The U.S. Census counts every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The basic purpose of the census is apportionment and redistricting. "Apportionment" is the process of dividing the 435 memberships, or seats, in the House of Representatives among the 50 states based on the population figures collected during the decennial census. "Redistricting" is the process of geographically defining state legislative districts. The census data allow state officials to realign congressional and state legislative districts in their states, taking into account population shifts since the last census and assuring equal representation for their constituents in compliance with the “one-person, one-vote” principle of the 1965 Voting Rights Act.

Starting in mid-July of 2020, despite many delays due to Covid-19, census takers began interviewing households who had not yet responded online or via the mail to the U.S. 2020 Census. The federal census, required by the United States’ Constitution, happens once every 10 years and each time, there are new variations in enumeration (counting) techniques and what statistical data to collect. There are processes around “how” to count and then also “what” to count; the data collected needs to be useful for governance and allocation yet also respectful of privacy and remain fair and impartial for the entire U.S. population. In 2019 and 2020, hundreds of thousands of temporary workers from local communities were hired to go out into the field as census takers as well as staff offices and provide supervision. This 22nd federal census count began in January 2020 with remote portions of Alaska, where the territory was still frozen and traversable. These employed citizens are just one aspect of how the census is truly a community event. Let’s dive into the history of the U.S. Census and also learn why this count is so important.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics will be released in the summer of 2011. The data in these particular RGIS Clearinghouse tables are for all Census Tracts in New Mexico. There are two data tables. One provides total counts by major race groups and by Hispanic ethnicity, while the other provides proportions of the total population for these same groups. These files, along with file-specific descriptions (in Word and text formats) are available in a single zip file.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. Results for sub-state geographic areas in New Mexico were released in a series of data products. These data come from Summary File 1 (SF-1). The geographic coverage for SF-1 includes the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, census tracts, block groups and blocks, among others. The data in these particular RGIS Clearinghouse tables are for New Mexico and all census tracts. There are two data tables in this file. Table DC10_00213 shows counts of population by eighteen 5-year age groups for both sexes combined. Table DC10_00214 shows percent distribution of population by eighteen 5-year age groups for both sexes combined. These files, along with file-specific descriptions (in Word and text formats) are available in a single zip file.

