Every 10 years, the number of seats a state has in the U.S. House of Representatives, and therefore the Electoral College, changes based on population. While many states experienced no change in representation due to the 2020 Census, a few states gained or lost seats. Texas notably gained two seats due to an increase in population, while New York, Michigan, California, West Virginia, Pennsylvania, Ohio, and Illinois all lost one seat.

This change will stay in place until 2030, when the next Census is conducted in the United States.

This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 118th Congress is seated from January 2023 through December 2024. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The TIGER/Line shapefiles for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts reflect information provided to the Census Bureau by the states by August 31, 2022.

There are 435 seats in the U.S. House of Representatives, of which 52 are allocated to the state of California. Seats in the House are allocated based on the population of each state. To ensure proportional and dynamic representation, congressional apportionment is reevaluated every 10 years based on census population data. After the 2020 census, six states gained a seat - Colorado, Florida, Montana, North Carolina, and Oregon. The states of California, Illinois, Michigan, New York, Ohio, Pennsylvania, and West Virginia lost a seat.

Congressional districts are the 444 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable.The 119th Congress is seated from January 2023 through December 2024. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the congressional districts to cover all of the state or state equivalent area. In these areas with no congressional districts defined, the code "ZZ" has been assigned, which is treated as a single congressional district for purposes of data presentation. The TIGER/Line data for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts reflect information provided to the Census Bureau by the states by August 31, 2022.Download: https://www2.census.gov/geo/tiger/TGRGDB24/tlgdb_2024_a_us_legislative.gdb.zip Layer: Congressional_DistrictsMetadata: https://meta.geo.census.gov/data/existing/decennial/GEO/GPMB/TIGERline/Current_19115/series_tl_2023_cd118.shp.iso.xml

Us House Congressional Representatives serving Macon-Bibb County.

Congressional districts are the 435 areas from which members are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states, which is based on decennial census population counts, each state with multiple seats is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The boundaries and numbers shown for the congressional districts are those specified in the state laws or court orders establishing the districts within each state.

Congressional districts for the 108th through 112th sessions were established by the states based on the result of the 2000 Census. Congressional districts for the 113th through 115th sessions were established by the states based on the result of the 2010 Census. Boundaries are effective until January of odd number years (for example, January 2015, January 2017, etc.), unless a state initiative or court ordered redistricting requires a change. All states established new congressional districts in 2011-2012, with the exception of the seven single member states (Alaska, Delaware, Montana, North Dakota, South Dakota, Vermont, and Wyoming).

For the states that have more than one representative, the Census Bureau requested a copy of the state laws or applicable court order(s) for each state from each secretary of state and each 2010 Redistricting Data Program state liaison requesting a copy of the state laws and/or applicable court order(s) for each state. Additionally, the states were asked to furnish their newly established congressional district boundaries and numbers by means of geographic equivalency files. States submitted equivalency files since most redistricting was based on whole census blocks. Kentucky was the only state where congressional district boundaries split some of the 2010 Census tabulation blocks. For further information on these blocks, please see the user-note at the bottom of the tables for this state.

The Census Bureau entered this information into its geographic database and produced tabulation block equivalency files that depicted the newly defined congressional district boundaries. Each state liaison was furnished with their file and requested to review, submit corrections, and certify the accuracy of the boundaries.

These data depict the 117th Congressional Districts and their representatives for the United States. Congressional districts are the 435 areas from which members are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states, which is based on decennial census population counts, each state with multiple seats is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The boundaries and numbers shown for the congressional districts are those specified in the state laws or court orders establishing the districts within each state.

The 119th Congressional Districts dataset reflects boundaries from January 03, 2025 from the United States Census Bureau (USCB), and the attributes are updated every Sunday from the United States House of Representatives and is part of the U.S. Department of Transportation (USDOT)/Bureau of Transportation Statistics (BTS) National Transportation Atlas Database (NTAD). The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Information for each member of Congress is appended to the Census Congressional District shapefile using information from the Office of the Clerk, U.S. House of Representatives' website https://clerk.house.gov/xml/lists/MemberData.xml and its corresponding XML file. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. This dataset also includes 9 geographies for non-voting at large delegate districts, resident commissioner districts, and congressional districts that are not defined. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 119th Congress is seated from January 3, 2025 through January 3, 2027. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The TIGER/Line shapefiles for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts reflect information provided to the Census Bureau by the states by May 31, 2024. A data dictionary, or other source of attribute information, is accessible at https://doi.org/10.21949/1529006

