This map shows population density of the United States. Areas in darker magenta have much higher population per square mile than areas in orange or yellow. Data is from the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics. The map's layers contain total population counts by sex, age, and race groups for Nation, State, County, Census Tract, and Block Group in the United States and Puerto Rico. From the Census:"Population density allows for broad comparison of settlement intensity across geographic areas. In the U.S., population density is typically expressed as the number of people per square mile of land area. The U.S. value is calculated by dividing the total U.S. population (316 million in 2013) by the total U.S. land area (3.5 million square miles).When comparing population density values for different geographic areas, then, it is helpful to keep in mind that the values are most useful for small areas, such as neighborhoods. For larger areas (especially at the state or country scale), overall population density values are less likely to provide a meaningful measure of the density levels at which people actually live, but can be useful for comparing settlement intensity across geographies of similar scale." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

U.S. Census Bureau QuickFacts statistics for Jacksonville city, Florida. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

Annual Resident Population Estimates by Age Group, Sex, Race, and Hispanic Origin: April 1, 2010 to July 1, 2018 // Source: U.S. Census Bureau, Population Division // The contents of this file are released on a rolling basis from December through June. // Note: 'In combination' means in combination with one or more other races. The sum of the five race-in-combination groups adds to more than the total population because individuals may report more than one race. Hispanic origin is considered an ethnicity, not a race. Hispanics may be of any race. Responses of 'Some Other Race' from the 2010 Census are modified. This results in differences between the population for specific race categories shown for the 2010 Census population in this file versus those in the original 2010 Census data. For more information, see https://www2.census.gov/programs-surveys/popest/technical-documentation/methodology/modified-race-summary-file-method/mrsf2010.pdf. // The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. // For detailed information about the methods used to create the population estimates, see https://www.census.gov/programs-surveys/popest/technical-documentation/methodology.html. // Each year, the Census Bureau's Population Estimates Program (PEP) utilizes current data on births, deaths, and migration to calculate population change since the most recent decennial census, and produces a time series of estimates of population. The annual time series of estimates begins with the most recent decennial census data and extends to the vintage year. The vintage year (e.g., V2017) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the Census Bureau revises estimates for years back to the last census. As each vintage of estimates includes all years since the most recent decennial census, the latest vintage of data available supersedes all previously produced estimates for those dates. The Population Estimates Program provides additional information including historical and intercensal estimates, evaluation estimates, demographic analysis, and research papers on its website: https://www.census.gov/programs-surveys/popest.html.

About this dataset

Context

The dataset tabulates the Rhode Island population by age. The dataset can be utilized to understand the age distribution and demographics of Rhode Island.

Content

The dataset constitues the following three datasets

• Rhode Island Age Group Population Dataset: A complete breakdown of Rhode Island age demographics from 0 to 85 years, distributed across 18 age groups
• Rhode Island Age Cohorts Dataset: Children, Working Adults, and Seniors in Rhode Island - Population and Percentage Analysis
• Rhode Island Population Pyramid Dataset: Age Groups, Male and Female Population, and Total Population for Demographics Analysis

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Abstract

The key objective of every census is to count every person (man, woman, child) resident in the country on census night, and also collect information on assorted demographic (sex, age, marital status, citizenship) and socio-economic (education/qualifications; labour force and economic activity) information, as well as data pertinent to household and housing characteristics. This count provides a complete picture of the population make-up in each village and town, of each island and region, thus allowing for an assessment of demographic change over time.

The need for a national census became obvious to the Census Office (Bureau of Statistics) during 1997 when a memo was submitted to government officials proposing the need for a national census in an attempt to update old socio-economic figures. The then Acting Director of the Bureau of Statistics and his predecessor shared a similar view: that the 'heydays' and 'prosperity' were nearing their end. This may not have been apparent, as it took until almost mid-2001 for the current Acting Government Statistician to receive instructions to prepare planning for a national census targeted for 2002. It has been repeatedly said that for adequate planning at the national level, information about the characteristics of the society is required. With such information, potential impacts can be forecast and policies can be designed for the improvement and benefit of society. Without it, the people, national planners and leaders will inevitably face uncertainties.