The downloadable ZIP file contains Esri shapefiles and PDF maps. Contains the information used to determine the location of the new legislative and congressional district boundaries for the state of Idaho as adopted by Idaho's first Commission on Redistricting on March 9, 2002. Contains viewable and printable legislative and congressional district maps, viewable and printable reports, and importable geographic data files.These data were contributed to INSIDE Idaho at the University of Idaho Library in 2001. CD/DVD -ROM availability: https://alliance-primo.hosted.exlibrisgroup.com/permalink/f/m1uotc/CP71156191150001451These files were created by a six-person, by-partisan commission, consisting of six commission members, three democrats and three republicans. This commission was given 90 days to redraw congressional and legislative district boundaries for the state of Idaho. Due to lawsuits, the process was extended. This legislative plan was approved by the commission on March 9th, 2002 and was previously called L97. All digital data originates from TIGER/Line files and 2000 U.S. Census data.Frequently asked questions:How often are Idaho's legislative and congressional districts redrawn? Once every ten years after each census, as required by law, or when directed by the Idaho Supreme Court. The most recent redistricting followed the 2000 census. Redistricting is not expected to occur again in Idaho until after the 2010 census. Who redrew Idaho's legislative and congressional districts? In 2001, for the first time, Idaho used a citizens' commission to redraw its legislative and congressional district boundaries. Before Idaho voters amended the state Constitution in 1994 to create a Redistricting Commission, redistricting was done by a committee of the Idaho Legislature. The committee's new district plans then had to pass the Legislature before becoming law. Who was on the Redistricting Commission? Idaho's first Commission on Redistricting was composed of Co-Chairmen Kristi Sellers of Chubbuck and Tom Stuart of Boise and Stanley. The other four members were Raymond Givens of Coeur d'Alene, Dean Haagenson of Hayden Lake, Karl Shurtliff of Boise, John Hepworth of Buhl (who resigned effective December 4, 2001), and Derlin Taylor of Burley (who was appointed to replace Mr. Hepworth). What are the requirements for being a Redistricting Commissioner? According to Idaho Law, no person may serve on the commission who: 1. Is not a registered voter of the state at the time of selection; or 2. Is or has been within one (1) year a registered lobbyist; or 3. Is or has been within two (2) years prior to selection an elected official or elected legislative district, county or state party officer. (This requirement does not apply to precinct committeepersons.) The individual appointing authorities may consider additional criteria beyond these statutory requirements. Idaho law also prohibits a person who has served on the Redistricting Commission from serving in either house of the legislature for five years following their service on the commission. When did Idaho's first Commission on Redistricting meet? Idaho law allows the Commission only 90 days to conduct its business. The Redistricting Commission was formed on June 5, 2001. Its 90-day time period would expire on September 3, 2001. After holding hearings around the state in June and July, a majority of the Commission voted to adopt new legislative and congressional districts on August 22, 2001. On November 29th, the Idaho Supreme Court ruled the Commission's legislative redistricting plan unconstitutional and directed them to reconvene and adopt an alternative plan. The Commission did so, adopting a new plan on January 8, 2000. The Idaho Supreme Court found the Commission's second legislative map unconstitutional on March 1, 2002 and ordered the Commission to try again. The Commission adopted a third plan on March 9, 2002. The Supreme Court denied numerous challenges to this third map. It then became the basis for the 2002 primary and General elections and is expected to be used until the 2012 elections. What is the basic timetable for Idaho to redraw its legislative and congressional districts?Typically, and according to Idaho law, the Redistricting Commission cannot be formally convened until after Idaho has received the official census counts and not before June 1 of a year ending in one. Idaho's first Commission on redistricting was officially created on June 5, 2001. By law, a Commission then has 90 days (or until September 3, 2001 in the case of Idaho's first Commission) to approve new legislative and congressional district boundaries based on the most recent census figures. If at least four of the six commissioners fail to approve new legislative and congressional district plans before that 90-day time period expires, the Commission will cease to exist. The law is silent as to what happens next. Could you summarize the important dates for Idaho's first Commission on Redistricting one more time please? After January 1, 2001 but before April 1, 2001: As required by federal law, the Census Bureau must deliver to the states the small area population counts upon which redistricting is based. The Census Bureau determines the exact date within this window when Idaho will get its population figures. Idaho's were delivered on March 23, 2001. Why conduct a census anyway? The original and still primary reason for conducting a national census every ten years is to determine