The statistic shows the ten largest cities in Australia in 2021. In 2021, around 5.26 million people lived in Sydney and the surrounding area, making it the most populous city in Australia.

Population: Resident: Estimated: Australian Capital Territory data was reported at 475,644.000 Person in Sep 2024. This records an increase from the previous number of 473,855.000 Person for Jun 2024. Population: Resident: Estimated: Australian Capital Territory data is updated quarterly, averaging 326,516.500 Person from Jun 1981 (Median) to Sep 2024, with 174 observations. The data reached an all-time high of 475,644.000 Person in Sep 2024 and a record low of 227,581.000 Person in Jun 1981. Population: Resident: Estimated: Australian Capital Territory data remains active status in CEIC and is reported by Australian Bureau of Statistics. The data is categorized under Global Database’s Australia – Table AU.G002: Estimated Resident Population.

These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and Local Government Areas (LGAs), and are projected out from a base population as at 30 June 2022, by age and sex. Projections are for 30 June 2023 to 2032, with results disaggregated by age and sex.

Method The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) within each age-sex cohort according to the specified fertility, mortality and overseas and internal migration assumptions. The projected usual resident population by single year of age and sex was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.

Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.

Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.

Projections – Local Government Areas The base population for each LGA is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. Projections for 30 June 2023 to 2032 were created by converting from the SA2-level population projections to LGAs by age and sex. This was done using an age-specific population correspondence, where the data for each year of the projection span were converted based on 2021 population shares across SA2s. The LGA and SA2 projections are congruous in aggregation as well as in isolation. Unlike the projections prepared at SA2 level, no LGA-specific projection assumptions were used.

Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts, but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations and very small age-sex cells, especially at older ages. While these projections are calculated at the single year of age level, small numbers, and fluctuations across individual ages in the base population and projection assumptions limit the reliability of SA2-level projections at single year of age level. These fluctuations reduce and reliability improves when the projection results are aggregated to broader age groups such as the five-year age bands in this product. For areas with small elderly populations, results aggregated to 65 and over are more reliable than for the individual age groups above 65. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all, however their (small) age/sex distributions may change slightly. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections by age and sex include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state age/sex totals, being applied to their original values. SA2s and LGAs in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.

Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics If you have questions or feedback about this web service, please email geography@abs.gov.au. To subscribe to updates about ABS web services and geospatial products, please complete this form. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Population Projections, Australia, 2022 (base)

Population Change: Change Over Previous Quarter: Australian Capital Territory data was reported at 1,789.000 Person in Sep 2024. This records an increase from the previous number of 1,263.000 Person for Jun 2024. Population Change: Change Over Previous Quarter: Australian Capital Territory data is updated quarterly, averaging 1,405.000 Person from Sep 1981 (Median) to Sep 2024, with 173 observations. The data reached an all-time high of 4,139.000 Person in Mar 2017 and a record low of -680.000 Person in Sep 2021. Population Change: Change Over Previous Quarter: Australian Capital Territory data remains active status in CEIC and is reported by Australian Bureau of Statistics. The data is categorized under Global Database’s Australia – Table AU.G003: Population Change.

Quarterly estimates of total resident population for states, territories and Australia. Includes estimates of the population by sex in five-year age groups; numbers (and some rates) of births, deaths, infant deaths, interstate and overseas movements; quarterly and/or annual time series spreadsheets; projected resident population for states, territories and Australia; and projected number of households for capital cities, states territories and Australia.

These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and Local Government Areas (LGAs), and are projected out from a base population as at 30 June 2022, by age and sex. Projections are for 30 June 2023 to 2032, with results disaggregated by age and sex.

Method The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) within each age-sex cohort according to the specified fertility, mortality and overseas and internal migration assumptions. The projected usual resident population by single year of age and sex was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.

Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.

Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.

Projections – Local Government Areas The base population for each LGA is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. Projections for 30 June 2023 to 2032 were created by converting from the SA2-level population projections to LGAs by age and sex. This was done using an age-specific population correspondence, where the data for each year of the projection span were converted based on 2021 population shares across SA2s. The LGA and SA2 projections are congruous in aggregation as well as in isolation. Unlike the projections prepared at SA2 level, no LGA-specific projection assumptions were used.

Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts, but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations and very small age-sex cells, especially at older ages. While these projections are calculated at the single year of age level, small numbers, and fluctuations across individual ages in the base population and projection assumptions limit the reliability of SA2-level projections at single year of age level. These fluctuations reduce and reliability improves when the projection results are aggregated to broader age groups such as the five-year age bands in this product. For areas with small elderly populations, results aggregated to 65 and over are more reliable than for the individual age groups above 65. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all, however their (small) age/sex distributions may change slightly. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections by age and sex include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state age/sex totals, being applied to their original values. SA2s and LGAs in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.

Data and geography references

Source data publication: Population Projections, Australia, 2022 (base) to 2071 Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3 Further information: Population Projections, Australia methodology Source: Australian Bureau of Statistics (ABS)

Made possible by the Digital Atlas of Australia

The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics

Email geography@abs.gov.au if you have any questions or feedback about this

Contains projections (based on different assumptions of future fertility, mortality and migration) of the resident population of Australia, the states and territories, capital cities and balance of …Show full descriptionContains projections (based on different assumptions of future fertility, mortality and migration) of the resident population of Australia, the states and territories, capital cities and balance of states, by age and sex for the base year to 2101 (for Australia) and for the base year to 2061 (for the states and territories, capital cities and balances of states). Also includes summary measures such as percentages of population in selected age groups and median ages as well as detailed notes on the assumptions used.

Australia Cities Database

Below is a list of 1,035 prominent cities in Australia. Each row includes a city's latitude, longitude, state, population and other variables of interest. This is a subset of all 13,842 places in Australia (and only some of the fields) that you'll find in our World Cities Database. This data subset is released for free under an MIT license. Notable Cities: The capital of Australia is Canberra, which is in the territory of Australian Capital Territory. The largest city in Australia is Sydney, with an urban population of 5,312,163.

Data Source

Data is downloaded from https://simplemaps.com/data/world-cities, sbset of a major dataset that is included all cities of the world. You can find more on Simple Maps.

Inspiration

This data is useful to be joined to other datasets for Australia.

As of June 2023, in the Australian Capital Territory, about 8.9percent of the population was between 30 and 34 years old. In comparison, just 1.6 percent of the population was over the age of 85.

These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and are projected out from a base population as of 30 June 2022. Projections are for 30 June 2023 to 2032.

Method The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) according to the specified fertility, mortality and overseas and internal migration assumptions. The projected usual resident population by single year was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.

Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.

Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.

Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state totals, being applied to their original values. SA2s in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.

Data and geography references

Source data publication: Population Projections, Australia, 2022 (base) to 2071 Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3 Further information: Population Projections, Australia methodology Source: Australian Bureau of Statistics (ABS)

Made possible by the Digital Atlas of Australia

The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics

Email geography@abs.gov.au if you have any questions or feedback about this web service.
Subscribe to get updates on ABS web services and geospatial products.

Privacy at the Australian Bureau of Statistics Read how the ABS manages personal information - ABS privacy policy.

Contains latest available estimates of the resident populations of areas of Australia as at 30 June in each year . These estimates are provided for Statistical Areas Level 2 - 4 (SA2s - SA4s), Greater Capital City Statistical Areas (GCCSAs), and states and territories of Australia according to the current edition of the Australian Statistical Geography Standard (ASGS). Estimates are also provided for Local Government Areas (LGAs), Significant Urban Areas, Remoteness Areas, and Commonwealth and State Electoral Divisions.

This information has been provided by the Australian Bureau of Statistics. For further information see www.abs.gov.au. Projected population growth of Australian capital cities (medium growth scenario), 2012-2061. From: Population projections, Australia, 2012 (base) to 2101, cat.no. 3222.0.

Data ued to produce Figure BLT2 in Built environment, SoE 2016. See https://soe.environment.gov.au/theme/built-environment/topic/2016/increased-urban-footprint#built-environment-figure-BLT2

This dataset presents the preliminary estimates of the resident population by age and sex as at 30 June 2017. The data is aggregated to Greater Capital City Statistical Areas (GCCSA), according to …Show full descriptionThis dataset presents the preliminary estimates of the resident population by age and sex as at 30 June 2017. The data is aggregated to Greater Capital City Statistical Areas (GCCSA), according to the 2016 edition of the Australian Statistical Geography Standard (ASGS). Estimated resident population (ERP) is the official estimate of the Australian population, which links people to a place of usual residence within Australia. Usual residence within Australia refers to that address at which the person has lived or intends to live for six months or more in a given reference year. For the 30 June reference date, this refers to the calendar year around it. Estimates of the resident population are based on Census counts by place of usual residence (excluding short-term overseas visitors in Australia), with an allowance for Census net undercount, to which are added the estimated number of Australian residents temporarily overseas at the time of the Census. A person is regarded as a usual resident if they have been (or expected to be) residing in Australia for a period of 12 months or more over a 16-month period. This data is ABS data (catalogue number: 3235.0) available from the Australian Bureau of Statistics. For more information please visit the Explanatory Notes. AURIN has spatially enabled the data. Regions which contain unpublished data have been left blank in the dataset. Copyright attribution: Government of the Commonwealth of Australia - Australian Bureau of Statistics, (2018): ; accessed from AURIN on 12/16/2021. Licence type: Creative Commons Attribution 4.0 International (CC BY 4.0)

