The 2010 Census Production Settings Demographic and Housing Characteristics (DHC) Demonstration Noisy Measurement File (2023-06-30) is an intermediate output of the 2020 Census Disclosure Avoidance System (DAS) TopDown Algorithm (TDA) (as described in Abowd, J. et al [2022] https://doi.org/10.1162/99608f92.529e3cb9 , and implemented in https://github.com/uscensusbureau/DAS_2020_Redistricting_Production_Code). The NMF was produced using the official “production settings,” the final set of algorithmic parameters and privacy-loss budget allocations, that were used to produce the 2020 Census Redistricting Data (P.L. 94-171) Summary File and the 2020 Census Demographic and Housing Characteristics File. The NMF consists of the full set of privacy-protected statistical queries (counts of individuals or housing units with particular combinations of characteristics) of confidential 2010 Census data relating to the 2010 Demonstration Data Products Suite – Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File – Production Settings (2023-04-03). These statistical queries, called “noisy measurements” were produced under the zero-Concentrated Differential Privacy framework (Bun, M. and Steinke, T [2016] https://arxiv.org/abs/1605.02065; see also Dwork C. and Roth, A. [2014] https://www.cis.upenn.edu/~aaroth/Papers/privacybook.pdf) implemented via the discrete Gaussian mechanism (Cannone C., et al., [2023] https://arxiv.org/abs/2004.00010), which added positive or negative integer-valued noise to each of the resulting counts. The noisy measurements are an intermediate stage of the TDA prior to the post-processing the TDA then performs to ensure internal and hierarchical consistency within the resulting tables. The Census Bureau has released these 2010 Census demonstration data to enable data users to evaluate the expected impact of disclosure avoidance variability on 2020 Census data. The 2010 Census Production Settings Demographic and Housing Characteristics (DHC) Demonstration Noisy Measurement File (2023-04-03) has been cleared for public dissemination by the Census Bureau Disclosure Review Board (CBDRB-FY22-DSEP-004).

The 2010 Census Production Settings Demographic and Housing Characteristics Demonstration Noisy Measurement File includes zero-Concentrated Differentially Private (zCDP) (Bun, M. and Steinke, T [2016]) noisy measurements, implemented via the discrete Gaussian mechanism. These are estimated counts of individuals and housing units included in the 2010 Census Edited File (CEF), which includes confidential data initially collected in the 2010 Census of Population and Housing. The noisy measurements included in this file were subsequently post-processed by the TopDown Algorithm (TDA) to produce the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) (https://www2.census.gov/programs-surveys/decennial/2020/program-management/data-product-planning/2010-demonstration-data-products/04-Demonstration_Data_Products_Suite/2023-04-03/). As these 2010 Census demonstration data are intended to support study of the design and expected impacts of the 2020 Disclosure Avoidance System, the 2010 CEF records were pre-processed before application of the zCDP framework. This pre-processing converted the 2010 CEF records into the input-file format, response codes, and tabulation categories used for the 2020 Census, which differ in substantive ways from the format, response codes, and tabulation categories originally used for the 2010 Census.

The NMF provides estimates of counts of persons in the CEF by various characteristics and combinations of characteristics including their reported race and ethnicity, whether they were of voting age, whether they resided in a housing unit or one of 7 group quarters types, and their census block of residence after the addition of discrete Gaussian noise (with the scale parameter determined by the privacy-loss budget allocation for that particular query under zCDP). Noisy measurements of the counts of occupied and vacant housing units by census block are also included. Lastly, data on constraints—information into which no noise was infused by the Disclosure Avoidance System (DAS) and used by the TDA to post-process the noisy measurements into the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) —are provided.

Population estimates by the U.S. Census Bureau by U.S. Census Block.

