Starting in July, data.census.gov will be the primary way to access Census Bureau data, including upcoming releases from the 2018 American Community Survey, 2017 Economic Census, 2020 Census and more. After July 1, 2019, all new data (previously released on American FactFinder) will be released on this new data platform. (https://factfinder.census.gov/faces/nav/jsf/pages/index.xhtml)

About this dataset

Context

The dataset tabulates the Portal population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Portal. The dataset can be utilized to understand the population distribution of Portal by age. For example, using this dataset, we can identify the largest age group in Portal.

Key observations

The largest age group in Portal, GA was for the group of age Under 5 years years with a population of 77 (11.79%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Portal, GA was the 85 years and over years with a population of 11 (1.68%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Portal is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Portal total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Portal Population by Age. You can refer the same here

The United States Census Bureau publishes geographic units used for tabulation of the 2020 Census population data in the 2020 TIGER/Line Shapefile. The geographic units, which remain constant throughout the decade, include counties, census tracts, block groups, and blocks. Fields have been added so data formatted or published by the council can be joined to the shapefile for analysis. Each Shapefile (.shp) is in a compressed file (.zip) format. Blocks.zip - Census Blocks BlockGroups.zip - Block Groups Tracts.zip - Census Tracts Counties.zip - Counties Cities.zip - Census Places (Cities) CDPs.zip - Census Designated Places Each 'Pop' file contains the 2020 Census population for the corresponding geographic level. BlocksPop.zip - Census Blocks 2020 Census Population BlockGroupPop.zip - Census Block Groups 2020 Census Population TractsPop.zip - Census Tracts 2020 Census Population CountiesPop.zip - Counties 2020 Census Population

U.S. Census BlocksThis feature layer, utilizing National Geospatial Data Asset (NGDA) data from the U.S. Census Bureau (USCB), displays Census Blocks in the United States. A brief description of Census Blocks, per USCB, is that "Census blocks are statistical areas bounded by visible features such as roads, streams, and railroad tracks, and by nonvisible boundaries such as property lines, city, township, school district, county limits and short line-of-sight extensions of roads." Also, "the smallest level of geography you can get basic demographic data for, such as total population by age, sex, and race."Census Block 1007Data currency: This cached Esri federal service is checked weekly for updates from its enterprise federal source (Census Blocks) and will support mapping, analysis, data exports and OGC API – Feature access.NGDAID: 69 (Series Information for 2020 Census Block State-based TIGER/Line Shapefiles, Current)OGC API Features Link: (U.S. Census Blocks - OGC Features) copy this link to embed it in OGC Compliant viewersFor more information, please visit: What are census blocksFor feedback please contact: Esri_US_Federal_Data@esri.comNGDA Data SetThis data set is part of the NGDA Governmental Units, and Administrative and Statistical Boundaries Theme Community. Per the Federal Geospatial Data Committee (FGDC), this theme is defined as the "boundaries that delineate geographic areas for uses such as governance and the general provision of services (e.g., states, American Indian reservations, counties, cities, towns, etc.), administration and/or for a specific purpose (e.g., congressional districts, school districts, fire districts, Alaska Native Regional Corporations, etc.), and/or provision of statistical data (census tracts, census blocks, metropolitan and micropolitan statistical areas, etc.). Boundaries for these various types of geographic areas are either defined through a documented legal description or through criteria and guidelines. Other boundaries may include international limits, those of federal land ownership, the extent of administrative regions for various federal agencies, as well as the jurisdictional offshore limits of U.S. sovereignty. Boundaries associated solely with natural resources and/or cultural entities are excluded from this theme and are included in the appropriate subject themes."For other NGDA Content: Esri Federal Datasets

Taken from the 2010 TIGER census shape file, Data Driven Detroit selected the Detroit tracts and created a separate file

Census blocks are geographic areas within a census block group. U.S. Census blocks are the smallest geographic entities within a county for which the Census Bureau tabulates population.

Census tracts are small, relatively permanent statistical subdivisions of a county delineated by local participants as part of the U.S. Census Bureau's Participant Statistical Areas Program. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of decennial census data. Census tracts generally have between 1,500 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts are designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement.

