Abstract

This survey provides information on household income and expenditure leading to measure the levels and changes of the living conditions of the people and to observe the consumption patterns .

Key objectives of the survey - To identify the income patterns in Urban, Rural and Estate Sectors & provinces. - To identify the income patterns by income levels. - Average consumption of food items and non food items - Expenditure patterns by sector and by income level.

Geographic coverage

National coverage.

Analysis unit

Household, Individuals

Universe

For this survey a sample of buildings and the occupants therein was drawn from the whole island

Kind of data

Sample survey data [ssd]

Sampling procedure

A two stage stratified random sample design was used in the survey. Urban, Rural and Estate sectors of the Districts were the domains for stratification. The sample frame was the list of buildings that were prepared for the Census of Population and Housing 2001.

Selection of Primary Sampling Units (PSU's) Primary sampling units are the census blocks prepared for the Census of Population and Housing - 2001. The sample frame, which is a collection of all census blocks in the domain, was used for the selection of primary sampling units. A sample of 500 primary sampling units was selected from the sampling frame for the survey.

Selection of Secondary Sampling Units (SSU's) Secondary Sampling Units are the housing units in the selected 500 primary sampling units (census blocks). From each primary sampling unit 10 housing units (SSU) were selected for the survey. The total sample size of 5000 housing units was selected and distributed among Districts in Sri Lanka.

Mode of data collection

Face-to-face [f2f]

Research instrument

Questionaires

       The survey schedule was designed to collect data by household and separate schedules were used for each household identified according to the definition of the household within the housing units selected for the survey. The survey schedule consists three main sections . 

       1. Demographic section 
       2. Expenditure
       3. Income

The Demographic characteristics and usual activities of the inmates belonging to the household were reported in the Demographic section of the schedule (and close relatives temporarily living away are also listed in this section). Expenditure section has two sub sections to report food and non-food consumption data separately. Expenditure incurred on their own decisions by boarders and servants are recorded in the sub section under the Main expenditure section. The income has seven sub sections categorized according to the main sources of income.

Sampling error estimates

The exact differences or sampling error ,varies depending on the particular sample selected and the variability is measured by the standard error of the estimate. There is about a 95% chance or level of confidence that an estimate based on a sample will differ by no more than 1.96 standard errors from the true population value because of sampling error. Analyses relating to the HIES are generally conducted at the 95% level of confidence .

          confidence interval =  Estimate value ± (standard error )*(1.96)

Data appraisal

http://www.statistics.gov.lk/HIES/HIES%202007/introduction%20%20HIES.pdf

By visiting the above website a description about the adjustments for non-response could be read in section 1.2 of the Final report.

Abstract

The primary objective of the 2017 Indonesia Dmographic and Health Survey (IDHS) is to provide up-to-date estimates of basic demographic and health indicators. The IDHS provides a comprehensive overview of population and maternal and child health issues in Indonesia. More specifically, the IDHS was designed to: - provide data on fertility, family planning, maternal and child health, and awareness of HIV/AIDS and sexually transmitted infections (STIs) to help program managers, policy makers, and researchers to evaluate and improve existing programs; - measure trends in fertility and contraceptive prevalence rates, and analyze factors that affect such changes, such as residence, education, breastfeeding practices, and knowledge, use, and availability of contraceptive methods; - evaluate the achievement of goals previously set by national health programs, with special focus on maternal and child health; - assess married men’s knowledge of utilization of health services for their family’s health and participation in the health care of their families; - participate in creating an international database to allow cross-country comparisons in the areas of fertility, family planning, and health.

Geographic coverage

National coverage

Analysis unit

• Household
• Individual
• Children age 0-5
• Woman age 15-49
• Man age 15-54

Universe

The survey covered all de jure household members (usual residents), all women age 15-49 years resident in the household, and all men age 15-54 years resident in the household.

Kind of data

Sample survey data [ssd]

Sampling procedure

The 2017 IDHS sample covered 1,970 census blocks in urban and rural areas and was expected to obtain responses from 49,250 households. The sampled households were expected to identify about 59,100 women age 15-49 and 24,625 never-married men age 15-24 eligible for individual interview. Eight households were selected in each selected census block to yield 14,193 married men age 15-54 to be interviewed with the Married Man's Questionnaire. The sample frame of the 2017 IDHS is the Master Sample of Census Blocks from the 2010 Population Census. The frame for the household sample selection is the updated list of ordinary households in the selected census blocks. This list does not include institutional households, such as orphanages, police/military barracks, and prisons, or special households (boarding houses with a minimum of 10 people).

The sampling design of the 2017 IDHS used two-stage stratified sampling: Stage 1: Several census blocks were selected with systematic sampling proportional to size, where size is the number of households listed in the 2010 Population Census. In the implicit stratification, the census blocks were stratified by urban and rural areas and ordered by wealth index category.

Stage 2: In each selected census block, 25 ordinary households were selected with systematic sampling from the updated household listing. Eight households were selected systematically to obtain a sample of married men.

For further details on sample design, see Appendix B of the final report.

Mode of data collection

Face-to-face [f2f]

Research instrument

The 2017 IDHS used four questionnaires: the Household Questionnaire, Woman’s Questionnaire, Married Man’s Questionnaire, and Never Married Man’s Questionnaire. Because of the change in survey coverage from ever-married women age 15-49 in the 2007 IDHS to all women age 15-49, the Woman’s Questionnaire had questions added for never married women age 15-24. These questions were part of the 2007 Indonesia Young Adult Reproductive Survey Questionnaire. The Household Questionnaire and the Woman’s Questionnaire are largely based on standard DHS phase 7 questionnaires (2015 version). The model questionnaires were adapted for use in Indonesia. Not all questions in the DHS model were included in the IDHS. Response categories were modified to reflect the local situation.

Cleaning operations

All completed questionnaires, along with the control forms, were returned to the BPS central office in Jakarta for data processing. The questionnaires were logged and edited, and all open-ended questions were coded. Responses were entered in the computer twice for verification, and they were corrected for computer-identified errors. Data processing activities were carried out by a team of 34 editors, 112 data entry operators, 33 compare officers, 19 secondary data editors, and 2 data entry supervisors. The questionnaires were entered twice and the entries were compared to detect and correct keying errors. A computer package program called Census and Survey Processing System (CSPro), which was specifically designed to process DHS-type survey data, was used in the processing of the 2017 IDHS.

Response rate

Of the 49,261 eligible households, 48,216 households were found by the interviewer teams. Among these households, 47,963 households were successfully interviewed, a response rate of almost 100%.

In the interviewed households, 50,730 women were identified as eligible for individual interview and, from these, completed interviews were conducted with 49,627 women, yielding a response rate of 98%. From the selected household sample of married men, 10,440 married men were identified as eligible for interview, of which 10,009 were successfully interviewed, yielding a response rate of 96%. The lower response rate for men was due to the more frequent and longer absence of men from the household. In general, response rates in rural areas were higher than those in urban areas.

Sampling error estimates

The estimates from a sample survey are affected by two types of errors: (1) nonsampling errors and (2) sampling errors. Nonsampling errors result from mistakes made in implementing data collection and data processing, such as failure to locate and interview the correct household, misunderstanding the questions on the part of either the interviewer or the respondent, and data entry errors. Although numerous efforts were made during the implementation of the 2017 Indonesia Demographic and Health Survey (2017 IDHS) to minimize this type of error, nonsampling errors are impossible to avoid and difficult to evaluate statistically.

Sampling errors, on the other hand, can be evaluated statistically. The sample of respondents selected in the 2017 IDHS is only one of many samples that could have been selected from the same population, using the same design and identical size. Each of these samples would yield results that differ somewhat from the results of the actual sample selected. Sampling error is a measure of the variability among all possible samples. Although the degree of variability is not known exactly, it can be estimated from the survey results.

