National Hydrography Dataset NHDFlowline layer with spatial representation of existing water uses defined in Title 25 Environmental Protection, Department of Environmental Protection, Chapter 93, Water Quality Standards. The Pennsylvania Code just cited provides a definition for distinguishing between designated and existing use classification. This GIS layer displays these uses spatially on an interactive stream map. Public users can drill down to locations on the map to view and map the existing uses of the water bodies of interest. The layer can also be used in conjunction with other spatially referenced data for spatial analyses.

These data, offered to provide a spatial representation of standards contained in the Pennsylvania Code. Title 25 Environmental Protection, Department of Environmental Protection, Chapter 93, Water Quality Standards, are current and accurate to the best of our knowledge and are appropriately updated as required. These data should not be substituted for the official version of the standards in the Pennsylvania code. National Hydrography Dataset NHDFlowline layer with a spatial representation of designated water uses defined in Title 25 Environmental Protection, Department of Environmental Protection, Chapter 93, Water Quality Standards. The Pennsylvania Code just cited provides a list of all streams or watersheds (basins) in the state along with their associated designated water uses. This GIS layer displays these uses spatially on an interactive stream map. Public users can drill down to locations on the map to view and map the designated uses of the water bodies of interest. The layer can also be used in conjunction with other spatially referenced data for spatial analyses. When a stream segment has both a use and a special protection, the segment is displayed according to the special protection on eMapPA. For example, a segment that is classified as Cold Water Fish and High Quality Waters (HQ-CWF) will be shown in the High Quality blue-green color. Do not infer water use from stream color; rather, verify water use under the USE_DESCRIPTION field in the attribute table on an identify. When the Streams NHD layer and the Streams Designated Use layer are toggled visible on eMapPA at the same time, they essentially overlap each other. Streams Designated Use has a higher priority in terms of layering, so this layer will be seen on the map. The best practice is to have only one streams layer visible at any given time in order to avoid confusion.

National Hydrography Dataset NHDFlowline layer with spatial representation of existing water uses defined in Title 25 Environmental Protection, Department of Environmental Protection, Chapter 93, Water Quality Standards. The Pennsylvania Code just cited provides a definition for distinguishing between designated and existing use classification. This GIS layer displays these uses spatially on an interactive stream map. Public users can drill down to locations on the map to view and map the existing uses of the water bodies of interest. The layer can also be used in conjunction with other spatially referenced data for spatial analyses.

National Hydrography Dataset NHDFlowline layer with a spatial representation of designated water uses defined in Title 25 Environmental Protection, Department of Environmental Protection, Chapter 93, Water Quality Standards. The Pennsylvania Code just cited provides a list of all streams or watersheds (basins) in the state along with their associated designated water uses. This GIS layer displays these uses spatially on an interactive stream map. Public users can drill down to locations on the map to view and map the designated uses of the water bodies of interest. The layer can also be used in conjunction with other spatially referenced data for spatial analyses.

National Hydrography Dataset NHDFlowline layer with a spatial representation of designated water uses defined in Title 25 Environmental Protection, Department of Environmental Protection, Chapter 93, Water Quality Standards. The Pennsylvania Code just cited provides a list of all streams or watersheds (basins) in the state along with their associated designated water uses. This GIS layer displays these uses spatially on an interactive stream map. Public users can drill down to locations on the map to view and map the designated uses of the water bodies of interest. The layer can also be used in conjunction with other spatially referenced data for spatial analyses.

See full Data Guide here. Surface Water Quality Classifications Set:

This dataset is a line and a polygon feature-based layer compiled at 1:24,000 scale that includes water quality classification information for surface waters for all areas of the State of Connecticut. The Surface Water Quality Classifications and the Ground Water Quality Classifications are usually presented together as a depiction of water quality classifications in Connecticut. Water Quality Classifications, based on the adopted Water Quality Standards, establish designated uses for surface and ground waters and identify the criteria necessary to support those uses. This edition of the Surface Water Quality Classifications is based on the Water Quality Standards adopted on February 25, 2011. Surface Water means the waters of Long Island Sound, its harbors, embayments, tidal wetlands and creeks; rivers and streams, brooks, waterways, lakes, ponds, marshes, swamps, bogs, federal jurisdictional wetlands, and other natural or artificial, public or private, vernal or intermittent bodies of water, excluding groundwater. The surface waters includes the coastal waters as defined by Section 22a-93 of the Connecticut General Statutes and means those waters of Long Island Sound and its harbors, embayments, tidal rivers, streams and creeks, which contain a salinity concentration of at least five hundred parts per million under the low flow stream conditions as established by the Commissioner of the Department of Environmental Protection. The Surface Water Quality Classes are AA, A, B, SA and SB. All surface waters not otherwise classified are considered as Class A if they are in Class GA Ground Water Quality Classifications areas. Class AA designated uses are: existing or proposed drinking water, fish and wildlife habitat, recreational use (maybe restricted), agricultural and industrial supply. Class A designated uses are: potential drinking water, fish and wildlife habitat, recreational use, agricultural and industrial supply. Class B designated uses are: fish and wildlife habitat, recreational use, agricultural and industrial supply and other legitimate uses including navigation. Class B* surface water is a subset of Class B waters and is identical in all ways to the designated uses, criteria and standards for Class B waters except for the restriction on direct discharges. Coastal water and marine classifications are SA and SB. Class SA designated uses are: marine fish, shellfish and wildlife habitat, shellfish harvesting for direct human consumption, recreation and other legitimate uses including navigation. Class SB designated uses are: marine fish, shellfish and wildlife habitat, shellfish harvesting for transfer to approved areas for purification prior to human consumption, recreation and other legitimate uses including navigation. There are three elements that make up the Water Quality Standards which is an important element in Connecticut's clean water program. The first of these is the Standards themselves. The Standards set an overall policy for management of water quality in accordance with the directive of Section 22a-426 of the Connecticut General Statutes. The policies can be simply summarized by saying that the Department of Environmental Protection shall: Protect surface and ground waters from degradation, Segregate waters used for drinking from those that play a role in waste assimilation, Restore surface waters that have been used for waste assimilation to conditions suitable for fishing and swimming, Restore degraded ground water to protect existing and designated uses, Provide a framework for establishing priorities for pollution abatement and State funding for clean up, Adopt standards that promote the State's economy in harmony with the environment. The second element is the Criteria, the descriptive and numerical standards that describe the allowable parameters and goals for the various water quality classifications. The final element is the Classification Maps which identify the relationship between designated uses and the applicable Standards and Criteria for each class of surface and ground water. Although federal law requires adoption of Water Quality Standards for surface waters, Water Quality Standards for ground waters are not subject to federal review and approval. Connecticut's Standards recognize that surface and ground waters are interrelated and address the issue of competing use of ground waters for drinking and for waste water assimilation. These Standards specifically identify ground water quality goals, designated uses and those measures necessary for protection of public and private drinking water supplies; the principal use of Connecticut ground waters. These three elements comprise the Water Quality Standards and are adopted using the public participation procedures contained in Section 22a-426 of the Connecticut General Statutes. The Standards, Criteria and Maps are reviewed and revised roughly every three years. Any change is considered a revision requiring public participation. The public participation process consists of public meetings held at various locations around the State, notification of all chief elected officials, notice in the Connecticut Law Journal and a public hearing. The Classification Maps are the subject of separate public hearings which are held for the adoption of the map covering each major drainage basin in the State. The Water Quality Standards and Criteria documents are available on the DEP website, www.ct.gov/dep. The Surface Water Quality Classifications is a line and polygon feature-based layer is based primarily on the Adopted Water Quality Classifications Map Sheets. The map sheets were hand-drawn at 1:50,000-scale in ink on Mylar which had been underprinted with a USGS topographic map base. The information collected and compiled by major drainage basin from 1986 to 1997. Ground Water Quality Classifications are defined separately in a data layer comprised of polygon features. The Ground and Surface Water Quality Classifications do not represent conditions at any one particular point in time. During the conversion from a manually maintained to a digitally maintained statewide data layer the Housatonic River and Southwest Coastal Basins information was updated. A revision to the Water Quality Standards adopted February 25, 2011. These revisions included eliminating surface water quality classes C, D, SC, SD and all the two tiered classifications. The two tiered classifications included a classification for the present condition and a second classification for the designated use. All the tiered classifications were changed to the designated use classification. For example, classes B/A and C/A were changed to class A. The geographic extent of each the classification was not changed. The publication date of the digital data reflects the official adoption date of the most recent Water Quality Classifications. Within the data layer the adoption dates are: Housatonic and Southwest Basins - March 1999, Connecticut and South Central Basins - February 1993, Thames and Southeast Basins - December 1986. Ground water quality classifications may be separately from the surface water quality classifications under specific circumstances. This data is updated.

