In 2023, the resident population of California was ***** million. This is a slight decrease from the previous year, with ***** million people in 2022. This makes it the most populous state in the U.S. Californian demographics Along with an increase in population, California’s gross domestic product (GDP) has also been increasing, from *** trillion U.S. dollars in 2000 to **** trillion U.S. dollars in 2023. In the same time period, the per-capita personal income has almost doubled, from ****** U.S. dollars in 2000 to ****** U.S. dollars in 2022. In 2023, the majority of California’s resident population was Hispanic or Latino, although the number of white residents followed as a close second, with Asian residents making up the third-largest demographic in the state. The dark side of the Golden State While California is one of the most well-known states in the U.S., is home to Silicon Valley, and one of the states where personal income has been increasing over the past 20 years, not everyone in California is so lucky: In 2023, the poverty rate in California was about ** percent, and the state had the fifth-highest rate of homelessness in the country during that same year, with an estimated ** homeless people per 10,000 of the population.

The Census Bureau released revised delineations for urban areas on December 29, 2022. The new criteria (contained in this Federal Register Notice) is based primarily on housing unit density measured at the census block level. The minimum qualifying threshold for inclusion as an urban area is an area that contains at least 2,000 housing units or has a population of at least 5,000 persons. It also eliminates the classification of areas as “urban clusters/urbanized areas”. This represents a change from 2010, where urban areas were defined as areas consisting of 50,000 people or more and urban clusters consisted of at least 2,500 people but less than 50,000 people with at least 1,500 people living outside of group quarters. Due to the new population thresholds for urban areas, 36 urban clusters in California are no longer considered urban areas, leaving California with 193 urban areas after the new criteria was implemented.

The State of California experienced an increase of 1,885,884 in the total urban population, or 5.3%. However, the total urban area population as a percentage of the California total population went down from 95% to 94.2%. For more information about the mapped data, download the Excel spreadsheet here.

Please note that some of the 2020 urban areas have different names or additional place names as a result of the inclusion of housing unit counts as secondary naming criteria.

Please note there are four urban areas that cross state boundaries in Arizona and Nevada. For 2010, only the parts within California are displayed on the map; however, the population and housing estimates represent the entirety of the urban areas. For 2020, the population and housing unit estimates pertains to the areas within California only.

Data for this web application was derived from the 2010 and 2020 Censuses (2010 and 2020 Census Blocks, 2020 Urban Areas, and Counties) and the 2016-2020 American Community Survey (2010 -Urban Areas) and can be found at data.census.gov.

For more information about the urban area delineations, visit the Census Bureau's Urban and Rural webpage and FAQ.

To view more data from the State of California Department of Finance, visit the Demographic Research Unit Data Hub.

Updated 10/6/2022: In the Time/Distance analysis process, points that were found to have been included initially, but with no significant or year-round population were removed. The layer of removed points is also available for viewing. MCNA - Removed Population PointsThe Network Adequacy Standards Representative Population Points feature layer contains 97,694 points spread across California that were created from USPS postal delivery route data and US Census data. Each population point also contains the variables for Time and Distance Standards for the County that the point is within. These standards differ by County due to the County "type" which is based on the population density of the county. There are 5 county categories within California: Rural (<50 people/sq mile), Small (51-200 people/sq mile), Medium (201-599 people/sq mile), and Dense (>600 people/sq mile). The Time and Distance data is divided out by Provider Type, Adult and Pediatric separately, so that the Time or Distance analysis can be performed with greater detail. HospitalsOB/GYN SpecialtyAdult Cardiology/Interventional CardiologyAdult DermatologyAdult EndocrinologyAdult ENT/OtolaryngologyAdult GastroenterologyAdult General SurgeryAdult HematologyAdult HIV/AIDS/Infectious DiseaseAdult Mental Health Outpatient ServicesAdult NephrologyAdult NeurologyAdult OncologyAdult OphthalmologyAdult Orthopedic SurgeryAdult PCPAdult Physical Medicine and RehabilitationAdult PsychiatryAdult PulmonologyPediatric Cardiology/Interventional CardiologyPediatric DermatologyPediatric EndocrinologyPediatric ENT/OtolaryngologyPediatric GastroenterologyPediatric General SurgeryPediatric HematologyPediatric HIV/AIDS/Infectious DiseasePediatric Mental Health Outpatient ServicesPediatric NephrologyPediatric NeurologyPediatric OncologyPediatric OphthalmologyPediatric Orthopedic SurgeryPediatric PCPPediatric Physical Medicine and RehabilitationPediatric PsychiatryPediatric Pulmonology

