In past 24 hours, USA, North America had 1,151 new cases, 7 deaths and 10,109 recoveries.

Content

This dataset contains Covid-19 data of all the states in USA as on September 15, 2023

Attribute Information

• USA State - States of USA
• Total Cases - Total number of Covid-19 cases
• Total Deaths - Total number of Deaths
• Total Recovered - Total number of recovered cases
• Active Cases - Total number of Active cases
• Tot Cases/ 1M pop - Total Cases per 1 million of the population
• Deaths/ 1M pop - Total Deaths per 1 million of the population
• Total Tests - Total number of Covid tests done
• Tests/ 1M pop - Covid tests per 1 million of the population
• Population - Population of the states

Source

Link : https://www.worldometers.info/coronavirus/country/us/

Other Updated Covid Datasets

Link : https://www.kaggle.com/anandhuh/datasets

Thank You

Based on a comparison of coronavirus deaths in 210 countries relative to their population, Peru had the most losses to COVID-19 up until July 13, 2022. As of the same date, the virus had infected over 557.8 million people worldwide, and the number of deaths had totaled more than 6.3 million. Note, however, that COVID-19 test rates can vary per country. Additionally, big differences show up between countries when combining the number of deaths against confirmed COVID-19 cases. The source seemingly does not differentiate between "the Wuhan strain" (2019-nCOV) of COVID-19, "the Kent mutation" (B.1.1.7) that appeared in the UK in late 2020, the 2021 Delta variant (B.1.617.2) from India or the Omicron variant (B.1.1.529) from South Africa.

The difficulties of death figures

This table aims to provide a complete picture on the topic, but it very much relies on data that has become more difficult to compare. As the coronavirus pandemic developed across the world, countries already used different methods to count fatalities, and they sometimes changed them during the course of the pandemic. On April 16, for example, the Chinese city of Wuhan added a 50 percent increase in their death figures to account for community deaths. These deaths occurred outside of hospitals and went unaccounted for so far. The state of New York did something similar two days before, revising their figures with 3,700 new deaths as they started to include “assumed” coronavirus victims. The United Kingdom started counting deaths in care homes and private households on April 29, adjusting their number with about 5,000 new deaths (which were corrected lowered again by the same amount on August 18). This makes an already difficult comparison even more difficult. Belgium, for example, counts suspected coronavirus deaths in their figures, whereas other countries have not done that (yet). This means two things. First, it could have a big impact on both current as well as future figures. On April 16 already, UK health experts stated that if their numbers were corrected for community deaths like in Wuhan, the UK number would change from 205 to “above 300”. This is exactly what happened two weeks later. Second, it is difficult to pinpoint exactly which countries already have “revised” numbers (like Belgium, Wuhan or New York) and which ones do not. One work-around could be to look at (freely accessible) timelines that track the reported daily increase of deaths in certain countries. Several of these are available on our platform, such as for Belgium, Italy and Sweden. A sudden large increase might be an indicator that the domestic sources changed their methodology.

Where are these numbers coming from?

The numbers shown here were collected by Johns Hopkins University, a source that manually checks the data with domestic health authorities. For the majority of countries, this is from national authorities. In some cases, like China, the United States, Canada or Australia, city reports or other various state authorities were consulted. In this statistic, these separately reported numbers were put together. For more information or other freely accessible content, please visit our dedicated Facts and Figures page.

Context

The files provided are daily datasets that I scraped from the COVID-19 tracking website Worldometer over the course of 3 days—08/04/21–08/06/21. The dates don't necessarily have to contain the most recent data because that is not the intent of this dataset.

Inspiration

For me, I find making data visualizations very satisfying. Seeing a neat and tidy graph come out of an enormous CSV file is very inspirational to me. The goal is simply to use this data to make visualizations of how COVID-19 is continuing to affect each country throughout the world.

The Data

I made a pandas DataFrame out of the table on the website, and I included all 21 of their columns. Descriptions for each column are provided below.

• Country: String. Name of each country.
• TotalCases: Integer. Total number of cases
• NewCases: Integer. Number of new additional cases
• TotalDeaths: Integer. Total number of deaths due to COVID-19
• NewDeaths: Integer. Number of new additional deaths
• TotalRecovered: Integer. Total number of patients recovered from COVID-19
• NewRecovered: Integer. Number of new additional recovered patients
• ActiveCases: Integer. Number of current active cases
• Critical: Integer. Number of critically ill patients
• Tot Cases/1M pop: Integer. Total cases per 1M (one million) population
• Deaths/1M pop: Float. Deaths per 1M population
• TotalTests: Integer Total number of COVID-19 tests administered
• Tests/1M pop: String. Tests per 1M population
• Population: Integer. Population of country
• Continent: String. Continent on which the country is located
• 1 Case Every X ppl: Integer. Gives us an idea of the rate of cases per country
• 1 Death Every X ppl: Integer. Gives us an idea of the rate of death due to COVID-19
• 1 Test Every X ppl: Integer. Gives us an idea of the rate of testing per country
• New Cases/1M pop: Float. New cases per 1M population
• New Deaths/1M pop: Integer. New deaths per 1M population
• Active Cases/1M pop: Integer. Active cases per 1M population

Sources

This data was collected from https://www.worldometers.info/coronavirus/

On March 10, 2023, the Johns Hopkins Coronavirus Resource Center ceased collecting and reporting of global COVID-19 data. For updated cases, deaths, and vaccine data please visit the following sources:Global: World Health Organization (WHO)U.S.: U.S. Centers for Disease Control and Prevention (CDC)For more information, visit the Johns Hopkins Coronavirus Resource Center.This feature layer contains the most up-to-date COVID-19 cases and latest trend plot. It covers China, Canada, Australia (at province/state level), and the rest of the world (at country level, represented by either the country centroids or their capitals)and the US at county-level. Data sources: WHO, CDC, ECDC, NHC, DXY, 1point3acres, Worldometers.info, BNO, state and national government health departments, and local media reports. . The China data is automatically updating at least once per hour, and non-China data is updating hourly. This layer is created and maintained by the Center for Systems Science and Engineering (CSSE) at the Johns Hopkins University. This feature layer is supported by Esri Living Atlas team and JHU Data Services. This layer is opened to the public and free to share. Contact us.

Context

What Is COVID-19?

A coronavirus is a kind of common virus that causes an infection in your nose, sinuses, or upper throat. Most coronaviruses aren't dangerous.

COVID-19 is a disease that can cause what doctors call a respiratory tract infection. It can affect your upper respiratory tract (sinuses, nose, and throat) or lower respiratory tract (windpipe and lungs). It's caused by a coronavirus named SARS-CoV-2.

It spreads the same way other coronaviruses do, mainly through person-to-person contact. Infections range from mild to serious.

SARS-CoV-2 is one of seven types of coronavirus, including the ones that cause severe diseases like Middle East respiratory syndrome (MERS) and sudden acute respiratory syndrome (SARS). The other coronaviruses cause most of the colds that affect us during the year but aren’t a serious threat for otherwise healthy people.

In early 2020, after a December 2019 outbreak in China, the World Health Organization identified SARS-CoV-2 as a new type of coronavirus. The outbreak quickly spread around the world.

Is there more than one strain of SARS-CoV-2?

It’s normal for a virus to change, or mutate, as it infects people. A Chinese study of 103 COVID-19 cases suggests the virus that causes it has done just that. They found two strains, which they named L and S. The S type is older, but the L type was more common in early stages of the outbreak. They think one may cause more cases of the disease than the other, but they’re still working on what it all means.

How long will the coronavirus last?

It’s too soon to tell how long the pandemic will continue. It depends on many things, including researchers’ work to learn more about the virus, their search for a treatment and a vaccine, and the public’s efforts to slow the spread.

Dozens of vaccine candidates are in various stages of development and testing. This process usually takes years. Researchers are speeding it up as much as they can, but it still might take 12 to 18 months to find a vaccine that works and is safe.

Symptoms of COVID-19

The main symptoms include:

• Fever
• Coughing
• Shortness of breath
• Fatigue
• Chills, sometimes with shaking
• Body aches
• Headache
• Sore throat
• Loss of smell or taste
• Nausea
• Diarrhea

The virus can lead to pneumonia, respiratory failure, septic shock, and death. Many COVID-19 complications may be caused by a condition known as cytokine release syndrome or a cytokine storm. This is when an infection triggers your immune system to flood your bloodstream with inflammatory proteins called cytokines. They can kill tissue and damage your organs.

STAY HOME. STAY SAFE !

Content

ALL DATASETS HAVE BEEN CLEANED FOR DIRECT USE.

Total_World_covid-19.csv : This dataset contains the worldwide data country-wise such as total cases , total active, deaths, etc. along with testing data.

Total_India_covid-19.csv : This dataset contains India level data statewise such as confirmed cases , active cases, deaths, etc.

Total_US_covid-19.csv : This dataset contains India level data statewise such as confirmed cases , active cases, deaths, etc.

Daily_States_India.csv : This dataset contains daily statewise data of India such as daily confirmed , daily active , daily deaths and daily recovered.

Total_Maharshtra_covid-19.csv : This dataset contains Maharashtra's district wise data such as confirmed cases , active cases, deaths, etc.

Acknowledgements

1. World and US data has been collected from Worldometer . Thanks a lot.

2. India and State level along with Maharashtra district data has been collected from Covid19India. Special thanks to them for providing updated and such wonderful data .