A sampling error is usually measured in terms of the standard error for a particular statistic (mean, percentage, etc.), which is the square root of the variance. The standard error can be used to calculate confidence intervals within which the true value for the population can reasonably be assumed to fall. For example, for any given statistic calculated from a sample survey, the value of that statistic will fall within a range of plus or minus two times the standard error of that statistic in 95 percent of all possible samples of identical size and design.

If the sample of respondents had been selected as a simple random sample, it would have been possible to use straightforward formulas for calculating sampling errors. However, the 2017 IDHS sample is the result of a multi-stage stratified design, and, consequently, it was necessary to use more complex formulas. The computer software used to calculate sampling errors for the 2017 IDHS is a STATA program. This program used the Taylor linearization method for variance estimation for survey estimates that are means or proportions. The Jackknife repeated replication method is used for variance estimation of more complex statistics such as fertility and mortality rates.

A more detailed description of estimates of sampling errors are presented in Appendix C of the survey final report.

Data appraisal

Data Quality Tables - Household age distribution - Age distribution of eligible and interviewed women - Age distribution of eligible and interviewed men - Completeness of reporting - Births by calendar year - Reporting of age at death in days - Reporting of age at death in months

See details of the data quality tables in Appendix D of the survey final report.

Key Table Information.Table Title.Construction: Location of Construction Establishments by Employment Size for the U.S. and States: 2022.Table ID.ECNLOCCONS2022.EC2223LOCCONS.Survey/Program.Economic Census.Year.2022.Dataset.ECN Sector Statistics Economic Census: Construction: Location of Construction Establishments by Employment Size for the U.S. and States.Source.U.S. Census Bureau, 2022 Economic Census, Sector Statistics.Release Date.2025-05-15.Release Schedule.The Economic Census occurs every five years, in years ending in 2 and 7.The data in this file come from the 2022 Economic Census data files released on a flow basis starting in January 2024 with First Look Statistics. Preliminary U.S. totals released in January 2024 are superseded with final data shown in the releases of later economic census statistics through March 2026.For more information about economic census planned data product releases, see 2022 Economic Census Release Schedule..Dataset Universe.The dataset universe consists of all establishments that are in operation for at least some part of 2022, are located in one of the 50 U.S. states, associated offshore areas, or the District of Columbia, have paid employees, and are classified in one of nineteen in-scope sectors defined by the 2022 North American Industry Classification System (NAICS)..Methodology.Data Items and Other Identifying Records.Employment size of establishmentsNumber of establishmentsDefinitions can be found by clicking on the column header in the table or by accessing the Economic Census Glossary..Unit(s) of Observation.The reporting units for the economic census are employer establishments. An establishment is generally a single physical location where business is conducted or where services or industrial operations are performed. A company or firm is comprised of one or more in-scope establishments that operate under the ownership or control of a single organization. For some industries, the reporting units are instead groups of all establishments in the same industry belonging to the same firm..Geography Coverage.The data are shown for the U.S. and State levels that vary by industry. For information about economic census geographies, including changes for 2022, see Geographies..Industry Coverage.The data are shown at the 2- through 6-digit 2022 NAICS code levels for U.S. and States. For information about NAICS, see Economic Census Code Lists..Sampling.The 2022 Economic Census sample includes all active operating establishments of multi-establishment firms and approximately 1.7 million single-establishment firms, stratified by industry and state. Establishments selected to the sample receive a questionnaire. For all data on this table, establishments not selected into the sample are represented with administrative data. For more information about the sample design, see 2022 Economic Census Methodology..Confidentiality.The Census Bureau has reviewed this data product to ensure appropriate access, use, and disclosure avoidance protection of the confidential source data (Project No. 7504609, Disclosure Review Board (DRB) approval number: CBDRB-FY23-099).To protect confidentiality, the U.S. Census Bureau suppresses cell values to minimize the risk of identifying a particular business’ data or identity.To comply with disclosure avoidance guidelines, data rows with fewer than three contributing firms or three contributing establishments are not presented. Additionally, establishment counts are suppressed when other select statistics in the same row are suppressed. More information on disclosure avoidance is available in the 2022 Economic Census Methodology..Technical Documentation/Methodology.For detailed information about the methods used to collect data and produce statistics, survey questionnaires, Primary Business Activity/NAICS codes, NAPCS codes, and more, see Economic Census Technical Documentation..Weights.No weighting applied as establishments not sampled are represented with administrative data..Table Information.FTP Download.https://www2.census.gov/programs-surveys/economic-census/data/2022/sector23/.API Information.Economic census data are housed in the Census Bureau Application Programming Interface (API)..Symbols.D - Withheld to avoid disclosing data for individual companies; data are included in higher level totalsN - Not available or not comparableS - Estimate does not meet publication standards because of high sampling variability, poor response quality, or other concerns about the estimate quality. Unpublished estimates derived from this table by subtraction are subject to these same limitations and should not be attributed to the U.S. Census Bureau. For a description of publication standards and the total quantity response rate, see link to program methodology page.X - Not applicableA - Relative standard error of 100% or morer - Reviseds - Relative standard error exceeds 40%For a complete list of symbols, see Economic Census Data Dictionary..Data-Specifi...

A broad and generalized selection of 2014-2018 US Census Bureau 2018 5-year American Community Survey population data estimates, obtained via Census API and joined to the appropriate geometry (in this case, New Mexico Census tracts). The selection is not comprehensive, but allows a first-level characterization of total population, male and female, and both broad and narrowly-defined age groups. In addition to the standard selection of age-group breakdowns (by male or female), the dataset provides supplemental calculated fields which combine several attributes into one (for example, the total population of persons under 18, or the number of females over 65 years of age). The determination of which estimates to include was based upon level of interest and providing a manageable dataset for users.The U.S. Census Bureau's American Community Survey (ACS) is a nationwide, continuous survey designed to provide communities with reliable and timely demographic, housing, social, and economic data every year. The ACS collects long-form-type information throughout the decade rather than only once every 10 years. The ACS combines population or housing data from multiple years to produce reliable numbers for small counties, neighborhoods, and other local areas. To provide information for communities each year, the ACS provides 1-, 3-, and 5-year estimates. ACS 5-year estimates (multiyear estimates) are “period” estimates that represent data collected over a 60-month period of time (as opposed to “point-in-time” estimates, such as the decennial census, that approximate the characteristics of an area on a specific date). ACS data are released in the year immediately following the year in which they are collected. ACS estimates based on data collected from 2009–2014 should not be called “2009” or “2014” estimates. Multiyear estimates should be labeled to indicate clearly the full period of time. While the ACS contains margin of error (MOE) information, this dataset does not. Those individuals requiring more complete data are directed to download the more detailed datasets from the ACS American FactFinder website. This dataset is organized by Census tract boundaries in New Mexico. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Census Data is collected every 10 years by mail surveys to every household with primary data collection fields of population, gender, race and number of occupants. Data includes demographics, education level, commute information, and more subset to Colorado by the Department of Local Affairs (DOLA).

Splitgraph serves as an HTTP API that lets you run SQL queries directly on this data to power Web applications. For example:

See the Splitgraph documentation for more information.

Background

The main population base for published statistical tables from the 2011 Census in Northern Ireland is the usual resident population base as at Census day, 27 March 2011. By way of background, for 2011 Census purposes a usual resident of the United Kingdom (UK) is anyone who, on Census day, was in the UK and had stayed or intended to stay in the UK for a period of 12 months or more, or had a permanent UK address and was outside the UK and had intended to be outside the UK for less than 12 months.