Final approved map by the 2020 California Citizens Redistricting Commission for California's United States Congressional Districts; the authoritative and official delineations of California's United States Congressional Districts drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.Each of the 52 Congressional districts apportioned to California have an ideal population of 760,066, and the Commission adhered to federal constitutional mandates by requiring a district population deviation of no more than +/- one person. These districts also posed some of the Commission’s biggest challenges, and, because of strict population equality requirements, resulted in many more splits of counties, cities, neighborhoods, and communities of interest compared to State Assembly or Senate plans.

Final approved map by the 2020 California Citizens Redistricting Commission for the California State Assembly; the authoritative and official delineations of the California State Assembly drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.80 Assembly districts have an ideal population of around 500,000 people each, and in consideration of population equality, the Commission chose to limit the population deviation range to as close to zero percent as practicable. With these districts, the Commission was able to respect many local communities of interest and group similar communities; however, it was more difficult to keep densely populated counties, cities, neighborhoods, and larger communities of interest whole due to the district size and correspondingly smaller number allowable in the population deviation percentage.

The California Monitoring Plan (CMP) salmonid monitoring areas and associated population data are part of an ongoing effort to summarize existing and past salmonid monitoring efforts in the areas identified by Adams et al. 2011. These data are compiled and maintained by the California Department of Fish and Wildlife with the cooperation of monitoring practitioners. Updates and associated outreach are intended to occur on an annual basis. Data were created from several sources and existing datasets: some monitoring areas were accurately depicted using the USGS National Hydrography Dataset (NHD), other monitoring areas were approximated using the monitoring point location and the USGS StreamStats tool to depict the watershed area above that point. The areas are intended to represent the approximate extent of sampling within sub-basins, watershed areas, or regions. For example, the spatial extent of monitoring using a fixed count station is approximated by accounting for all anadromous fish habitat upstream of the sampling location. Therefore, the area is approximated by entering the monitoring location coordinates into the StreamStats tool. The resulting shapefile is then examined to ensure the watershed area did not include habitat above dams or barriers to migration. Areas were clipped when needed. The data user should recognize that errors may have occurred during production of this dataset, changes may have occurred to the external sources used post transfer, and for other possible reasons. The population metrics summarized in the associated tabular data may be regarded as spatially limited, temporally limited, and not considered a complete estimate for the population being described. The data user is advised to refer to the annual reports cited in the Source field from the tabular data for additional details regarding monitoring within the area spatially depicted.Abbreviation Definitions: SGS = Spawning Ground Survey, RM = River Mile, RST = Rotary Screw Trap, RKM = River Kilometer, FCS = Fixed Count Station, STH = Steelhead, CC = Coastal Chinook, DS = Downstream

The 2020 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some states and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

1. Zip code boundaries change, in ways small and large - these are not a stable analysis unit. Data you received keyed to zip codes may have used an earlier and very different boundary for your zip codes of interest.
2. Historically, the United States Postal Service has not published zip code boundaries, and instead, boundary datasets are compiled by third party vendors from address data. That means that the boundary data are not authoritative, and any data you have keyed to zip codes may use a different, vendor-specific method for generating boundaries from the data here.
3. Zip codes are designed to optimize mail delivery, not social, environmental, or demographic characteristics. Analysis using zip codes is subject to create issues with the Modifiable Areal Unit Problem that will bias any results because your units of analysis aren't designed for the data being studied.

