According to the book of Numbers in the Old Testament of the Bible, one year after Moses led the Israelites from Egypt during the Exodus, the number of men aged 20 years or older and available to serve in the Israelites' army totalled at 603,550 men. This census was conducted by Moses and the leaders of the 12 Tribes of Israel, with the clan of Judah contributing the largest number of men. However, only 11 of the 12 Tribes were counted, as the men of the Levites were tasked with protecting the tabernacle, which was the central mneeting and worshipping tent of the Israelitres' nomadic society during the Exodus.

This dataset provides information about our grantee spending activities. It allows visitors to see a breakdown of the areas of investment made by the census grantees, especially as they adjust to the impact of COVID-19 on outreach. Primary category of the spend group, includes Marketing, Administrative, Event Fees, Advertising. Esta base de datos proporciona información sobre la actividad de gastos de nuestros beneficiarios. Permite a los visitantes ver un desglose de las áreas de inversión realizadas por los beneficiarios del censo, especialmente a medida que se ajustan al impacto de la COVID-19 en la divulgación.

Census blocks are statistical areas bounded on all sides by visible features (e.g., streets, roads, streams, and railroad tracks), and by non-visible boundaries (e.g., city, town, township, county limits, and short line-of-sight extensions of streets and roads). Generally, census blocks are small in area (e.g., a block in a city). Census blocks in suburban and rural areas may be large, irregular, and bounded by a variety of features (e.g., roads, streams, and/or transmission line rights-of-way). In remote areas, census blocks may encompass hundreds of square miles. Census blocks cover all territory in the United States, Puerto Rico, and the Island areas. Blocks do not cross the boundaries of any entity for which the Census Bureau tabulates data.Census Block Numbers—Census blocks are numbered uniquely within the boundaries of each state, county, census tract with a 4-character census block number. The first character of the tabulation block number identifies the block group. A block number can only be unique by using the decennial census state (STATEFP

The numbers contained in this study are released pursuant to the order of the United States Court of Appeals for the Ninth Circuit in Carter v. Department of Commerce, 307 F.3d 1084. These numbers are not official Census 2000 counts. These numbers are estimates of the population based on a statistical adjustment method, utilizing sampling and modeling, applied to the official Census 2000 figures. The estimates utilized the results of the Accuracy and Coverage Evaluation (A.C.E.), a sample survey intended to measure net over- and undercounts in the census results. The Census Bureau has determined that the A.C.E. estimates dramatically overstate the level of undercoverage in Census 2000, and that the adjusted Census 2000 data are, therefore, not more accurate than the unadjusted data. On March 6, 2001, the Secretary of Commerce decided that unadjusted data from Census 2000 should be used to tabulate population counts reported to states and localities pursuant to 13 U.S.C. 141(c) (see 66 FR 14520, March 13, 2001). The Secretary's decision endorsed the unanimous recommendation of the Executive Steering Committee for A.C.E. Policy (ESCAP), a group of 12 senior career professionals within the Census Bureau. The ESCAP, in its recommendation against the use of the statistically adjusted estimates, had noted serious reservations regarding their accuracy. In order to inform the Census Bureau's planned October 2001 decision regarding the potential use of the adjusted estimates for non-redistricting purposes, the agency conducted extensive analyses throughout the summer of 2001. These extensive analyses confirmed the serious concerns the agency had noted earlier regarding the accuracy of the A.C.E. estimates. Specifically, the adjusted estimates were determined to be so severely flawed that all potential uses of these data would be inappropriate. Accordingly, the Department of Commerce deems that these estimates should not be used for any purpose that legally requires use of data from the decennial census and assumes no responsibility for the accuracy of the data for any purpose whatsoever. The Department, including the U.S. Census Bureau, will provide no assistance in the interpretation or use of these numbers. The collection contains four tables: (1) a count of all persons by race (Table PL1), (2) a count of Hispanic or Latino and a count of not Hispanic or Latino by race of all persons (Table PL2), (3) a count of the population 18 years and older by race (Table PL3), and (4) a count of Hispanic or Latino and a count of not Hispanic or Latino by race for the population 18 years and older (Table PL4).

Census.gov / 2023 Public Elementary-Secondary Education Finance Data

Overview

Data

census.gov (school-finances)
census.gov (geo)
census.gov (SAIPE) - the Small Area Income and Poverty Estimates (SAIPE)

Example usage

Colab notebook
Blog post

License

The U.S. Census Bureau generally makes its data and information publicly available without requiring a specific license, meaning you can use it for most purposes, including commercial use, without explicit permission or payment, as it is government-produced information. The Census Bureau's website (census.gov) states that its data is publicly accessible, and for the specific dataset mentioned, it is likely covered under the general policy of public data availability from the Census Bureau.