Geographic coverage

National coverage as the Population Census covers the whole of Nauru.

Analysis unit

• Household
• Individual (in a private household dwelling, institutions and non-private dwelling).

Universe

The Census covers all individuals living in private and non-private dwellings and institutions.

Kind of data

Census/enumeration data [cen]

Sampling deviation

There is no sampling for the population census, full coverage.

Mode of data collection

Face-to-face [f2f]

Research instrument

The questionnaire was based on the Pacific Islands Model Population and Housing Census Form and the 1992 census, and comprised two parts: a set of household questions, asked only of the head of household, and an individual questionnaire, administered to each household member. Unlike the previous census, which consisted of a separate household form plus two separate individual forms for Nauruans and non-Nauruans, the 2 002 questionnaire consisted of only one form separated into different parts and sections. Instructions (and skips) were desi

The questionnaire cover recorded various identifiers: district name, enumeration area, house number, number of households (family units) residing, total number of residents, gender, and whether siblings of the head of the house were also recorded. The second page, representing a summary page, listed every individual residing within the house. This list was taken by the enumerator on the first visit, on the eve of census night. The first part of the census questionnaire focused on housing-related questions. It was administered only once in each household, with questions usually asked of the household head. The household form asked the same range of questions as those covered in the 1992 census, relating to type of housing, structure of outer walls, water supply sources and storage, toilet and cooking facilities, lighting, construction materials and subsistence-type activities. The second part of the census questionnaire focused on individual questions covering all household members. This section was based on the 1992 questions, with notable differences being the exclusion of income-level questions and the expansion of fertility and mortality questions. As in 1992, a problem emerged during questionnaire design regarding the question of who or what should determine a ‘Nauruan’. Unlike the 1992 census, where the emphasis was on blood ties, the issue of naturalisation and citizenship through the sale of passports seriously complicated matters in 2 002. To resolve this issue, it was decided to apply two filtering processes: Stage 1 identified persons with tribal heritage through manual editing, and Stage 2 identified persons of Nauruan nationality and citizenship through designed skips in the questionnaire that were incorporated in the data-processing programming.

The topics of questions for each of the parts include: - Person Particulars: - name - relationship - sex - ethnicity - religion - educational attainment - Economic Activity (to all persons 15 years and above): - economic activity - economic inactive - employment status - Fertility: - Fertility - Mortality - Labour Force Activity: - production of cash crops - fishing - own account businesses - handicrafts. - Disability: - type of disability - nature of disability - Household and housing: - electricity - water - tenure - lighting - cooking - sanitation - wealth ownerships

Cleaning operations

Coding, data entry and editing Coding took longer than expected when the Census Office found that more quality-control checks were required before coding could take place and that a large number of forms still required attention. While these quality-control checks were supposed to have been done by the supervisors in the field, the Census Office decided to review all census forms before commencing the coding. This process took approximately three months, before actual data processing could begin. The amount of additional time required to recheck the quality of every census form meant that data processing fell behind schedule. The Census Office had to improvise, with a little pressure from external stakeholders, and coding, in conjunction with data entry, began after recruiting two additional data entry personnel. All four Census Office staff became actively involved with coding, with one staff member alternating between coding and data entry, depending on which process was dropping behind schedule. In the end, the whole process took almost two months to complete. Prior to commencing data entry, the Census Office had to familiarise itself with the data entry processing system. For this purpose, SPC’s Demography/Population Programme was invited to lend assistance. Two office staff were appointed to work with Mr Arthur Jorari, SPC Population Specialist, who began by revising their skills for the data processing software that had been introduced by Dr McMurray. This training attachment took two weeks to complete. Data entry was undertaken using the 2 .3 version of the US Census Bureau’s census and surveying processing software, or CSPro2.3. This version was later updated to CSPro2.4, and all data were transferred accordingly. Technical assistance for data editing was provided by Mr Jorari over a two-week period. While most edits were completed during this period, it was discovered that some batches of questionnaires had not been entered during the initial data capturing. Therefore, batch-edit application had to be regenerated. This process was frequently interrupted by power outages prevailing at the time, which delayed data processing considerably and also required much longer periods of technical support to the two Nauru data processing staff via phone or email (when available).

