Northeastern United States County Boundary data are intended for geographic display of state and county boundaries at statewide and regional levels. Use it to map and label counties on a map. These data are derived from Northeastern United States Political Boundary Master layer. This information should be displayed and analyzed at scales appropriate for 1:24,000-scale data. The State of Connecticut, Department of Environmental Protection (CTDEP) assembled this regional data layer using data from other states in order to create a single, seamless representation of political boundaries within the vicinity of Connecticut that could be easily incorporated into mapping applications as background information. More accurate and up-to-date information may be available from individual State government Geographic Information System (GIS) offices. Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.)

This data set provides a generalized outline of the 72 counties in Wisconsin. The data is derived from 1:24,000-scale sources.

In late 1996, the Dept of Conservation (DOC) surveyed state and federal agencies about the county boundary coverage they used. As a result, DOC adopted the 1:24,000 (24K) scale U.S. Bureau of Reclamation (USBR) dataset (USGS source) for their Farmland Mapping and Monitoring Program (FMMP) but with several modifications. Detailed documentation of these changes is provided by FMMP and included in the lineage section of the metadata.A dataset was made available (approximately 2004) through CALFIRE - FRAP and the California Spatial Information Library (CaSIL), with additional updates throughout subsequent years. More recently, an effort was made to improve the coastal linework by using the previous interior linework from the 24k data, but replacing the coastal linework based on NOAA's ERMA coastal dataset (which used NAIP 2010). In this dataset, all bays (plus bay islands and constructed features) are merged into the mainland, and coastal features (such as islands and constructed features) are not included, with the exception of the Channel Islands which ARE included.This service represents the latest released version, and is updated when new versions are released. As of June, 2019 it represents cnty19_1.

Connecticut and Vicinity County Boundary data are intended for geographic display of state and county boundaries at statewide and regional levels. Use it to map and label counties on a map. These data are derived from Northeastern United States Political Boundary Master layer. This information should be displayed and analyzed at scales appropriate for 1:24,000-scale data. The State of Connecticut, Department of Environmental Protection (CTDEP) assembled this regional data layer using data from other states in order to create a single, seamless representation of political boundaries within the vicinity of Connecticut that could be easily incorporated into mapping applications as background information. More accurate and up-to-date information may be available from individual State government Geographic Information System (GIS) offices. Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.)

The 2022 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The generalized boundaries for counties and equivalent entities are based on those as of January 1, 2022, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS).

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for counties and equivalent entities are as of January 1, 2017, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS).

This dataset contains County Boundary Lines for the Commonwealth of Kentucky. State boundary along Ohio River has been updated to reflect the Supreme Court Case regarding a boundary dispute between Kentucky, Indiana and Ohio in 1980 (Ohio v. Kentucky, 444 U.S. 335 (1980)).Online Linkage: https://ky.box.com/v/kymartian-KyBnds-County

The North Carolina State and County Boundary vector polygon data provides location information for North Carolina State and County Boundary lines derived from the best available survey and/or Geographic Information System (GIS) data. Sources for information are the North Carolina Geodetic Survey (NCGS), NC Department of Transportation (NCDOT), United States Geological Survey (USGS), and field surveys conducted by licensed surveyors in North Carolina and neighboring states that have been approved and recorded in their respective counties. North Carolina Geodetic Survey assists counties on a cooperative basis (NC General Statute 153A-18) in defining and monumenting the location of uncertain or disputed boundaries as established by law. Some counties have completed boundary surveys for at least a portion of their county boundary. However, the majority of county boundaries have not been surveyed and are represented by the best currently available data from GIS sources, including NCDOT county maps (which originally came from the USGS) and updated county parcel maps.

Map of Kansas county boundaries.The full Kansas geospatial catalog is administered by the Kansas Data Access & Support Center (DASC) and can be found at the following URL: https://hub.kansasgis.org/

This dataset was created by TxDOT for internal purposes. TxDOT is not the authority for county boundary data for the state. These features were digitized by TxDOT from georeferenced USGS topo maps to enable the classification of roadway attributes for the purposes of satisfying federal and state reporting requirements, and to serve as a base layer for TxDOT's cartographic products. This version utilizes a generalized boundary along the coast, which is sometimes necessary for analysis in which it is important to encompass segments of roadways that travel over water. Roadways on bridges or causeways that span intracoastal waterways are not covered by detailed polygons that precisely follow the coastline, therefore a generalized boundary is needed for some types of analysis where it is important to preserve such relationships.Use at your own risk. Update Frequency: As NeededSource: Texas General Land OfficeSecurity Level: PublicOwned by TxDOT: FalseRelated LinksData Dictionary PDF [Generated 2025/03/14]

Map Index Sheets from Block and Lot Grid of Property Assessment and based on aerial photography, showing 1983 datum with solid line and NAD 27 with 5 second grid tics and italicized grid coordinate markers and outlines of map sheet boundaries. Each grid square is 3500 x 4500 feet. Each Index Sheet contains 16 lot/block sheets, labeled from left to right, top to bottom (4 across, 4 down): A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S. The first (4) numeric characters in a parcelID indicate the Index sheet in which the parcel can be found, the alpha character identifies the block in which most (or all) of the property lies.

Lake County's most comprehensive interactive web mapping application and GIS data viewer. View data, run analysis tools, and create PDF documents all inside Maps Online!

This service provides vector polygon dataset defining the official boundaries of the 100 counties within North Carolina as well as the boundaries between North Carolina and the states which border North Carolina.The North Carolina county polygon boundary service provides location information for North Carolina State and County Boundary lines derived from the best available survey and/or Geographic Information System (GIS) data. Sources for information are the North Carolina Geodetic Survey (NCGS), NC Department of Transportation (NCDOT), United States Geological Survey (USGS), and field surveys conducted by licensed surveyors in North Carolina and neighboring states that have been approved and recorded in their respective counties. Some boundaries cannot be surveyed in cases where boundaries are coincident with river centers. North Carolina Geodetic Survey assists counties on a cooperative basis (NC General Statute 153A-18) in defining and monumenting the location of uncertain or disputed boundaries as established by law. Some counties have completed boundary surveys for at least a portion of their county boundary. However, the majority of county boundaries have not been surveyed and are represented by the best currently available data from GIS sources, including NCDOT county maps (which originally came from the USGS) and updated county parcel maps.This data is updated annually, first quarter (usually in February).MetadataThe metadata for the contained layer of the NCDOT County Boundaries Service is available through the following link:County Boundaries PolygonPoint of Contact North Carolina Department of Information Technology -Transportation, GIS UnitGIS Data and Services ConsultantContact information:gishelp@ncdot.govCentury Center – Building B1020 Birch Ridge DriveRaleigh, NC 27610Hours of service: 9:00am - 5:00pm Monday – FridayContact instructions: Please send an email with any issues, questions, or comments regarding the County Boundaries data. If it is an immediate need, please indicate as such in the subject line in an email.NCDOT GIS Unit GO! NC Product Team

This map includes change areas for city and county boundaries filed in accordance with Government Code 54900. The initial dataset was first published on October 20, 2021, and was based on the State Board of Equalization's tax rate area boundaries. As of April 1, 2024, the maintenance of this dataset is provided by the California Department of Tax and Fee Administration for the purpose of determining sales and use tax jurisdictions. The boundaries are continuously being revised when areas of conflict are discovered between the original boundary provided by the California State Board of Equalization and the boundary made publicly available by local, state, and federal government. Some differences may occur between actual recorded boundaries and the boundaries used for sales and use tax purposes. The boundaries in this map are representations of taxing jurisdictions and should not be used to determine precise city or county boundary line locations.The data is updated within 10 business days of the CDTFA receiving a copy of the Board of Equalization's acknowledgement letter.BOE_CityAnx Data Dictionary: COFILE = county number - assessment roll year - file number (see note*); CHANGE = affected city, unincorporated county, or boundary correction; EFFECTIVE = date the change was effective by resolution or ordinance (see note*); RECEIVED = date the change was received at the BOE; ACKNOWLEDGED = date the BOE accepted the filing for inclusion into the tax rate area system; NOTES = additional clarifying information about the action.*Note: A COFILE number ending in "000" is a boundary correction and the effective date used is the date the map was corrected.BOE_CityCounty Data Dictionary: COUNTY = county name; CITY = city name or unincorporated territory; COPRI = county number followed by the 3-digit city primary number used in the Board of Equalization's 6-digit tax rate area numbering system (for the purpose of this map, unincorporated areas are assigned 000 to indicate that the area is not within a city).

It includes the following counties: Bullitt County, Hardin County, Jefferson County, Clark County, Oldham County, Henry County, Meade County, Harrison County, Shelby County, Spencer County, Trimble County, Floyd County. This area is also the extent of our base map caches.

1. US Census Bureau Cartographic Boundary File of county boundaries for the Commonwealth of Virginia.

From the US Census Bureau: "The cartographic boundary files are simplified representations of selected geographic areas from the Census Bureau’s MAF/TIGER geographic database. These boundary files are specifically designed for small scale thematic mapping."

Publication Date: May 2025. Updated as needed. Current as of the Publication Date. The data can be downloaded here: https://gis.ny.gov/civil-boundaries#about-civil-boundaries. This feature service has polygon layers for the following boundary types: State, Counties, Cites, Towns, Cities and Towns combined, Villages, and Indian Territories. In addition, there are separate shoreline layers for the State layer and the County layer. Boundaries are at 1:24,000-scale positional accuracy except for the shoreline in State Shoreline and Counties Shoreline which is being adjusted to 1:24,000-scale positional accuracy as part of ongoing work. Boundary changes are made as needed and based on authoritative sources. See metadata for each layer for additional information. This map service is available to the public. The State of New York, acting through the New York State Office of Information Technology Services, makes no representations or warranties, express or implied, with respect to the use of or reliance on the Data provided. The User accepts the Data provided “as is” with no guarantees that it is error free, complete, accurate, current or fit for any particular purpose and assumes all risks associated with its use. The State disclaims any responsibility or legal liability to Users for damages of any kind, relating to the providing of the Data or the use of it. Users should be aware that temporal changes may have occurred since this Data was created.

This is the standard Minnesota State County Boundary dataset that is used by MNDNR and many other state agencies. It is maintained by the MNDNR Lands and Minerals Division.

Please read at the accuracy and lineage sections of this metadata to make sure this dataset is appropriate for your application!

This layer presents the counties of the state of Virginia. It provides detailed boundaries that are consistent with the tract, block group, and state data sets and are effective at regional and state levels.

This layer contains Legal City boundaries within Los Angeles County. The Los Angeles County Department of Public Works provides the most current shape file of these city boundaries for download at its Spatial Information Library.Note: This boundary layer will not line up with the Thomas Brothers city layer. Principal attributes include:CITY_NAME: represents the city's name.CITY_TYPE: may be used for definition queries; "Unincorporated" or "City".FEAT_TYPE: contains the type of feature each polygon represents:Land - Use this value for your definition query if you want to see only land features on your map.Pier - One example is the Santa Monica Pier. Man-made features may be regarded as extensions of the coastline.Breakwater - Examples include the breakwater barriers that protect the Los Angeles Harbor.Water - Polygons with this attribute value represent internal navigable waters. Examples of internal waters are found in the Long Beach Harbor and in Marina del Rey.3NM Buffer - Per the Submerged Lands Act, the seaward boundaries of coastal cities and unincorporated county areas are three nautical miles (a nautical mile is 1852 meters) from the coastline.