Inspiration

1) What has been the Covid-19 trend across the world, Is it declining? Is it increasing? 2) Which countries have been able to sustain and control the virus spread? 3) How is India coping up with the virus? Have they been able to control it at the given cost of 2 months nationwide lockdown?

As of May 2, 2023, the outbreak of the coronavirus disease (COVID-19) had been confirmed in almost every country in the world. The virus had infected over 687 million people worldwide, and the number of deaths had reached almost 6.87 million. The most severely affected countries include the U.S., India, and Brazil.

COVID-19: background information COVID-19 is a novel coronavirus that had not previously been identified in humans. The first case was detected in the Hubei province of China at the end of December 2019. The virus is highly transmissible and coughing and sneezing are the most common forms of transmission, which is similar to the outbreak of the SARS coronavirus that began in 2002 and was thought to have spread via cough and sneeze droplets expelled into the air by infected persons.

Naming the coronavirus disease Coronaviruses are a group of viruses that can be transmitted between animals and people, causing illnesses that may range from the common cold to more severe respiratory syndromes. In February 2020, the International Committee on Taxonomy of Viruses and the World Health Organization announced official names for both the virus and the disease it causes: SARS-CoV-2 and COVID-19, respectively. The name of the disease is derived from the words corona, virus, and disease, while the number 19 represents the year that it emerged.

This feature layer contains the most up-to-date COVID-19 cases for the US, Canada. Data sources: WHO, CDC, ECDC, NHC, DXY, 1point3acres, Worldometers.info, BNO, state and national government health departments, and local media reports. Read more in this blog. The China data is automatically updating at least once per hour, and non China data is updating manually. This layer is created and maintained by the Center for Systems Science and Engineering (CSSE) at the Johns Hopkins University. This feature layer is supported by Esri Living Atlas team and JHU Data Services. This layer is opened to the public and free to share. Contact Johns Hopkins.

Research Hypothesis - That cannabis may predispose to COVID-19 viral infection due to its immunomodulatory, envorinmental contaminants, vaping and smoking inhalation actions. Data was analyzed by geospatial and causal inference techniques in R. Data was gathered from publicly available on line sources including: Data were downloaded from Publicly available datasets including: • US Census bureau 2019 • Five Year American Community Survey 2013-2018 • National Survey of Drug Use and Health (NSDUH) • NSDUH Resticted Use Data Analysis System (RDAS) • US Department of Transport International Flight Data • Worldometer Covid -19 Dataset

Data were collected in the six domains of: • COVID numbers • Fights – numbers of flights and numbers of overseas destionations • Median household income • State ethnic composition • Population and population density • Drug use

Inverse probability weights were constructed by inverse probability weighting conducted in package ipw in R.

Geospatial weights were constructed in package spdep in R.

Content

The current population of the United States of America is 334,464,117 as of Saturday, April 16, 2022, based on Worldometer elaboration of the latest United Nations data. This three datasets contain population data of USA (2020 and histIndiaorical), population forecast and population in major cities.

Attribute Information

• Year - Years from 2020-1955
• Population - Population in the respective year
• Yearly % Change - Percentage Yearly Change in Population
• Yearly Change - Yearly Change in Population
• Migrants (net) - Total number of migrants
• Median Age - Median age of the population
• Fertility Rate - Fertility rate
• Density (P/Km²)- Population density (population per square km)
• Urban Pop %- Percentage of urban population
• Urban Population- Urban population
• Country's Share of World Pop - Population share
• World Population - World Population in the respective year
• India Global Rank - Global Rank in Population

Source

Link : https://www.worldometers.info/world-population/us-population/

Updated Covid 19 and Other Datasets

Link : https://www.kaggle.com/anandhuh/datasets

If you find it useful, please support by upvoting ❤️

Thank You

On March 10, 2023, the Johns Hopkins Coronavirus Resource Center ceased collecting and reporting of global COVID-19 data. For updated cases, deaths, and vaccine data please visit the following sources:Global: World Health Organization (WHO)U.S.: U.S. Centers for Disease Control and Prevention (CDC)For more information, visit the Johns Hopkins Coronavirus Resource Center.This feature layer contains the most up-to-date COVID-19 cases and the latest trend plot. It covers the US (county or state level), China, Canada, Australia (province/state level), and the rest of the world (country/region level, represented by either the country centroids or their capitals). Data sources are WHO, CDC, ECDC, NHC, DXY, 1point3acres, Worldometers.info, BNO, the COVID Tracking Project (testing and hospitalizations), state and national government health departments, and local media reports. This layer is created and maintained by the Center for Systems Science and Engineering (CSSE) at the Johns Hopkins University. This feature layer is supported by Esri Living Atlas team, JHU APL and JHU Data Services. This layer is opened to the public and free to share. Contact us.