The legislative districts contain the geographically defined territories used for representation in the California State Assembly, California State Senate and the U.S. House of Representatives from California. These three boundary layers were approved by the California Citizens Redistricting Commission in 2021 following the completion of the 2020 United States Census.

California State Senate district boundaries intended for the NEVI map.Data downloaded in October 2024 from https://gis.data.ca.gov/maps/b31d93f08c074753b89f8cbb0b8beed9/about.

Polygon layers for the 2011 and 2022 Senate district boundaries and the 2022 Assembly district boundaries.

Final approved map by the 2020 California Citizens Redistricting Commission for the California State Senate. Final approved map by the 2020 California Citizens Redistricting Commission for the California State Senate; the authoritative and official delineations of the California State Senate drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State. Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry. Each of the 40 Senate districts has an ideal population of nearly one million people and represents the largest state legislative districts in the nation. In consideration of population equality, the Commission chose to limit the population deviation as close to zero percent as practicable. Per the California Constitution, the Commission strived to nest two Assembly districts where practicable. However, higher ranking criteria made this difficult in practice. While the size of the Senate districts allowed the Commission to recognize broadly shared interests, these interests did not always overlap exactly with the interests of smaller communities recognized in the related Assembly districts. Based on the large number of people in each district, there were a variety of different interests that were balanced and included.

This web map of California legislative districts includes the geographically defined territories used for representation in the California State Assembly, California State Senate and the US House of Representatives from California. These three boundary layers are derived from the US Census Bureau's 2018 TIGER/Line database and are designed to overlay with the California Department of Education’s (CDE) education related GIS content.The 80 California State Assembly Districts represent the geographically defined territories used for electing members to the lower (house) chamber of the California State Legislature. The current state assembly boundaries were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020.The 40 state senate districts represent the geographically defined territories used for electing members to the upper (senate) chamber of the California State Legislature. The current state senate boundaries were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020.The 53 congressional districts within the State of California represent the geographically defined territories used for electing members to the U.S. House of Representatives. The current U.S. Congressional boundaries in California were determined by the California Citizens Redistricting Commission following the completion of the 2010 United States Census and will remain valid until 2020

Download In State Plane Projection Here. Boundaries for electing senators to the Illinois Senate as established by that body. Update Frequency: This dataset is updated on a weekly basis.

Senate Districts for the State of California

The 2023 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. State Legislative Districts (SLDs) are the areas from which members are elected to state legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by state participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, New Hampshire, Wisconsin, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation. The generarlized boundaries in this file are based on the most recent state legislative district boundaries collected by the Census Bureau for the 2022 election year and provided by state-level participants through the RDP.

The State Senate Districts layer contains polygons for California State Senate Districts. The source for the information in this layer is the Los Angeles Registrar/Recorder's Precinct Information File (PIF), which is designed to match the Thomas Brothers TRNL (road network) layer. Where boundaries are defined by streets, water, city boundaries, or other features, those arc segments are copied to the districts layer, so that the boundaries and other layer features match perfectly.

The State Senate Districts layer contains polygons for California State Senate Districts. The source for the information in this layer is the Los Angeles County Registrar-Recorder's Precinct Information File (PIF), The boundaries are based on the 2020 Census as provided by the California Secretary of State in 2021.Where boundaries are defined by streets, water bodies, city boundaries, or other features, those boundaries are copied to the districts layer, so that the boundaries and other layer features match perfectly.Last Update: March 2022

The 2020 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. State Legislative Districts (SLDs) are the areas from which members are elected to State legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by State participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, Maine, Maryland, Massachusetts, Michigan, Ohio, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation. The generalized boundaries in this file are based on the most recent state legislative district boundaries collected by the Census Bureau for the 2018 election year and provided by state-level participants through the RDP.

abstract: This is a map of California State Senate Districts with representatives elected before redistricting. Geography is based on boundary lines published by the California Redistricting Commission. Senate member information is updated daily.This is a map of California State Senate Districts (pre-redistricting). Senate member information is updated daily.Senate (Elected Pre Redisticting)