how the 435 seats in the United States House of Representatives are to be apportioned among the 50 states. Each state receives its share of the 435 seats in the U.S. House based on the proportion of its population to that of the total U.S. population. For example, the population shifts during the 1990's resulted in the Northeastern states losing population and therefore seats in Congress to the Southern and the Western states. What is reapportionment? Reapportionment is a federal issue that applies only to Congress. It is the process of dividing up the 435 seats in the U.S. House of Representatives among the 50 states based on each state's proportion of the total U.S. population as determined by the most recent census. Apportionment determines the each state's power, as expressed by the size of their congressional delegation, in Congress and, through the electoral college, directly affects the selection of the president (each state's number of votes in the electoral college equals the number of its representatives and senators in Congress). Like all states, Idaho has two U.S. senators. Based on our 1990 population of 1,006,000 people and our 2000 population of 1,293,953, and relative to the populations of the other 49 states, Idaho will have two seats in the U.S. House of Representatives. Even with the state's 28.5% population increase from 1990 to 2000, Idaho will not be getting a third seat in the U.S. House of Representatives. Assuming Idaho keeps growing at the same rate it did through the decade of the 1990's, it will likely be 30 or 40 years (after 3 or 4 more censuses) before Idaho gets a third congressional seat. What is redistricting? Redistricting is the process of redrawing the boundaries of legislative and congressional districts within each state to achieve population equality among all congressional districts and among all legislative districts. The U.S. Constitution requires this be done for all congressional districts after each decennial census. The Idaho Constitution also requires that this be done for all legislative districts after each census. The democratic principle behind redistricting is "one person, one vote." Requiring that districts be of equal population ensures that every elected state legislator or U.S. congressman represents very close to the same number of people in that state, therefore, each citizen's vote will carry the same weight. How are reapportionment and redistricting related to the census? The original and still primary reason for conducting a census every ten years is to apportion the (now) 435 seats in the U.S. House of Representatives among the several states. The census records population changes and is the legally recognized basis for redrawing electoral districts of equal population. Why is redistricting so important? In a democracy, it is important for all citizens to have equal representation. The political parties also see redistricting as an opportunity to draw districts that favor electing their members and, conversely, that are unfavorable for electing their political opposition. (It's for this reason that redistricting has been described as "the purest form of political bloodsport.") What is PL 94-171? Public Law (PL) 94-171 (Title 13, United States Code) was enacted by Congress in 1975. It was intended to provide state legislatures with small-area census population totals for use in redistricting. The law's origins lie with the "one person, one vote" court decisions in the 1960's. State legislatures needed to reconcile Census Bureau's small geographic area boundaries with voting tabulation districts (precincts) boundaries to create legislative districts with balanced populations. The Census Bureau worked with state legislatures and others to meet this need beginning with the 1980 census. The resulting Public Law 94-171 allows states to work voluntarily with the Census Bureau to match voting district boundaries with small-area census boundaries. With this done, the Bureau can report to those participating states the census population totals broken down by major race group and Hispanic origin for the total population and for persons aged 18 years and older for each census subdivision. Idaho participated in the Bureau's Census 2000 Redistricting Data Program and, where counties used visible features to delineate precinct boundaries, matched those boundaries with census reporting areas. In those instances where counties did not use visible features to

This data show the number of temporary US Census Bureau employees hired in each state to assist with the 2020 Census.Every ten year, the U.S. Constitution requires that the country’s population be counted. For 2020, the undertaking includes hiring as many as 500,000 temporary workers to conduct door-to-door field operations.The number of workers hired during peak Census Bureau operations is so large that it affects statistics about the nation's employment. Census employment data is important because it allows economists to remove the hires from economic indicator releases to better judge payroll trends and broader economic performance.Current Employment Statistics (CES) for the nation, states and metro areas are published each month by the U.S. Bureau of Labor Statistics (BLS). The statistics are based on a survey of businesses and government agencies.As a supplement to this release BLS will publish 2020 Census and CES Employment by State, providing month-to-month state-level tallies of Census hiring.