Data appraisal

Data was compared with Administrative records after the Census to review the quality and reliability of the data.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov. The Low- to Moderate-Income (LMI) New York State (NYS) Census Population Analysis dataset is resultant from the LMI market database designed by APPRISE as part of the NYSERDA LMI Market Characterization Study (https://www.nyserda.ny.gov/lmi-tool). All data are derived from the U.S. Census Bureau’s American Community Survey (ACS) 1-year Public Use Microdata Sample (PUMS) files for 2013, 2014, and 2015. Each row in the LMI dataset is an individual record for a household that responded to the survey and each column is a variable of interest for analyzing the low- to moderate-income population. The LMI dataset includes: county/county group, households with elderly, households with children, economic development region, income groups, percent of poverty level, low- to moderate-income groups, household type, non-elderly disabled indicator, race/ethnicity, linguistic isolation, housing unit type, owner-renter status, main heating fuel type, home energy payment method, housing vintage, LMI study region, LMI population segment, mortgage indicator, time in home, head of household education level, head of household age, and household weight. The LMI NYS Census Population Analysis dataset is intended for users who want to explore the underlying data that supports the LMI Analysis Tool. The majority of those interested in LMI statistics and generating custom charts should use the interactive LMI Analysis Tool at https://www.nyserda.ny.gov/lmi-tool. This underlying LMI dataset is intended for users with experience working with survey data files and producing weighted survey estimates using statistical software packages (such as SAS, SPSS, or Stata).

Historical population counts from the US Census Bureau census counts of 1970, 1980, 1990, 2000, 2010, and 2020. Certified population estimates prepared by the State Demographer beginning 1981. Population density for selected years. The certified population estimates are as estimated for the given vintage year and may be different from the revised estimates and the intercensal (smoothed) estimates also produced by the State Demographer. Census counts for April 1 of given year, population estimates for July 1 of given year.

Results of Kenya's 6th National Census i.e The 2019 Kenya Population and Housing Census Volume I, II, III, and IV reports.

VITAL SIGNS INDICATOR Population (LU1)

FULL MEASURE NAME
Population estimates

LAST UPDATED
February 2023

DESCRIPTION
Population is a measurement of the number of residents that live in a given geographical area, be it a neighborhood, city, county or region.

DATA SOURCE
California Department of Finance: Population and Housing Estimates - http://www.dof.ca.gov/Forecasting/Demographics/Estimates/
Table E-6: County Population Estimates (1960-1970)
Table E-4: Population Estimates for Counties and State (1970-2021)
Table E-8: Historical Population and Housing Estimates (1990-2010)
Table E-5: Population and Housing Estimates (2010-2021)

Bay Area Jurisdiction Centroids (2020) - https://data.bayareametro.gov/Boundaries/Bay-Area-Jurisdiction-Centroids-2020-/56ar-t6bs
Computed using 2020 US Census TIGER boundaries

U.S. Census Bureau: Decennial Census Population Estimates - http://www.s4.brown.edu/us2010/index.htm- via Longitudinal Tract Database Spatial Structures in the Social Sciences, Brown University
1970-2020

U.S. Census Bureau: American Community Survey (5-year rolling average; tract) - https://data.census.gov/
2011-2021
Form B01003

Priority Development Areas (Plan Bay Area 2050) - https://opendata.mtc.ca.gov/datasets/MTC::priority-development-areas-plan-bay-area-2050/about

CONTACT INFORMATION
vitalsigns.info@bayareametro.gov

METHODOLOGY NOTES (across all datasets for this indicator)
All historical data reported for Census geographies (metropolitan areas, county, city and tract) use current legal boundaries and names. A Priority Development Area (PDA) is a locally-designated area with frequent transit service, where a jurisdiction has decided to concentrate most of its housing and jobs growth for development in the foreseeable future. PDA boundaries are current as of December 2022.