Senate Districts in California with boundaries showing active, deferred, and accelerated district boundaries until the 2024 Election. This data is available at a public level for everyone to use.The active districts are comprised of even district numbers with Senators elected in 2022. These even districts use the boundaries edited in the 2020 Census. They were finalized in 2021 so that is why the districts are referenced with that date. The first election they were ready to be used in was the 2022 Election, but not the 2020 election. The 2020 Election used the boundaries of the districts created in the 2010 Census (finalized in 2011). The odd numbered senate districts used the 2011 boundaries in the 2020 election. These odd senate districts will change to the 2021 Certified districts with the 2024 election cycle. Until then the odd numbered 2011 Certified Senate districts are still active. These even and odd districts are labelled as Active Districts in the layer.Since some of these boundaries were changed, there is overlap of some of the odd and even districts. They are referred to as Accelerated Districts and they occur where an existing odd-district is overlain by a new even-district. The constituents in the accelerated areas will have two Senators who may represent them.Some of the district boundaries were changed so that there are gaps with no district coverage at all. If there is a gap in coverage, the area is referred to as a Deferred District. They occur when an area that was an even-numbered district in the 2011 redistricting plan becomes an odd-numbered district in the 2021 redistricting plan. The area does not have a Senator until the conclusion of the 2024 election when the new odd-numbered district becomes active. During the 2023-2024 session the Senate Rules Committee assigns Senators to provide constituent services in deferred areas.

The California Department of Transportation (Caltrans) and the California Energy Commission (CEC) are partnering to implement the federal National Electric Vehicle Infrastructure (NEVI) Program, which allocates $5 billion to the states to create a nationwide, interconnected network of DC fast chargers along the National Highway Systems. California's share will be $384 million over 5 years. This map was developed to help prospective applicants and interested parties identify eligible areas for infrastructure deployment.InstructionsViewers can display corridor groups, corridor segments, electric vehicle (EV) charging stations, Justice40 disadvantaged communities, Tribal lands, California-designated low-income or disadvantaged communities, metropolitan planning organizations, regional transportation planning agencies, California state legislative districts, counties, Caltrans districts, utility districts, and congressional districts in this interactive map. The map initially displays corridor groups and their corridor segments included in the Round 2 NEVI solicitation. Viewers can toggle individual layers on and off using the map layers menu located to the right of the map. Some layers are organized into groups; viewers can toggle all layers within a group or select specific ones. The legend to the left of the map will show the layers that have been turned on. There is a search tool to the right of the map that enables viewers to type in an address and locate the address on the map. A basemap selector allows viewers to view road detail. Additional information on the map can be found under the information icon. Viewers can download the map files by clicking on the Data and Supplemental Links icon. Map layers include:A Corridor groups layer that shows designated corridor groups for California's NEVI funding program. Users can click on a corridor segment to view the start and end of each segment within a corridor group. When selected, a pop-up window will appear that identifies the corridor group number, corridor segment, corridor name, minimum number of charging stations required, minimum number of ports required, and needed locations, if applicable, for the corridor segment. Corridor group labels for enhanced accessibility. Note that labels are only visible at certain ranges (zoom in and out to view labels). A NEVI 2 corridors layer shows corridor groups eligible for Round 2 of California's NEVI funding program. NEVI 2 corridor group labels for enhanced accessibility. Note that labels are only visible at certain ranges (zoom in and out to view labels). NEVI 2 corridor segment labels for enhanced accessibility. Note that labels are only visible at certain ranges (zoom in and out to view labels). A Round 1 solicitation corridor groups layer that shows corridor groups eligible for Round 1 of California's NEVI funding program. A layer showing California and Justice40 disadvantaged or low-income communities. A layer showing California-designated disadvantaged or low-income communities. A layer showing Justice40-designated disadvantaged communities. A layer showing California Federally Recognized Tribal Lands. A layer showing Metropolitan Planning Organizations. A layer showing Regional Transportation Planning Agencies. A layer showing California State Senate Districts. A layer showing California State Assembly Districts. A layer showing California Counties. EV charging stations layers (existing DC fast charging stations that are located within one mile of a NEVI-eligible corridor offramp). One layer shows locations of EV charging stations with DC fast charging capabilities that meet the NEVI power level and four-port minimum requirement and could likely become part of the NEVI network if these stations became compliant with other NEVI program requirements such as data reporting. The other layer shows DC fast charging stations that do not meet NEVI power-level or port count requirements but could be upgraded to be NEVI-compliant. Users can click on EV charging stations and a pop-up window will appear with more information on the station (i.e., station address, total port count, minimum NEVI standard, etc.). These data were last updated in March 2024. Please refer to the Department of Energy's Alternative Fuels Data Center and PlugShare for up-to-date existing and planned DC fast charger site information. A layer showing Caltrans Districts. A layer showing Electric Utilities (IOUs and POUs). A layer showing California Congressional Districts. BackgroundThe $5 billion NEVI Program is part of the $1.2 trillion Infrastructure Investment and Jobs Act (IIJA) signed into law by President Biden in November 2021. IIJA commits significant federal funding to clean transportation and energy programs throughout the U.S. to reduce climate changing greenhouse gas emissions. Caltrans is the designated lead agency for NEVI. The CEC is their designated state energy partner. Caltrans and the CEC have partnered to create California's Deployment Plan for the National Electric Vehicle Infrastructure Program that describes how the state plans to allocate its $384 million share of federal NEVI funds to build out a network of modern, high-powered DC fast chargers along federally designated Alternative Fuel Corridors throughout California. California's latest NEVI Deployment Plan was submitted to the Joint Office of Energy and Transportation on August 1, 2023 and approved on September 29, 2023. The Plans must be updated each year over 5 years.NEVI funds must be used initially on federally-designated Alternative Fuel Corridors (shown on the map).Each NEVI-funded DC fast charge station will have a minimum of four 150 kW Combined Charging System (CCS) connectors. Stations will be located no more than 50 miles apart along freeways and highways and no more than 1 mile from a freeway exit or highway roadway. States are required to emphasize equity, with at least 40 percent of NEVI benefits going to disadvantaged, low income, rural and Tribal communities.Data SourcesData are from the Federal Highway Administration's Alternative Fuel Corridors website, the U.S. Department of Energy's Alternative Fuels Data Center Station Data for Alternative Fuel Corridors (as of September 2022), Argonne National Laboratory's Electric Vehicle Charging Justice40 Map, and the California Air Resources Board's Map of California Climate Investments Priority Populations 2022 CES 4.0. ContactPlease submit questions and comments to mediaoffice@energy.ca.gov

