This map shows population density of the United States. Areas in darker magenta have much higher population per square mile than areas in orange or yellow. Data is from the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics. The map's layers contain total population counts by sex, age, and race groups for Nation, State, County, Census Tract, and Block Group in the United States and Puerto Rico. From the Census:"Population density allows for broad comparison of settlement intensity across geographic areas. In the U.S., population density is typically expressed as the number of people per square mile of land area. The U.S. value is calculated by dividing the total U.S. population (316 million in 2013) by the total U.S. land area (3.5 million square miles).When comparing population density values for different geographic areas, then, it is helpful to keep in mind that the values are most useful for small areas, such as neighborhoods. For larger areas (especially at the state or country scale), overall population density values are less likely to provide a meaningful measure of the density levels at which people actually live, but can be useful for comparing settlement intensity across geographies of similar scale." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

This dataset shows census data for Nigeria from government data sources and the World Bank data portal.

The Decennial Census provides population estimates and demographic information on residents of the United States.

The Census Summary Files contain detailed tables on responses to the decennial census. Data tables in Summary File 1 provide information on population and housing characteristics, including cross-tabulations of age, sex, households, families, relationship to householder, housing units, detailed race and Hispanic or Latino origin groups, and group quarters for the total population. Summary File 2 contains data tables on population and housing characteristics as reported by housing unit.

Researchers at NYU Langone Health can find guidance for the use and analysis of Census Bureau data on the Population Health Data Hub (listed under "Other Resources"), which is accessible only through the intranet portal with a valid Kerberos ID (KID).

About this dataset

Context

The dataset tabulates the Excel population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Excel. The dataset can be utilized to understand the population distribution of Excel by age. For example, using this dataset, we can identify the largest age group in Excel.

Key observations

The largest age group in Excel, AL was for the group of age 45 to 49 years years with a population of 74 (15.64%), according to the ACS 2018-2022 5-Year Estimates. At the same time, the smallest age group in Excel, AL was the 85 years and over years with a population of 2 (0.42%). Source: U.S. Census Bureau American Community Survey (ACS) 2018-2022 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2018-2022 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Excel is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Excel total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Excel Population by Age. You can refer the same here

The Census Designated Places 2020 (CDP 2020) boundary usually is defined by the Census Bureau in cooperation with state, local or tribal officials. The boundaries are updated prior to each decennial census. These boundaries, which usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity boundary, have no legal status, nor do these places have officials elected to serve traditional municipal functions. CDP boundaries may change from one decennial census to the next with changes in the settlement pattern; a CDP with the same name as in an earlier census does not necessarily have the same boundary. CDPs must be contained within a single state and may not extend into an incorporated place. There are no population size requirements for CDPs. incorporatedCDP data is download from Census Bureau's TIGER 2020 website (https://www2.census.gov/geo/tiger/TIGER2020/PLACE/) and extracted for Los Angeles County. This data includes LA County 88 incorporated cities and 54 CDPs.

