The Vermont Water Quality Standards (VTWQS) are rules intended to achieve the goals of the Vermont Surface Water Strategy, as well as the objective of the federal Clean Water Act which is to restore and maintain the chemical, physical, and biological integrity of the Nation's water. The classification of waters is in included in the VTWQS. The classification of all waters has been established by a combination of legislative acts and by classification or reclassification decisions issued by the Water Resources Board or Secretary pursuant to 10 V.S.A. � 1253. Those waters reclassified by the Secretary to Class A(1), A(2), or B(1) for any use shall include all waters within the entire watershed of the reclassified waters unless expressly provided otherwise in the rule. All waters above 2,500 feet altitude, National Geodetic Vertical Datum, are designated Class A(1) for all uses, unless specifically designated Class A(2) for use as a public water source. All waters at or below 2,500 feet altitude, National Geodetic Vertical Datum, are designated Class B(2) for all uses, unless specifically designated as Class A(1), A(2), or B(1) for any use.

Click to downloadClick for metadataService URL: https://gis.dnr.wa.gov/site2/rest/services/Public_Forest_Practices/WADNR_PUBLIC_FP_Water_Type/MapServer/4For large areas, like Washington State, download as a file geodatabase. Large data sets like this one, for the State of Washington, may exceed the limits for downloading as shape files, excel files, or KML files. For areas less than a county, you may use the map to zoom to your area and download as shape file, excel or KML, if that format is desired.The DNR Forest Practices Wetlands Geographic Information System (GIS) Layer is based on the National Wetlands Inventory (NWI). In cooperation with the Washington State Department of Ecology, DNR Forest Practices developed a systematic reclassification of the original USFWS wetlands codes into WAC 222-16-035 types. The reclassification was done in 1995 according to the Forest Practice Rules in place at the time. The WAC's for defining wetlands are 222-16-035 and 222-16-050.The DNR Forest Practices Wetlands Geographic Information System (GIS) Layer is based on the National Wetlands Inventory (NWI). In cooperation with the Washington State Department of Ecology, DNR Forest Practices developed a systematic reclassification of the original USFWS wetlands codes into WAC 222-16-035 types. The reclassification was done in 1995 according to the Forest Practice Rules in place at the time. The WAC's for defining wetlands are 222-16-035 and 222-16-050.It is intended that these data be only a first step in determining whether or not wetland issues have been or need to be addressed in an area. The DNR Forest Practices Division and the Department of Ecology strongly supports the additional use of hydric soils (from the GIS soils layer) to add weight to the call of 'wetland'. Reports from the Department of Ecology indicate that these data may substantially underestimate the extent of forested wetlands. Various studies show the NWI data is 25-80% accurate in forested areas. Most of these data were collected from stereopaired aerial photos at a scale of 1:58,000. The stated accuracy is that of a 1:24,000 map, or plus or minus 40 feet. In addition, some parts of the state have data that are 30 years old and only a small percentage have been field checked. Thus, for regulatory purposes, the user should not rely solely on these data. On-the-ground checking must accompany any regulatory call based on these data.The reclassification is based on the USFWS FWS_CODE. The FWS_CODE is a concatenation of three subcomponents: Wetland system, class, and water regime. Forest Practices further divided the components into system, subsystem, class, subclass, water regime, special modifiers, xclass, subxclass, and xsystem. The last three items (xsomething) are for wetland areas which do not easily lend themselves to one class alone. The resulting classification system uses two fields: WLND_CLASS and WLND_TYPE. WLND_CLASS indicates whether the polygon is a forested wetland (F), open water (O), or a vegetated wetland (W). WLND_TYPE, indicates whether the wetland is a type A (1), type B (2), or a generic wetland (3) that doesn't fit the categories for A or B type wetlands. WLND_TYPE = 0 (zero) is used where WLND_CLASS = O (letter "O").

The wetland polygon is classified as F, forested wetland; O, open water; or W, vegetated wetland depending on the following FWS_CODE categories: F O W --------------------------------------------------- Forested Open Vegetated Wetland Water Wetland --------------------------------------------PFO* POW PUB5 E2FO PRB* PML2 PUB1-4 PEM* PAB* L2US5 PUS1-4 L2EM2 PFL* PSS* L1RB* PML1 L1UB*
L1AB* L1OW L2RB* L2UB* L2AB* L2RS* L2US1-4 L2OW

• indicates inclusion of the subcategory (ie. PEM* includes PEM1F, PEM1FB, etc.).