This data layer is an element of the Oregon GIS Framework. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2020 Census blocks nest within every other 2020 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces

Economic census data for Chennai

Census tracts are small, relatively permanent statistical subdivisions of a county delineated by local participants as part of the U.S. Census Bureau's Participant Statistical Areas Program. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of decennial census data. Census tracts generally have between 1,500 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts are designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement.

Census blocks are geographic areas within a census block group. U.S. Census blocks are the smallest geographic entities within a county for which the Census Bureau tabulates population.

This dataset lists the total population 18 years and older by census block in Connecticut before and after population adjustments were made pursuant to Public Act 21-13. PA 21-13 creates a process to adjust the U.S. Census Bureau population data to allow for most individuals who are incarcerated to be counted at their address before incarceration. Prior to enactment of the act, these inmates were counted at their correctional facility address. The act requires the CT Office of Policy and Management (OPM) to prepare and publish the adjusted and unadjusted data by July 1 in the year after the U.S. census is taken or 30 days after the U.S. Census Bureau’s publication of the state’s data. A report documenting the population adjustment process was prepared by a team at OPM composed of the Criminal Justice Policy and Planning Division (OPM CJPPD) and the Data and Policy Analytics (DAPA) unit. The report is available here: https://portal.ct.gov/-/media/OPM/CJPPD/CjAbout/SAC-Documents-from-2021-2022/PA21-13_OPM_Summary_Report_20210921.pdf Note: On September 21, 2021, following the initial publication of the report, OPM and DOC revised the count of juveniles, reallocating 65 eighteen-year-old individuals who were incorrectly designated as being under age 18. After the DOC released the updated data to OPM, the report and this dataset were updated to reflect the revision.

2019 US Census All Counties and County Equivalents geospatial data

U.S. Census Bureau; TIGER/Line Shapefiles 2019 Data accessed from: https://www.census.gov/geographies/mapping-files/time-series/geo/tiger-line-file.2019.html

TIGER/Line Shapefiles do not include demographic data, but they do contain geographic entity codes (GEOIDs) that can be linked to the Census Bureau’s demographic data.

The Geographic Areas Reference Manual (GARM) describes in great detail the basic geographic entities the Census Bureau uses (https://www.census.gov/programs-surveys/acs/geography-acs.html).

TIGER Data Products Guide (https://www.census.gov/programs-surveys/geography/guidance/tiger-data-products-guide.html)

A census block group (BG) is a cluster of census blocks having the same first digit of their four-digit identifying numbers within a census tract. For example, block group 3 (BG 3) within a census tract includes all blocks numbered from 3000 to 3999. BGs generally contain between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants as part of the U.S. Census Bureau's Participant Statistical Areas Program.

Census designated places (CDPs) are statistical geographic entities representing closely settled, unincorporated communities that are locally recognized and identified by name. They are the statistical equivalents of incorporated places, with the primary differences being the lack of a legally defined boundary and an active, functioning governmental structure, chartered by the state and administered by elected officials.Census geographies are created ahead of each decennial census to tabulate census data. The geographic files are released ahead of data releases. Blocks are the smallest geographic unit available and are the basis for all other census geographic tabulations. Block groups are an aggregation of blocks; they are the the next level up in the census geography hierarchy. Census tracts are an aggregation level above block groups. Tracts nest within counties. CDPs are an upward aggregation of blocks.

U.S. Census Populated Place Areas represents the 2020 U.S. Census populated place areas of the United States that include incorporated places, cities, and census designated places identified by the U.S. Census Bureau.This layer is updated annually. The geography is sourced from U.S. Census Bureau 2020 TIGER FGDB (National Sub-State) and edited using TIGER Hydrography to add a detailed coastline for cartographic purposes. Attribute fields include 2020 total population from the U.S. Census Public Law 94 data. The Population Class field values represent population ranges as follows:Population from 0 - 249Population from 250 - 499Population from 500 - 999Population from 1,000 - 2,499Population from 2,500 - 9,999Population from 10,000 - 49,999Population from 50,000 - 99,999Population from 100,000 - 249,999Population from 250,000 - 499,999Population 500,000 and overThis ready-to-use layer can be used in ArcGIS Pro and in ArcGIS Online and its configurable apps, dashboards, StoryMaps, custom apps, and mobile apps. The data can also be exported for offline workflows. Cite the 'U.S. Census Bureau' when using this data.