The 2010 Census Production Settings Redistricting Data (P.L. 94-171) Demonstration Noisy Measurement Files are an intermediate output of the 2020 Census Disclosure Avoidance System (DAS) TopDown Algorithm (TDA) (as described in Abowd, J. et al [2022], and implemented in https://github.com/uscensusbureau/DAS_2020_Redistricting_Production_Code). The NMF was produced using the official "production settings," the final set of algorithmic parameters and privacy-loss budget allocations that were used to produce the 2020 Census Redistricting Data (P.L. 94-171) Summary File and the 2020 Census Demographic and Housing Characteristics File. The NMF consists of the full set of privacy-protected statistical queries (counts of individuals or housing units with particular combinations of characteristics) of confidential 2010 Census data relating to the redistricting data portion of the 2010 Demonstration Data Products Suite - Redistricting and Demographic and Housing Characteristics File - Production Settings (2023-04-03). These statistical queries, called "noisy measurements" were produced under the zero-Concentrated Differential Privacy framework (Bun, M. and Steinke, T [2016]; see also Dwork C. and Roth, A. [2014]) implemented via the discrete Gaussian mechanism (Cannone C., et al., [2023]), which added positive or negative integer-valued noise to each of the resulting counts. The noisy measurements are an intermediate stage of the TDA prior to the post-processing the TDA then performs to ensure internal and hierarchical consistency within the resulting tables. The Census Bureau has released these 2010 Census demonstration data to enable data users to evaluate the expected impact of disclosure avoidance variability on 2020 Census data. The 2010 Census Production Settings Redistricting Data (P.L. 94-171) Demonstration Noisy Measurement Files (2023-04-03) have been cleared for public dissemination by the Census Bureau Disclosure Review Board (CBDRB-FY22-DSEP-004). The data include zero-Concentrated Differentially Private (zCDP) (Bun, M. and Steinke, T [2016]) noisy measurements, implemented via the discrete Gaussian mechanism. These are estimated counts of individuals and housing units included in the 2010 Census Edited File (CEF), which includes confidential data initially collected in the 2010 Census of Population and Housing. The noisy measurements included in this file were subsequently post-processed by the TopDown Algorithm (TDA) to produce the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) (https://www2.census.gov/programs-surveys/decennial/2020/program-management/data-product- planning/2010-demonstration-data-products/04 Demonstration_Data_Products_Suite/2023-04-03/). As these 2010 Census demonstration data are intended to support study of the design and expected impacts of the 2020 Disclosure Avoidance System, the 2010 CEF records were pre-processed before application of the zCDP framework. This pre-processing converted the 2010 CEF records into the input-file format, response codes, and tabulation categories used for the 2020 Census, which differ in substantive ways from the format, response codes, and tabulation categories originally used for the 2010 Census. The NMF provides estimates of counts of persons in the CEF by various characteristics and combinations of characteristics, including their reported race and ethnicity, whether they were of voting age, whether they resided in a housing unit or one of 7 group quarters types, and their census block of residence, after the addition of discrete Gaussian noise (with the scale parameter determined by the privacy-loss budget allocation for that particular query under zCDP). Noisy measurements of the counts of occupied and vacant housing units by census block are also included. Lastly, data on constraints--information into which no noise was infused by the Disclosure Avoidance System (DAS) and used by the TDA to post-process the noisy measurements into the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) --are provided. These data are available for download (i.e. not restricted access). Due to their size, they must be downloaded through the link on this

This data collection contains summary statistics on population and housing subjects derived from the responses to the 2010 Census questionnaire. Population items include sex, age, average household size, household type, and relationship to householder such as nonrelative or child. Housing items include tenure (whether a housing unit is owner-occupied or renter-occupied), age of householder, and household size for occupied housing units. Selected aggregates and medians also are provided. The summary statistics are presented in 71 tables, which are tabulated for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature), including, but not limited to, regions, divisions, states, metropolitan/micropolitan areas, counties, county subdivisions, places, ZIP Code Tabulation Areas (ZCTAs), school districts, census tracts, American Indian and Alaska Native areas, tribal subdivisions, and Hawaiian home lands. There are 10 population tables shown down to the county level and 47 population tables and 14 housing tables shown down to the census tract level. Every table cell is represented by a separate variable in the data. Each table is iterated for up to 330 population groups, which are called "characteristic iterations" in the Census Bureau's nomenclature: the total population, 74 race categories, 114 American Indian and Alaska Native categories, 47 Asian categories, 43 Native Hawaiian and Other Pacific Islander categories, and 51 Hispanic/not Hispanic groups. Moreover, the tables for some large summary areas (e.g., regions, divisions, and states) are iterated for portions of geographic areas ("geographic components" in the Census Bureau's nomenclature) such as metropolitan/micropolitan statistical areas and the principal cities of metropolitan statistical areas. The collection has a separate set of files for every state, the District of Columbia, Puerto Rico, and the National File. Each file set has 11 data files per characteristic iteration, a data file with geographic variables called the "geographic header file," and a documentation file called the "packing list" with information about the files in the file set. Altogether, the 53 file sets have 110,416 data files and 53 packing list files. Each file set is compressed in a separate ZIP archive (Datasets 1-56, 72, and 99). Another ZIP archive (Dataset 100) contains a Microsoft Access database shell and additional documentation files besides the codebook. The National File (Dataset 99) constitutes the National Update for Summary File 2. The National Update added summary levels for the United States as a whole, regions, divisions, and geographic areas that cross state lines such as Core Based Statistical Areas.