The Well Log Tracking System (WELTS) contains water well construction and lithologic information submitted to the Division of Mining, Land and Water, Alaska Hydrologic Survey by water well contractors as required per Alaska State Statute 41.08.020(b4) authority delegated to the Alaska Hydrologic Survey per Department Order 115, require of water well contractors, the filing with it of basic water and aquifer data normally obtained, including but not limited to well location, estimated elevation, well driller's logs, pumping tests and flow measurements, and water quality determinations. Additionally, per Alaska Administrative Code, Title 11 Natural Resources, Part 6 Lands, Chapter 93 Water Management, Article 2 Appropriation and Use of Water 11 AAC 93.140(a):

For a drilled, driven, jetted, or augered well constructed, the water well contractor or a person who constructs the well shall file a report within 45 days after completion with both the property owner and the department. The report must contain the following information as applicable: (1) the method of construction; (2) the type of fluids used for drilling; (3) the location of the well; (4) an accurate log of the soil and rock formations encountered and the depths at which the formations occur; (5) the depth of the casing; (6) the height of the casing above ground; (7) the depth and type of grouting; (8) the depth of any screens; (9) the casing diameter; (10) the casing material; (11) the depth of perforation or opening in the casing; (12) the well development method; (13) the total depth of the well; (14) the depth of the static water level; (15) the anticipated use of the well; (16) the maximum well yield; (17) the results of any well yield, aquifer, or drawdown test that was conducted; (18) if the water well contractor or person who constructs the well installs a pump at the time of construction, the depth of the pump intake and the rated pump capacity at that depth. (b) When the drill rig is removed from the well site, the well must be sealed with a sanitary seal and a readily accessible means provided to allow for monitoring of the static water level in the well. (c) A hand-dug well that is permanently decommissioned shall be filled by the land owner to a point 12 in above the existing ground level with well-compacted impermeable material. (d) A well, other than a hand-dug well, that is permanently decommissioned by the owner of the well must comply with the requirements of 18 AAC 80.015(e) . (e) If the department believes that an encounter of oil, gas, or other hazardous substance is likely to result from well drilling, the department will notify the Alaska Oil and Gas Conservation Commission, and the provisions of AS 31.05.030 (g) may apply. (f) The department will notify the Department of Environmental Conservation of any permanently abandoned well that may contaminate water of the state under the provisions of 18 AAC 80. (g) Information required by (a) of this section is required for any water well that has been deepened, modified, or abandoned, and for any water supply well or water well that is used for monitoring, observation, or aquifer testing, including a dry or low-yield water well that is not used. This data characterizes the geographic representation of well logs within the State of Alaska contained in the Well Log Tracking System. The shape file was developed using well location information submitted with well logs. Well locations represented by a gold star symbol, represent the approximate (centroid) location, and may represent a cluster of wells. Well locations represented by a blue circle symbol, represent wells submitted with latitude and longitude coordinates. Each feature has an associated attribute record, including a Well Log Tracking System identification number which serves as an index to case-file information. Those requiring more information regarding WELTS should contact the Alaska Department of Natural Resources Alaska Hydrologic Survey directly.

National Hydrography Dataset NHDFlowline layer with spatial representation of existing water uses defined in Title 25 Environmental Protection, Department of Environmental Protection, Chapter 93, Water Quality Standards. The Pennsylvania Code just cited provides a definition for distinguishing between designated and existing use classification. This GIS layer displays these uses spatially on an interactive stream map. Public users can drill down to locations on the map to view and map the existing uses of the water bodies of interest. The layer can also be used in conjunction with other spatially referenced data for spatial analyses.

See full Data Guide here. Surface Water Quality Classifications Set:

This dataset is a line and a polygon feature-based layer compiled at 1:24,000 scale that includes water quality classification information for surface waters for all areas of the State of Connecticut. The Surface Water Quality Classifications and the Ground Water Quality Classifications are usually presented together as a depiction of water quality classifications in Connecticut. Water Quality Classifications, based on the adopted Water Quality Standards, establish designated uses for surface and ground waters and identify the criteria necessary to support those uses. This edition of the Surface Water Quality Classifications is based on the Water Quality Standards adopted on February 25, 2011. Surface Water means the waters of Long Island Sound, its harbors, embayments, tidal wetlands and creeks; rivers and streams, brooks, waterways, lakes, ponds, marshes, swamps, bogs, federal jurisdictional wetlands, and other natural or artificial, public or private, vernal or intermittent bodies of water, excluding groundwater. The surface waters includes the coastal waters as defined by Section 22a-93 of the Connecticut General Statutes and means those waters of Long Island Sound and its harbors, embayments, tidal rivers, streams and creeks, which contain a salinity concentration of at least five hundred parts per million under the low flow stream conditions as established by the Commissioner of the Department of Environmental Protection. The Surface Water Quality Classes are AA, A, B, SA and SB. All surface waters not otherwise classified are considered as Class A if they are in Class GA Ground Water Quality Classifications areas. Class AA designated uses are: existing or proposed drinking water, fish and wildlife habitat, recreational use (maybe restricted), agricultural and industrial supply. Class A designated uses are: potential drinking water, fish and wildlife habitat, recreational use, agricultural and industrial supply. Class B designated uses are: fish and wildlife habitat, recreational use, agricultural and industrial supply and other legitimate uses including navigation. Class B* surface water is a subset of Class B waters and is identical in all ways to the designated uses, criteria and standards for Class B waters except for the restriction on direct discharges. Coastal water and marine classifications are SA and SB. Class SA designated uses are: marine fish, shellfish and wildlife habitat, shellfish harvesting for direct human consumption, recreation and other legitimate uses including navigation. Class SB designated uses are: marine fish, shellfish and wildlife habitat, shellfish harvesting for transfer to approved areas for purification prior to human consumption, recreation and other legitimate uses including navigation. There are three elements that make up the Water Quality Standards which is an important element in Connecticut's clean water program. The first of these is the Standards themselves. The Standards set an overall policy for management of water quality in accordance with the directive of Section 22a-426 of the Connecticut General Statutes. The policies can be simply summarized by saying that the Department of Environmental Protection shall: Protect surface and ground waters from degradation, Segregate waters used for drinking from those that play a role in waste assimilation, Restore surface waters that have been used for waste assimilation to conditions suitable for fishing and swimming, Restore degraded ground water to protect existing and designated uses, Provide a framework for establishing priorities for pollution abatement and State funding for clean up, Adopt standards that promote the State's economy in harmony with the environment. The second element is the Criteria, the descriptive and numerical standards that describe the allowable parameters and goals for the various water quality classifications. The final element is the Classification Maps which identify the relationship between designated uses and the applicable Standards and Criteria for each class of surface and ground water. Although federal law requires adoption of Water Quality Standards for surface waters, Water Quality Standards for ground waters are not subject to federal review and approval. Connecticut's Standards recognize that surface and ground waters are interrelated and address the issue of competing use of ground waters for drinking and for waste water assimilation. These Standards specifically identify ground water quality goals, designated uses and those measures necessary for protection of public and private drinking water supplies; the principal use of Connecticut ground waters. These three elements comprise the Water Quality Standards and are adopted using the public participation procedures contained in Section 22a-426 of the Connecticut General Statutes. The Standards, Criteria and Maps are reviewed and revised roughly every three years. Any change is considered a revision requiring public participation. The public participation process consists of public meetings held at various locations around the State, notification of all chief elected officials, notice in the Connecticut Law Journal and a public hearing. The Classification Maps are the subject of separate public hearings which are held for the adoption of the map covering each major drainage basin in the State. The Water Quality Standards and Criteria documents are available on the DEP website, www.ct.gov/dep. The Surface Water Quality Classifications is a line and polygon feature-based layer is based primarily on the Adopted Water Quality Classifications Map Sheets. The map sheets were hand-drawn at 1:50,000-scale in ink on Mylar which had been underprinted with a USGS topographic map base. The information collected and compiled by major drainage basin from 1986 to 1997. Ground Water Quality Classifications are defined separately in a data layer comprised of polygon features. The Ground and Surface Water Quality Classifications do not represent conditions at any one particular point in time. During the conversion from a manually maintained to a digitally maintained statewide data layer the Housatonic River and Southwest Coastal Basins information was updated. A revision to the Water Quality Standards adopted February 25, 2011. These revisions included eliminating surface water quality classes C, D, SC, SD and all the two tiered classifications. The two tiered classifications included a classification for the present condition and a second classification for the designated use. All the tiered classifications were changed to the designated use classification. For example, classes B/A and C/A were changed to class A. The geographic extent of each the classification was not changed. The publication date of the digital data reflects the official adoption date of the most recent Water Quality Classifications. Within the data layer the adoption dates are: Housatonic and Southwest Basins - March 1999, Connecticut and South Central Basins - February 1993, Thames and Southeast Basins - December 1986. Ground water quality classifications may be separately from the surface water quality classifications under specific circumstances. This data is updated.