Against this background, the 2011 Census Microdata Sample of Anonymised Records (SARs) Teaching File comprises a sample of 19,862 records (approximately 1 per cent) relating to people who were usually resident in Northern Ireland at the time of the 2011 Census. For each individual, information is available for seventeen separate characteristics (for example, sex, age, marital status) to varying degrees of detail. Both the size of the sample and the content of the records in the file have been harmonised, wherever possible, with the equivalent SARs teaching file that the Office for National Statistics simultaneously released for England and Wales.

Purpose

The primary purpose of the teaching file, which comprises unit-record level data as opposed to statistical aggregates, is as an educational tool aimed at:

• encouraging wider use of Census data by facilitating another way of examining Census data, for example through the building of statistical models, over and above that already available through the raft of standard tabular output released to date;
• providing a broad insight into the sort of detail that is generally included in a SARs product, along with data formats and any associated metadata. This will enable users (arguably those less experienced at using SARs products) to ‘play’ with the data and increase their knowledge and skills in readiness for accessing the more detailed SARs products that are planned and will be available in, for example, a safe setting; and
• assisting with the teaching of statistics and geography at GCSE and higher levels.

Census tracts as of 2018."Census Tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity that are updated by local participants prior to each decennial census as part of the Census Bureau's Participant Statistical Areas Program. The Census Bureau delineates census tracts in situations where no local participant existed or where state, local, or tribal governments declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of statistical data.Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. A census tract usually covers a contiguous area; however, the spatial size of census tracts varies widely depending on the density of settlement. Census tract boundaries are delineated with the intention of being maintained over a long time so that statistical comparisons can be made from census to census. Census tracts occasionally are split due to population growth or merged as a result of substantial population decline.Census tract boundaries generally follow visible and identifiable features. They may follow nonvisible legal boundaries, such as minor civil division (MCD) or incorporated place boundaries in some states and situations, to allow for census-tract-to-governmental-unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. Tribal census tracts are a unique geographic entity defined within federally recognized American Indian reservations and off-reservation trust lands and can cross state and county boundaries. Tribal census tracts may be completely different from the census tracts and block groups defined by state and county.Census Tract Codes and Numbers—Census tracts are identified by an up to four-digit integer number and may have an optional two-digit suffix; for example 1457.02 or 23. The census tract codes consist of six digits with an implied decimal between the fourth and fifth digit corresponding to the basic census tract number but with leading zeroes and trailing zeroes for census tracts without a suffix. The tract number examples above would have codes of 145702 and 002300, respectively."- US Census Bureau For information about US Census Bureau geographies, click here. USE CONSTRAINTS: The Alaska Department of Commerce, Community, and Economic Development (DCCED) provides the data in this application as a service to the public. DCCED makes no warranty, representation, or guarantee as to the content, accuracy, timeliness, or completeness of any of the data provided on this site. DCCED shall not be liable to the user for damages of any kind arising out of the use of data or information provided. DCCED is not the authoritative source for American Community Survey data, and any data or information provided by DCCED is provided "as is". Data or information provided by DCCED shall be used and relied upon only at the user's sole risk.

Abstract

The primary objective of the 2012 Indonesia Demographic and Health Survey (IDHS) is to provide policymakers and program managers with national- and provincial-level data on representative samples of all women age 15-49 and currently-married men age 15-54.

The 2012 IDHS was specifically designed to meet the following objectives: • Provide data on fertility, family planning, maternal and child health, adult mortality (including maternal mortality), and awareness of AIDS/STIs to program managers, policymakers, and researchers to help them evaluate and improve existing programs; • Measure trends in fertility and contraceptive prevalence rates, and analyze factors that affect such changes, such as marital status and patterns, residence, education, breastfeeding habits, and knowledge, use, and availability of contraception; • Evaluate the achievement of goals previously set by national health programs, with special focus on maternal and child health; • Assess married men’s knowledge of utilization of health services for their family’s health, as well as participation in the health care of their families; • Participate in creating an international database that allows cross-country comparisons that can be used by the program managers, policymakers, and researchers in the areas of family planning, fertility, and health in general

Geographic coverage

National coverage

Analysis unit

• Household
• Women age 15-49
• Ever married men age 15-54
• Never married men age 15-24

Kind of data

Sample survey data [ssd]

Sampling procedure

Indonesia is divided into 33 provinces. Each province is subdivided into districts (regency in areas mostly rural and municipality in urban areas). Districts are subdivided into subdistricts, and each subdistrict is divided into villages. The entire village is classified as urban or rural.

The 2012 IDHS sample is aimed at providing reliable estimates of key characteristics for women age 15-49 and currently-married men age 15-54 in Indonesia as a whole, in urban and rural areas, and in each of the 33 provinces included in the survey. To achieve this objective, a total of 1,840 census blocks (CBs)-874 in urban areas and 966 in rural areas-were selected from the list of CBs in the selected primary sampling units formed during the 2010 population census.

Because the sample was designed to provide reliable indicators for each province, the number of CBs in each province was not allocated in proportion to the population of the province or its urban-rural classification. Therefore, a final weighing adjustment procedure was done to obtain estimates for all domains. A minimum of 43 CBs per province was imposed in the 2012 IDHS design.

Refer to Appendix B in the final report for details of sample design and implementation.

Mode of data collection

Face-to-face [f2f]

Research instrument

The 2012 IDHS used four questionnaires: the Household Questionnaire, the Woman’s Questionnaire, the Currently Married Man’s Questionnaire, and the Never-Married Man’s Questionnaire. Because of the change in survey coverage from ever-married women age 15-49 in the 2007 IDHS to all women age 15-49 in the 2012 IDHS, the Woman’s Questionnaire now has questions for never-married women age 15-24. These questions were part of the 2007 Indonesia Young Adult Reproductive Survey questionnaire.

The Household and Woman’s Questionnaires are largely based on standard DHS phase VI questionnaires (March 2011 version). The model questionnaires were adapted for use in Indonesia. Not all questions in the DHS model were adopted in the IDHS. In addition, the response categories were modified to reflect the local situation.

The Household Questionnaire was used to list all the usual members and visitors who spent the previous night in the selected households. Basic information collected on each person listed includes age, sex, education, marital status, education, and relationship to the head of the household. Information on characteristics of the housing unit, such as the source of drinking water, type of toilet facilities, construction materials used for the floor, roof, and outer walls of the house, and ownership of various durable goods were also recorded in the Household Questionnaire. These items reflect the household’s socioeconomic status and are used to calculate the household wealth index. The main purpose of the Household Questionnaire was to identify women and men who were eligible for an individual interview.

The Woman’s Questionnaire was used to collect information from all women age 15-49. These women were asked questions on the following topics: • Background characteristics (marital status, education, media exposure, etc.) • Reproductive history and fertility preferences • Knowledge and use of family planning methods • Antenatal, delivery, and postnatal care • Breastfeeding and infant and young children feeding practices • Childhood mortality • Vaccinations and childhood illnesses • Marriage and sexual activity • Fertility preferences • Woman’s work and husband’s background characteristics • Awareness and behavior regarding HIV-AIDS and other sexually transmitted infections (STIs) • Sibling mortality, including maternal mortality • Other health issues

Questions asked to never-married women age 15-24 addressed the following: • Additional background characteristics • Knowledge of the human reproduction system • Attitudes toward marriage and children • Role of family, school, the community, and exposure to mass media • Use of tobacco, alcohol, and drugs • Dating and sexual activity

The Man’s Questionnaire was administered to all currently married men age 15-54 living in every third household in the 2012 IDHS sample. This questionnaire includes much of the same information included in the Woman’s Questionnaire, but is shorter because it did not contain questions on reproductive history or maternal and child health. Instead, men were asked about their knowledge of and participation in health-careseeking practices for their children.

The questionnaire for never-married men age 15-24 includes the same questions asked to nevermarried women age 15-24.