Population estimates for Bay Area counties and cities are from the California Department of Finance, which are as of January 1st of each year. Population estimates for non-Bay Area regions are from the U.S. Census Bureau. Decennial Census years reflect population as of April 1st of each year whereas population estimates for intercensal estimates are as of July 1st of each year. Population estimates for Bay Area tracts are from the decennial Census (1970-2020) and the American Community Survey (2011-2021 5-year rolling average). Estimates of population density for tracts use gross acres as the denominator.

Population estimates for Bay Area tracts and PDAs are from the decennial Census (1970-2020) and the American Community Survey (2011-2021 5-year rolling average). Population estimates for PDAs are allocated from tract-level Census population counts using an area ratio. For example, if a quarter of a Census tract lies with in a PDA, a quarter of its population will be allocated to that PDA. Estimates of population density for PDAs use gross acres as the denominator. Note that the population densities between PDAs reported in previous iterations of Vital Signs are mostly not comparable due to minor differences and an updated set of PDAs (previous iterations reported Plan Bay Area 2040 PDAs, whereas current iterations report Plan Bay Area 2050 PDAs).

The following is a list of cities and towns by geographical area:

Big Three: San Jose, San Francisco, Oakland

Bayside: Alameda, Albany, Atherton, Belmont, Belvedere, Berkeley, Brisbane, Burlingame, Campbell, Colma, Corte Madera, Cupertino, Daly City, East Palo Alto, El Cerrito, Emeryville, Fairfax, Foster City, Fremont, Hayward, Hercules, Hillsborough, Larkspur, Los Altos, Los Altos Hills, Los Gatos, Menlo Park, Mill Valley, Millbrae, Milpitas, Monte Sereno, Mountain View, Newark, Pacifica, Palo Alto, Piedmont, Pinole, Portola Valley, Redwood City, Richmond, Ross, San Anselmo, San Bruno, San Carlos, San Leandro, San Mateo, San Pablo, San Rafael, Santa Clara, Saratoga, Sausalito, South San Francisco, Sunnyvale, Tiburon, Union City, Vallejo, Woodside

Inland, Delta and Coastal: American Canyon, Antioch, Benicia, Brentwood, Calistoga, Clayton, Cloverdale, Concord, Cotati, Danville, Dixon, Dublin, Fairfield, Gilroy, Half Moon Bay, Healdsburg, Lafayette, Livermore, Martinez, Moraga, Morgan Hill, Napa, Novato, Oakley, Orinda, Petaluma, Pittsburg, Pleasant Hill, Pleasanton, Rio Vista, Rohnert Park, San Ramon, Santa Rosa, Sebastopol, Sonoma, St. Helena, Suisun City, Vacaville, Walnut Creek, Windsor, Yountville

Unincorporated: all unincorporated towns

Population by U.S. Postal ZIP Code from the 2020 Decennial Census

Dataset contains census usually resident population counts from the 2013, 2018, and 2023 Censuses, as well as the percentage change in the population count between the 2013 and 2018 Censuses, and between the 2018 and 2023 Censuses. Data is available by statistical area 2.

Map shows the percentage change in the census usually resident population count between the 2018 and 2023 Censuses.

Download lookup file from Stats NZ ArcGIS Online or embedded attachment in Stats NZ geographic data service. Download data table (excluding the geometry column for CSV files) using the instructions in the Koordinates help guide.

​

Footnotes

Geographical boundaries

Statistical standard for geographic areas 2023 (updated December 2023) has information about geographic boundaries as of 1 January 2023. Address data from 2013 and 2018 Censuses was updated to be consistent with the 2023 areas. Due to the changes in area boundaries and coding methodologies, 2013 and 2018 counts published in 2023 may be slightly different to those published in 2013 or 2018.