Household Demographics in the 2010 CensusThis feature layer contains demographics about households as reported by the U.S. Census Bureau (USCB) in the 2010 U.S. Census. These attributes cover topics such as household types, household size, nonfamily households, householder age, and households with children. A small subset of attributes from the 2000 Census are also included as reference.Per the Census, "Also known as the Population and Housing Census, the Decennial U.S. Census is designed to count every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute hundreds of billions of dollars in federal funds to local communities."Four layers are available: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map detail increases when zooming to local areas. Only one geography is in view at any time.Household Demographics 2010 CensusData currency: 2010Data download: Explore Census DataFor more information: Households and Families: 2010For feedback please contact: ArcGIScomNationalMaps@esri.comData Processing notes:State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies)Field names and aliases are processed by Esri as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.U.S. Census BureauPer USCB, "the Census Bureau is the federal government’s largest statistical agency. We are dedicated to providing current facts and figures about America’s people, places, and economy. Federal law protects the confidentiality of all the information the Census Bureau collects."

This feature layer of Tempe's Census tracts are joined with the Census Bureau's data from the 2018 Planning Database (PDB), which was established to prepare for the upcoming 2020 Census.The 2018 PDB contains select operational, demographic, and socio-economic statistics from the 2010 Census and the 2012-2016 5-year ACS.For more information, see the United States Census Bureau 2018 Planning Database:https://www.census.gov/topics/research/guidance/planning-databases.html

Housing Demographics in the 2010 CensusThis feature layer contains demographics about housing as reported by the U.S. Census Bureau (USCB) in the 2010 U.S. Census. These attributes cover topics such as owner status of housing units (vacant, owner, renter), count of residents per housing unit, and housing unit by householder age. A small subset of attributes from the 2000 Census are also included as reference.Per the Census, "Also known as the Population and Housing Census, the Decennial U.S. Census is designed to count every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute hundreds of billions of dollars in federal funds to local communities."Four layers are available: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas. Only one geography is in view at any time.Housing Demographics 2010 CensusData currency: 2010Data modification: NoneData source: Explore Census DataFor more information: Households and Families: 2010For feedback, please contact: ArcGIScomNationalMaps@esri.comData Processing notes:State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies)Field names and aliases are processed by Esri as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.U.S. Census BureauPer USCB, "the Census Bureau is the federal government’s largest statistical agency. We are dedicated to providing current facts and figures about America’s people, places, and economy. Federal law protects the confidentiality of all the information the Census Bureau collects."

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. After each decennial census, the Census Bureau delineates urban areas that represent densely developed territory, encompassing residential, commercial, and other nonresidential urban land uses. In general, this territory consists of areas of high population density and urban land use resulting in a representation of the "urban footprint." There are two types of urban areas: urbanized areas (UAs) that contain 50,000 or more people and urban clusters (UCs) that contain at least 2,500 people, but fewer than 50,000 people (except in the U.S. Virgin Islands and Guam which each contain urban clusters with populations greater than 50,000). Each urban area is identified by a 5-character numeric census code that may contain leading zeroes.