Cleaning operations

All completed questionnaires, along with the control forms, were returned to the BPS central office in Jakarta for data processing. The questionnaires were logged and edited, and all open-ended questions were coded. Responses were entered in the computer twice for verification, and they were corrected for computeridentified errors. Data processing activities were carried out by a team of 58 data entry operators, 42 data editors, 14 secondary data editors, and 14 data entry supervisors. A computer package program called Census and Survey Processing System (CSPro), which was specifically designed to process DHS-type survey data, was used in the processing of the 2012 IDHS.

Response rate

The response rates for both the household and individual interviews in the 2012 IDHS are high. A total of 46,024 households were selected in the sample, of which 44,302 were occupied. Of these households, 43,852 were successfully interviewed, yielding a household response rate of 99 percent.

Refer to Table 1.2 in the final report for more detailed summarized results of the of the 2012 IDHS fieldwork for both the household and individual interviews, by urban-rural residence.

Sampling error estimates

The estimates from a sample survey are affected by two types of errors: (1) nonsampling errors, and (2) sampling errors. Nonsampling errors are the results of mistakes made in implementing data collection and data processing, such as failure to locate and interview the correct household, misunderstanding of the questions on the part of either the interviewer or the respondent, and data entry errors. Although numerous efforts were made during the implementation of the 2012 Indonesia Demographic and Health Survey (2012 IDHS) to minimize this type of error, nonsampling errors are impossible to avoid and difficult to evaluate statistically.

Sampling errors, on the other hand, can be evaluated statistically. The sample of respondents selected in the 2012 IDHS is only one of many samples that could have been selected from the same population, using the same design and identical size. Each of these samples would yield results that differ somewhat from the results of the actual sample selected. Sampling error is a measure of the variability between all possible samples. Although the degree of variability is not known exactly, it can be estimated from the survey results.

A sampling error is usually measured in terms of the standard error for a particular statistic (mean, percentage, etc.), which is the square root of the variance. The standard error can be used to calculate confidence intervals within which the true value for the population can reasonably be assumed to fall. For example, for any given statistic calculated from a sample survey, the value of that statistic will fall within a range of plus or minus two times the standard error of that statistic in 95 percent of all possible samples of identical size and design.

If the sample of respondents had been selected as a simple random sample, it would have been possible to use straightforward formulas for calculating sampling errors. However, the 2012 IDHS sample is the result of a multi-stage stratified design, and, consequently, it was necessary to use more complex formulae. The computer software used to calculate sampling errors for the 2012 IDHS is a SAS program. This program used the Taylor linearization method

Abstract

The Jordan Population and Family Health Survey (JPFHS) is part of the worldwide Demographic and Health Surveys Program, which is designed to collect data on fertility, family planning, and maternal and child health.

The primary objective of the 2012 Jordan Population and Family Health Survey (JPFHS) is to provide reliable estimates of demographic parameters, such as fertility, mortality, family planning, and fertility preferences, as well as maternal and child health and nutrition, that can be used by program managers and policymakers to evaluate and improve existing programs. The JPFHS data will be useful to researchers and scholars interested in analyzing demographic trends in Jordan, as well as those conducting comparative, regional, or cross-national studies.

Geographic coverage

National coverage

Analysis unit

• Household
• Women age 15-49

Kind of data

Sample survey data [ssd]

Sampling procedure

Sample Design The 2012 JPFHS sample was designed to produce reliable estimates of major survey variables for the country as a whole, urban and rural areas, each of the 12 governorates, and for the two special domains: the Badia areas and people living in refugee camps. To facilitate comparisons with previous surveys, the sample was also designed to produce estimates for the three regions (North, Central, and South). The grouping of the governorates into regions is as follows: the North consists of Irbid, Jarash, Ajloun, and Mafraq governorates; the Central region consists of Amman, Madaba, Balqa, and Zarqa governorates; and the South region consists of Karak, Tafiela, Ma'an, and Aqaba governorates.

The 2012 JPFHS sample was selected from the 2004 Jordan Population and Housing Census sampling frame. The frame excludes the population living in remote areas (most of whom are nomads), as well as those living in collective housing units such as hotels, hospitals, work camps, prisons, and the like. For the 2004 census, the country was subdivided into convenient area units called census blocks. For the purposes of the household surveys, the census blocks were regrouped to form a general statistical unit of moderate size (30 households or more), called a "cluster", which is widely used in surveys as a primary sampling unit (PSU).

Stratification was achieved by first separating each governorate into urban and rural areas and then, within each urban and rural area, by Badia areas, refugee camps, and other. A two-stage sampling procedure was employed. In the first stage, 806 clusters were selected with probability proportional to the cluster size, that is, the number of residential households counted in the 2004 census. A household listing operation was then carried out in all of the selected clusters, and the resulting lists of households served as the sampling frame for the selection of households in the second stage. In the second stage of selection, a fixed number of 20 households was selected in each cluster with an equal probability systematic selection. A subsample of two-thirds of the selected households was identified for anthropometry measurements.

Refer to Appendix A in the final report (Jordan Population and Family Health Survey 2012) for details of sampling weights calculation.

Mode of data collection

Face-to-face [f2f]

Research instrument

The 2012 JPFHS used two questionnaires, namely the Household Questionnaire and the Woman’s Questionnaire (see Appendix D). The Household Questionnaire was used to list all usual members of the sampled households, and visitors who slept in the household the night before the interview, and to obtain information on each household member’s age, sex, educational attainment, relationship to the head of the household, and marital status. In addition, questions were included on the socioeconomic characteristics of the household, such as source of water, sanitation facilities, and the availability of durable goods. Moreover, the questionnaire included questions about child discipline. The Household Questionnaire was also used to identify women who were eligible for the individual interview (ever-married women age 15-49 years). In addition, all women age 15-49 and children under age 5 living in the subsample of households were eligible for height and weight measurement and anemia testing.

The Woman’s Questionnaire was administered to ever-married women age 15-49 and collected information on the following topics: • Respondent’s background characteristics • Birth history • Knowledge, attitudes, and practice of family planning and exposure to family planning messages • Maternal health (antenatal, delivery, and postnatal care) • Immunization and health of children under age 5 • Breastfeeding and infant feeding practices • Marriage and husband’s background characteristics • Fertility preferences • Respondent’s employment • Knowledge of AIDS and sexually transmitted infections (STIs) • Other health issues specific to women • Early childhood development • Domestic violence

In addition, information on births, pregnancies, and contraceptive use and discontinuation during the five years prior to the survey was collected using a monthly calendar.

The Household and Woman’s Questionnaires were based on the model questionnaires developed by the MEASURE DHS program. Additions and modifications to the model questionnaires were made in order to provide detailed information specific to Jordan. The questionnaires were then translated into Arabic.

Anthropometric data were collected during the 2012 JPFHS in a subsample of two-thirds of the selected households in each cluster. All women age 15-49 and children age 0-4 in these households were measured for height using Shorr height boards and for weight using electronic Seca scales. In addition, a drop of capillary blood was taken from these women and children in the field to measure their hemoglobin level using the HemoCue system. Hemoglobin testing was used to estimate the prevalence of anemia.

Cleaning operations

Fieldwork and data processing activities overlapped. Data processing began two weeks after the start of the fieldwork. After field editing of questionnaires for completeness and consistency, the questionnaires for each cluster were packaged together and sent to the central office in Amman, where they were registered and stored. Special teams were formed to carry out office editing and coding of the openended questions.

Data entry and verification started after two weeks of office data processing. The process of data entry, including 100 percent reentry, editing, and cleaning, was done by using PCs and the CSPro (Census and Survey Processing) computer package, developed specially for such surveys. The CSPro program allows data to be edited while being entered. Data processing operations were completed by early January 2013. A data processing specialist from ICF International made a trip to Jordan in February 2013 to follow up on data editing and cleaning and to work on the tabulation of results for the survey preliminary report, which was published in March 2013. The tabulations for this report were completed in April 2013.