This layer contains census tract level 2020 Decennial Census redistricting data as reported by the U.S. Census Bureau for all states plus DC and Puerto Rico. The attributes come from the 2020 Public Law 94-171 (P.L. 94-171) tables.Data download date: August 12, 2021Census tables: P1, P2, P3, P4, H1, P5, HeaderDownloaded from: Census FTP siteProcessing Notes:Data was downloaded from the U.S. Census Bureau FTP site, imported into SAS format and joined to the 2020 TIGER boundaries. Boundaries are sourced from the 2020 TIGER/Line Geodatabases. Boundaries have been projected into Web Mercator and each attribute has been given a clear descriptive alias name. No alterations have been made to the vertices of the data.Each attribute maintains it's specified name from Census, but also has a descriptive alias name and long description derived from the technical documentation provided by the Census. For a detailed list of the attributes contained in this layer, view the Data tab and select "Fields". The following alterations have been made to the tabular data:Joined all tables to create one wide attribute table:P1 - RaceP2 - Hispanic or Latino, and not Hispanic or Latino by RaceP3 - Race for the Population 18 Years and OverP4 - Hispanic or Latino, and not Hispanic or Latino by Race for the Population 18 Years and OverH1 - Occupancy Status (Housing)P5 - Group Quarters Population by Group Quarters Type (correctional institutions, juvenile facilities, nursing facilities/skilled nursing, college/university student housing, military quarters, etc.)HeaderAfter joining, dropped fields: FILEID, STUSAB, CHARITER, CIFSN, LOGRECNO, GEOVAR, GEOCOMP, LSADC, BLOCK, BLKGRP, and TBLKGRP.GEOCOMP was renamed to GEOID and moved be the first column in the table, the original GEOID was dropped.Placeholder fields for future legislative districts have been dropped: CD118, CD119, CD120, CD121, SLDU22, SLDU24, SLDU26, SLDU28, SLDL22, SLDL24 SLDL26, SLDL28.P0020001 was dropped, as it is duplicative of P0010001. Similarly, P0040001 was dropped, as it is duplicative of P0030001.In addition to calculated fields, County_Name and State_Name were added.The following calculated fields have been added (see long field descriptions in the Data tab for formulas used): PCT_P0030001: Percent of Population 18 Years and OverPCT_P0020002: Percent Hispanic or LatinoPCT_P0020005: Percent White alone, not Hispanic or LatinoPCT_P0020006: Percent Black or African American alone, not Hispanic or LatinoPCT_P0020007: Percent American Indian and Alaska Native alone, not Hispanic or LatinoPCT_P0020008: Percent Asian alone, Not Hispanic or LatinoPCT_P0020009: Percent Native Hawaiian and Other Pacific Islander alone, not Hispanic or LatinoPCT_P0020010: Percent Some Other Race alone, not Hispanic or LatinoPCT_P0020011: Percent Population of Two or More Races, not Hispanic or LatinoPCT_H0010002: Percent of Housing Units that are OccupiedPCT_H0010003: Percent of Housing Units that are VacantPlease note these percentages might look strange at the individual tract level, since this data has been protected using differential privacy.**To protect the privacy and confidentiality of respondents, data has been protected using differential privacy techniques by the U.S. Census Bureau. This means that some individual tracts will have values that are inconsistent or improbable. However, when aggregated up, these issues become minimized. The pop-up on this layer uses Arcade to display aggregated values for the surrounding area rather than values for the tract itself.Download Census redistricting data in this layer as a file geodatabase.Additional links:U.S. Census BureauU.S. Census Bureau Decennial CensusAbout the 2020 Census2020 Census2020 Census data qualityDecennial Census P.L. 94-171 Redistricting Data Program

The Bureau of the Census has released Census 2000 Summary File 1 (SF1) 100-Percent data. The file includes the following population items: sex, age, race, Hispanic or Latino origin, household relationship, and household and family characteristics. Housing items include occupancy status and tenure (whether the unit is owner or renter occupied). SF1 does not include information on incomes, poverty status, overcrowded housing or age of housing. These topics will be covered in Summary File 3. Data are available for states, counties, county subdivisions, places, census tracts, block groups, and, where applicable, American Indian and Alaskan Native Areas and Hawaiian Home Lands. The SF1 data are available on the Bureau's web site and may be retrieved from American FactFinder as tables, lists, or maps. Users may also download a set of compressed ASCII files for each state via the Bureau's FTP server. There are over 8000 data items available for each geographic area. The full listing of these data items is available here as a downloadable compressed data base file named TABLES.ZIP. The uncompressed is in FoxPro data base file (dbf) format and may be imported to ACCESS, EXCEL, and other software formats. While all of this information is useful, the Office of Community Planning and Development has downloaded selected information for all states and areas and is making this information available on the CPD web pages. The tables and data items selected are those items used in the CDBG and HOME allocation formulas plus topics most pertinent to the Comprehensive Housing Affordability Strategy (CHAS), the Consolidated Plan, and similar overall economic and community development plans. The information is contained in five compressed (zipped) dbf tables for each state. When uncompressed the tables are ready for use with FoxPro and they can be imported into ACCESS, EXCEL, and other spreadsheet, GIS and database software. The data are at the block group summary level. The first two characters of the file name are the state abbreviation. The next two letters are BG for block group. Each record is labeled with the code and name of the city and county in which it is located so that the data can be summarized to higher-level geography. The last part of the file name describes the contents . The GEO file contains standard Census Bureau geographic identifiers for each block group, such as the metropolitan area code and congressional district code. The only data included in this table is total population and total housing units. POP1 and POP2 contain selected population variables and selected housing items are in the HU file. The MA05 table data is only for use by State CDBG grantees for the reporting of the racial composition of beneficiaries of Area Benefit activities. The complete package for a state consists of the dictionary file named TABLES, and the five data files for the state. The logical record number (LOGRECNO) links the records across tables.