The Census Bureau (https://www.census.gov/) maintains geographic boundaries for the analysis and mapping of demographic information across the United States. Every 10 years the Census Bureau counts the population of the United States as mandated by Constitution. The Census Bureau releases the results of this county as demographic data with geographic identifiers so that maps and analysis can be performed on the US population. There are little more Census Tracts within Los Angeles County in 2020 Census TIGER/Line Shapefiles, compared to 2010.Created/Updated: Updated on September 2023, to merged Long Beach Breakwater land-based tracts silver polygons into bigger tract 990300 as per 2022 TIGER Line Shapefiles, and to update Santa Catalina Islands and San Clemente Islands tract boundary based on DPW City boundaries (except 599000 tract in Avalon). Updated on Sep 2022 and Dec 2022, to align tract boundary along city boundaries. Created on March 2021. How was this data created? This geographic file was downloaded from Census Bureau website: https://www2.census.gov/geo/tiger/TIGER2020PL/STATE/06_CALIFORNIA/06037/on February, 2021 and customized for LA County. Data Fields:1. CT20 (TRACTCE20): 6-digit census tract number, 2. Label (NAME20): Decimal point census tract number.

Household Demographics in the 2010 CensusThis feature layer contains demographics about households as reported by the U.S. Census Bureau (USCB) in the 2010 U.S. Census. These attributes cover topics such as household types, household size, nonfamily households, householder age, and households with children. A small subset of attributes from the 2000 Census are also included as reference.Per the Census, "Also known as the Population and Housing Census, the Decennial U.S. Census is designed to count every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute hundreds of billions of dollars in federal funds to local communities."Four layers are available: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map detail increases when zooming to local areas. Only one geography is in view at any time.Household Demographics 2010 CensusData currency: 2010Data download: Explore Census DataFor more information: Households and Families: 2010For feedback please contact: ArcGIScomNationalMaps@esri.comData Processing notes:State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies)Field names and aliases are processed by Esri as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.U.S. Census BureauPer USCB, "the Census Bureau is the federal government’s largest statistical agency. We are dedicated to providing current facts and figures about America’s people, places, and economy. Federal law protects the confidentiality of all the information the Census Bureau collects."

Population by age groups, race and gender, and the poverty by race is attached to the split tract geography to create this split tract with population and poverty data. Split tract data is the product of 2020 census tracts split by 2023 incorporated city boundaries and unincorporated community/countywide statistical areas (CSA) boundaries as of July 1, 2023. The census tract boundaries have been altered and aligned where necessary with legal city boundaries and unincorporated areas, including shoreline/coastal areas. Census Tract:Every 10 years the Census Bureau counts the population of the United States as mandated by Constitution. The Census Bureau (https://www.census.gov/)released 2020 geographic boundaries data including census tracts for the analysis and mapping of demographic information across the United States. City Boundary:City Boundary data is the base map information for the County of Los Angeles. These City Boundaries are based on the Los Angeles County Seamless Cadastral Landbase. The Landbase is jointly maintained by the Los Angeles County Assessor and the Los Angeles County Department of Public Works (DPW). This layer represents current city boundaries within Los Angeles County. The DPW provides the most current shapefiles representing city boundaries and city annexations. True, legal boundaries are only determined on the ground by surveyors licensed in the State of California.Countywide Statistical Areas (CSA): The countywide Statistical Area (CSA) was defined to provide a common geographic boundary for reporting departmental statistics for unincorporated areas and incorporated Los Angeles city to the Board of Supervisors. The CSA boundary and CSA names are established by the CIO and the LA County Enterprise GIS group worked with the Los Angeles County Board of Supervisors Unincorporated Area and Field Deputies that reflect as best as possible the general name preferences of residents and historical names of areas. This data is primarily focused on broad statistics and reporting, not mapping of communities. This data is not designed to perfectly represent communities, nor jurisdictional boundaries such as Angeles National Forest. CSA represent board approved geographies comprised of Census block groups split by cities.Data Fields:CT20: 2020 Census tractFIP22: 2023 City FIP CodeCITY: City name for incorporated cities and “Unincorporated” for unincorporated areas (as of July 1, 2023) CSA: Countywide Statistical Area (CSA) - Unincorporated area community names and LA City neighborhood names.CT20FIP23CSA: 2020 census tract with 2023 city FIPs for incorporated cities and unincorporated areas and LA neighborhoods. SPA22: 2022 Service Planning Area (SPA) number.SPA_NAME: Service Planning Area name.HD22: 2022 Health District (HD) number: HD_NAME: Health District name.POP23_AGE_0_4: 2023 population 0 to 4 years oldPOP23_AGE_5_9: 2023 population 5 to 9 years old POP23_AGE_10_14: 2023 population 10 to 14 years old POP23_AGE_15_17: 2022 population 15 to 17 years old POP23_AGE_18_19: 2023 population 18 to 19 years old POP23_AGE_20_44: 2023 population 20 to 24 years old POP23_AGE_25_29: 2023 population 25 to 29 years old POP23_AGE_30_34: 2023 population 30 to 34 years old POP23_AGE_35_44: 2023 population 35 to 44 years old POP23_AGE_45_54: 2023 population 45 to 54 years old POP23_AGE_55_64: 2023 population 55 to 64 years old POP23_AGE_65_74: 2023 population 65 to 74 years old POP23_AGE_75_84: 2023 population 75 to 84 years old POP23_AGE_85_100: 2023 population 85 years and older POP23_WHITE: 2023 Non-Hispanic White POP23_BLACK: 2023 Non-Hispanic African AmericanPOP23_AIAN: 2023 Non-Hispanic American Indian or Alaska NativePOP23_ASIAN: 2023 Non-Hispanic Asian POP23_HNPI: 2023 Non-Hispanic Hawaiian Native or Pacific IslanderPOP23_HISPANIC: 2023 HispanicPOP23_MALE: 2023 Male POP23_FEMALE: 2023 Female POV23_WHITE: 2023 Non-Hispanic White below 100% Federal Poverty Level POV23_BLACK: 2023 Non-Hispanic African American below 100% Federal Poverty Level POV23_AIAN: 2023 Non-Hispanic American Indian or Alaska Native below 100% Federal Poverty Level POV23_ASIAN: 2023 Non-Hispanic Asian below 100% Federal Poverty Level POV23_HNPI: 2023 Non-Hispanic Hawaiian Native or Pacific Islander below 100% Federal Poverty Level POV23_HISPANIC: 2023 Hispanic below 100% Federal Poverty Level POV23_TOTAL: 2023 Total population below 100% Federal Poverty Level POP23_TOTAL: 2023 Total PopulationAREA_SQMil: Area in square mile.POP23_DENSITY: 2023 Population per square mile.POV23_PERCENT: 2023 Poverty rate/percentage.How this data created?Population by age groups, ethnic groups and gender, and the poverty by ethnic groups is attributed to the split tract geography to create this data. Split tract polygon data is created by intersecting 2020 census tract polygons, LA Country City Boundary polygons and Countywide Statistical Areas (CSA) polygon data. The resulting polygon boundary aligned and matched with the legal city boundary whenever possible. Notes:1. Population and poverty data estimated as of July 1, 2023. 2. 2010 Census tract and 2020 census tracts are not the same. Similarly, city and community boundaries are as of July 1, 2023.