This feature layer, utilizing National Geospatial Data Asset (NGDA) data from the U.S. Census Bureau (USCB), displays Districts of the 118th Congress. Per USCB, "Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable."118th Congressional District 12Data currency: This cached Esri federal service is checked weekly for updates from its enterprise federal source (118th Congressional Districts) and will support mapping, analysis, data exports and OGC API – Feature access.NGDAID: 57 (Series Information for 118th Congressional District State-based TIGER/Line Shapefiles, Current)OGC API Features Link: (118th Congressional Districts) copy this link to embed it in OGC Compliant viewersFor more information, please visit: About Congressional DistrictsFor feedback, please contact: Esri_US_Federal_Data@esri.comNGDA Data SetThis data set is part of the NGDA Governmental Units, and Administrative and Statistical Boundaries Theme Community. Per the Federal Geospatial Data Committee (FGDC), this theme is defined as the "boundaries that delineate geographic areas for uses such as governance and the general provision of services (e.g., states, American Indian reservations, counties, cities, towns, etc.), administration and/or for a specific purpose (e.g., congressional districts, school districts, fire districts, Alaska Native Regional Corporations, etc.), and/or provision of statistical data (census tracts, census blocks, metropolitan and micropolitan statistical areas, etc.). Boundaries for these various types of geographic areas are either defined through a documented legal description or through criteria and guidelines. Other boundaries may include international limits, those of federal land ownership, the extent of administrative regions for various federal agencies, as well as the jurisdictional offshore limits of U.S. sovereignty. Boundaries associated solely with natural resources and/or cultural entities are excluded from this theme and are included in the appropriate subject themes."For other NGDA Content: Esri Federal Datasets

Congressional Districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable.

This map shows Congressional District boundaries for the United States. The map is set to middle Georgia.

Congressional districts are the 435 areas from which members are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states, which is based on decennial census population counts, each state with multiple seats is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The boundaries and numbers shown for the congressional districts are those specified in the state laws or court orders establishing the districts within each state.

Congressional districts for the 108th through 112th sessions were established by the states based on the result of the 2000 Census. Congressional districts for the 113th through 115th sessions were established by the states based on the result of the 2010 Census. Boundaries are effective until January of odd number years (for example, January 2015, January 2017, etc.), unless a state initiative or court ordered redistricting requires a change. All states established new congressional districts in 2011-2012, with the exception of the seven single member states (Alaska, Delaware, Montana, North Dakota, South Dakota, Vermont, and Wyoming).

For the states that have more than one representative, the Census Bureau requested a copy of the state laws or applicable court order(s) for each state from each secretary of state and each 2010 Redistricting Data Program state liaison requesting a copy of the state laws and/or applicable court order(s) for each state. Additionally, the states were asked to furnish their newly established congressional district boundaries and numbers by means of geographic equivalency files. States submitted equivalency files since most redistricting was based on whole census blocks. Kentucky was the only state where congressional district boundaries split some of the 2010 Census tabulation blocks. For further information on these blocks, please see the user-note at the bottom of the tables for this state.

The Census Bureau entered this information into its geographic database and produced tabulation block equivalency files that depicted the newly defined congressional district boundaries. Each state liaison was furnished with their file and requested to review, submit corrections, and certify the accuracy of the boundaries.

The 2015 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The records in this file allow users to map the parts of the 114th Congressional Districts that overlap a particular county. Congressional Districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 114th Congress is seated from January 2015 to 2017. The TIGER/Line shapefiles for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts are provided to the Census Bureau through the Redistricting Data Program (RDP). The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the state of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for counties and equivalent entities are mostly as of January 1, 2013, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS). However, some changes made after January 2013, including the addition and deletion of counties, are included.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 118th Congress is seated from January 2023 through December 2024. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The TIGER/Line shapefiles for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts reflect information provided to the Census Bureau by the states by August 31, 2022.