Response rate

In all, 16,120 households were selected for the survey and, of these, 15,722 were found to be occupied households. Of these households, 15,190 (97 percent) were successfully interviewed.

In the households interviewed, 11,673 ever-married women age 15-49 were identified and interviews were completed with 11,352 women, or 97 percent of all eligible women.

Sampling error estimates

The estimates from a sample survey are affected by two types of errors: (1) nonsampling errors and (2) sampling errors. Nonsampling errors are the results of mistakes made in implementing data collection and data processing, such as failure to locate and interview the correct household, misunderstanding of the questions on the part of either the interviewer or the respondent, and data entry errors. Although numerous efforts were made during the implementation of the 2012 Jordan Population and Family Health Survey (JPFHS) to minimize this type of error, nonsampling errors are impossible to avoid and difficult to evaluate statistically.

Sampling errors, on the other hand, can be evaluated statistically. The sample of respondents selected in the 2012 JPFHS is only one of many samples that could have been selected from the same population, using the same design and identical size. Each of these samples would yield results that differ somewhat from the results of the actual sample selected. Sampling error is a measure of the variability between all possible samples. Although the degree of variability is not known exactly, it can be estimated from the survey results.

A sampling error is usually measured in terms of the standard error for a particular statistic (mean, percentage, etc.), which is the square root of the variance. The standard error can be used to calculate confidence intervals within which the true value for the population can reasonably be assumed to fall. For example, for any given statistic calculated from a sample survey, the value of that statistic will fall within a range of plus or minus two times the standard error of that statistic in 95 percent of all possible samples of identical size and design.

If the sample of respondents had been selected as a simple random sample, it would have been possible to use straightforward formulas for calculating sampling errors. However, the 2012 JPFHS sample is the result of a multistage stratified design, and, consequently, it was necessary to use more complex formulae. The computer

Key Table Information.Table Title.Wholesale Trade: Employment by Primary Function for the U.S.: 2022.Table ID.ECNEMPFUNC2022.EC2242EMPFUNC.Survey/Program.Economic Census.Year.2022.Dataset.ECN Sector Statistics Sector 42: Wholesale Trade.Source.U.S. Census Bureau, 2022 Economic Census, Sector Statistics.Release Date.2025-07-10.Release Schedule.The Economic Census occurs every five years, in years ending in 2 and 7.The data in this file come from the 2022 Economic Census data files released on a flow basis starting in January 2024 with First Look Statistics. Preliminary U.S. totals released in January 2024 are superseded with final data shown in the releases of later economic census statistics through March 2026.For more information about economic census planned data product releases, see 2022 Economic Census Release Schedule..Dataset Universe.The dataset universe consists of all establishments that are in operation for at least some part of 2022, are located in one of the 50 U.S. states, associated offshore areas, or the District of Columbia, have paid employees, and are classified in one of nineteen in-scope sectors defined by the 2022 North American Industry Classification System (NAICS)..Methodology.Data Items and Other Identifying Records.Number of establishmentsAnnual payroll ($1,000)Number of employeesResponse coverage of employment by function inquiry (%)Definitions can be found by clicking on the column header in the table or by accessing the Economic Census Glossary..Unit(s) of Observation.The reporting units for the economic census are employer establishments. An establishment is generally a single physical location where business is conducted or where services or industrial operations are performed. A company or firm is comprised of one or more in-scope establishments that operate under the ownership or control of a single organization. For some industries, the reporting units are instead groups of all establishments in the same industry belonging to the same firm..Geography Coverage.The data are shown for the U.S. level only. For information about economic census geographies, including changes for 2022, see Geographies..Industry Coverage.The data are shown at the 2- through 7-digit 2022 NAICS code levels and selected 8-digit 2022 NAICS-based code levels. For information about NAICS, see Economic Census Code Lists..Business Characteristics.For Wholesale Trade (42), data are presented by Type of Operation (All Establishments; Merchant Wholesalers, except Manufacturers' Sales Branches and Offices; and Manufacturers' Sales Branches and Offices)..Sampling.The 2022 Economic Census sample includes all active operating establishments of multi-establishment firms and approximately 1.7 million single-establishment firms, stratified by industry and state. Establishments selected to the sample receive a questionnaire. For some data on this table, estimates come only from the establishments selected into the sample. For more information about the sample design, see 2022 Economic Census Methodology..Confidentiality.The Census Bureau has reviewed this data product to ensure appropriate access, use, and disclosure avoidance protection of the confidential source data (Project No. 7504609, Disclosure Review Board (DRB) approval number: CBDRB-FY23-099).To protect confidentiality, the U.S. Census Bureau suppresses cell values to minimize the risk of identifying a particular business’ data or identity.To comply with disclosure avoidance guidelines, data rows with fewer than three contributing firms or three contributing establishments are not presented. Additionally, establishment counts are suppressed when other select statistics in the same row are suppressed. More information on disclosure avoidance is available in the 2022 Economic Census Methodology..Technical Documentation/Methodology.For detailed information about the methods used to collect data and produce statistics, survey questionnaires, Primary Business Activity/NAICS codes, NAPCS codes, and more, see Economic Census Technical Documentation..Weights.For some data on this table, estimates come only from the establishments selected into the sample. For these estimates, selected establishments have sampling weights equal to the inverse of their selection probability, generally between 1 and 40. There is further weighting to account for nonresponse and to ensure that detailed estimates sum to basic statistics where applicable. For more information on weighting, see 2022 Economic Census Methodology..Table Information.FTP Download.https://www2.census.gov/programs-surveys/economic-census/data/2022/sector42/.API Information.Economic census data are housed in the Census Bureau Application Programming Interface (API)..Symbols.D - Withheld to avoid disclosing data for individual companies; data are included in higher level totalsN - Not available or not comparableS - Estimate does not meet publication standards because of high sampling variability, poor response...

Census Data is collected every 10 years by mail surveys to every household with primary data collection fields of population, gender, race and number of occupants. Data includes demographics, education level, commute information, and more subset to Colorado by the Department of Local Affairs (DOLA).

Splitgraph serves as an HTTP API that lets you run SQL queries directly on this data to power Web applications. For example:

See the Splitgraph documentation for more information.

Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2020 Census blocks nest within every other 2020 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. Census 2020 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. Census tract boundaries generally follow visible and identifiable features. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas.This is a MD iMAP hosted service layer. Find more information at https://imap.maryland.gov.Feature Service Layer Link:https://mdgeodata.md.gov/imap/rest/services/Demographics/MD_CensusBoundaries/MapServer/0**Please note, due to the size of this dataset, you may receive an error message when trying to download the dataset. You can download this dataset directly from MD iMAP Services at: https://mdgeodata.md.gov/imap/rest/services/Demographics/MD_CensusBoundaries/MapServer/exts/MDiMAPDataDownload/customLayers/0**

Census Data is collected every 10 years by mail surveys to every household with primary data collection fields of population, gender, race and number of occupants. Data includes demographics, education level, commute information, and more subset to Colorado by the Department of Local Affairs (DOLA).

Splitgraph serves as an HTTP API that lets you run SQL queries directly on this data to power Web applications. For example:

See the Splitgraph documentation for more information.

Key Table Information.Table Title.Island Areas: Comparative Statistics by Manufacturing Industry for Puerto Rico: 2022 and 2017.Table ID.ISLANDAREASIND2022.IA2200IND12.Survey/Program.Economic Census of Island Areas.Year.2022.Dataset.ECNIA Economic Census of Island Areas.Source.U.S. Census Bureau, 2022 Economic Census of Island Areas, Core Statistics.Release Date.2024-12-19.Release Schedule.The Economic Census occurs every five years, in years ending in 2 and 7.2022 Economic Census of Island Areas tables are released on a flow basis from June through December 2024.For more information about economic census planned data product releases, see 2022 Economic Census Release Schedule..Dataset Universe. The dataset universe consists of all establishments that are in operation for at least some part of 2022, are located in Puerto Rico, have paid employees, and are classified in one of eighteen in-scope sectors defined by the 2022 NAICS..Sponsor.U.S. Department of Commerce.Methodology.Data Items and Other Identifying Records.Number of establishmentsAnnual payroll ($1,000)Number of employeesNumber of production workers, average for yearProduction workers hoursProduction workers wages ($1,000)Value added ($1,000)Total cost of supplies and/or materials ($1,000)Sales, value of shipments, or revenue ($1,000)Range indicating imputed percentage of total annual payrollRange indicating imputed percentage of total employeesRange indicating imputed percentage of total sales, value of shipments, or revenueDefinitions can be found by clicking on the column header in the table or by accessing the Economic Census Glossary..Unit(s) of Observation.The reporting units for the Economic Census of Island Areas are employer establishments. An establishment is generally a single physical location where business is conducted or where services or industrial operations are performed..Geography Coverage.The data are shown for employer establishments and firms that vary by industry:At the Territory level for Puerto RicoFor information about economic census geographies, including changes for 2022, see Economic Census: Economic Geographies..Industry Coverage.The data are shown for Puerto Rico at the 2- through 3-digit 2022 NAICS code levels for the manufacturing industry.For information about NAICS, see Economic Census Code Lists..Sampling.The Economic Census of Island Areas is a complete enumeration of establishments located in the islands (i.e., all establishments on the sampling frame are included in the sample). Therefore, the accuracy of tabulations is not affected by sampling error..Confidentiality.The Census Bureau has reviewed this data product to ensure appropriate access, use, and disclosure avoidance protection of the confidential source data (Project No. 7504609, Disclosure Review Board (DRB) approval number: CBDRB-FY24-0044).The primary method of disclosure avoidance protection is noise infusion. Under this method, the quantitative data values such as sales or payroll for each establishment are perturbed prior to tabulation by applying a random noise multiplier (i.e., factor). Each establishment is assigned a single noise factor, which is applied to all its quantitative data value. Using this method, most published cell totals are perturbed by at most a few percentage points.To comply with disclosure avoidance guidelines, data rows with fewer than three contributing establishments are not presented. For more information on disclosure avoidance, see Methodology for the 2022 Economic Census- Island Areas..Technical Documentation/Methodology.For detailed information about the methods used to collect data and produce statistics, see Methodology for the 2022 Economic Census- Island Areas.For more information about survey questionnaires, Primary Business Activity/NAICS codes, and NAPCS codes, see Economic Census Technical Documentation..Weights.Because the Economic Census of Island Areas is a complete enumeration, there is no sample weighting..Table Information.FTP Download.https://www2.census.gov/programs-surveys/economic-census/data/2022/sector00.API Information.Economic census data are housed in the Census Bureau Application Programming Interface (API)..Symbols.D - Withheld to avoid disclosing data for individual companies; data are included in higher level totalsN - Not available or not comparableS - Estimate does not meet publication standards because of high sampling variability, poor response quality, or other concerns about the estimate quality. Unpublished estimates derived from this table by subtraction are subject to these same limitations and should not be attributed to the U.S. Census Bureau. For a description of publication standards and the total quantity response rate, see link to program methodology page.X - Not applicableA - Relative standard error of 100% or morer - Reviseds - Relative standard error exceeds 40%For a complete list of symbols, see Economic Census Data Dictionary..Data-Specific Notes.Data users who crea...

Abstract

Background: Adolescent girls in Kenya are disproportionately affected by early and unintended pregnancies, unsafe abortion and HIV infection. The In Their Hands (ITH) programme in Kenya aims to increase adolescents' use of high-quality sexual and reproductive health (SRH) services through targeted interventions. ITH Programme aims to promote use of contraception and testing for sexually transmitted infections (STIs) including HIV or pregnancy, for sexually active adolescent girls, 2) provide information, products and services on the adolescent girl's terms; and 3) promote communities support for girls and boys to access SRH services.

Objectives: The objectives of the evaluation are to assess: a) to what extent and how the new Adolescent Reproductive Health (ARH) partnership model and integrated system of delivery is working to meet its intended objectives and the needs of adolescents; b) adolescent user experiences across key quality dimensions and outcomes; c) how ITH programme has influenced adolescent voice, decision-making autonomy, power dynamics and provider accountability; d) how community support for adolescent reproductive and sexual health initiatives has changed as a result of this programme.

Methodology ITH programme is being implemented in two phases, a formative planning and experimentation in the first year from April 2017 to March 2018, and a national roll out and implementation from April 2018 to March 2020. This second phase is informed by an Annual Programme Review and thorough benchmarking and assessment which informed critical changes to performance and capacity so that ITH is fit for scale. It is expected that ITH will cover approximately 250,000 adolescent girls aged 15-19 in Kenya by April 2020. The programme is implemented by a consortium of Marie Stopes Kenya (MSK), Well Told Story, and Triggerise. ITH's key implementation strategies seek to increase adolescent motivation for service use, create a user-defined ecosystem and platform to provide girls with a network of accessible subsidized and discreet SRH services; and launch and sustain a national discourse campaign around adolescent sexuality and rights. The 3-year study will employ a mixed-methods approach with multiple data sources including secondary data, and qualitative and quantitative primary data with various stakeholders to explore their perceptions and attitudes towards adolescents SRH services. Quantitative data analysis will be done using STATA to provide descriptive statistics and statistical associations / correlations on key variables. All qualitative data will be analyzed using NVIVO software.

Study Duration: 36 months - between 2018 and 2020.

Geographic coverage

Narok and Homabay counties

Analysis unit

Households

Universe

All adolescent girls aged 15-19 years resident in the household.

Sampling procedure

The sampling of adolescents for the household survey was based on expected changes in adolescent's intention to use contraception in future. According to the Kenya Demographic and Health Survey 2014, 23.8% of adolescents and young women reported not intending to use contraception in future. This was used as a baseline proportion for the intervention as it aimed to increase demand and reduce the proportion of sexually active adolescents who did not intend to use contraception in the future. Assuming that the project was to achieve an impact of at least 2.4 percentage points in the intervention counties (i.e. a reduction by 10%), a design effect of 1.5 and a non- response rate of 10%, a sample size of 1885 was estimated using Cochran's sample size formula for categorical data was adequate to detect this difference between baseline and end line time points. Based on data from the 2009 Kenya census, there were approximately 0.46 adolescents girls per a household, which meant that the study was to include approximately 4876 households from the two counties at both baseline and end line surveys.

We collected data among a representative sample of adolescent girls living in both urban and rural ITH areas to understand adolescents' access to information, use of SRH services and SRH-related decision making autonomy before the implementation of the intervention. Depending on the number of ITH health facilities in the two study counties, Homa Bay and Narok that, we sampled 3 sub-Counties in Homa Bay: West Kasipul, Ndhiwa and Kasipul; and 3 sub-Counties in Narok, Narok Town, Narok South and Narok East purposively. In each of the ITH intervention counties, there were sub-counties that had been prioritized for the project and our data collection focused on these sub-counties selected for intervention. A stratified sampling procedure was used to select wards with in the sub-counties and villages from the wards. Then households were selected from each village after all households in the villages were listed. The purposive selection of sub-counties closer to ITH intervention facilities meant that urban and semi-urban areas were oversampled due to the concentration of health facilities in urban areas.