​

Subnational census usually resident population

The census usually resident population count of an area (subnational count) is a count of all people who usually live in that area and were present in New Zealand on census night. It excludes visitors from overseas, visitors from elsewhere in New Zealand, and residents temporarily overseas on census night. For example, a person who usually lives in Christchurch city and is visiting Wellington city on census night will be included in the census usually resident population count of Christchurch city.

​

Caution using time series

Time series data should be interpreted with care due to changes in census methodology and differences in response rates between censuses. The 2023 and 2018 Censuses used a combined census methodology (using census responses and administrative data), while the 2013 Census used a full-field enumeration methodology (with no use of administrative data).

​

About the 2023 Census dataset

For information on the 2023 dataset see Using a combined census model for the 2023 Census. We combined data from the census forms with administrative data to create the 2023 Census dataset, which meets Stats NZ's quality criteria for population structure information. We added real data about real people to the dataset where we were confident the people who hadn’t completed a census form (which is known as admin enumeration) will be counted. We also used data from the 2018 and 2013 Censuses, administrative data sources, and statistical imputation methods to fill in some missing characteristics of people and dwellings.

​

Data quality

The quality of data in the 2023 Census is assessed using the quality rating scale and the quality assurance framework to determine whether data is fit for purpose and suitable for release. Data quality assurance in the 2023 Census has more information.

​

Quality rating of a variable

The quality rating of a variable provides an overall evaluation of data quality for that variable, usually at the highest levels of classification. The quality ratings shown are for the 2023 Census unless stated. There is variability in the quality of data at smaller geographies. Data quality may also vary between censuses, for subpopulations, or when cross tabulated with other variables or at lower levels of the classification. Data quality ratings for 2023 Census variables has more information on quality ratings by variable.

​

Census usually resident population count concept quality rating

The census usually resident population count is rated as very high quality.

Census usually resident population count – 2023 Census: Information by concept has more information, for example, definitions and data quality.

​

Using data for good

Stats NZ expects that, when working with census data, it is done so with a positive purpose, as outlined in the Māori Data Governance Model (Data Iwi Leaders Group, 2023). This model states that "data should support transformative outcomes and should uplift and strengthen our relationships with each other and with our environments. The avoidance of harm is the minimum expectation for data use. Māori data should also contribute to iwi and hapū tino rangatiratanga”.

​

Confidentiality

The 2023 Census confidentiality rules have been applied to 2013, 2018, and 2023 data. These rules protect the confidentiality of individuals, families, households, dwellings, and undertakings in 2023 Census data. Counts are calculated using fixed random rounding to base 3 (FRR3) and suppression of ‘sensitive’ counts less than six, where tables report multiple geographic variables and/or small populations. Individual figures may not always sum to stated totals. Applying confidentiality rules to 2023 Census data and summary of changes since 2018 and 2013 Censuses has more information about 2023 Census confidentiality rules.

​

Symbol

-998 Not applicable

About this dataset

Context

The dataset tabulates the Texas County population by age. The dataset can be utilized to understand the age distribution and demographics of Texas County.

Content

The dataset constitues the following three datasets

• Texas County, OK Age Group Population Dataset: A complete breakdown of Texas County age demographics from 0 to 85 years, distributed across 18 age groups
• Texas County, OK Age Cohorts Dataset: Children, Working Adults, and Seniors in Texas County - Population and Percentage Analysis
• Texas County, OK Population Pyramid Dataset: Age Groups, Male and Female Population, and Total Population for Demographics Analysis

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

A global database of Census Data that provides an understanding of population distribution at administrative and zip code levels over 55 years, past, present, and future.

Leverage up-to-date census data with population trends for real estate, market research, audience targeting, and sales territory mapping.

Self-hosted commercial demographic dataset curated based on trusted sources such as the United Nations or the European Commission, with a 99% match accuracy. The global Census Data is standardized, unified, and ready to use.