The 1998 Dress Rehearsal was conducted as a prelude to the United States Census of Population and Housing, 2000, in the following locations: (1) Columbia, South Carolina, and surrounding areas, including the town of Irmo and the counties of Chester, Chesterfield, Darlington, Fairfield, Kershaw, Lancaster, Lee, Marlboro, Newberry, Richland, and Union, (2) Sacramento, California, and (3) Menominee County, Wisconsin, including the Menominee American Indian Reservation. This collection contains map files showing various levels of geography (in the form of Census Tract Outline Maps, Voting District/State Legislative District Outline Maps, and County Block Maps), TIGER/Line digital files, and Corner Point files for the Census 2000 Dress Rehearsal sites. The Corner Point data files contain the bounding latitude and longitude coordinates for each individual map sheet of the 1998 Dress Rehearsal Public Law (P.L.) 94-171 map products. These files include a sheet identifier, minimum and maximum longitude, minimum and maximum latitude, and the map scale (integer value) for each map sheet. The latitude and longitude coordinates are in decimal degrees and expressed as integer values with six implied decimal places. There is a separate Corner Point File for each of the three map types: County Block Map, Census Tract Outline Map, and Voting District/State Legislative District Outline Map. Each of the three map file types is provided in two formats: Portable Document Format (PDF), for viewing, and Hewlett-Packard Graphics Language (HP-GL) format, for plotting. The County Block Maps show the greatest detail and the most complete set of geographic information of all the maps. These large-scale maps depict the smallest geographic entities for which the Census Bureau presents data -- the census blocks -- by displaying the features that delineate them and the numbers that identify them. These maps show the boundaries, names, and codes for American Indian/Alaska Native areas, county subdivisions, places, census tracts, and, for this series, the geographic entities that the states delineated in Phase 2, Voting District Project, of the Redistricting Data Program. The HP-GL version of the County Block Maps is broken down into index maps and map sheets. The map sheets cover a small area, and the index maps are composed of multiple map sheets, showing the entire area. The intent of the County Block Map series is to provide a map for each county on the smallest possible number of map sheets at the maximum practical scale, dependent on the area size of the county and the density of the block pattern. The latter affects the display of block numbers and feature identifiers. The Census Tract Outline Maps show the boundaries and numbers of census tracts, and name the features underlying the boundaries. These maps also show the boundaries and names of counties, county subdivisions, and places. They identify census tracts in relation to governmental unit boundaries. The mapping unit is the county. These large-format maps are produced to support the P.L. 94-171 program and all other 1998 Dress Rehearsal data tabulations. The Voting District/State Legislative District Outline Maps show the boundaries and codes for voting districts as delineated by the states in Phase 2, Voting District Project, of the Redistricting Data Program. The features underlying the voting district boundaries are shown, as well as the names of these features. Additionally, for states that submit the information, these maps show the boundaries and codes for state legislative districts and their underlying features. These maps also show the boundaries of and names of American Indian/Alaska Native areas, counties, county subdivisions, and places. The scale of the district maps is optimized to keep the number of map sheets for each area to a minimum, but the scale and number of map sheets will vary by the area size of the county and the voting districts and state legislative districts delineated by the states. The Census 2000 Dress Rehearsal TIGER/Line Files consist of line segments representing physical features and governmental and statistical boundaries. The files contain information distributed over a series of record types for the spatial objects of a county. These TIGER/Line Files are an extract of selected geographic and cartographic information from the Census TIGER (Topological

The data for this map is based on the recently released 2010 census data, and shows that all counties within the state registered a population increase except Plumas, Sierra, and Alpine counties. Placer, Kern, and Riverside counties experienced the largest population growth with more than a 25% increase over the past 10 years.

Contained within the 3rd Edition (1957) of the Atlas of Canada is a plate that shows the distribution of population in what is now Canada circa 1851, 1871, 1901, 1921 and 1941. The five maps display the boundaries of the various colonies, provinces and territories for each date. Also shown on these five maps are the locations of principal cities and settlements. These places are shown on all of the maps for reference purposes even though they may not have been in existence in the earlier years. Each map is accompanied by a pie chart providing the percentage distribution of Canadian population by province and territory corresponding to the date the map is based on. It should be noted that the pie chart entitled Percentage Distribution of Total Population, 1851, refers to the whole of what was then British North America. The name Canada in this chart refers to the province of Canada which entered confederation in 1867 as Ontario and Quebec. The other pie charts, however, show only percentage distribution of population in what was Canada at the date indicated. Three additional graphs are included on this plate and show changes in the distribution of the population of Canada from 1867 to 1951, changes in the percentage distribution of the population of Canada by provinces and territories from 1867 to 1951 and elements in the growth of the population of Canada for each ten-year period from 1891 to 1951.