Qualitative Sampling

Focus Group Discussion participants were recruited from the villages where the ITH adolescent household survey was conducted in both counties. A convenience sample of consenting adults living in the villages were invited to participate in the FGDS. The discussion was conducted in local languages. A facilitator and note-taker trained on how to use the focus group guide, how to facilitate the group to elicit the information sought, and how to take detailed notes. All focus group discussions took place in the local language and were tape-recorded, and the consent process included permission to tape-record the session. Participants were identified only by their first names and participants were asked not to share what was discussed outside of the focus group. Participants were read an informed consent form and asked to give written consent. In-depth interviews were conducted with purposively selected sample of consenting adolescent girls who participated in the adolescent survey. We conducted a total of 45 In-depth interviews with adolescent girls (20 in Homa Bay County and 25 in Narok County respectively). In addition, 8 FGDs (4 each per county) were conducted with mothers of adolescent girls who are usual residents of the villages which had been identified for the interviews and another 4 FGDs (2 each per county) with CHVs.

Sampling deviation

N/A

Mode of data collection

Face-to-face [f2f] for quantitative data collection and Focus Group Discussions and In Depth Interviews for qualitative data collection

Research instrument

The questionnaire covered; socio-demographic and household information, SRH knowledge and sources of information, sexual activity and relationships, family planning knowledge, access, choice and use when needed, exposure to family planning messages and voice and decision making autonomy and quality of care for those who visited health facilities in the 12 months before the survey. The questionnaire was piloted before the data collection and the questions reviewed for appropriateness, comprehension and flow. The questionnaire was piloted among a sample of 42 adolescent girls (two each per field interviewer) 15-19 from a community outside the study counties.

The questionnaire was originally developed in English and later translated into Kiswahili. The questionnaire was programmed using ODK-based Survey CTO platform for data collection and management and was administered through face-to-face interview.

Cleaning operations

The survey tools were programmed using the ODK-based SurveyCTO platform for data collection and management. During programming, consistency checks were in-built into the data capture software which ensured that there were no cases of missing or implausible information/values entered into the database by the field interviewers. For example, the application included controls for variables ranges, skip patterns, duplicated individuals, and intra- and inter-module consistency checks. This reduced or eliminated errors usually introduced at the data capture stage. Once programmed, the survey tools were tested by the programming team who in conjunction with the project team conducted further testing on the application's usability, in-built consistency checks (skips, variable ranges, duplicating individuals etc.), and inter-module consistency checks. Any issues raised were documented and tracked on the Issue Tracker and followed up to full and timely resolution. After internal testing was done, the tools were availed to the project and field teams to perform user acceptance testing (UAT) so as to verify and validate that the electronic platform worked exactly as expected, in terms of usability, questions design, checks and skips etc.

Data cleaning was performed to ensure that data were free of errors and that indicators generated from these data were accurate and consistent. This process begun on the first day of data collection as the first records were uploaded into the database. The data manager used data collected during pilot testing to begin writing scripts in Stata 14 to check the variables in the data in 'real-time'. This ensured the resolutions of any inconsistencies that could be addressed by the data collection teams during the fieldwork activities. The Stata 14 scripts that perform real-time checks and clean data also wrote to a .rtf file that detailed every check performed against each variable, any inconsistencies encountered, and all steps that were taken to address these inconsistencies. The .rtf files also reported when a variable was

Tags

   survey, environmental behaviors, lifestyle, status, PRIZM, Baltimore Ecosystem Study, LTER, BES




   Summary


   BES Research, Applications, and Education


   Description


   Geocoded for Baltimore County. The BES Household Survey 2003 is a telephone survey of metropolitan Baltimore residents consisting of 29 questions. The survey research firm, Hollander, Cohen, and McBride conducted the survey, asking respondents questions about their outdoor recreation activities, watershed knowledge, environmental behavior, neighborhood characteristics and quality of life, lawn maintenance, satisfaction with life, neighborhood, and the environment, and demographic information. The data from each respondent is also associated with a PRIZM� classification, census block group, and latitude-longitude. PRIZM� classifications categorize the American population using Census data, market research surveys, public opinion polls, and point-of-purchase receipts. The PRIZM� classification is spatially explicit allowing the survey data to be viewed and analyzed spatially and allowing specific neighborhood types to be identified and compared based on the survey data. The census block group and latitude-longitude data also allow us additional methods of presenting and analyzing the data spatially. 


   The household survey is part of the core data collection of the Baltimore Ecosystem Study to classify and characterize social and ecological dimensions of neighborhoods (patches) over time and across space. This survey is linked to other core data including US Census data, remotely-sensed data, and field data collection, including the BES DemSoc Field Observation Survey. 



   The BES 2003 telephone survey was conducted by Hollander, Cohen, and McBride from September 1-30, 2003. The sample was obtained from the professional sampling firm Claritas, in order that their "PRIZM" encoding would be appended to each piece of sample (telephone number) supplied. Mailing addresses were also obtained so that a postcard could be sent in advance of interviewers calling. The postcard briefly informed potential respondents about the survey, who was conducting it, and that they might receive a phone call in the next few weeks. A stratified sampling method was used to obtain between 50 - 150 respondents in each of the 15 main PRIZM classifications. This allows direct comparison of PRIZM classifications. Analysis of the data for the general metropolitan Baltimore area must be weighted to match the population proportions normally found in the region. They obtained a total of 9000 telephone numbers in the sample. All 9,000 numbers were dialed but contact was only made on 4,880. 1508 completed an interview, 2524 refused immediately, 147 broke off/incomplete, 84 respondents had moved and were no longer in the correct location, and a qualified respondent was not available on 617 calls. This resulted in a response rate of 36.1% compared with a response rate of 28.2% in 2000. The CATI software (Computer Assisted Terminal Interviewing) randomized the random sample supplied, and was programmed for at least 3 attempted callbacks per number, with emphasis on pulling available callback sample prior to accessing uncalled numbers. Calling was conducted only during evening and weekend hours, when most head of households are home. The use of CATI facilitated stratified sampling on PRIZM classifications, centralized data collection, standardized interviewer training, and reduced the overall cost of primary data collection. Additionally, to reduce respondent burden, the questionnaire was revised to be concise, easy to understand, minimize the use of open-ended responses, and require an average of 15 minutes to complete. 


   The household survey is part of the core data collection of the Baltimore Ecosystem Study to classify and characterize social and ecological dimensions of neighborhoods (patches) over time and across space. This survey is linked to other core data, including US Census data, remotely-sensed data, and field data collection, including the BES DemSoc Field Observation Survey. 


   Additional documentation of this database is attached to this metadata and includes 4 documents, 1) the telephone survey, 2) documentation of the telephone survey, 3) metadata for the telephone survey, and 4) a description of the attribute data in the BES survey 2003 survey.


   This database was created by joining the GDT geographic database of US Census Block Group geographies for the Baltimore Metropolitan Statisticsal Area (MSA), with the Claritas PRIZM database, 2003, of unique classifications of each Census Block Group, and the unique PRIZM code for each respondent from the BES Household Telephone Survey, 2003. The GDT database is preferred and used because

The Annual Social and Economic Supplement or March CPS supplement is the primary source of detailed information on income and work experience in the United States. Numerous publications based on this survey are issued each year by the Bureaus of Labor Statistics and Census. A public-use microdata file is available for private researchers, who also produce many academic and policy-related documents based on these data. The Annual Social and Economic Supplement is used to generate the annual Population Profile of the United States, reports on geographical mobility and educational attainment, and detailed analysis of money income and poverty status. The labor force and work experience data from this survey are used to profile the U.S. labor market and to make employment projections. To allow for the same type of in-depth analysis of hispanics, additional hispanic sample units are added to the basic CPS sample in March each year. Additional weighting is also performed so that estimates can be made for households and families, in addition to persons.

