City of Aurora, Colorado zoning. The City of Aurora, Colorado sits in three different counties: Adams County, Arapahoe County, and Douglas County and lies just east of the City and County of Denver. The city's population was estimated at 381,000 on July 1, 2019.

The City of Fort Collins GIS Online Mapping tool (FCMaps) provide current, timely and local geographic information in an easy to use viewer. FCMaps is mobile friendly and will work well on tablets and smartphones as well as a desktop browser.

Here you will find areas zoned for marijuana business in Fort Collins.

The City of Fort Collins GIS Online Mapping tool (FCMaps) provide current, timely and local geographic information in an easy to use viewer. FCMaps is mobile friendly and will work well on tablets and smartphones as well as a desktop browser.

Here you will find areas zoned for short-term rentals in Fort Collins.

Fort Collins GIS Zoning dataset on ESRI's Open Data Portal.

Geospatial data about El Paso County, Colorado Zoning. Export to CAD, GIS, PDF, CSV and access via API.

Zoning districts of Kiowa, Colorado.NOTE: This dataset is NOT authoritative.

This web map displays discrete tidal zoning generated by the National Ocean Service (NOS) Center for Operational Oceanographic Products and Services (CO-OPS). Zoned tides, relative to a tidal datum, can be constructed by applying time and range correctors to observed water level data from a NOAA tide station. These correctors and the recommended tide stations are contained within discrete tide zones. Each zone was constructed with an ideal uncertainty of less than 0.45m at 95% Confidence Interval.Content: Discrete Tide Zones: Discrete tide zones delineate geographic areas of similar tidal characteristics. For each discrete zone, a tide curve can be constructed by applying a time (AvgTimeCorr) and range (RangeRatio) corrector to the observed water level data for the zone's assigned control water level station. Zones are grouped by geographic region. Table attributes contain tidal information for each zone:ControlStn: Operating water level station referenced by the zone AvgTimeCorr: Average of high and low tide time corrections in 6 minute intervalsRangeRatio: Range ratio (multiplier used to scale the tidal value read for the observation file)ControlStn2 (where available): Alternate operating water level station referenced by the zoneAvgTimeCorr2 (where available): Alternate average of high and low tide time corrections in 6 minute intervalsRangeRatio2 (where available): Alternate range ratio (multiplier used to scale the tidal value read for the observation file)NOAA CO-OPS Active Water Level Stations (REST service on the NOAA IDP): Layer represents the geographic locations at which water level observations are presently being collected. "Water level" is defined as the height of the water surface relative to a specific datum (base elevation). Most stations with water level observations provide readings every 6 minutes. CO-OPS measures water levels at over 200 tidal and non-tidal stations along the coast of the United States and its territories and around the Great Lakes. "Tide" is defined as the periodic rise and fall of a body of water resulting from gravitational interactions between Sun, Moon, and Earth. The time series on the CO-OPS website that are associated with these point locations contain both verified and unverified data. Unverified, or raw, data have not been subjected to the National Ocean Service's quality control or quality assurance procedures and do not meet the criteria and standards of official National Ocean Service data. They are released for limited public use as preliminary data to be used only with appropriate caution. More information can be found at https://tidesandcurrents.noaa.gov/stations.html?type=Water+Levels.NOAA CO-OPS Historic/Active Water Level Stations (REST service on the NOAA IDP): Layer represents any geographic location at which tidal (water level) observations have been collected and verified, including stations presently collecting observations. "Tide" is defined as the periodic rise and fall of a body of water resulting from gravitational interactions between Sun, Moon, and Earth. "Water level" is defined as the height of the water surface relative to a specific datum (reference elevation). Most stations with water level observations provide readings every 6 minutes. CO-OPS measures water levels at over 200 stations along the coast of the United States and its territories and around the Great Lakes. More information can be found at https://tidesandcurrents.noaa.gov/stations.html?type=Historic+Water+LevelsPlease download data using the following method:To export data, click on one of the “CO-OPS Regional Zoning” layers below to be taken to the hosted Feature Layer page. Here you can export the layer of your choice to Shapefile, CSV, FGDB, GeoJSON or Feature Collection by clicking on the "Export To" drop-down menu.Note: Please be aware that you must create a free ArcGIS Online account before you can download the data.Tide Zone Water Level Correction for Hydrographic Data: To create a tide zone correction file for use with hydrographic processing software you will need the following information from the shapefiles contained in this map:Name (OBJECTID) and number of vertices for each zone that overlaps your area of coverageCoordinates of all vertices within each tide zone polygonReference/Control tide station (ControlStn or ControlStn2) for each zoneAverage tide time corrector (AvgTimeCorr or AvgTimeCorr2) and tide zone range ratio (RangeRatio or RangeRatio2)Reference/Control tide station name and coordinatesSix minute preliminary and verified water level data may be retrieved in one month increments over the internet from the CO-OPS web services at https://opendap.co-ops.nos.noaa.gov/axis/ by clicking on “Six Minute Data”.More Resources: https://tidesandcurrents.noaa.gov/hydro.html