Results of European Constitution Referendum per census

Tabular data of population by age groups, race and gender, and the poverty by race is attached to the split tract geography to create this split tract with population and poverty data. Split tract data is the product of 2020 census tracts split by 2022 incorporated city boundaries and unincorporated community/countywide statistical areas (CSA) boundaries. The census tract boundaries have been altered and aligned where necessary with legal city boundaries and unincorporated areas, including shoreline/coastal areas. Census Tract:Every 10 years the Census Bureau counts the population of the United States as mandated by Constitution. The Census Bureau (https://www.census.gov/) released 2020 geographic boundaries data including census tracts for the analysis and mapping of demographic information across the United States. City Boundary:City Boundary data is the base map information for the County of Los Angeles. These City Boundaries are based on the Los Angeles County Seamless Cadastral Landbase. The Landbase is jointly maintained by the Los Angeles County Assessor and the Los Angeles County Department of Public Works (DPW). This layer represents current city boundaries within Los Angeles County. The DPW provides the most current shapefiles representing city boundaries and city annexations. True, legal boundaries are only determined on the ground by surveyors licensed in the State of California.Countywide Statistical Areas (CSA): The countywide Statistical Area (CSA) was defined to provide a common geographic boundary for reporting departmental statistics for unincorporated areas and incorporated Los Angeles city to the Board of Supervisors. The CSA boundary and CSA names are established by the CIO and the LA County Enterprise GIS group worked with the Los Angeles County Board of Supervisors Unincorporated Area and Field Deputies that reflect as best as possible the general name preferences of residents and historical names of areas. This data is primarily focused on broad statistics and reporting, not mapping of communities. This data is not designed to perfectly represent communities, nor jurisdictional boundaries such as Angeles National Forest. CSA represent board approved geographies comprised of Census block groups split by cities.Data Field:CT20: 2020 Census tractFIP22: 2022 City FIP CodeCITY: City name for incorporated cities and “Unincorporated” for unincorporated areas (as of July 1, 2022) CSA: Countywide Statistical Area (CSA) - Unincorporated area community names and LA City neighborhood names.CT20FIP22CSA: 2020 census tract with 2022 city FIPs for incorporated cities and unincorporated areas and LA neighborhoods. SPA22: 2022 Service Planning Area (SPA) number.SPA_NAME: Service Planning Area name.HD22: 2022 Health District (HD) number: HD_NAME: Health District name.POP22_AGE_0_4: 2022 population 0 to 4 years oldPOP22_AGE_5_9: 2022 population 5 to 9 years old POP22_AGE_10_14: 2022 population 10 to 14 years old POP22_AGE_15_17: 2022 population 15 to 17 years old POP22_AGE_18_19: 2022 population 18 to 19 years old POP22_AGE_20_44: 2022 population 20 to 24 years old POP22_AGE_25_29: 2022 population 25 to 29 years old POP22_AGE_30_34: 2022 population 30 to 34 years old POP22_AGE_35_44: 2022 population 35 to 44 years old POP22_AGE_45_54: 2022 population 45 to 54 years old POP22_AGE_55_64: 2022 population 55 to 64 years old POP22_AGE_65_74: 2022 population 65 to 74 years old POP22_AGE_75_84: 2022 population 75 to 84 years old POP22_AGE_85_100: 2022 population 85 years and older POP22_WHITE: 2022 Non-Hispanic White POP22_BLACK: 2022 Non-Hispanic African AmericanPOP22_AIAN: 2022 Non-Hispanic American Indian or Alaska NativePOP22_ASIAN: 2022 Non-Hispanic Asian POP22_HNPI: 2022 Non-Hispanic Hawaiian Native or Pacific IslanderPOP22_HISPANIC: 2022 HispanicPOP22_MALE: 2022 Male POP22_FEMALE: 2022 Female POV22_WHITE: 2022 Non-Hispanic White below 100% Federal Poverty Level POV22_BLACK: 2022 Non-Hispanic African American below 100% Federal Poverty Level POV22_AIAN: 2022 Non-Hispanic American Indian or Alaska Native below 100% Federal Poverty Level POV22_ASIAN: 2022 Non-Hispanic Asian below 100% Federal Poverty Level POV22_HNPI: 2022 Non-Hispanic Hawaiian Native or Pacific Islander below 100% Federal Poverty Level POV22_HISPANIC: 2022 Hispanic below 100% Federal Poverty Level POV22_TOTAL: 2022 Total population below 100% Federal Poverty Level POP22_TOTAL: 2022 Total PopulationAREA_SQMil: Area in square mile.POP22_DENSITY: Population per square mile.POV22_PERCENT: Poverty rate/percentage.How this data created?The tabular data of population by age groups, by ethnic groups and by gender, and the poverty by ethnic groups is attributed to the split tract geography to create this data. Split tract polygon data is created by intersecting 2020 census tract polygons, LA Country City Boundary polygons and Countywide Statistical Areas (CSA) polygon data. The resulting polygon boundary aligned and matched with the legal city boundary whenever possible. Note:1. Population and poverty data estimated as of July 1, 2022. 2. 2010 Census tract and 2020 census tracts are not the same. Similarly, city and community boundary are not the same because boundary is reviewed and updated annually.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. Results for sub-state geographic areas in New Mexico were released in a series of data products. These data come from Summary File 1 (SF-1). The geographic coverage for SF-1 includes the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, census tracts, block groups and blocks, among others. The data in these particular RGIS Clearinghouse tables are for New Mexico and all census tracts. There are two data tables in this file. Table DC10_00215 shows counts of males by eighteen 5-year age groups. Table DC10_00216 shows percent distribution of males by eighteen 5-year age groups. These files, along with file-specific descriptions (in Word and text formats) are available in a single zip file.

Tabular data of population by age groups, race and gender, and the poverty by race is attached to the split tract geography to create this split tract with population and poverty data. Split tract data is the product of 2010 census tracts split by 2016 incorporated city boundaries and unincorporated community/countywide statistical areas (CSA) boundaries. The census tract boundaries have been altered and aligned where necessary with legal city boundaries and unincorporated areas, including shoreline/coastal areas. Census Tract:Every 10 years the Census Bureau counts the population of the United States as mandated by Constitution. The Census Bureau (https://www.census.gov/) released 2010 geographic boundaries data including census tracts for the analysis and mapping of demographic information across the United States. City Boundary:City Boundary data is the base map information for the County of Los Angeles. These City Boundaries are based on the Los Angeles County Seamless Cadastral Landbase. The Landbase is jointly maintained by the Los Angeles County Assessor and the Los Angeles County Department of Public Works (DPW). This layer represents current city boundaries within Los Angeles County. The DPW provides the most current shapefiles representing city boundaries and city annexations. True, legal boundaries are only determined on the ground by surveyors licensed in the State of California.Countywide Statistical Areas (CSA): The countywide Statistical Area (CSA) was defined to provide a common geographic boundary for reporting departmental statistics for unincorporated areas and incorporated Los Angeles city to the Board of Supervisors. The CSA boundary and CSA names are established by the CIO and the LA County Enterprise GIS group worked with the Los Angeles County Board of Supervisors Unincorporated Area and Field Deputies that reflect as best as possible the general name preferences of residents and historical names of areas. This data is primarily focused on broad statistics and reporting, not mapping of communities. This data is not designed to perfectly represent communities, nor jurisdictional boundaries such as Angeles National Forest. CSA represent board approved geographies comprised of Census block groups split by cities.Data Field:CT10: 2010 Census tractFIP16: 2016 City FIP CodeCITY: City name for incorporated cities and “Unincorporated” for unincorporated areas (as of July 1, 2016) CSA: Countywide Statistical Area (CSA) - Unincorporated area community names and LA City neighborhood names.CT10FIP16CSA: 2010 census tract with 2016 city FIPs for incorporated cities, unincorporated areas and LA neighborhoods. SPA12: 2012 Service Planning Area (SPA) number.SPA_NAME: Service Planning Area name.HD12: 2012 Health District (HD) number: HD_NAME: Health District name.POP16_AGE_0_4: 2016 population 0 to 4 years oldPOP16_AGE_5_9: 2016 population 5 to 9 years old POP16_AGE_10_14: 2016 population 10 to 14 years old POP16_AGE_15_17: 2016 population 15 to 17 years old POP16_AGE_18_19: 2016 population 18 to 19 years old POP16_AGE_20_44: 2016 population 20 to 24 years old POP16_AGE_25_29: 2016 population 25 to 29 years old POP16_AGE_30_34: 2016 population 30 to 34 years old POP16_AGE_35_44: 2016 population 35 to 44 years old POP16_AGE_45_54: 2016 population 45 to 54 years old POP16_AGE_55_64: 2016 population 55 to 64 years old POP16_AGE_65_74: 2016 population 65 to 74 years old POP16_AGE_75_84: 2016 population 75 to 84 years old POP16_AGE_85_100: 2016 population 85 years and older POP16_WHITE: 2016 Non-Hispanic White POP16_BLACK: 2016 Non-Hispanic African AmericanPOP16_AIAN: 2016 Non-Hispanic American Indian or Alaska NativePOP16_ASIAN: 2016 Non-Hispanic Asian POP16_HNPI: 2016 Non-Hispanic Hawaiian Native or Pacific IslanderPOP16_HISPANIC: 2016 HispanicPOP16_MALE: 2016 Male POP16_FEMALE: 2016 Female POV16_WHITE: 2016 Non-Hispanic White below 100% Federal Poverty Level POV16_BLACK: 2016 Non-Hispanic African American below 100% Federal Poverty Level POV16_AIAN: 2016 Non-Hispanic American Indian or Alaska Native below 100% Federal Poverty Level POV16_ASIAN: 2016 Non-Hispanic Asian below 100% Federal Poverty Level POV16_HNPI: 2016 Non-Hispanic Hawaiian Native or Pacific Islander below 100% Federal Poverty Level POV16_HISPANIC: 2016 Hispanic below 100% Federal Poverty Level POV16_TOTAL: 2016 Total population below 100% Federal Poverty Level POP16_TOTAL: 2016 Total PopulationAREA_SQMIL: Area in square milePOP16_DENSITY: Population per square mile.POV16_PERCENT: Poverty rate/percentage.How this data created?The tabular data of population by age groups, by ethnic groups and by gender, and the poverty by ethnic groups is attributed to the split tract geography to create this data. Split tract polygon data is created by intersecting 2010 census tract polygons, LA Country City Boundary polygons and Countywide Statistical Areas (CSA) polygon data. The resulting polygon boundary aligned and matched with the legal city boundary whenever possible. Note:1. Population and poverty data estimated as of July 1, 2016. 2. 2010 Census tract and 2020 census tracts are not the same. Similarly, city and community boundary are not the same because boundary is reviewed and updated annually.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. Results for sub-state geographic areas in New Mexico were released in a series of data products. These data come from Summary File 1 (SF-1). The geographic coverage for SF-1 includes the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, census tracts, block groups and blocks, among others. The data in these particular RGIS Clearinghouse tables are for New Mexico and all census tracts in the state. There are two data tables in this file. Table DC10_00586 shows the number of households by the following categories--total households; total family households; husband-wife family households; total other family households; male householder, no wife present; female householder, no husband present; total nonfamily households; nonfamily households with householder living along; and finally, nonfamily households with householder not living alone. Table DC10_00587 shows percent distribution of households for each of these same categories. These files, along with file-specific descriptions (in Word and text formats) are available in a single zip file.

description: The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in these particular RGIS Clearinghouse tables are for all census tracts in New Mexico. This table provides total counts of population. This file, along with file-specific descriptions (in Word and text formats) are available in a single zip file.; abstract: The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in these particular RGIS Clearinghouse tables are for all census tracts in New Mexico. This table provides total counts of population. This file, along with file-specific descriptions (in Word and text formats) are available in a single zip file.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. Results for sub-state geographic areas in New Mexico were released in a series of data products. These data come from Summary File 1 (SF-1). The geographic coverage for SF-1 includes the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, census tracts, block groups and blocks, among others. Table DC10_00791 is for New Mexico and all census tracts in the state. The table shows average household size for all occupied housing units combined and for owner- and renter-occupied housing units. This file, along with file descriptions (in Word and text formats) are available in a single zip file.