The aquifer risk map is being developed to fulfill requirements of SB-200 and is intended to help prioritize areas where domestic wells and state small water systems may be accessing groundwater that does not meet primary drinking water standards (maximum contaminant level or MCL). In accordance with SB-200, the risk map is to be made available to the public and is to be updated annually starting January 1, 2021. The Fund Expenditure Plan states the risk map will be used by Water Boards staff to help prioritize areas for available SAFER funding.This layer contains several reference boundaries, including:California County boundariesCensus Tract boundaries with Disadvantaged Community Status (based on Median Household Income)California Assembly District boundariesCalifornia Senate District boundariesCalifornia Regional Water Board boundariesCV-SALTS priority groundwater basinsGroundwater Sustainability Agency boundariesGroundwater Unit boundaries

This dataset is one from a series of district layers pertaining to California Senate Districts that are derived from the California State Senate information. All data layers are reprojected into the SCAG standard projection. The following district layer is included in the series: Senate_districts: Current California Senate Districts based on the new district boundaries enacted into state law on September 13, 2001, and signed into law on September 13, 2001, and signed into law on September 26, 2001 for use with the March 2002 primary election The boundary has been updated as of 11/2011

Interactive GIS Mapping Tool – Urgent Drinking Water Needs (UDWN) Web Map in California

Use Constraints:

This mapping tool is for reference and guidance purposes only and is not a binding legal document to be used for legal determinations. The data provided may contain errors, inconsistencies, or may not in all cases appropriately represent the current status of Urgent Drinking Water Needs project locations. The data in this map are subject to change at any time and should not be used as the sole source for decision making. By using this data, the user acknowledges all limitations of the data and agrees to accept all errors stemming from its use. The Urgent Drinking Water Needs map does not provide the locations of individual households that were provided funding through grant agreements with non-profit organizations.

Description:

This map displays Urgent Drinking Water Needs due to drought, contamination, or other eligible emergencies. This includes projects approved for funding from July 1, 2014 to November 18, 2022, including both active and completed projects. The data comes from the State Water Resources Control Board (SWRCB) Cleanup and Abatement Account’s (CAA) project database and was exported on November 18, 2022. The map contains four layers: UDWN_Projects, UDWN_Summary_by_county, CA_Assembly_Districts_WEB, and CA_Senate_Districts_WEB.