Abstract

The primary objective of the 2006 DHS is to provide to the Department of Health (DOH), Department of National Planning and Monitoring (DNPM) and other relevant institutions and users with updated and reliable data on infant and child mortality, fertility preferences, family planning behavior, maternal mortality, utilization of maternal and child health services, knowledge of HIV/AIDS and behavior, sexually risk behavior and information on the general household amenities. This information contributes to policy planning, monitoring, and program evaluation for development at all levels of government particularly at the national and provincial levels. The information will also be used to assess the performance of government development interventions aimed at addressing the targets set out under the MDG and MTDS. The long-term objective of the survey is to technically strengthen the capacity of the NSO in conducting and analyzing the results of future surveys.

The successful conduct and completion of this survey is a result of the combined effort of individuals and institutions particularly in their participation and cooperation in the Users Advisory Committee (UAC) and the National Steering Committee (NSC) in the different phases of the survey.

The survey was conducted by the Population and Social Statistics Division of the National Statistical Office of PNG. The 2006 DHS was jointly funded by the Government of PNG and Donor Partners through ADB while technical assistance was provided by International Consultants and NSO Philippines.

Geographic coverage

National level Regional level Urban and Rural

Analysis unit

• Households
• Individuals

Universe

The survey covered all de jure household members (usual residents), all women and men aged 15-50 years resident in the household.

Kind of data

Sample survey data [ssd]

Sampling procedure

The primary focus of the 2006 DHS is to provide estimates of key population and health indicators at the national level. A secondary but important priority is to also provide estimates at the regional level, and for urban and rural areas respectively. The 2006 DHS employed the same survey methodology used in the 1996 DHS. The 2006 DHS sample was a two stage self-weighting systematic cluster sample of regions with the first stage being at the census unit level and the second stage at the household level. The 2000 Census frame comprised of a list of census units was used to select the sample of 10,000 households for the 2006 DHS.

A total of 667 clusters were selected from the four regions. All census units were listed in a geographic order within their districts, and districts within each province and the sample was selected accordingly through the use of appropriate sampling fraction. The distribution of households according to urban-rural sectors was as follows:

8,000 households were allocated to the rural areas of PNG. The proportional allocation was used to allocate the first 4,000 households to regions based on projected citizen household population in 2006. The other 4,000 households were allocated equally across all four regions to ensure that each region have sufficient sample for regional level analysis.

2,000 households were allocated to the urban areas of PNG using proportional allocation based on the 2006 projected urban citizen population. This allocation was to ensure that the most accurate estimates for urban areas are obtained at the national level.

All households in the selected census units were listed in a separate field operation from June to July 2006. From the list of households, 16 households were selected in the rural census units and 12 in the urban census units using systematic sampling. All women and men age 15-50 years who were either usual residents of the selected households or visitors present in the household on the night before the survey were eligible to be interviewed. Further information on the survey design is contained in Appendix A of the survey report.

Mode of data collection

Face-to-face [f2f]

Research instrument

Three questionnaires were used in the 2006 DHS namely; the Household Questionnaire (HHQ), the Female Individual Questionnaire (FIQ) and the Male Individual Questionnaire (MIQ). The planning and development of these questionnaires involved close consultation with the UAC members comprising of the following line departments and agencies namely; Department of Health (DOH), Department of Education (DOE), Department of National Planning and Monitoring (DNPM), National Aids Council Secretariat (NACS), Department of Agriculture and Livestock (DAL), Department of Labour and Employment (DLE), University of Papua New Guinea (UPNG), National Research Institute (NRI) and representatives from Development partners.

The HHQ was designed to collect background information for all members of the selected households. This information was used to identify eligible female and male respondents for the respective individual questionnaires. Additional information on household amenities and services, and malaria prevention was also collected.

The FIQ contains questions on respondents background, including marriage and polygyny; birth history, maternal and child health, knowledge and use of contraception, fertility preferences, HIV/AIDS including new modules on sexual risk behaviour and attitudes to issues of well being. All females age 15-50 years identified from the HHQ were eligible for interview using this questionnaire.

The MIQ collected almost the same information as in the FIQ except for birth history. All males age 15-50 years identified from the HHQ were eligible to be interviewed using the MIQ.

Two pre-tests were carried out aimed at testing the flow of the existing and new questions and the administering of the MIQ between March and April 2006. The final questionnaires contained all the modules used in the 1996 DHS including new modules on malaria prevention, sexual risk behaviour and attitudes to issues of well being.

Cleaning operations

All questionnaires from the field were sent to the NSO headquarters in Port Moresby in February 2007 for editing and coding, data entry and data cleaning. Editing was done in 3 stages to enable the creation of clean data files for each province from which the tabulations were generated. Data entry and processing were done using the CSPro software and was completed by October 2008.

Response rate

Table A.2 of the survey report provides a summary of the sample implementation of the 2006 DHS. Despite the recency of the household listing, approximately 7 per cent of households could not be contacted due to prolonged absence or because their dwellings were vacant or had been destroyed. Among the households contacted, a response rate of 97 per cent was achieved. Within the 9,017 households successfully interviewed, a total of 11, 456 women and 11, 463 of men age 15-49 years were eligible to be interviewed. Successful interviews were conducted with 90 per cent of eligible women (10, 353) and 88 per cent of eligible men (10,077). The most common cause of non-response was absence (5 per cent). Among the regions, the rate of success among women was highest in all the regions (92 per cent each) except for Momase region at 86 per cent. The rate of success among men was highest in Highlands and Islands region and lowest in Momase region. The overall response rate, calculated as the product of the household and female individual response rate (.97*.90) was 87 per cent.

Sampling error estimates

Appendix B of the survey report describes the general procedure in the computation of sampling errors of the sample survey estimates generated. It basically follows the procedure adopted in most Demographic and Health Surveys.

Data appraisal

Appendix C explains to the data users the quality of the 2006 DHS. Non-sampling errors are those that occur in surveys and censuses through the following causes: a) Failure to locate the selected household b) Mistakes in the way questions were asked c) Misunderstanding by the interviewer or respondent d) Coding errors e) Data entry errors, etc.

Total eradication of non-sampling errors is impossible however great measures were taken to minimize them as much as possible. These measures included: a) Careful questionnaire design b) Pretesting of survey instruments to guarantee their functionality c) A month of interviewers’ and supervisors’ training d) Careful fieldwork supervision including field visits by NSOHQ personnel e) A swift data processing prior to data entry f ) The use of interactive data entry software to minimize errors

The Squirrel Census (https://www.thesquirrelcensus.com/) is a multimedia science, design, and storytelling project focusing on the Eastern gray (Sciurus carolinensis). They count squirrels and present their findings to the public. This table contains squirrel data for each of the 3,023 sightings, including location coordinates, age, primary and secondary fur color, elevation, activities, communications, and interactions between squirrels and with humans.

Vintage of boundaries and attributes: 2020, 2021Geography: BlockCoverage: Cuyahoga CountyDemographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)LEHD Data: Area Profile for Private Primary JobsData downloaded from: U.S. Census Bureau’s data.census.gov and OnTheMap sitesDate the Data was Downloaded: April 1, 2024This layer contains the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics information about total population counts by sex, age, and race groups, as well as 2021 Longitudinal Employer-Household Dynamics (LEHD) at the Block level for Cuyahoga County, Ohio.To see the full list of attributes available in this service, go to the "Data" tab above, and then choose "Fields" at the top right. Each attribute contains definitions, additional details, and the formula for calculated fields in the field description.This web layer can be used in a variety of planning and decision-making applications, including transportation planning, land use analysis, economic development, and social policy analysis. It provides valuable insights into the demographic, economic, and housing characteristics of Cuyahoga County, Ohio, which can inform planning and policy decisions at the local, regional, and state levels.Data Processing Notes: Census blocks with no population that occur in areas of water, such as oceans, are removed from this data service.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.