The 2023 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The records in this file allow users to map the parts of the 118th Congressional Districts that overlap a particular county. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 118th Congress is seated from January 2023 through December 2024. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The cartographic boundary files for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The generalzied boundaries of all other congressional districts are based on information provided to the Census Bureau by the states by August 31, 2022. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The generalized boundaries for counties and equivalent entities are based on those as of January 1, 2023, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS).

The following is excerpted from an online document produced by the U.S. Census Bureau pertaining to cartographic boundary files of congressional districts:"Congressional districts (CDs) are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states, based on census population counts, each state is responsible for establishing CDs for the purpose of electing representatives. Each CD is to be as equal in population to all other CDs in the state as practicable.The CDs in effect at the time of Census 2000 were those of the 106th Congress, whose session began in January 1999. The boundaries were identical to those reflected in the 107th CD boundary files. The CDs for the 103rd Congress (January 1993 to 1995) were the first to reflect redistricting based on the 1990 census. The 103rd CDs remained in effect through Census 2000, except where a state initiative or a court-ordered redistricting required a change. Six states redistricted for the 104th Congress (Georgia, Louisiana, Maine, Minnesota, South Carolina, and Virginia), five states redistricted for the 105th Congress (Florida, Georgia, Kentucky, Louisiana, and Texas), and three states (New York, North Carolina, and Virginia) redistricted for the 106th Congress. In North Carolina the "1998 Congressional Plan A" was used for the 1998 congressional elections. It was created in response to a court ruling which held the 1997 plan, "97 House/Senate Plan A," unconstitutional. These boundaries are reflected in the 106th CD boundary files. The Supreme Court has since reversed that lower court ruling and the 1997 plan, "97 House/Senate Plan A," (reflected in the 107th CD boundary files) was used for the 2000 North Carolina congressional elections. The 108th Congress is the first to reflect reapportionment and redistricting based on Census 2000 data."

The TIGER/Line shapefiles and related database files (.dbf) (NTAD 2014) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Congressional Districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the States based on census population counts, each State is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a State as practicable. The congressional districts for the 113th Congress (January 2013 to 2015) are the first Congressional Districts based on 2010 Census data. The TIGER/Line shapefiles for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts are provided to the Census Bureau through the Redistricting Data Program (RDP).

These data are a subset of a larger dataset published by the organization listed in the credits. Great Smoky Mountains National Park makes these data available in this form such that users can: effectively manipulate data for park mapping activites that do not require the aquistion of a large, nation-wide data set; alter symobology and rendering parameters natively; restrict analysis of geospatial data to an extent that coincides with the park footprint.

description: The 2016 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Congressional Districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 115th Congress is seated from January 2017 to 2019. The cartographic boundary files for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts are provided to the Census Bureau through the Redistricting Data Program (RDP).; abstract: The 2016 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Congressional Districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 115th Congress is seated from January 2017 to 2019. The cartographic boundary files for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts are provided to the Census Bureau through the Redistricting Data Program (RDP).