Age and Gender Demographics in the 2010 CensusThis feature layer, utilizing data from the U.S. Census Bureau, displays 2010 demographics about age and gender in the U.S. for state, county, tract, and block group geographies. Per USCB, "Focusing on a population’s age and sex composition is one of the most basic ways to understand population change over time." The attributes cover topics such as population counts by 5-year age ranges, male and female population counts, and median age values. A small subset of attributes from the 2000 Census are also included as reference.The U.S. Census counts every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. Four layers are available: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas. Only one geography is in view at any time.Wisconsin Census Tract: 550791851.00Data currency: 2010Data source: Explore Census DataData modification: NoneFor more information:Population Profiles 2010State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies).For a list of fields and alias names, access the following excel document.For feedback please contact: ArcGIScomNationalMaps@esri.comU.S. Census BureauPer USCB, "the Census Bureau is the federal government’s largest statistical agency. We are dedicated to providing current facts and figures about America’s people, places, and economy. Federal law protects the confidentiality of all the information the Census Bureau collects."

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. Results for sub-state geographic areas in New Mexico were released in a series of data products. These data come from Summary File 1 (SF-1). The geographic coverage for SF-1 includes the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, census tracts, block groups and blocks, among others. The data in these particular RGIS Clearinghouse tables are for New Mexico and all census tracts in the state. There are two data tables in this file that show housing units by vacancy status (type of vacancy). Table DC10_01031 shows the number of vacant housing units by the following categories--total, for rent, rented but not yet occupied, for sale only, sold but not yet occupied, seasonal or recreational or occasional use, for migrant workers, and vacant for some other reason. Table DC10_01032 shows percent distribution of housing units for each of these same categories. These files, along with file-specific descriptions (in Word and text formats) are available in a single zip file.

Tabular data of population by age groups, race and gender, and the poverty by race is attached to the split tract geography to create this split tract with population and poverty data. Split tract data is the product of 2020 census tracts split by 2021 incorporated city boundaries and unincorporated community/countywide statistical areas (CSA) boundaries. The census tract boundaries have been altered and aligned where necessary with legal city boundaries and unincorporated areas, including shoreline/coastal areas. Census Tract:Every 10 years the Census Bureau counts the population of the United States as mandated by Constitution. The Census Bureau (https://www.census.gov/) released 2020 geographic boundaries data including census tracts for the analysis and mapping of demographic information across the United States. City Boundary:City Boundary data is the base map information for the County of Los Angeles. These City Boundaries are based on the Los Angeles County Seamless Cadastral Landbase. The Landbase is jointly maintained by the Los Angeles County Assessor and the Los Angeles County Department of Public Works (DPW). This layer represents current city boundaries within Los Angeles County. The DPW provides the most current shapefiles representing city boundaries and city annexations. True, legal boundaries are only determined on the ground by surveyors licensed in the State of California.Countywide Statistical Areas (CSA): The countywide Statistical Area (CSA) was defined to provide a common geographic boundary for reporting departmental statistics for unincorporated areas and incorporated Los Angeles city to the Board of Supervisors. The CSA boundary and CSA names are established by the CIO and the LA County Enterprise GIS group worked with the Los Angeles County Board of Supervisors Unincorporated Area and Field Deputies that reflect as best as possible the general name preferences of residents and historical names of areas. This data is primarily focused on broad statistics and reporting, not mapping of communities. This data is not designed to perfectly represent communities, nor jurisdictional boundaries such as Angeles National Forest. CSA represent board approved geographies comprised of Census block groups split by cities.Data Field:CT20: 2020 Census tractFIP21: 2021 City FIP CodeCITY: City name for incorporated cities and “Unincorporated” for unincorporated areas (as of July 1, 2021) CSA: Countywide Statistical Area (CSA) - Unincorporated area community names and LA City neighborhood names.CT20FIP21CSA: 2020 census tract with 2021 city FIPs for incorporated cities, unincorporated areas and LA neighborhoods. SPA22: 2022 Service Planning Area (SPA) number.SPA_NAME: Service Planning Area name.HD22: 2022 Health District (HD) number: HD_NAME: Health District name.POP21_AGE_0_4: 2021 population 0 to 4 years oldPOP21_AGE_5_9: 2021 population 5 to 9 years old POP21_AGE_10_14: 2021 population 10 to 14 years old POP21_AGE_15_17: 2021 population 15 to 17 years old POP21_AGE_18_19: 2021 population 18 to 19 years old POP21_AGE_20_44: 2021 population 20 to 24 years old POP21_AGE_25_29: 2021 population 25 to 29 years old POP21_AGE_30_34: 2021 population 30 to 34 years old POP21_AGE_35_44: 2021 population 35 to 44 years old POP21_AGE_45_54: 2021 population 45 to 54 years old POP21_AGE_55_64: 2021 population 55 to 64 years old POP21_AGE_65_74: 2021 population 65 to 74 years old POP21_AGE_75_84: 2021 population 75 to 84 years old POP21_AGE_85_100: 2021 population 85 years and older POP21_WHITE: 2021 Non-Hispanic White POP21_BLACK: 2021 Non-Hispanic African AmericanPOP21_AIAN: 2021 Non-Hispanic American Indian or Alaska NativePOP21_ASIAN: 2021 Non-Hispanic Asian POP21_HNPI: 2021 Non-Hispanic Hawaiian Native or Pacific IslanderPOP21_HISPANIC: 2021 HispanicPOP21_MALE: 2021 Male POP21_FEMALE: 2021 Female POV21_WHITE: 2021 Non-Hispanic White below 100% Federal Poverty Level POV21_BLACK: 2021 Non-Hispanic African American below 100% Federal Poverty Level POV21_AIAN: 2021 Non-Hispanic American Indian or Alaska Native below 100% Federal Poverty Level POV21_ASIAN: 2021 Non-Hispanic Asian below 100% Federal Poverty Level POV21_HNPI: 2021 Non-Hispanic Hawaiian Native or Pacific Islander below 100% Federal Poverty Level POV21_HISPANIC: 2021 Hispanic below 100% Federal Poverty Level POV21_TOTAL: 2021 Total population below 100% Federal Poverty Level POP21_TOTAL: 2021 Total PopulationAREA_SQMIL: Area in square milePOP21_DENSITY: Population per square mile.POV21_PERCENT: Poverty percentage.How this data created?The tabular data of population by age groups, by ethnic groups and by gender, and the poverty by ethnic groups is attributed to the split tract geography to create this data. Split tract polygon data is created by intersecting 2020 census tract polygons, LA Country City Boundary polygons and Countywide Statistical Areas (CSA) polygon data. The resulting polygon boundary aligned and matched with the legal city boundary whenever possible. Note:1. Population and poverty data estimated as of July 1, 2021. 2. 2010 Census tract and 2020 census tracts are not the same. Similarly, city and community boundary are not the same because boundary is reviewed and updated annually.