This data collection contains summary statistics on population and housing subjects derived from questions on the 2010 Census questionnaire. Population counts for the total population and for the population 18 years and over are presented in four tables: (1) population of all ages by race, (2) population 18 years and over by race, (3) Hispanic or Latino population of all ages and not Hispanic or Latino population of all ages by race, and (4) Hispanic or Latino population ages 18 years and over and not Hispanic or Latino population ages 18 years and by race. A fifth table shows the number of occupied and vacant housing units. With one variable per table cell, plus additional variables with geographic information, the collection comprises three data files. The tables are tabulated for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature): the United States as whole, states, regions, divisions, and other geographic areas that cross state boundaries, such as American Indian areas, metropolitan statistical areas, and micropolitan statistical areas. Tabulations for within-state summary levels down to the block level are contained in a companion data collection, Census of Population and Housing, 2010 [United States]: Redistricting Data (Public Law 94-171) Summary File (ICPSR 33441). Two ZIP archives constitute the collection. The first archive contains the data files, while the second contains the codebook and other documentation files, a Microsoft Access database shell, and SAS setups.

The 2010 Census Blocks with Demographic Profile dataset was produced by joining the U.S.Census Bureau's 2010 TIGER/Line File-derived Census Blocks for Fulton County with selected 2010 Summary File 1 data fields. The result is a census block boundary layer attributed with some the more commonly used demographics such as total population, population by race, population by age group, median age, and housing and household characteristics. Because the dataset was derived from the TIGER/Line File Census Blocks, the U.S.Census Bureau's metadata for that dataset is provided below.The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces.

Annual Resident Population Estimates by Age Group, Sex, Race, and Hispanic Origin; for the United States, States, Counties; and for Puerto Rico and its Municipios: April 1, 2010 to July 1, 2019 // Source: U.S. Census Bureau, Population Division // The contents of this file are released on a rolling basis from December through June. // Note: 'In combination' means in combination with one or more other races. The sum of the five race-in-combination groups adds to more than the total population because individuals may report more than one race. Hispanic origin is considered an ethnicity, not a race. Hispanics may be of any race. Responses of 'Some Other Race' from the 2010 Census are modified. This results in differences between the population for specific race categories shown for the 2010 Census population in this file versus those in the original 2010 Census data. The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. // Current data on births, deaths, and migration are used to calculate population change since the 2010 Census. An annual time series of estimates is produced, beginning with the census and extending to the vintage year. The vintage year (e.g., Vintage 2019) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the entire estimates series is revised. Additional information, including historical and intercensal estimates, evaluation estimates, demographic analysis, research papers, and methodology is available on website: https://www.census.gov/programs-surveys/popest.html.

Summary File 1 (SF1) Urban/Rural Update contains summary statistics on population and housing subjects derived from the responses to the 2010 Census questionnaire. Population items include sex, age, race, Hispanic or Latino origin, household relationship, household type, household size, family type, family size, and group quarters. Housing items include occupancy status, vacancy status, and tenure (whether a housing unit is owner-occupied or renter-occupied). The summary statistics are presented in 333 tables, which are tabulated for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature), including, but not limited to, regions, divisions, states, metropolitan/micropolitan statistical areas, counties, county subdivisions, places, congressional districts, American Indian Areas, Alaska Native Areas, Hawaiian Home Lands, ZIP Code tabulation areas, census tracts, block groups, and blocks. There are 177 population tables and 58 housing tables shown down to the block level; 84 population tables and 4 housing tables shown down to the census tract level; and 10 population tables shown down to the county level. Some of the summary areas are iterated for "geographic components" or portions of geographic areas, e.g., the principal city of a metropolitan statistical area (MSA) or the urban and rural portions of a MSA. With one variable per table cell and additional variables with geographic information, the collection comprises 2,597 data files, 49 per state, the District of Columbia, Puerto Rico, and the National File. The Census Bureau released SF1 in three stages: initial release, National Update, and Urban/Rural Update. The National Update added summary levels for the United States, regions, divisions, and geographic areas that cross state lines such as Combined Statistical Areas. This update adds urban and rural population and housing unit counts, summary levels for urban areas and the urban/rural components of census tracts and block groups, geographic components involving urbanized areas and urban clusters, and two new tables (household type by relationship for the population 65 years and over and a new tabulation of the total population by race). The initial release and National Update is available as ICPSR 33461. ICPSR supplies this data collection in 54 ZIP archives. There is a separate archive for each state, the District of Columbia, Puerto Rico, and the National File. The last archive contains a Microsoft Access database shell and additional documentation files besides the codebook.