ABS Statistics about the population, density and components of change (births, deaths, migration) for Australia's capital cities and regions.This dataset is based on ABS Population estimates and components by LGA Excel files as data sources.

Contains latest available estimates by age and sex of the resident populations of areas of Australia as at 30 June. These estimates are provided for Statistical Areas Level 2 - 4 (SA2s - SA4s), Greater Capital City Statistical Areas (GCCSAs), and states and territories of Australia according to the current edition of the Australian Statistical Geography Standard (ASGS). Estimates are also provided for Local Government Areas (LGAs).

Population Change: Natural Increase: Australian Capital Territory data was reported at 627.000 Person in Sep 2024. This records a decrease from the previous number of 832.000 Person for Jun 2024. Population Change: Natural Increase: Australian Capital Territory data is updated quarterly, averaging 803.000 Person from Jun 1981 (Median) to Sep 2024, with 174 observations. The data reached an all-time high of 1,007.000 Person in Mar 2014 and a record low of 581.000 Person in Jun 2001. Population Change: Natural Increase: Australian Capital Territory data remains active status in CEIC and is reported by Australian Bureau of Statistics. The data is categorized under Global Database’s Australia – Table AU.G003: Population Change.

Contains projections (based on different assumptions of future fertility, mortality and migration) of the resident population of Australia, the states and territories, capital cities and balance of states, by age and sex for the base year to 2101 (for Australia) and for the base year to 2061 (for the states and territories, capital cities and balances of states). Also includes summary measures such as percentages of population in selected age groups and median ages as well as detailed notes on the assumptions used.

In the Australian Capital Territory, about 1.35 children were born per woman in the period of 2022 to 2023. This figure represents a slight decrease compared to the previous year.

This bar chart displays birth rate (per 1,000 people) by capital city using the aggregation average, weighted by population in Australia and New Zealand. The data is filtered where the date is 2021. The data is about countries per year.

Abstract

This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.

Australian Bureau of Statistics (ABS) Catalogue Number: 3218.0 Population Estimates by Local Government Area, 2011 to 2012.

Dataset History

ABS Catalogue Number 3218.0 Population Estimates by Local Government Area, 2011 to 2012.

This dataset was downloaded as a single spreadsheet file (.xls) on 29 May, 2014 from the following website: http://www.abs.gov.au/AUSSTATS/abs@.nsf/DetailsPage/3218.02011-12?OpenDocument

(Metadata taken from the Explanatory Notes section of the ABS website http://www.abs.gov.au/AUSSTATS/abs@.nsf/Lookup/3218.0Explanatory%20Notes12011-12?OpenDocument)

INTRODUCTION

1 This product contains estimates of the resident population of Statistical Areas Level 2 to 4 (SA2s - SA4s) and Greater Capital City Statistical Areas (GCCSAs) of Australia. These estimates plus those for Local Government Areas, Significant Urban Areas, Remoteness Areas and Electoral Divisions are also provided in the Downloads tab of this issue.

2 To meet the conflicting demands for accuracy and timeliness there are several versions of sub-state/territory population estimates. Preliminary estimates as at 30 June are normally available by April of the following year, revised estimates twelve months later and rebased and final estimates after the following Census. The estimates in this issue are preliminary rebased for 2011, based on the results of the 2011 Census, and preliminary for 2012.

For an ABS Glossary of Terms visit:

http://www.abs.gov.au/ausstats/abs@.nsf/Lookup/2901.0Main%20Features12011

Dataset Citation

Australian Bureau of Statistics (2013) ABS Regional Population Growth Australia 2011-2012. Bioregional Assessment Source Dataset. Viewed 29 September 2017, http://data.bioregionalassessments.gov.au/dataset/c27fc127-3743-4805-b4b6-f50712cd655f.