2020 Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and are reviewed and updated by local participants prior to each decennial census as part of the Census Bureau’s Participant Statistical Areas Program (PSAP). The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of decennial census data. Census tracts generally have a total population size between 1,200 and 8,000 people with an optimum size of 4,000 people. The spatial size of census tracts varies widely depending on the density of settlement. Ideally, census tract boundaries remain stable over time to facilitate statistical comparisons from census to census. However, physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, significant changes in population may result in splitting or combining census tracts. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy, but tracts can cross the same kinds of boundaries that block groups can. Census tract numbers have up to a 4-character basic number and may have an optional 2-character suffix. The census tract numbers (used as names) eliminate any leading zeroes and append a suffix only if required. The 6-digit census tract codes, however, include leading zeroes and have an implied decimal point for the suffix. Census tract codes (000100 to 998999) are unique within a county or equivalent area.

USE geoid20 TO JOIN DATA DOWNLOADED FROM DATA.CENSUS.GOV The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Blocks (Census Blocks or Tabulation Blocks) are statistical areas bounded by visible features, such as streets, roads, streams, and railroad tracks, and by nonvisible boundaries, such as selected property lines and city, township, school district, and county limits and short line-of-sight extensions of streets and roads. Generally, blocks are small in area; for example, a city block bounded on all sides by streets. Blocks in suburban and rural areas may be larger, more irregular in shape, and bounded by a variety of features, such as roads, streams, and transmission lines. In remote areas, blocks may even encompass hundreds of square miles. Blocks cover the entire territory of the United States, Puerto Rico, and the Island Areas. Blocks nest within all other tabulated census geographic entities at the time of the decennial census and are the basis for all tabulated data from that census. Census Block Numbers—Blocks are numbered uniquely with a four-digit census block number from 0000 to 9999 within census tract, which nest within state and county. The first digit of the census block number identifies the block group. Block numbers beginning with a zero (in Block Group 0) are intended to include only water area, but not all water-only blocks have block numbers beginning with 0 (zero). Downloaded from https://www2.census.gov/geo/tiger/TIGER2020/TABBLOCK20 on May 17, 2023

From the 2022 TIGER/Line Technical Documentation:Census blocks are statistical areas bounded on all sides by visible features (e.g., streets, roads, streams, and railroad tracks), and by non-visible boundaries (e.g., city, town, township, county limits, and short line-of-sight extensions of streets and roads). Generally, census blocks are small in area (e.g., a block in a city). Census blocks in suburban and rural areas may be large, irregular, and bounded by a variety of features (e.g., roads, streams, and/or transmission line rights-of-way). In remote areas, census blocks may encompass hundreds of square miles. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas. Blocks do not cross the boundaries of any entity for which the Census Bureau tabulates data. (See Figures 12 and 13). Census Block Numbers—Census blocks are numbered uniquely within the boundaries of each state, county, census tract with a 4-character census block number. The first character of the tabulation block number identifies the block group. A block number can only be unique by using the decennial census state (STATEFP

The 1998 Dress Rehearsal was conducted as a prelude to the United States Census of Population and Housing, 2000, in the following locations: (1) Columbia, South Carolina, and surrounding areas, including the town of Irmo and the counties of Chester, Chesterfield, Darlington, Fairfield, Kershaw, Lancaster, Lee, Marlboro, Newberry, Richland, and Union, (2) Sacramento, California, and (3) Menominee County, Wisconsin, including the Menominee American Indian Reservation. This collection contains map files showing various levels of geography (in the form of Census Tract Outline Maps, Voting District/State Legislative District Outline Maps, and County Block Maps), TIGER/Line digital files, and Corner Point files for the Census 2000 Dress Rehearsal sites. The Corner Point data files contain the bounding latitude and longitude coordinates for each individual map sheet of the 1998 Dress Rehearsal Public Law (P.L.) 94-171 map products. These files include a sheet identifier, minimum and maximum longitude, minimum and maximum latitude, and the map scale (integer value) for each map sheet. The latitude and longitude coordinates are in decimal degrees and expressed as integer values with six implied decimal places. There is a separate Corner Point File for each of the three map types: County Block Map, Census Tract Outline Map, and Voting District/State Legislative District Outline Map. Each of the three map file types is provided in two formats: Portable Document Format (PDF), for viewing, and Hewlett-Packard Graphics Language (HP-GL) format, for plotting. The County Block Maps show the greatest detail and the most complete set of geographic information of all the maps. These large-scale maps depict the smallest geographic entities for which the Census Bureau presents data -- the census blocks -- by displaying the features that delineate them and the numbers that identify them. These maps show the boundaries, names, and codes for American Indian/Alaska Native areas, county subdivisions, places, census tracts, and, for this series, the geographic entities that the states delineated in Phase 2, Voting District Project, of the Redistricting Data Program. The HP-GL version of the County Block Maps is broken down into index maps and map sheets. The map sheets cover a small area, and the index maps are composed of multiple map sheets, showing the entire area. The intent of the County Block Map series is to provide a map for each county on the smallest possible number of map sheets at the maximum practical scale, dependent on the area size of the county and the density of the block pattern. The latter affects the display of block numbers and feature identifiers. The Census Tract Outline Maps show the boundaries and numbers of census tracts, and name the features underlying the boundaries. These maps also show the boundaries and names of counties, county subdivisions, and places. They identify census tracts in relation to governmental unit boundaries. The mapping unit is the county. These large-format maps are produced to support the P.L. 94-171 program and all other 1998 Dress Rehearsal data tabulations. The Voting District/State Legislative District Outline Maps show the boundaries and codes for voting districts as delineated by the states in Phase 2, Voting District Project, of the Redistricting Data Program. The features underlying the voting district boundaries are shown, as well as the names of these features. Additionally, for states that submit the information, these maps show the boundaries and codes for state legislative districts and their underlying features. These maps also show the boundaries of and names of American Indian/Alaska Native areas, counties, county subdivisions, and places. The scale of the district maps is optimized to keep the number of map sheets for each area to a minimum, but the scale and number of map sheets will vary by the area size of the county and the voting districts and state legislative districts delineated by the states. The Census 2000 Dress Rehearsal TIGER/Line Files consist of line segments representing physical features and governmental and statistical boundaries. The files contain information distributed over a series of record types for the spatial objects of a county. These TIGER/Line Files are an extract of selected geographic and cartographic information from the Census TIGER (Topological

This dataset contains polygons that represent the boundaries of statistical neighborhoods as defined by the DC Department of Health (DC Health). DC Health delineates statistical neighborhoods to facilitate small-area analyses and visualization of health, economic, social, and other indicators to display and uncover disparate outcomes among populations across the city. The neighborhoods are also used to determine eligibility for some health services programs and support research by various entities within and outside of government. DC Health Planning Neighborhood boundaries follow census tract 2010 lines defined by the US Census Bureau. Each neighborhood is a group of between one and seven different, contiguous census tracts. This allows for easier comparison to Census data and calculation of rates per population (including estimates from the American Community Survey and Annual Population Estimates). These do not reflect precise neighborhood locations and do not necessarily include all commonly-used neighborhood designations. There is no formal set of standards that describes which neighborhoods are included in this dataset. Note that the District of Columbia does not have official neighborhood boundaries. Origin of boundaries: each neighborhood is a group of between one and seven different, contiguous census tracts. They were originally determined in 2015 as part of an analytical research project with technical assistance from the Centers for Disease Control and Prevention (CDC) and the Council for State and Territorial Epidemiologists (CSTE) to define small area estimates of life expectancy. Census tracts were grouped roughly following the Office of Planning Neighborhood Cluster boundaries, where possible, and were made just large enough to achieve standard errors of less than 2 for each neighborhood's calculation of life expectancy. The resulting neighborhoods were used in the DC Health Equity Report (2018) with updated names. HPNs were modified slightly in 2019, incorporating one census tract that was consistently suppressed due to low numbers into a neighboring HPN (Lincoln Park incorporated into Capitol Hill). Demographic information were analyzed to identify the bordering group with the most similarities to the single census tract. A second change split a neighborhood (GWU/National Mall) into two to facilitate separate analysis.

List of Census Tract Numbers for each state by county. Census Tract Numbers are posted in two files: Alabama through Montana and Nebraska through Wyoming.

Census tracts are small and relatively permanent statistical subdivisions of a county or equivalent entity. Local participants review and update census tracts prior to each decennial census as part of the Census Bureau’s PSAP. The Census Bureau updates census tracts in situations where no local participant existed or where local or tribal governments declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of decennial census data. Census tracts generally have a population size of 1,200 to 8,000 people with an optimum size of 4,000 people. The spatial size of census tracts varies widely depending on the density of settlement. Ideally, census tract boundaries remain stable over time to facilitate statistical comparisons from census to census. However, physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, significant changes in population may result in splitting or combining census tracts. Census tract boundaries generally follow visible and identifiable features. Census tract boundaries may follow legal boundaries (e.g., MCD or incorporated place boundaries in some states to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses). State and county boundaries always are census tract boundaries in the standard census geographic hierarchy.In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. Census Tract Codes and Numbers—Census tract numbers have up to a 4-character basic number and may have an optional 2-character suffix. For example, 1457.02. The census tract numbers (used as names) eliminate any leading zeroes and append a suffix only if required. The 6-digit census tract codes, however, include leading zeroes and have an implied decimal point for the suffix. Census tract codes (000100 to 998999) are unique within a county or equivalent area. The Census Bureau assigned a census tract code of 9900 to represent census tracts delineated to cover large bodies of water. In addition, census tract codes in the 9400s represent American Indian Areas and codes in the 9800s represent special land use areas. The Census Bureau uses suffixes to help identify census tract changes for comparison purposes. Local participants have an opportunity to review the existing census tracts before each census. If local participants split a census tract, the split parts usually retain the basic number, but receive different suffixes. In a few counties, local participants request major changes to, and renumbering of, the census tracts. Changes to individual census tract boundaries usually do not result in census tract numbering changes. Relationship to Other Geographic Entities—Within the standard census geographic hierarchy, census tracts never cross state or county boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and AIANNH areas. Census Tract Numbers and Codes: 000100 to 939999 - Basic number range for census tracts940000 to 949999 - American Indian Areas950000 to 979999 - Basic number range for census tracts980000 to 989999 - Special land use areas990000 to 990099 - Basic number range for census tracts in water areas990100 to 998900 - Basic number range for census tracts 2020 Census legal boundaries (TIGER/Line Shapefiles) were downloaded from the Census website. Data pertaining to Somerset County was extracted and processed by the Somerset County Office of GIS Services (SCOGIS)

Area, number of existing street numbers in the area, registered household numbers in the area, number of existing lane numbers, registered lane numbers, number of households, total population, male population, female population.

This feature set contains household and population projections from Projections 2040 for the San Francisco Bay Region. This forecast represents household and population projections resulting from Plan Bay Area 2040. Numbers are provided by 2010 Census Tract. Household and population numbers are included for 2010 (two versions), 2015, 2020, 2025, 2030, 2035, and 2040. For 2010, two data points are provided:A tabulation (base year A) from the 2010 model simulation (base year A); and(Preferred) A tabulation (base year B) from the 2010 pre-run microdata, designed to approximate (but may still differ from) Census 2010 counts.Projection data is included for total households, total population, household population, and group quarters population.This feature set was assembled using unclipped Census Tract features. For those who prefer Projections 2040 data using jurisdiction features with ocean and bay waters clipped out, the data in this feature service can be joined to San Francisco Bay Region 2010 Census Tracts (clipped). Clipping the Census Tract features does result in the removal of some water tracts, which are usually empty, so there is a difference in the number of features between the two services.Other Projections 2040 feature sets:Households and population per countyHouseholds and population per jurisdiction (incorporated place and unincorporated county)Jobs and employment per countyJobs and employment per jurisdiction (incorporated place and unincorporated county)Jobs per Census TractFemale population, by age range, per countyFemale population, by age range, per jurisdiction (incorporated place and unincorporated county)Male population, by age range, per countyMale population, by age range, per jurisdiction (incorporated place and unincorporated county)Total population, by age range, per countyTotal population, by age range, per jurisdiction (incorporated place and unincorporated county)

This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) System (MTS). The MTS represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. A tribal census tract is a relatively permanent statistical subdivision of a federally recognized American Indian reservation and/or off-reservation trust land, delineated by the American Indian tribal government and/or the Census Bureau for the purpose of presenting demographic data. For the 2020 Census, tribal census tracts are defined independently of the standard county-based census tract delineation. For federally recognized American Indian Tribes with reservations and/or off-reservation trust lands with a population less than 2,400, a single tribal census tract is defined. Qualifying areas with a population greater than 2,400 could define additional tribal census tracts within their area. The tribal census tract codes for the 2020 Census are six characters long with a leading ""T"" alphabetic character followed by a five-digit numeric code, for example, T01000, which translates as tribal census tract 10. Tribal block groups nest within tribal census tracts. Since individual tabulation blocks are defined within the standard State-county-census tract geographic hierarchy, a tribal census tract can contain seemingly duplicate block numbers, thus tribal census tracts cannot be used to uniquely identify census tabulation blocks for the 2020 Census. The boundaries of tribal census tracts are those delineated through the Participant Statistical Areas Program (PSAP) for the 2020 Census.

