, SED filed on behalf of the IRT a summary report detailing the production of the CPUC Fire-Threat Map(referenced at the time as Fire Map 2). Interested parties were provided opportunity to submit alternate maps, written comments on the IRT-approved map and alternate maps (if any), and motions for Evidentiary Hearings. No motions for Evidentiary Hearings or alternate map proposals were received. As such, on January 19, 2018 the CPUC adopted, via Safety and Enforcement Division's (SED) disposition of a Tier 1 Advice Letter, the final CPUC Fire-Threat Map.

Additional information can be found here.

In 2012, the CPUC ordered the development of a statewide map that is designed specifically for the purpose of identifying areas where there is an increased risk for utility associated wildfires. The development of the CPUC -sponsored fire-threat map, herein "CPUC Fire-Threat Map," started in R.08-11-005 and continued in R.15-05-006. A multistep process was used to develop the statewide CPUC Fire-Threat Map. The first step was to develop Fire Map 1 (FM 1), an agnostic map which depicts areas of California where there is an elevated hazard for the ignition and rapid spread of powerline fires due to strong winds, abundant dry vegetation, and other environmental conditions. These are the environmental conditions associated with the catastrophic powerline fires that burned 334 square miles of Southern California in October 2007. FM 1 was developed by CAL FIRE and adopted by the CPUC in Decision 16-05-036.FM 1 served as the foundation for the development of the final CPUC Fire-Threat Map. The CPUC Fire-Threat Map delineates, in part, the boundaries of a new High Fire-Threat District (HFTD) where utility infrastructure and operations will be subject to stricter fire‑safety regulations. Importantly, the CPUC Fire-Threat Map (1) incorporates the fire hazards associated with historical powerline wildfires besides the October 2007 fires in Southern California (e.g., the Butte Fire that burned 71,000 acres in Amador and Calaveras Counties in September 2015), and (2) ranks fire-threat areas based on the risks that utility-associated wildfires pose to people and property. Primary responsibility for the development of the CPUC Fire-Threat Map was delegated to a group of utility mapping experts known as the Peer Development Panel (PDP), with oversight from a team of independent experts known as the Independent Review Team (IRT). The members of the IRT were selected by CAL FIRE and CAL FIRE served as the Chair of the IRT. The development of CPUC Fire-Threat Map includes input from many stakeholders, including investor-owned and publicly owned electric utilities, communications infrastructure providers, public interest groups, and local public safety agencies. The PDP served a draft statewide CPUC Fire-Threat Map on July 31, 2017, which was subsequently reviewed by the IRT. On October 2 and October 5, 2017, the PDP filed an Initial CPUC Fire-Threat Map that reflected the results of the IRT's review through September 25, 2017. The final IRT-approved CPUC Fire-Threat Map was filed on November 17, 2017. On November 21, 2017, SED filed on behalf of the IRT a summary report detailing the production of the CPUC Fire-Threat Map(referenced at the time as Fire Map 2). Interested parties were provided opportunity to submit alternate maps, written comments on the IRT-approved map and alternate maps (if any), and motions for Evidentiary Hearings. No motions for Evidentiary Hearings or alternate map proposals were received. As such, on January 19, 2018 the CPUC adopted, via Safety and Enforcement Division's (SED) disposition of a Tier 1 Advice Letter, the final CPUC Fire-Threat Map.Additional information can be found here.

In 2012, the CPUC ordered the development of a statewide map that is designed specifically for the purpose of identifying areas where there is an increased risk for utility associated wildfires. The development of the CPUC -sponsored fire-threat map, herein "CPUC Fire-Threat Map," started in R.08-11-005 and continued in R.15-05-006.

A multistep process was used to develop the statewide CPUC Fire-Threat Map. The first step was to develop Fire Map 1 (FM 1), an agnostic map which depicts areas of California where there is an elevated hazard for the ignition and rapid spread of powerline fires due to strong winds, abundant dry vegetation, and other environmental conditions. These are the environmental conditions associated with the catastrophic powerline fires that burned 334 square miles of Southern California in October 2007. FM 1 was developed by CAL FIRE and adopted by the CPUC in Decision 16-05-036.

FM 1 served as the foundation for the development of the final CPUC Fire-Threat Map. The CPUC Fire-Threat Map delineates, in part, the boundaries of a new High Fire-Threat District (HFTD) where utility infrastructure and operations will be subject to stricter fire‑safety regulations. Importantly, the CPUC Fire-Threat Map (1) incorporates the fire hazards associated with historical powerline wildfires besides the October 2007 fires in Southern California (e.g., the Butte Fire that burned 71,000 acres in Amador and Calaveras Counties in September 2015), and (2) ranks fire-threat areas based on the risks that utility-associated wildfires pose to people and property.

Primary responsibility for the development of the CPUC Fire-Threat Map was delegated to a group of utility mapping experts known as the Peer Development Panel (PDP), with oversight from a team of independent experts known as the Independent Review Team (IRT). The members of the IRT were selected by CAL FIRE and CAL FIRE served as the Chair of the IRT. The development of CPUC Fire-Threat Map includes input from many stakeholders, including investor-owned and publicly owned electric utilities, communications infrastructure providers, public interest groups, and local public safety agencies.

The PDP served a draft statewide CPUC Fire-Threat Map on July 31, 2017, which was subsequently reviewed by the IRT. On October 2 and October 5, 2017, the PDP filed an Initial CPUC Fire-Threat Map that reflected the results of the IRT's review through September 25, 2017. The final IRT-approved CPUC Fire-Threat Map was filed on November 17, 2017. On November 21, 2017, SED filed on behalf of the IRT a summary report detailing the production of the CPUC Fire-Threat Map(referenced at the time as Fire Map 2). Interested parties were provided opportunity to submit alternate maps, written comments on the IRT-approved map and alternate maps (if any), and motions for Evidentiary Hearings. No motions for Evidentiary Hearings or alternate map proposals were received. As such, on January 19, 2018 the CPUC adopted, via Safety and Enforcement Division's (SED) disposition of a Tier 1 Advice Letter, the final CPUC Fire-Threat Map.

Additional information can be found here.