A map showing zoning classifications in Erie, Colorado.All zoning designations are displayed in different colors, and are labeled with an abbreviation for the zone's land use type. The full land use names can be found in the legend, which also displays the zone colors and the land use abbreviations. There are 22 land use types represented the map, which shows the land diversity present in Erie.

Cadastral service for Clear Creek County.NOTE: Parcels and Account Owner tables are updated MWF. Due to the view layer created from this service, no other data in this service is currently being updated as of 1/6/2025.

This digital map shows the geographic extent of rock stratigraphic units (formations) as compiled by Colton in 1976 under the Front Range Urban Corridor Geology Program. Colton used his own geologic mapping and previously published geologic maps to compile one map having a single classification of geologic units. The resulting published color paper map (USGS Map I-855-G, Colton, 1978) was intended for land-use planning and to depict the regional geology. In 1997-1999, another USGS project designed to address urban growth issues was undertaken. This project, the USGS Front Range Infrastructure Resources Project, undertook to digitize Colton's map at 1:100,000 scale, making it useable in Geographical Information Systems (GIS). That product is described here. In general, the digitized map depicts in its western part Precambrian igneous and metamorphic rocks, Pennsylvanian and younger sedimentary rock units, major faults, and brecciated zones along an eastern strip (5-20 km wide) of ...

GIS data and locations of zoning areas in El Paso county in 2019.

Vector polygon map data of city limits from Aspen, Colorado containing 3 features.

City limits GIS (Geographic Information System) data provides valuable information about the boundaries of a city, which is crucial for various planning and decision-making processes. Urban planners and government officials use this data to understand the extent of their jurisdiction and to make informed decisions regarding zoning, land use, and infrastructure development within the city limits.

By overlaying city limits GIS data with other layers such as population density, land parcels, and environmental features, planners can analyze spatial patterns and identify areas for growth, conservation, or redevelopment. This data also aids in emergency management by defining the areas of responsibility for different emergency services, helping to streamline response efforts during crises..

This city limits data is available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

Infrastructure, such as roads, airports, water and energy transmission and distribution facilities, sewage treatment plants, and many other facilities, is vital to the sustainability and vitality of any populated area. Rehabilitation of existing and development of new infrastructure requires three natural resources: natural aggregate (stone, sand, and gravel), water, and energy http://rockyweb.cr.usgs.gov/frontrange/overview.htm.

The principal goals of the U.S. Geological Survey (USGS) Front Range Infrastructure Resources Project (FRIRP) were to develop information, define tools, and demonstrate ways to: (1) implement a multidisciplinary evaluation of the distribution and quality of a region's infrastructure resources, (2) identify issues that may affect availability of resources, and (3) work with cooperators to provide decision makers with tools to evaluate alternatives to enhance decision-making. Geographic integration of data (geospatial databases) can provide an interactive tool to facilitate decision-making by stakeholders http://rockyweb.cr.usgs.gov/frontrange/overview.htm.

Zoning map of the City of Boulder, CO

This layer contains boundaries and attributes of zoning in Itasca County

This map data layer represents the zoning boundary for the City of Wheat Ridge, CO. The mapped geographic area includes the 9.56 square mile City Planning Jurisdiction in central Jefferson County in Colorado. The zoning boundaries data layer is governed by ordinance and is only changed accordingly

The Cumberland County GIS Data Viewer provides the general public with parcel, zoning, hydrology, soils, utilities and topographic data. You can search for a specific address, street name, parcel number (PIN), or by the owner's name.

Data in this feature class shows the current zoning for all parcels in Sandy Springs. This dataset is used to create the Official Zoning Map for the City of Sandy Springs, GA. Details regarding the Zoning regulations and Development code for the city can be found on the city's website. Layers used for the Community Development GIS viewer. Caution! This layer is used in the Community Development public application. Do not delete this unless the Zoning Layers in that application has been re-mapped to another source.

Visit the Enterprise Zone Program website with any questionsThis web layer contains sub layers for the following Census geographies: counties, tracts, block groups, Census designated places, and county subdivisions. In addition, there is a layer displaying which Census blocks have 'graduated out' - meaning they do not qualify based on any of the above geographies but lie in a current Enterprise Zone.

These web layers display discrete tidal zoning generated by the National Ocean Service (NOS) Center for Operational Oceanographic Products and Services (CO-OPS). Zoned tides, relative to a tidal datum, can be constructed by applying time and range correctors to observed water level data from a NOAA tide station. These correctors and the recommended tide stations are contained within discrete tide zones. Each zone was constructed with an ideal uncertainty of less than 0.45m at 95% Confidence Interval.Content: Discrete Tide Zones: Discrete tide zones delineate geographic areas of similar tidal characteristics. For each discrete zone, a tide curve can be constructed by applying a time (AvgTimeCorr) and range (RangeRatio) corrector to the observed water level data for the zone's assigned control water level station. Zones are grouped by geographic region. Table attributes contain tidal information for each zone:ControlStn: Operating water level station referenced by the zone AvgTimeCorr: Average of high and low tide time corrections in 6 minute intervalsRangeRatio: Range ratio (multiplier used to scale the tidal value read for the observation file)ControlStn2 (where available): Alternate operating water level station referenced by the zoneAvgTimeCorr2 (where available): Alternate average of high and low tide time corrections in 6 minute intervalsRangeRatio2 (where available): Alternate range ratio (multiplier used to scale the tidal value read for the observation file)Download Layers to Shapefile, CSV, FGDB, GeoJSON or Feature Collection by clicking on the "Export To" drop-down menu below.(Copy/paste the following link into your browser to access the authoritative data source: ftp://tidepool.nos.noaa.gov/pub/outgoing/HPT/CO-OPS_Regional_Zoning/)Note: Please be aware that you must create a free ArcGIS Online account before you can download the data.Tide Zone Water Level Correction for Hydrographic Data: To create a tide zone correction file for use with hydrographic processing software you will need the following information from the shapefiles contained in this map:Name (OBJECTID) and number of vertices for each zone that overlaps your area of coverageCoordinates of all vertices within each tide zone polygonReference/Control tide station (ControlStn or ControlStn2) for each zoneAverage tide time corrector (AvgTimeCorr or AvgTimeCorr2) and tide zone range ratio (RangeRatio or RangeRatio2)Reference/Control tide station name and coordinatesSix minute preliminary and verified water level data may be retrieved in one month increments over the internet from the CO-OPS web services at https://opendap.co-ops.nos.noaa.gov/axis/ by clicking on “Six Minute Data”.More Resources: https://tidesandcurrents.noaa.gov/hydro.html