This layer maps population among California census tracts as included in the Communities Environmental Health Screening Tool (CalEnviroScreen) created by the Office of Environmental Health Hazard Assessment (OEHHA) on behalf of the California Environmental Protection Agency (CalEPA)CalEnviroScreen is a screening methodology that can be used to help identify California communities that are disproportionately burdened by multiple sources of pollution. The methodology is described in the current version (3.0) report and supporting documents available at http://oehha.ca.gov/calenviroscreen/report/calenviroscreen-30 .

US Census 2010 selected population and housing characteristics for Orange County, California, across multiple census geographies: County, County Subdivisions, Census Places (cities), Blocks, Tracts, ZIP code tabulation areas, US Congressional districts (111th), State Assembly and Senate Legislative Districts, Elementary, Secondary and Unified School Districts. The US Census geodemographic data are based on the 2010 TigerLines across multiple census geographies. The spatial geographies were merged with SF1 and SF2 demographic data tables for both Housing and Population characteristics.

80 Assembly districts have an ideal population of around 500,000 people each, and in consideration of population equality, the Commission chose to limit the population deviation range to as close to zero percent as practicable. With these districts, the Commission was able to respect many local communities of interest and group similar communities; however, it was more difficult to keep densely populated counties, cities, neighborhoods, and larger communities of interest whole due to the district size and correspondingly smaller number allowable in the population deviation percentage.

Final approved map by the 2020 California Citizens Redistricting Commission for the California State Senate; the authoritative and official delineations of the California State Senate drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.Each of the 40 Senate districts has an ideal population of nearly one million people and represents the largest state legislative districts in the nation. In consideration of population equality, the Commission chose to limit the population deviation as close to zero percent as practicable. Per the California Constitution, the Commission strived to nest two Assembly districts where practicable. However, higher ranking criteria made this difficult in practice. While the size of the Senate districts allowed the Commission to recognize broadly shared interests, these interests did not always overlap exactly with the interests of smaller communities recognized in the related Assembly districts. Based on the large number of people in each district, there were a variety of different interests that were balanced and included.

This time animated interactive map shows census population statistics from 1921 to 2011 for municipalities surrounding the Strait of Georgia.

For the past several censuses, the Census Bureau has invited people to self-respond before following up in-person using census takers. The 2010 Census invited people to self-respond predominately by returning paper questionnaires in the mail. The 2020 Census allows people to self-respond in three ways: online, by phone, or by mail.The 2020 Census self-response rates are self-response rates for current census geographies. These rates are the daily and cumulative self-response rates for all housing units that received invitations to self-respond to the 2020 Census. The 2020 Census self-response rates are available for states, counties, census tracts, congressional districts, towns and townships, consolidated cities, incorporated places, tribal areas, and tribal census tracts.The Self-Response Rate of Los Angeles County is 65.1% for 2020 Census, which is slightly lower than 69.6% of California State rate.More information about these data is available in the Self-Response Rates Map Data and Technical Documentation document associated with the 2020 Self-Response Rates Map or review FAQs.Animated Self-Response Rate 2010 vs 2020 is available at ESRI site SRR Animated Maps and can explore Census 2020 SRR data at ESRI Demographic site Census 2020 SSR Data.Following Demographic Characteristics are included in this data and web maps to visualize their relationships with Census Self-Response Rate (SRR).1. Population Density: 2020 Population per square mile,2. Poverty Rate: Percentage of population under 100% FPL,3. Median Household income: Based on countywide median HH income of $71,538.4. Highschool Education Attainment: Percentage of 18 years and older population without high school graduation.5. English Speaking Ability: Percentage of 18 years and older population with less or none English speaking ability. 6. Household without Internet Access: Percentage of HH without internet access.7. Non-Hispanic White Population: Percentage of Non-Hispanic White population.8. Non-Hispanic African-American Population: Percentage of Non-Hispanic African-American population.9. Non-Hispanic Asian Population: Percentage of Non-Hispanic Asian population.10. Hispanic Population: Percentage of Hispanic population.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

This data contains a critical habitat boundary profile for gnatcatcher, tiger salamander, and california amole populations along the central coast. Maps outline specific critical areas and provides distribution of gnatcatcher populations. All maps are available on ArcView.