About this dataset

Context

The dataset tabulates the North Star population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for North Star. The dataset can be utilized to understand the population distribution of North Star by age. For example, using this dataset, we can identify the largest age group in North Star.

Key observations

The largest age group in North Star, OH was for the group of age Under 5 years years with a population of 32 (17.02%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in North Star, OH was the 40 to 44 years years with a population of 3 (1.60%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the North Star is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of North Star total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for North Star Population by Age. You can refer the same here

This layer contains a Vermont-only subset of census tract level 2020 Decennial Census redistricting data as reported by the U.S. Census Bureau for all states plus DC and Puerto Rico. The attributes come from the 2020 Public Law 94-171 (P.L. 94-171) tables.Data download date: August 12, 2021Census tables: P1, P2, P3, P4, H1, P5, HeaderDownloaded from: Census FTP siteProcessing Notes:Data was downloaded from the U.S. Census Bureau FTP site, imported into SAS format and joined to the 2020 TIGER boundaries. Boundaries are sourced from the 2020 TIGER/Line Geodatabases. Boundaries have been projected into Web Mercator and each attribute has been given a clear descriptive alias name. No alterations have been made to the vertices of the data.Each attribute maintains it's specified name from Census, but also has a descriptive alias name and long description derived from the technical documentation provided by the Census. For a detailed list of the attributes contained in this layer, view the Data tab and select "Fields". The following alterations have been made to the tabular data:Joined all tables to create one wide attribute table:P1 - RaceP2 - Hispanic or Latino, and not Hispanic or Latino by RaceP3 - Race for the Population 18 Years and OverP4 - Hispanic or Latino, and not Hispanic or Latino by Race for the Population 18 Years and OverH1 - Occupancy Status (Housing)P5 - Group Quarters Population by Group Quarters Type (correctional institutions, juvenile facilities, nursing facilities/skilled nursing, college/university student housing, military quarters, etc.)HeaderAfter joining, dropped fields: FILEID, STUSAB, CHARITER, CIFSN, LOGRECNO, GEOVAR, GEOCOMP, LSADC, BLOCK, BLKGRP, and TBLKGRP.GEOCOMP was renamed to GEOID and moved be the first column in the table, the original GEOID was dropped.Placeholder fields for future legislative districts have been dropped: CD118, CD119, CD120, CD121, SLDU22, SLDU24, SLDU26, SLDU28, SLDL22, SLDL24 SLDL26, SLDL28.P0020001 was dropped, as it is duplicative of P0010001. Similarly, P0040001 was dropped, as it is duplicative of P0030001.In addition to calculated fields, County_Name and State_Name were added.The following calculated fields have been added (see long field descriptions in the Data tab for formulas used): PCT_P0030001: Percent of Population 18 Years and OverPCT_P0020002: Percent Hispanic or LatinoPCT_P0020005: Percent White alone, not Hispanic or LatinoPCT_P0020006: Percent Black or African American alone, not Hispanic or LatinoPCT_P0020007: Percent American Indian and Alaska Native alone, not Hispanic or LatinoPCT_P0020008: Percent Asian alone, Not Hispanic or LatinoPCT_P0020009: Percent Native Hawaiian and Other Pacific Islander alone, not Hispanic or LatinoPCT_P0020010: Percent Some Other Race alone, not Hispanic or LatinoPCT_P0020011: Percent Population of Two or More Races, not Hispanic or LatinoPCT_H0010002: Percent of Housing Units that are OccupiedPCT_H0010003: Percent of Housing Units that are VacantPlease note these percentages might look strange at the individual tract level, since this data has been protected using differential privacy.*VCGI exported a Vermont-only subset of the nation-wide layer to produce this layer--with fields limited to this popular subset: OBJECTID: OBJECTID GEOID: Geographic Record Identifier NAME: Area Name-Legal/Statistical Area Description (LSAD) Term-Part Indicator County_Name: County Name State_Name: State Name P0010001: Total Population P0010003: Population of one race: White alone P0010004: Population of one race: Black or African American alone P0010005: Population of one race: American Indian and Alaska Native alone P0010006: Population of one race: Asian alone P0010007: Population of one race: Native Hawaiian and Other Pacific Islander alone P0010008: Population of one race: Some Other Race alone P0020002: Hispanic or Latino Population P0020003: Non-Hispanic or Latino Population P0030001: Total population 18 years and over H0010001: Total housing units H0010002: Total occupied housing units H0010003: Total vacant housing units P0050001: Total group quarters population PCT_P0030001: Percent of Population 18 Years and Over PCT_P0020002: Percent Hispanic or Latino PCT_P0020005: Percent White alone, not Hispanic or Latino PCT_P0020006: Percent Black or African American alone, not Hispanic or Latino PCT_P0020007: Percent American Indian and Alaska Native alone, not Hispanic or Latino PCT_P0020008: Percent Asian alone, not Hispanic or Latino PCT_P0020009: Percent Native Hawaiian and Other Pacific Islander alone, not Hispanic or Latino PCT_P0020010: Percent Some Other Race alone, not Hispanic or Latino PCT_P0020011: Percent Population of two or more races, not Hispanic or Latino PCT_H0010002: Percent of Housing Units that are Occupied PCT_H0010003: Percent of Housing Units that are Vacant SUMLEV: Summary Level REGION: Region DIVISION: Division COUNTY: County (FIPS) COUNTYNS: County (NS) TRACT: Census Tract AREALAND: Area (Land) AREAWATR: Area (Water) INTPTLON: Internal Point (Longitude) INTPTLAT: Internal Point (Latitude) BASENAME: Area Base Name POP100: Total Population Count HU100: Total Housing Count *To protect the privacy and confidentiality of respondents, data has been protected using differential privacy techniques by the U.S. Census Bureau. This means that some individual tracts will have values that are inconsistent or improbable. However, when aggregated up, these issues become minimized. Download Census redistricting data in this layer as a file geodatabase.Additional links:U.S. Census BureauU.S. Census Bureau Decennial CensusAbout the 2020 Census2020 Census2020 Census data qualityDecennial Census P.L. 94-171 Redistricting Data Program