DNR FOREST PRACTICES WETLANDS DATASET ON FPARS Internet Mapping Website: The FPARS Resource Map and Water Type Map display Forested, Type A, Type B, and "other" wetlands. Open water polygons are not displayed on the FPARS Resource Map and Water Type Map in an attempt to minimize clutter. The following code combinations are found in the DNR Forest Practices wetlands dataset:

WLND_CLASS WLND_TYPE wetland polygon classification F 3 Forested wetland as defined in WAC 222-16-035 O 0 *NWI open water (not displayed on FPARS Resource or Water Type Maps) W 1 Type A Wetland as defined in WAC 222-16-035 W 2 Type B Wetland as defined in WAC 222-16-035 W 3 other wetland

• NWI open water polygons are indicated by WLND_CLASS = O and WLND_TYPE = 0. Open water is used in the USFWS and WAC 222-16-035 classification system. These open water polygons are not included in the FPARS Resource Map and Water Type Map views of this dataset in an attempt to minimize clutter on the FPARS maps.

Please note that this dataset is not an official City of Toronto land use dataset. It was created for personal and academic use using City of Toronto Land Use Maps (2019) found on the City of Toronto Official Plan website at https://www.toronto.ca/city-government/planning-development/official-plan-guidelines/official-plan/official-plan-maps-copy, along with the City of Toronto parcel fabric (Property Boundaries) found at https://open.toronto.ca/dataset/property-boundaries/ and Statistics Canada Census Dissemination Blocks level boundary files (2016). The property boundaries used were dated November 11, 2021. Further detail about the City of Toronto's Official Plan, consolidation of the information presented in its online form, and considerations for its interpretation can be found at https://www.toronto.ca/city-government/planning-development/official-plan-guidelines/official-plan/ Data Creation Documentation and Procedures Software Used The spatial vector data were created using ArcGIS Pro 2.9.0 in December 2021. PDF File Conversions Using Adobe Acrobat Pro DC software, the following downloaded PDF map images were converted to TIF format. 9028-cp-official-plan-Map-14_LandUse_AODA.pdf 9042-cp-official-plan-Map-22_LandUse_AODA.pdf 9070-cp-official-plan-Map-20_LandUse_AODA.pdf 908a-cp-official-plan-Map-13_LandUse_AODA.pdf 978e-cp-official-plan-Map-17_LandUse_AODA.pdf 97cc-cp-official-plan-Map-15_LandUse_AODA.pdf 97d4-cp-official-plan-Map-23_LandUse_AODA.pdf 97f2-cp-official-plan-Map-19_LandUse_AODA.pdf 97fe-cp-official-plan-Map-18_LandUse_AODA.pdf 9811-cp-official-plan-Map-16_LandUse_AODA.pdf 982d-cp-official-plan-Map-21_LandUse_AODA.pdf Georeferencing and Reprojecting Data Files The original projection of the PDF maps is unknown but were most likely published using MTM Zone 10 EPSG 2019 as per many of the City of Toronto's many datasets. They could also have possibly been published in UTM Zone 17 EPSG 26917 The TIF images were georeferenced in ArcGIS Pro using this projection with very good results. The images were matched against the City of Toronto's Centreline dataset found here The resulting TIF files and their supporting spatial files include: TOLandUseMap13.tfwx TOLandUseMap13.tif TOLandUseMap13.tif.aux.xml TOLandUseMap13.tif.ovr TOLandUseMap14.tfwx TOLandUseMap14.tif TOLandUseMap14.tif.aux.xml TOLandUseMap14.tif.ovr TOLandUseMap15.tfwx TOLandUseMap15.tif TOLandUseMap15.tif.aux.xml TOLandUseMap15.tif.ovr TOLandUseMap16.tfwx TOLandUseMap16.tif TOLandUseMap16.tif.aux.xml TOLandUseMap16.tif.ovr TOLandUseMap17.tfwx TOLandUseMap17.tif TOLandUseMap17.tif.aux.xml TOLandUseMap17.tif.ovr TOLandUseMap18.tfwx TOLandUseMap18.tif TOLandUseMap18.tif.aux.xml TOLandUseMap18.tif.ovr TOLandUseMap19.tif TOLandUseMap19.tif.aux.xml TOLandUseMap19.tif.ovr TOLandUseMap20.tfwx TOLandUseMap20.tif TOLandUseMap20.tif.aux.xml TOLandUseMap20.tif.ovr TOLandUseMap21.tfwx TOLandUseMap21.tif TOLandUseMap21.tif.aux.xml TOLandUseMap21.tif.ovr TOLandUseMap22.tfwx TOLandUseMap22.tif TOLandUseMap22.tif.aux.xml TOLandUseMap22.tif.ovr TOLandUseMap23.tfwx TOLandUseMap23.tif TOLandUseMap23.tif.aux.xml TOLandUseMap23.tif.ov Ground control points were saved for all georeferenced images. The files are the following: map13.txt map14.txt map15.txt map16.txt map17.txt map18.txt map19.txt map21.txt map22.txt map23.txt The City of Toronto's Property Boundaries shapefile, "property_bnds_gcc_wgs84.zip" were unzipped and also reprojected to EPSG 26917 (UTM Zone 17) into a new shapefile, "Property_Boundaries_UTM.shp" Mosaicing Images Once georeferenced, all images were then mosaiced into one image file, "LandUseMosaic20211220v01", within the project-generated Geodatabase, "Landuse.gdb" and exported TIF, "LandUseMosaic20211220.tif" Reclassifying Images Because the original images were of low quality and the conversion to TIF made the image colours even more inconsistent, a method was required to reclassify the images so that different land use classes could be identified. Using Deep learning Objects, the images were re-classified into useful consistent colours. Deep Learning Objects and Training The resulting mosaic was then prepared for reclassification using the Label Objects for Deep Learning tool in ArcGIS Pro. A training sample, "LandUseTrainingSamples20211220", was created in the geodatabase for all land use types as follows: Neighbourhoods Insitutional Natural Areas Core Employment Areas Mixed Use Areas Apartment Neighbourhoods Parks Roads Utility Corridors Other Open Spaces General Employment Areas Regeneration Areas Lettering (not a land use type, but an image colour (black), used to label streets). By identifying the letters, it then made the reclassification and vectorization results easier to clean up of unnecessary clutter caused by the labels of streets. Reclassification Once the training samples were created and saved, the raster was then reclassified using the Image Classification Wizard tool in ArcGIS Pro, using the Support...