The attributes for each project in the UDWN_Projects layer include the recipient of grant funding (grantee), community served, type of project, grant amount, funding program, date the project was approved, date the project was completed, Disadvantaged Community status, Small Disadvantaged Community status, the public water system number, status of the project (Active or Completed), and the state fiscal year in which the project was approved.

How to Use the Interactive Mapping Tool:When the map loads, it displays the state of California, UDWN Project locations, and California county boundaries. The “About” tab is located on the left-hand side of the map and displays instructions for using the map. The next tab display pre-set filters, the legend, and a layer list. Clicking on the “Legend” tab in the menu will show the legend of the map. Projects that appear as blue dots are still active, while projects that appear as red dots have already been completed.Note: Layers that show CA Assembly and Senate Districts were created by the Sierra Nevada Conservancy (SNC). These layers must be toggled on in the layers list to be seen. To view information about a specific project, click on a project location. A pop-up box will appear with the following information: (a) county name, (b) community served, (c) type of project, (d) approved funding amount, (e) approval date, and (f) status. To view information about the total funding and number of projects in a county, click within a county boundary and a pop up will appear.Use the pre-set filters to filter projects by status, fiscal year, funding program, county, assembly district, and/or senate district using the drop-down menu. The filters can be toggled on or off using the switches on the right side of the menu. To create a custom filter, click the filter icon at the bottom of the preset filter menu and enter the desired parameters. For one parameter, click “add expression” to create a custom filter. For more than one, click “add set” to create a custom filter.To export and download filtered data, open the Attribute Table located at the bottom of the map, click the “Options” drop down menu, select “Export all to CSV” from the drop-down menu, and download the desired information.

Map Layers:UDWN_Projects – This layer shows all active or completed UDWN projects from July 1, 2014 to November 18, 2022. Active projects are represented with blue dots while completed projects are represented with red dots. The attributes in this layer include what county the project is in, the community served, the type of project, approved funding amount, approval date, and status.UDWN_Summary_by_county – This layer shows the boundary lines for all the counties in California. The attributes in this layer include the total number of projects and total funding approved in that county since July 1, 2014. CA_Assembly_Districts_WEB – This layer shows the boundary lines for all the assembly districts in California. It is owned and maintained by the Sierra Nevada Conservancy (SNC) and boundaries may not be accurate. CA_Senate_Districts_WEB – This layer shows the boundary lines for all the senate districts in California. It is owned and maintained by the Sierra Nevada Conservancy (SNC) and boundaries may not be accurate.

Informational Pop-up Box:County – California county where the project is locatedCommunity Served – California community that is benefiting from UDWN funding Type of Project – Project type, which can include bottled water, consolidation, hauled water, pilot study, POU, pump, tank, treatment, and well Approved Funding Amount – Amount of money in U.S. dollars approved for the projectApproval Date – Date that the project was approved for fundingStatus – Current status of the project (active or closed)Date Created:

Data created on November 18, 2022 and valid up to this date.

Sources:

Urgent Drinking Water Needs data was exported from the CAA Database.

The Sierra Nevada Conservancy (SNC) created the California Senate and Assembly layers.

Points of Contact:

Christina Raynard is the creator and owner of this layer. Christina.raynard@waterboards.ca.gov (State Water Resources Control Board, Division of Financial Assistance)

Terms of Use

No special restrictions or limitations on using the item’s content have been provided.

This is the last boundary change until the next redistricting following the 2030 Census. All of the districts now reflect the 2021 Citizens Redistricting Commission(CRC) plan. The only thing that will change is the members' names and parties as elections are held, appointments are made, or party affiliations change.Senate Districts feature layer is updated as-needed and we expect to update it more regularly in the future.Schema:F2020_POP: The 2020 population of the district as reported by the census.F2020_HU: Number of housing units in the district in 2020 as reported by the census.CRC_POP: Citizen's Redistricting Commission population.District: The District is the district number.Party: The Party is the party represented.last_name: The last name is the last name of the representative.first_name: The first name is the first name of the representative.district_website: The district website is the link to the district website.For more information about the F2020_Pop and the F2020_HU visit: https://www.census.gov/programs-surveys/decennial-census/about/rdo/summary-files.html

Polygon layers for the 2011 and 2022 Senate district boundaries and the 2022 Assembly district boundaries.