The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Face refers to the areal (polygon) topological primitives that make up MTDB. A face is bounded by one or more edges; its boundary includes only the edges that separate it from other faces, not any interior edges contained within the area of the face. The Topological Faces Shapefile contains the attributes of each topological primitive face. Each face has a unique topological face identifier (TFID) value. Each face in the shapefile includes the key geographic area codes for almost all geographic areas for which the Census Bureau tabulates data for both the 2010 Census and Census 2000. The geometries of each of these geographic areas can then be built by dissolving the face geometries on the appropriate key geographic area codes in the Topological Faces Shapefile.

The 2010 Census Blocks with Demographic Profile dataset was produced by joining the U.S.Census Bureau's 2010 TIGER/Line File-derived Census Blocks for Fulton County with selected 2010 Summary File 1 data fields. The result is a census block boundary layer attributed with some the more commonly used demographics such as total population, population by race, population by age group, median age, and housing and household characteristics. Because the dataset was derived from the TIGER/Line File Census Blocks, the U.S.Census Bureau's metadata for that dataset is provided below.The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Age and Gender Demographics in the 2010 CensusThis feature layer, utilizing data from the U.S. Census Bureau, displays 2010 demographics about age and gender in the U.S. for state, county, tract, and block group geographies. Per USCB, "Focusing on a population’s age and sex composition is one of the most basic ways to understand population change over time." The attributes cover topics such as population counts by 5-year age ranges, male and female population counts, and median age values. A small subset of attributes from the 2000 Census are also included as reference.The U.S. Census counts every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. Four layers are available: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas. Only one geography is in view at any time.Wisconsin Census Tract: 550791851.00Data currency: 2010Data source: Explore Census DataData modification: NoneFor more information:Population Profiles 2010State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies).For a list of fields and alias names, access the following excel document.For feedback please contact: ArcGIScomNationalMaps@esri.comU.S. Census BureauPer USCB, "the Census Bureau is the federal government’s largest statistical agency. We are dedicated to providing current facts and figures about America’s people, places, and economy. Federal law protects the confidentiality of all the information the Census Bureau collects."

Population by 5-year Age Groups by U.S. Postal ZIP Code from the 2010 Decennial Census

CENSUS_2010_TRACT

This feature layer contains demographics about age and gender as reported by the U.S. Census Bureau (USCB) in the 2010 U.S. Census. These attributes cover topics such as population counts by 5-year age ranges, male and female population counts, and median age values. A small subset of attributes from the 2000 Census are also included as reference.The U.S. Census counts every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. Four layers are available: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas. Only one geography is in view at any time.Data currency: 2010Data Source: American Fact FinderFor more information: 2010 Census Demographic ProfileFor feedback please contact: ArcGIScomNationalMaps@esri.comData Processing notes:State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies). Field names and aliases are processed by Esri as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.Other Federal User Community federally focused content that may interest youDepartment of CommerceOpen Data: USDOC

Source: U.S. Census Bureau, PL 94-171 Redistricting data, 2000 and 2010. Note: Census numbers for the cities of Burien and Kent do not include annexations that took place after March 31, 2010. These annexations would increase Burien to 48,072, Kent to 118,565, and decrease uninc King County to 284,089.

This is shape file was obtained from the US Census Bureau for the Census 2010 Demographic profiles, then clipped for the Territory of Puerto Rico. The shape polygons represented are the Census tract areas, where spatial information about the population are described using Census tract polygons.

The original Census 2010 tract shape file with Selected Demographic and Economics Data was obtained from the US Census Bureau TIGER/Line data: https://www2.census.gov/geo/tiger/TIGER2010DP1/Tract_2010Census_DP1.zip

Please refer to the US Census bureau as the source data providers for this shapefile resource. The original shapefile and other TIGER/Line Selected Demographic and Economics Data shapefiles can be found at the US Census Bureau TIGER/Line web portal: [https://www.census.gov/geo/maps-data/data/tiger-data.html]