Historical population as enumerated and corrected from 1790 through 2020. North Carolina was one of the 13 original States and by the time of the 1790 census had essentially its current boundaries. The Census is mandated by the United States Constitution and was first completed for 1790. The population has been counted every ten years hence, with some limitations. In 1790 census coverage included most of the State, except for areas in the west, parts of which were not enumerated until 1840. The population for 1810 includes Walton County, enumerated as part of Georgia although actually within North Carolina. Historical populations shown here reflect the population of the respective named county and not necessarily the population of the area of the county as it was defined for a particular census. County boundaries shown in maps reflect boundaries as defined in 2020. Historic boundaries for some counties may include additional geographic areas or may be smaller than the current geographic boundaries. Notes below list the county or counties with which the population of a currently defined county were enumerated historically (Current County: Population counted in). The current 100 counties have been in place since the 1920 Census, although some modifications to the county boundaries have occurred since that time. For historical county boundaries see: Atlas of Historical County Boundaries Project (newberry.org)County Notes: Note 1: Total for 1810 includes population (1,026) of Walton County, reported as a Georgia county but later determined to be situated in western North Carolina. Total for 1890 includes 2 Indians in prison, not reported by county. Note 2: Alexander: *Iredell, Burke, Wilkes. Note 3: Avery: *Caldwell, Mitchell, Watauga. Note 4: Buncombe: *Burke, Rutherford; see also note 22. Note 5: Caldwell: *Burke, Wilkes, Yancey. Note 6: Cleveland: *Rutherford, Lincoln. Note 7: Columbus: *Bladen, Brunswick. Note 8: Dare: *Tyrrell, Currituck, Hyde. Note 9: Hoke: *Cumberland, Robeson. Note 10: Jackson: *Macon, Haywood. Note 11: Lee: *Moore, Chatham. Note 12: Lenoir: *Dobbs (Greene); Craven. Note 13: McDowell: *Burke, Rutherford. Note 14: Madison: *Buncombe, Yancey. Note 15: Mitchell: *Yancey, Watauga. Note 16: Pamlico: *Craven, Beaufort. Note 17: Polk: *Rutherford, Henderson. Note 18: Swain: *Jackson, Macon. Note 19: Transylvania: *Henderson, Jackson. Note 20: Union: *Mecklenburg, Anson. Note 21: Vance: *Granville, Warren, Franklin. Note 22: Walton: Created in 1803 as a Georgia county and reported in 1810 as part of Georgia; abolished after a review of the State boundary determined that its area was located in North Carolina. By 1820 it was part of Buncombe County. Note 23: Watauga: *Ashe, Yancey, Wilkes; Burke. Note 24: Wilson: *Edgecombe, Nash, Wayne, Johnston. Note 25: Yancey: *Burke, Buncombe. Note 26: Alleghany: *Ashe. Note 27: Haywood: *Buncombe. Note 28: Henderson: *Buncombe. Note 29: Person: Caswell. Note 30: Clay: Cherokee. Note 31: Graham: Cherokee. Note 32: Harnett: Cumberland. Note 33: Macon: Haywood.

Note 34: Catawba: Lincoln. Note 35: Gaston: Lincoln. Note 36: Cabarrus: Mecklenburg.
Note 37: Stanly: Montgomery. Note 38: Pender: New Hanover. Note 39: Alamance: Orange.
Note 40: Durham: Orange, Wake. Note 41: Scotland: Richmond. Note 42: Davidson: Rowan. Note 43: Davie: Rowan.Note 44: Forsyth: Stokes. Note 45: Yadkin: Surry.
Note 46: Washington: Tyrrell.Note 47: Ashe: Wilkes. Part III. Population of Counties, Earliest Census to 1990The 1840 population of Person County, NC should be 9,790. The 1840 population of Perquimans County, NC should be 7,346.