Pursuant to the Groundwater Protection Act section 485-C:5, all groundwater shall be classified for the purpose of prescribing protections and management practices. This layer aptially represents the area(s) listed within RSA, including areas with greater state and local protections. Classifications do not necessarily reflect existing water quality.Reclassification to GA1 requires the entity to develop a Potential Contaminat Source (PCS) management program that regularly provides notice and information concerning best management practices and conducts inspections of PCS facilities.

The African surficial lithology dataset is a map of parent materials - a mix of bedrock geology and unconsolidated surficial materials classes. The goal was to produce a map that reflected the key geological parent materials which act as primary determinants in the distribution of African vegetation /ecosystems. It is a compilation and reclassification of twelve digital geology, soil and lithology databases. Nineteen surficial lithology classes were delineated in Africa based on geology, soil and landform. Whenever available, multiple sources of ancillary digital data, hard copy maps and literature were reviewed to assist in the reclassification of the source data to the African surficial lithology classification. Of particular note, due to the varying spatial and classification resolutions of the geologic source data, the African surficial lithology map varies in spatial complexity and classification detail across Africa. Purpose: The African surficial lithology data was developed as a primary input dataset for an African Ecological Footprint mapping project undertaken by the U.S. Geological Survey and The Nature Conservancy. The project used a biophysical stratification approach which was based on mapping the major structural components of ecosystems (land surface forms, lithology, isobioclimates and biogeographic regions). These unique physical components, which are considered as the fundamental building blocks of ecosystems, were reviewed by regional vegetation and landscape ecology experts and used in a classification and regression tree (CART) inductive model to map intermediate scale African ecosystems.

A Green Infrastructure map county of Prince William, VA was developed to provide quantification of canopy and associated data for environmental monitoring. Digital aerial imagery, collected for the National Agriculture Imagery (NAIP) program at 1 meter resolution was classified to a Green Infrastructure Level 1 classification scheme with the following classes: 1) Non Woody Vegetation, 2)Woody Vegetation, 3) Impervious, 4) Water and 5) Bare Soil. The image was classified using Classification and Regression Tree techniques (CART analysis) and raster modeling. The classification accuracy assessment gave an overall accuracy of 95.25%This 2012 update is the result of a change detection process which buillt on the original 2008 classification. Changed areas were updated, and several other classification scheme changes were made, such as the reclassification of pools as impervious surfaces.