Use cases for the Global Census Database (Consumer Demographic Data)

• Ad targeting

• B2B Market Intelligence

• Customer analytics

• Real Estate Data Estimations

• Marketing campaign analysis

• Demand forecasting

• Sales territory mapping

• Retail site selection

• Reporting

• Audience targeting

Census data export methodology

Our consumer demographic data packages are offered in CSV format. All Demographic data are optimized for seamless integration with popular systems like Esri ArcGIS, Snowflake, QGIS, and more.

Product Features

• Historical population data (55 years)

• Changes in population density

• Urbanization Patterns

• Accurate at zip code and administrative level

• Optimized for easy integration

• Easy customization

• Global coverage

• Updated yearly

• Standardized and reliable

• Self-hosted delivery

• Fully aggregated (ready to use)

• Rich attributes

Why do companies choose our demographic databases

• Standardized and unified demographic data structure

• Seamless integration in your system

• Dedicated location data expert

Note: Custom population data packages are available. Please submit a request via the above contact button for more details.

New York City Population By Community Districts

The data was collected from Census Bureaus' Decennial data dissemination (SF1) for the years 1970, 1980, 1990, 2000 and 2010.

Compiled by the Population Division – New York City Department of City Planning

This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Socio-Economic Indexes for Areas (SEIFA) is a product developed by the ABS that ranks areas in Australia according to relative socio-economic advantage and disadvantage. The indexes are based on information from the five-yearly Census. SEIFA 2011 is the latest version of this product and consists of four indexes: The Index of Relative Socio-economic Disadvantage (IRSD); The Index of Relative Socio-economic Advantage and Disadvantage (IRSAD); The Index of Education and Occupation (IEO); The Index of Economic Resources (IER). Each index is a summary of a different subset of Census variables and focuses on a different aspect of socio-economic advantage and disadvantage.

CN: Population Census: Population: Urban data was reported at 901.990 Person mn in 12-01-2020. This records an increase from the previous number of 665.570 Person mn for 12-01-2010. CN: Population Census: Population: Urban data is updated decadal, averaging 299.710 Person mn from Dec 1953 (Median) to 12-01-2020, with 7 observations. The data reached an all-time high of 901.990 Person mn in 12-01-2020 and a record low of 77.260 Person mn in 12-01-1953. CN: Population Census: Population: Urban data remains active status in CEIC and is reported by National Bureau of Statistics. The data is categorized under China Premium Database’s Socio-Demographic – Table CN.GA: Population: National Population Census.

About this dataset

Context

The dataset tabulates the Broadalbin town population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Broadalbin town. The dataset can be utilized to understand the population distribution of Broadalbin town by age. For example, using this dataset, we can identify the largest age group in Broadalbin town.

Key observations

The largest age group in Broadalbin Town, New York was for the group of age 60-64 years with a population of 455 (8.79%), according to the 2021 American Community Survey. At the same time, the smallest age group in Broadalbin Town, New York was the 85+ years with a population of 105 (2.03%). Source: U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Broadalbin town is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Broadalbin town total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Broadalbin town Population by Age. You can refer the same here

2020 Census data for the city of Boston, Boston neighborhoods, census tracts, block groups, and voting districts. In the 2020 Census, the U.S. Census Bureau divided Boston into 207 census tracts (~4,000 residents) made up of 581 smaller block groups. The Boston Planning and Development Agency uses the 2020 tracts to approximate Boston neighborhoods. The 2020 Census Redistricting data also identify Boston’s voting districts.

For analysis of Boston’s 2020 Census data including graphs and maps by the BPDA Research Division and Office of Digital Cartography and GIS, see 2020 Census Research Publications

For a complete official data dictionary, please go to 2020 Census State Redistricting Data (Public Law 94-171) Summary File, Chapter 6. Data Dictionary. 2020 Census State Redistricting Data (Public Law 94-171) Summary File

2020 Census Tracts In Boston

2020 Census Block Groups In Boston

Boston Neighborhood Boundaries Approximated By 2020 Census Tracts

Boston Voting District Boundaries

This dataset shows census data for Nigeria from government data sources and the World Bank data portal.