TIGER/Line Shapefiles contain current geographic extent and boundaries of both legal and statistical entities (which have no governmental standing) for the United States, the District of Columbia, Puerto Rico, and the Island areas. Feature shapefiles represent the point, line, and polygon features in the MTDB (e.g., roads and rivers). Relationship files contain additional attribute information users can join to the shapefiles. Both the feature shapefiles and relationship files reflect updates made in the database. To see how the geographic entities, relate to one another, please see our geographic hierarchy diagrams here:https://www.census.gov/programs-surveys/geography/guidance/hierarchy.html

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. ZIP Code Tabulation Areas (ZCTAs) are approximate area representations of U.S. Postal Service (USPS) ZIP Code service areas that the Census Bureau creates to present statistical data for each decennial census. The Census Bureau delineates ZCTA boundaries for the United States, Puerto Rico, American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands once each decade following the decennial census. Data users should not use ZCTAs to identify the official USPS ZIP Code for mail delivery. The USPS makes periodic changes to ZIP Codes to support more efficient mail delivery. The Census Bureau uses tabulation blocks as the basis for defining each ZCTA. Tabulation blocks are assigned to a ZCTA based on the most frequently occurring ZIP Code for the addresses contained within that block. The most frequently occurring ZIP Code also becomes the five-digit numeric code of the ZCTA. These codes may contain leading zeros. Blocks that do not contain addresses but are surrounded by a single ZCTA (enclaves) are assigned to the surrounding ZCTA. Because the Census Bureau only uses the most frequently occurring ZIP Code to assign blocks, a ZCTA may not exist for every USPS ZIP Code. Some ZIP Codes may not have a matching ZCTA because too few addresses were associated with the specific ZIP Code or the ZIP Code was not the most frequently occurring ZIP Code within any of the blocks where it exists. The ZCTA boundaries in this release are those delineated following the 2010 Census.

The 2010 Census Production Settings Redistricting Data (P.L. 94-171) Demonstration Noisy Measurement Files are an intermediate output of the 2020 Census Disclosure Avoidance System (DAS) TopDown Algorithm (TDA) (as described in Abowd, J. et al [2022], and implemented in https://github.com/uscensusbureau/DAS_2020_Redistricting_Production_Code). The NMF was produced using the official "production settings," the final set of algorithmic parameters and privacy-loss budget allocations that were used to produce the 2020 Census Redistricting Data (P.L. 94-171) Summary File and the 2020 Census Demographic and Housing Characteristics File. The NMF consists of the full set of privacy-protected statistical queries (counts of individuals or housing units with particular combinations of characteristics) of confidential 2010 Census data relating to the redistricting data portion of the 2010 Demonstration Data Products Suite - Redistricting and Demographic and Housing Characteristics File - Production Settings (2023-04-03). These statistical queries, called "noisy measurements" were produced under the zero-Concentrated Differential Privacy framework (Bun, M. and Steinke, T [2016]; see also Dwork C. and Roth, A. [2014]) implemented via the discrete Gaussian mechanism (Cannone C., et al., [2023]), which added positive or negative integer-valued noise to each of the resulting counts. The noisy measurements are an intermediate stage of the TDA prior to the post-processing the TDA then performs to ensure internal and hierarchical consistency within the resulting tables. The Census Bureau has released these 2010 Census demonstration data to enable data users to evaluate the expected impact of disclosure avoidance variability on 2020 Census data. The 2010 Census Production Settings Redistricting Data (P.L. 94-171) Demonstration Noisy Measurement Files (2023-04-03) have been cleared for public dissemination by the Census Bureau Disclosure Review Board (CBDRB-FY22-DSEP-004). The data include zero-Concentrated Differentially Private (zCDP) (Bun, M. and Steinke, T [2016]) noisy measurements, implemented via the discrete Gaussian mechanism. These are estimated counts of individuals and housing units included in the 2010 Census Edited File (CEF), which includes confidential data initially collected in the 2010 Census of Population and Housing. The noisy measurements included in this file were subsequently post-processed by the TopDown Algorithm (TDA) to produce the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) (https://www2.census.gov/programs-surveys/decennial/2020/program-management/data-product- planning/2010-demonstration-data-products/04 Demonstration_Data_Products_Suite/2023-04-03/). As these 2010 Census demonstration data are intended to support study of the design and expected impacts of the 2020 Disclosure Avoidance System, the 2010 CEF records were pre-processed before application of the zCDP framework. This pre-processing converted the 2010 CEF records into the input-file format, response codes, and tabulation categories used for the 2020 Census, which differ in substantive ways from the format, response codes, and tabulation categories originally used for the 2010 Census. The NMF provides estimates of counts of persons in the CEF by various characteristics and combinations of characteristics, including their reported race and ethnicity, whether they were of voting age, whether they resided in a housing unit or one of 7 group quarters types, and their census block of residence, after the addition of discrete Gaussian noise (with the scale parameter determined by the privacy-loss budget allocation for that particular query under zCDP). Noisy measurements of the counts of occupied and vacant housing units by census block are also included. Lastly, data on constraints--information into which no noise was infused by the Disclosure Avoidance System (DAS) and used by the TDA to post-process the noisy measurements into the 2010 Census Production Settings Privacy-Protected Microdata File - Redistricting (P.L. 94-171) and Demographic and Housing Characteristics File (2023-04-03) --are provided. These data are available for download (i.e. not restricted access). Due to their size, they must be downloaded through the link on this

This feature layer contains census tracts for the San Francisco Bay Region for Census 2000. The features were extracted from a statewide data set downloaded from the United States Census Bureau by Metropolitan Transportation Commission staff.The purpose of this feature layer is for the production of feature sets for public access and download to avoid licensing issues related to the agency's base data.Source data downloaded from https://www.census.gov/geographies/mapping-files/time-series/geo/tiger-line-file.html_The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the United States Census Bureau's Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation.Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the Census 2000 Participant Statistical Areas Program (PSAP). The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,500 and 8,000 people, with an optimum size of 4,000 people.When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, etc. may require boundary revisions before a census. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries are always census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous.

About this dataset

Context

The dataset tabulates the Downers Grove population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Downers Grove. The dataset can be utilized to understand the population distribution of Downers Grove by age. For example, using this dataset, we can identify the largest age group in Downers Grove.

Key observations

The largest age group in Downers Grove, IL was for the group of age 50 to 54 years years with a population of 3,646 (7.31%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Downers Grove, IL was the 80 to 84 years years with a population of 996 (2%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Downers Grove is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Downers Grove total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Downers Grove Population by Age. You can refer the same here

About this dataset

Context

The dataset tabulates the Forest Grove population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Forest Grove. The dataset can be utilized to understand the population distribution of Forest Grove by age. For example, using this dataset, we can identify the largest age group in Forest Grove.

Key observations

The largest age group in Forest Grove, OR was for the group of age 15 to 19 years years with a population of 2,413 (9.14%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Forest Grove, OR was the 80 to 84 years years with a population of 484 (1.83%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Forest Grove is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Forest Grove total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Forest Grove Population by Age. You can refer the same here

About this dataset

Context

The dataset tabulates the Marco Island population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Marco Island. The dataset can be utilized to understand the population distribution of Marco Island by age. For example, using this dataset, we can identify the largest age group in Marco Island.

Key observations

The largest age group in Marco Island, FL was for the group of age 75 to 79 years years with a population of 2,674 (16.71%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Marco Island, FL was the 15 to 19 years years with a population of 123 (0.77%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Marco Island is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Marco Island total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Marco Island Population by Age. You can refer the same here

About this dataset

Context

The dataset tabulates the Lauderdale-By-The-Sea population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Lauderdale-By-The-Sea. The dataset can be utilized to understand the population distribution of Lauderdale-By-The-Sea by age. For example, using this dataset, we can identify the largest age group in Lauderdale-By-The-Sea.

Key observations

The largest age group in Lauderdale-By-The-Sea, FL was for the group of age 75 to 79 years years with a population of 652 (10.59%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Lauderdale-By-The-Sea, FL was the Under 5 years years with a population of 69 (1.12%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Lauderdale-By-The-Sea is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Lauderdale-By-The-Sea total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Lauderdale-By-The-Sea Population by Age. You can refer the same here

About this dataset

Context

The dataset tabulates the Banks population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Banks. The dataset can be utilized to understand the population distribution of Banks by age. For example, using this dataset, we can identify the largest age group in Banks.

Key observations

The largest age group in Banks, OR was for the group of age 35-39 years with a population of 217 (10.43%), according to the 2021 American Community Survey. At the same time, the smallest age group in Banks, OR was the 80-84 years with a population of 0 (0.00%). Source: U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Banks is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Banks total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Banks Population by Age. You can refer the same here

About this dataset

Context

The dataset tabulates the Forty Fort population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Forty Fort. The dataset can be utilized to understand the population distribution of Forty Fort by age. For example, using this dataset, we can identify the largest age group in Forty Fort.

Key observations

The largest age group in Forty Fort, PA was for the group of age 40-44 years with a population of 452 (10.73%), according to the 2021 American Community Survey. At the same time, the smallest age group in Forty Fort, PA was the 85+ years with a population of 30 (0.71%). Source: U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Forty Fort is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Forty Fort total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Forty Fort Population by Age. You can refer the same here

About this dataset

Context

The dataset tabulates the St. Anne population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for St. Anne. The dataset can be utilized to understand the population distribution of St. Anne by age. For example, using this dataset, we can identify the largest age group in St. Anne.

Key observations

The largest age group in St. Anne, IL was for the group of age 40 to 44 years years with a population of 123 (11.50%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in St. Anne, IL was the 85 years and over years with a population of 9 (0.84%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the St. Anne is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of St. Anne total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for St. Anne Population by Age. You can refer the same here