2010 Deschutes County, Oregon Census Tracts. Census tracts are small, relatively permanent statistical subdivisions of a county delineated by local participants as part of the U.S. Census Bureau's Participant Statistical Areas Program. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of decennial census data. Census tracts generally have between 1,500 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts are designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement.

Notes: These 7 fields are mutually exclusive. Use them if you need the sum of the race categories to equal total population. NH_WHITE_O Not Hispanic or Latino: Population of one race: White alone NH_BLACK_O Not Hispanic or Latino: Population of one race: Black or African American alone NH_AIAN_ON Not Hispanic or Latino: Population of one race: American Indian and Alaska Native alone NH_ASIAN_O Not Hispanic or Latino: Population of one race: Asian alone NH_NHOPI_O Not Hispanic or Latino: Population of one race: Native Hawaiian and Other Pacific Islander alone NH_OTHER Not Hispanic or Latino: Population of one race: Some Other Race alone NH_TWO_OR_ Not Hispanic or Latino: Population of two or more races

Use these fields to include all people who chose the specific race. For example, 30% of Oregonians who chose ""Black or African American"" also chose another race and some also chose Hispanic, so the NH_BLACK_O field under reports the African American population. The sum of these fields may exceed total population.WH_AOIC White alone or in combination with one or more other races BL_AOIC Black or African American alone or in combination with one or more other races AIAN_AOIC American Indian and Alaska Native alone or in combination with one or more other races ASN_AOIC Asian alone or in combination with one or more other races NHOPI_AOIC Native Hawaiian and Other Pacific Islander alone or in combination with one or more other races OTH_AOIC Some Other Race alone or in combination with one or more other races.

2010 Deschutes County, Oregon Census Block Groups. A census block group (BG) is a cluster of census blocks having the same first digit of their four-digit identifying numbers within a census tract. For example, block group 3 (BG 3) within a census tract includes all blocks numbered from 3000 to 3999. BGs generally contain between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants as part of the U.S. Census Bureau's Participant Statistical Areas Program.

Notes: These 7 fields are mutually exclusive. Use them if you need the sum of the race categories to equal total population. NH_WHITE_O Not Hispanic or Latino: Population of one race: White alone NH_BLACK_O Not Hispanic or Latino: Population of one race: Black or African American alone NH_AIAN_ON Not Hispanic or Latino: Population of one race: American Indian and Alaska Native alone NH_ASIAN_O Not Hispanic or Latino: Population of one race: Asian alone NH_NHOPI_O Not Hispanic or Latino: Population of one race: Native Hawaiian and Other Pacific Islander alone NH_OTHER Not Hispanic or Latino: Population of one race: Some Other Race alone NH_TWO_OR_ Not Hispanic or Latino: Population of two or more races

Use these fields to include all people who chose the specific race. For example, 30% of Oregonians who chose ""Black or African American"" also chose another race and some also chose Hispanic, so the NH_BLACK_O field under reports the African American population. The sum of these fields may exceed total population.WH_AOIC White alone or in combination with one or more other races BL_AOIC Black or African American alone or in combination with one or more other races AIAN_AOIC American Indian and Alaska Native alone or in combination with one or more other races ASN_AOIC Asian alone or in combination with one or more other races NHOPI_AOIC Native Hawaiian and Other Pacific Islander alone or in combination with one or more other races OTH_AOIC Some Other Race alone or in combination with one or more other races.

This shapefile describes the Census 2010 published population estimates by US County-equivalent boundaries for the United States.

The original Census 2010 County-equivalent shapefile with Selected Demographic and Economics Data was obtained from the US Census Bureau TIGER/Line data: http://www2.census.gov/geo/tiger/TIGER2010DP1/County_2010Census_DP1.zip

Other TIGER/Line Selected Demographic and Economics Data shapefiles can be found at the US Census Bureau TIGER/Line web portal: https://www.census.gov/geo/maps-data/data/tiger-data.html

The Handloom Census is a specialized survey undertaken to understand the intricacies of India's handloom sector, which boasts a rich heritage and provides livelihood to millions. This census captures data on the number of weavers, their socio-economic conditions, types of looms in use, patterns of production, and market dynamics. It also delves into the challenges faced by artisans, from technological constraints to financial hardships. The insights from the Handloom Census are invaluable for policymakers, designers, and industry stakeholders, enabling them to frame supportive policies, develop market strategies, and ensure the sustenance and growth of this traditional industry in the face of modern competition.