Source: U.S. Census Bureau, PL 94-171 Redistricting data, 2000 and 2010. Note: Census numbers for the cities of Burien and Kent do not include annexations that took place after March 31, 2010. These annexations would increase Burien to 48,072, Kent to 118,565, and decrease uninc King County to 284,089.

Splitgraph serves as an HTTP API that lets you run SQL queries directly on this data to power Web applications. For example:

See the Splitgraph documentation for more information.

About this dataset

Context

The dataset tabulates the data for the Green Bay, WI population pyramid, which represents the Green Bay population distribution across age and gender, using estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates. It lists the male and female population for each age group, along with the total population for those age groups. Higher numbers at the bottom of the table suggest population growth, whereas higher numbers at the top indicate declining birth rates. Furthermore, the dataset can be utilized to understand the youth dependency ratio, old-age dependency ratio, total dependency ratio, and potential support ratio.

Key observations

• Youth dependency ratio, which is the number of children aged 0-14 per 100 persons aged 15-64, for Green Bay, WI, is 30.4.
• Old-age dependency ratio, which is the number of persons aged 65 or over per 100 persons aged 15-64, for Green Bay, WI, is 20.9.
• Total dependency ratio for Green Bay, WI is 51.3.
• Potential support ratio, which is the number of youth (working age population) per elderly, for Green Bay, WI is 4.8.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group for the Green Bay population analysis. Total expected values are 18 and are define above in the age groups section.
• Population (Male): The male population in the Green Bay for the selected age group is shown in the following column.
• Population (Female): The female population in the Green Bay for the selected age group is shown in the following column.
• Total Population: The total population of the Green Bay for the selected age group is shown in the following column.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Green Bay Population by Age. You can refer the same here

Historical population counts for municipalities in the State of Vermont (1791-2020) compiled by the Vermont Historical Society (years 1791-2010) then appended with 2020 Census counts.An attempt was made to convert counts to current town names to allow for analyses of population change of an area over time. The Historical Society notes, “For example, the census numbers from Kellyvale are counted as the town of Lowell because the name was changed in 1831. Cabot is included in Washington County records, even though it was in Caledonia County through the 1850 census.” This does create some issues where there are changes in geography such as boundary changes, annexations, and new incorporations (such as Rutland City splitting off from Rutland Town).The Historical Society collected the data from a variety of sources.The 1791-2010 data was extracted from PDF’s by VCGI Open Data Fellow Kendal Fortney in 2017.

US Census data describing national gender and race demographics from 2000 to 2020.

The 2000 and 2010 data is fairly straight-forward. The US census website only had the caveat that the 2010 category for "Some other race-only" may have been between (19.1-20.1 million / 6.2-6.5%) and the category for "2 or more races" may have been a range (8.0-9.0 million / 2.6-2.9%). The numbers used in the dataset were the final numbers that the US census gives as their final numbers.

The official 2020 Census data will not be released until May 2023, so the numbers given are not official yet.

2020 Gender: The gender numbers are an estimate (163.8-164.8 million female / 166.9-167.8 million male). I used numbers that kept the ratio and summed to the total population. 2020 Race: The categories "Some other race-only" and "2 or more races" increased significantly for 2020. These changes are mainly due to a difference in how the race and ethnicity questions were asked. (It wasn't only because the demographics themselves changed, but mainly in how people answer the question.) The "Some other race-only" includes mostly Latino and Hispanic people (94%). The "2 or more races" category includes mostly people who are both White and another race(s) (86%). You should take this change into account when comparing an earlier census to the 2020 census. Race "Minority": Lastly, the minority category is calculated by subtracting the population of White-only, Non-Hispanic people from the total US population. Anyone who is any other race besides white AND anyone who is Latino/Hispanic would fall into the minority category.

Sources: 2000 Gender (1st paragraph), 2000 Race (page 3) 2010 Gender (2nd paragraph), 2010 Race (page 4) 2020 Gender Estimates (Estimates by Age and Sex table), 2020 Race (1) (throughout article), 2020 Race (2) ("What are facts for my country" section), 2020 Race (3) (Extra, similar)