The downloadable ZIP file contains Esri shapefiles and PDF maps. Contains the information used to determine the location of the new legislative and congressional district boundaries for the state of Idaho as adopted by Idaho's first Commission on Redistricting on March 9, 2002. Contains viewable and printable legislative and congressional district maps, viewable and printable reports, and importable geographic data files.These data were contributed to INSIDE Idaho at the University of Idaho Library in 2001. CD/DVD -ROM availability: https://alliance-primo.hosted.exlibrisgroup.com/permalink/f/m1uotc/CP71156191150001451These files were created by a six-person, by-partisan commission, consisting of six commission members, three democrats and three republicans. This commission was given 90 days to redraw congressional and legislative district boundaries for the state of Idaho. Due to lawsuits, the process was extended. This legislative plan was approved by the commission on March 9th, 2002 and was previously called L97. All digital data originates from TIGER/Line files and 2000 U.S. Census data.Frequently asked questions:How often are Idaho's legislative and congressional districts redrawn? Once every ten years after each census, as required by law, or when directed by the Idaho Supreme Court. The most recent redistricting followed the 2000 census. Redistricting is not expected to occur again in Idaho until after the 2010 census. Who redrew Idaho's legislative and congressional districts? In 2001, for the first time, Idaho used a citizens' commission to redraw its legislative and congressional district boundaries. Before Idaho voters amended the state Constitution in 1994 to create a Redistricting Commission, redistricting was done by a committee of the Idaho Legislature. The committee's new district plans then had to pass the Legislature before becoming law. Who was on the Redistricting Commission? Idaho's first Commission on Redistricting was composed of Co-Chairmen Kristi Sellers of Chubbuck and Tom Stuart of Boise and Stanley. The other four members were Raymond Givens of Coeur d'Alene, Dean Haagenson of Hayden Lake, Karl Shurtliff of Boise, John Hepworth of Buhl (who resigned effective December 4, 2001), and Derlin Taylor of Burley (who was appointed to replace Mr. Hepworth). What are the requirements for being a Redistricting Commissioner? According to Idaho Law, no person may serve on the commission who: 1. Is not a registered voter of the state at the time of selection; or 2. Is or has been within one (1) year a registered lobbyist; or 3. Is or has been within two (2) years prior to selection an elected official or elected legislative district, county or state party officer. (This requirement does not apply to precinct committeepersons.) The individual appointing authorities may consider additional criteria beyond these statutory requirements. Idaho law also prohibits a person who has served on the Redistricting Commission from serving in either house of the legislature for five years following their service on the commission. When did Idaho's first Commission on Redistricting meet? Idaho law allows the Commission only 90 days to conduct its business. The Redistricting Commission was formed on June 5, 2001. Its 90-day time period would expire on September 3, 2001. After holding hearings around the state in June and July, a majority of the Commission voted to adopt new legislative and congressional districts on August 22, 2001. On November 29th, the Idaho Supreme Court ruled the Commission's legislative redistricting plan unconstitutional and directed them to reconvene and adopt an alternative plan. The Commission did so, adopting a new plan on January 8, 2000. The Idaho Supreme Court found the Commission's second legislative map unconstitutional on March 1, 2002 and ordered the Commission to try again. The Commission adopted a third plan on March 9, 2002. The Supreme Court denied numerous challenges to this third map. It then became the basis for the 2002 primary and General elections and is expected to be used until the 2012 elections. What is the basic timetable for Idaho to redraw its legislative and congressional districts?Typically, and according to Idaho law, the Redistricting Commission cannot be formally convened until after Idaho has received the official census counts and not before June 1 of a year ending in one. Idaho's first Commission on redistricting was officially created on June 5, 2001. By law, a Commission then has 90 days (or until September 3, 2001 in the case of Idaho's first Commission) to approve new legislative and congressional district boundaries based on the most recent census figures. If at least four of the six commissioners fail to approve new legislative and congressional district plans before that 90-day time period expires, the Commission will cease to exist. The law is silent as to what happens next. Could you summarize the important dates for Idaho's first Commission on Redistricting one more time please? After January 1, 2001 but before April 1, 2001: As required by federal law, the Census Bureau must deliver to the states the small area population counts upon which redistricting is based. The Census Bureau determines the exact date within this window when Idaho will get its population figures. Idaho's were delivered on March 23, 2001. Why conduct a census anyway? The original and still primary reason for conducting a national census every ten years is to determine how the 435 seats in the United States House of Representatives are to be apportioned among the 50 states. Each state receives its share of the 435 seats in the U.S. House based on the proportion of its population to that of the total U.S. population. For example, the population shifts during the 1990's resulted in the Northeastern states losing population and therefore seats in Congress to the Southern and the Western states. What is reapportionment? Reapportionment is a federal issue that applies only to Congress. It is the process of dividing up the 435 seats in the U.S. House of Representatives among the 50 states based on each state's proportion of the total U.S. population as determined by the most recent census. Apportionment determines the each state's power, as expressed by the size of their congressional delegation, in Congress and, through the electoral college, directly affects the selection of the president (each state's number of votes in the electoral college equals the number of its representatives and senators in Congress). Like all states, Idaho has two U.S. senators. Based on our 1990 population of 1,006,000 people and our 2000 population of 1,293,953, and relative to the populations of the other 49 states, Idaho will have two seats in the U.S. House of Representatives. Even with the state's 28.5% population increase from 1990 to 2000, Idaho will not be getting a third seat in the U.S. House of Representatives. Assuming Idaho keeps growing at the same rate it did through the decade of the 1990's, it will likely be 30 or 40 years (after 3 or 4 more censuses) before Idaho gets a third congressional seat. What is redistricting? Redistricting is the process of redrawing the boundaries of legislative and congressional districts within each state to achieve population equality among all congressional districts and among all legislative districts. The U.S. Constitution requires this be done for all congressional districts after each decennial census. The Idaho Constitution also requires that this be done for all legislative districts after each census. The democratic principle behind redistricting is "one person, one vote." Requiring that districts be of equal population ensures that every elected state legislator or U.S. congressman represents very close to the same number of people in that state, therefore, each citizen's vote will carry the same weight. How are reapportionment and redistricting related to the census? The original and still primary reason for conducting a census every ten years is to apportion the (now) 435 seats in the U.S. House of Representatives among the several states. The census records population changes and is the legally recognized basis for redrawing electoral districts of equal population. Why is redistricting so important? In a democracy, it is important for all citizens to have equal representation. The political parties also see redistricting as an opportunity to draw districts that favor electing their members and, conversely, that are unfavorable for electing their political opposition. (It's for this reason that redistricting has been described as "the purest form of political bloodsport.") What is PL 94-171? Public Law (PL) 94-171 (Title 13, United States Code) was enacted by Congress in 1975. It was intended to provide state legislatures with small-area census population totals for use in redistricting. The law's origins lie with the "one person, one vote" court decisions in the 1960's. State legislatures needed to reconcile Census Bureau's small geographic area boundaries with voting tabulation districts (precincts) boundaries to create legislative districts with balanced populations. The Census Bureau worked with state legislatures and others to meet this need beginning with the 1980 census. The resulting Public Law 94-171 allows states to work voluntarily with the Census Bureau to match voting district boundaries with small-area census boundaries. With this done, the Bureau can report to those participating states the census population totals broken down by major race group and Hispanic origin for the total population and for persons aged 18 years and older for each census subdivision. Idaho participated in the Bureau's Census 2000 Redistricting Data Program and, where counties used visible features to

Race Demographics in the 2010 CensusThis feature layer, utilizing data from the U.S. Census Bureau (USCB), contains demographics about race and ethnicity in the 2010 U.S. Census. The data is provided for state, county, tract, and block group geographies. These attributes cover topics such as the count of population, householder information, and family type by race/ethnicity.Per the Census, "Also known as the Population and Housing Census, the Decennial U.S. Census is designed to count every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute hundreds of billions of dollars in federal funds to local communities."There are four layers: state, county, census tract, and census block group. Each layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas. Only one geography is in view at any time.Race Demographics in the 2010 CensusData currency: 2010For more information: Race and Ethnicity in the United States: 2010 Census and 2020 CensusFor feedback please contact: ArcGIScomNationalMaps@esri.comData Processing notes:State and county boundaries are simplified representations offered from the Census Bureau's 2010 MAF/TIGER databaseTract and block group boundaries are 2010 TIGER boundaries with select water area boundaries erased (coastlines and major water bodies)Field names and aliases are processed by Esri as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.U.S. Census BureauPer USCB, "the Census Bureau is the federal government’s largest statistical agency. We are dedicated to providing current facts and figures about America’s people, places, and economy. Federal law protects the confidentiality of all the information the Census Bureau collects."

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. Results for sub-state geographic areas in New Mexico were released in a series of data products. These data come from Summary File 1 (SF-1). The geographic coverage for SF-1 includes the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, census tracts, block groups and blocks, among others. Table DC10_00806 is for Lincoln County and all block groups in the county. The table shows average household size for all occupied housing units combined and for owner- and renter-occupied housing units. This file, along with file descriptions (in Word and text formats) are available in a single zip file.

The 2022 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The records in this file allow users to map the parts of the 118th Congressional Districts that overlap a particular county. Congressional districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states based on census population counts, each state is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a state as practicable. The 118th Congress is seated from January 2023 through December 2024. In Connecticut, Illinois, and New Hampshire, the Redistricting Data Program (RDP) participant did not define the CDs to cover all of the state or state equivalent area. In these areas with no CDs defined, the code "ZZ" has been assigned, which is treated as a single CD for purposes of data presentation. The cartographic boundary files for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The generalzied boundaries of all other congressional districts are based on information provided to the Census Bureau by the states by August 31, 2022. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The generalized boundaries for counties and equivalent entities are based on those as of January 1, 2022, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS).