The statistic shows the 30 largest countries in the world by area. Russia is the largest country by far, with a total area of about 17 million square kilometers.

Population of Russia

Despite its large area, Russia - nowadays the largest country in the world - has a relatively small total population. However, its population is still rather large in numbers in comparison to those of other countries. In mid-2014, it was ranked ninth on a list of countries with the largest population, a ranking led by China with a population of over 1.37 billion people. In 2015, the estimated total population of Russia amounted to around 146 million people. The aforementioned low population density in Russia is a result of its vast landmass; in 2014, there were only around 8.78 inhabitants per square kilometer living in the country. Most of the Russian population lives in the nation’s capital and largest city, Moscow: In 2015, over 12 million people lived in the metropolis.

Russia is the largest country in Europe, and also the largest in the world, its total size amounting to 17 million square kilometers (km2). It should be noted, however, that over three quarters of Russia is located in Asia, and the Ural mountains are often viewed as the meeting point of the two continents in Russia; nonetheless, European Russia is still significantly larger than any other European country. Ukraine, the second largest country on the continent, is only 603,000 km2, making it about 28 times smaller than its eastern neighbor, or seven times smaller than the European part of Russia. France is the third largest country in Europe, but the largest in the European Union. The Vatican City, often referred to as the Holy Sea, is both the smallest country in Europe and in the world, at just one km2. Population Russia is also the most populous country in Europe. It has around 144 million inhabitants across the country; in this case, around three quarters of the population live in the European part, which still gives it the largest population in Europe. Despite having the largest population, Russia is a very sparsely populated country due to its size and the harsh winters. Germany is the second most populous country in Europe, with 83 million inhabitants, while the Vatican has the smallest population. Worldwide, India and China are the most populous countries, with approximately 1.4 billion inhabitants each. Cities Moscow in Russia is ranked as the most populous city in Europe with around 13 million inhabitants, although figures vary, due to differences in the methodologies used by countries and sources. Some statistics include Istanbul in Turkey* as the largest city in Europe with its 15 million inhabitants, bit it has been excluded here as most of the country and parts of the city is located in Asia. Worldwide, Tokyo is the most populous city, with Jakarta the second largest and Delhi the third.

The average for 2021 based on 196 countries was 656013 sq. km. The highest value was in Russia: 16376870 sq. km and the lowest value was in Monaco: 2 sq. km. The indicator is available from 1961 to 2022. Below is a chart for all countries where data are available.

The statistic shows the largest countries in South America, based on land area. Brazil is the largest country by far, with a total area of over 8.5 million square kilometers, followed by Argentina, with almost 2.8 million square kilometers.

Countries and territories is a controlled vocabulary that lists concepts associated with names of countries and territories. It is a corporate reference data asset covered by the Corporate Reference Data Management policy of the European Commission. It provides codes and names of geospatial and geopolitical entities in all official EU languages and is the result of a combination of multiple relevant standards, created to serve the requirements and use cases of the EU institutions services. Its main scope is to support documentary metadata activities. The codes of the concepts included are correlated with the ISO 3166 international standard. The authority code relies where possible on the ISO 3166-1 alpha-3 code. Additional user-assigned alpha-3 codes have been used to cover entities that are not included in the ISO 3166-1 standard. The corporate list contains mappings with the ISO 3166-1 two-letter codes, the Interinstitutional Style Guide codes and with other internal and external identifiers including ISO 3166-1 numeric, ISO 3166-3, UNSD M49, UNSD Geoscheme, IBAN, TIR, IANA domain. For the names of countries and territories, the corporate list synchronises with the Interinstitutional Style Guide (ISG, Section 7.1 and Annexes A5 and A6) and with the IATE terminology database. Membership and classification properties provide possibilities to group concepts, e.g., UN, EU, EEA, EFTA, Schengen area, Euro area, NATO, OECD, UCPM, ENP-EAST, ENP-SOUTH, EU candidate countries and potential candidates. Countries and territories is maintained by the Publications Office of the European Union and disseminated on the EU Vocabularies website. Regular updates are foreseen based on its stakeholders’ needs. Downloads in human-readable formats (.csv, .html) are also available.

This dataset provides values for GDP reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

The average for 2021 based on 27 countries was 148029 sq. km. The highest value was in France: 547557 sq. km and the lowest value was in Malta: 320 sq. km. The indicator is available from 1961 to 2022. Below is a chart for all countries where data are available.

Algeria is the biggest country in Africa, with an area exceeding 2.38 million square kilometers as of 2020. The Democratic Republic of the Congo and Sudan follow with a total area of around 2.34 million and 1.88 million square kilometers, respectively. On the other hand, Seychelles is the smallest country on the continent, with an area of only 460 square kilometers. Overall, Africa’s total area exceeds 30 million square kilometers, being the second largest continent in the world after Asia. Nigeria and Ethiopia lead the ranking of the most populated countries in Africa.

How have the African countries been formed?

The political geography of Africa has been influenced by its colonial history. Between the 19th and 20th Century, the European colonizers have divided up Africa. The partition of the territories was merely driven by strategic purposes: Borders between countries were artificially created in the absence of a geographic border. Following the decolonization, most countries gained their independence in the second half of the 1900s. The newest country in Africa is South Sudan, which became independent in 2011.

Africa's physical geography

Geographically, the African continent is mostly constituted by plains and tablelands. Inner plateaus are prevalent in the sub-Saharan region. In the center-north, the arid Sahara Desert extends for around nine million square kilometers, being the largest subtropical desert in the world. The continent also has some of the biggest water basins worldwide, namely the Nile, Congo, and Niger rivers. East Africa has, instead, the highest summit on the continent, the Kilimanjaro. Peaking at 5,895 meters, the mountain dominates Tanzania’s landscape and attracts thousands of climbers each year.

The ranking shows the area of countries within their internationally recognized borders. Both land and water borders are taken into account. The data for the ranking is collected by statistical agencies and organizations.

Based on land area, Brazil is the largest country in Latin America by far, with a total area of over 8.5 million square kilometers. Argentina follows with almost 2.8 million square kilometers. Cuba, whose surface area extends over almost 111,000 square kilometers, is the Caribbean country with the largest territory.

Brazil: a country with a lot to offer

Brazil's borders reach nearly half of the South American subcontinent, making it the fifth-largest country in the world and the third-largest country in the Western Hemisphere. Along with its landmass, Brazil also boasts the largest population and economy in the region. Although Brasília is the capital, the most significant portion of the country's population is concentrated along its coastline in the cities of São Paulo and Rio de Janeiro.

South America: a region of extreme geographic variation

With the Andes mountain range in the West, the Amazon Rainforest in the East, the Equator in the North, and Cape Horn as the Southern-most continental tip, South America has some of the most diverse climatic and ecological terrains in the world. At its core, its biodiversity can largely be attributed to the Amazon, the world's largest tropical rainforest, and the Amazon river, the world's largest river. However, with this incredible wealth of ecology also comes great responsibility. In the past decade, roughly 80,000 square kilometers of the Brazilian Amazon were destroyed. And, as of late 2019, there were at least 1,000 threatened species in Brazil alone.

This reference data provides a standard list of values for all Countries, Territories and Geographic areas. This list is intended to standardize the way Countries, Territories and Geographic areas are described in datasets to enable data interoperability and improve data quality. The data dictionary explains what each column means in the list.

This dataset provides values for GDP reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

The statistic shows the largest countries in Central America, based on land area. Nicaragua is the largest country in the subregion, with a total area of over 130 thousand square kilometers, followed by Honduras, with more than 112 thousand square kilometers.

Matched boundary lines and polygons with names attributes for countries and sovereign states. Includes dependencies (French Polynesia), map units (U.S. Pacific Island Territories) and sub-national map subunits (Corsica versus mainland Metropolitan France).

This dataset provides values for GDP reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

The average for 2021 based on 192 countries was 14.4 percent. The highest value was in Bangladesh: 60.5 percent and the lowest value was in Djibouti: 0.1 percent. The indicator is available from 1961 to 2022. Below is a chart for all countries where data are available.

Overview The Office of the Geographer and Global Issues at the U.S. Department of State produces the Large Scale International Boundaries (LSIB) dataset. The current edition is version 11.4 (published 24 February 2025). The 11.4 release contains updated boundary lines and data refinements designed to extend the functionality of the dataset. These data and generalized derivatives are the only international boundary lines approved for U.S. Government use. The contents of this dataset reflect U.S. Government policy on international boundary alignment, political recognition, and dispute status. They do not necessarily reflect de facto limits of control. National Geospatial Data Asset This dataset is a National Geospatial Data Asset (NGDAID 194) managed by the Department of State. It is a part of the International Boundaries Theme created by the Federal Geographic Data Committee. Dataset Source Details Sources for these data include treaties, relevant maps, and data from boundary commissions, as well as national mapping agencies. Where available and applicable, the dataset incorporates information from courts, tribunals, and international arbitrations. The research and recovery process includes analysis of satellite imagery and elevation data. Due to the limitations of source materials and processing techniques, most lines are within 100 meters of their true position on the ground. Cartographic Visualization The LSIB is a geospatial dataset that, when used for cartographic purposes, requires additional styling. The LSIB download package contains example style files for commonly used software applications. The attribute table also contains embedded information to guide the cartographic representation. Additional discussion of these considerations can be found in the Use of Core Attributes in Cartographic Visualization section below. Additional cartographic information pertaining to the depiction and description of international boundaries or areas of special sovereignty can be found in Guidance Bulletins published by the Office of the Geographer and Global Issues: https://data.geodata.state.gov/guidance/index.html Contact Direct inquiries to internationalboundaries@state.gov. Direct download: https://data.geodata.state.gov/LSIB.zip Attribute Structure The dataset uses the following attributes divided into two categories: ATTRIBUTE NAME | ATTRIBUTE STATUS CC1 | Core CC1_GENC3 | Extension CC1_WPID | Extension COUNTRY1 | Core CC2 | Core CC2_GENC3 | Extension CC2_WPID | Extension COUNTRY2 | Core RANK | Core LABEL | Core STATUS | Core NOTES | Core LSIB_ID | Extension ANTECIDS | Extension PREVIDS | Extension PARENTID | Extension PARENTSEG | Extension These attributes have external data sources that update separately from the LSIB: ATTRIBUTE NAME | ATTRIBUTE STATUS CC1 | GENC CC1_GENC3 | GENC CC1_WPID | World Polygons COUNTRY1 | DoS Lists CC2 | GENC CC2_GENC3 | GENC CC2_WPID | World Polygons COUNTRY2 | DoS Lists LSIB_ID | BASE ANTECIDS | BASE PREVIDS | BASE PARENTID | BASE PARENTSEG | BASE The core attributes listed above describe the boundary lines contained within the LSIB dataset. Removal of core attributes from the dataset will change the meaning of the lines. An attribute status of “Extension” represents a field containing data interoperability information. Other attributes not listed above include “FID”, “Shape_length” and “Shape.” These are components of the shapefile format and do not form an intrinsic part of the LSIB. Core Attributes The eight core attributes listed above contain unique information which, when combined with the line geometry, comprise the LSIB dataset. These Core Attributes are further divided into Country Code and Name Fields and Descriptive Fields. County Code and Country Name Fields “CC1” and “CC2” fields are machine readable fields that contain political entity codes. These are two-character codes derived from the Geopolitical Entities, Names, and Codes Standard (GENC), Edition 3 Update 18. “CC1_GENC3” and “CC2_GENC3” fields contain the corresponding three-character GENC codes and are extension attributes discussed below. The codes “Q2” or “QX2” denote a line in the LSIB representing a boundary associated with areas not contained within the GENC standard. The “COUNTRY1” and “COUNTRY2” fields contain the names of corresponding political entities. These fields contain names approved by the U.S. Board on Geographic Names (BGN) as incorporated in the ‘"Independent States in the World" and "Dependencies and Areas of Special Sovereignty" lists maintained by the Department of State. To ensure maximum compatibility, names are presented without diacritics and certain names are rendered using common cartographic abbreviations. Names for lines associated with the code "Q2" are descriptive and not necessarily BGN-approved. Names rendered in all CAPITAL LETTERS denote independent states. Names rendered in normal text represent dependencies, areas of special sovereignty, or are otherwise presented for the convenience of the user. Descriptive Fields The following text fields are a part of the core attributes of the LSIB dataset and do not update from external sources. They provide additional information about each of the lines and are as follows: ATTRIBUTE NAME | CONTAINS NULLS RANK | No STATUS | No LABEL | Yes NOTES | Yes Neither the "RANK" nor "STATUS" fields contain null values; the "LABEL" and "NOTES" fields do. The "RANK" field is a numeric expression of the "STATUS" field. Combined with the line geometry, these fields encode the views of the United States Government on the political status of the boundary line. ATTRIBUTE NAME | | VALUE | RANK | 1 | 2 | 3 STATUS | International Boundary | Other Line of International Separation | Special Line A value of “1” in the “RANK” field corresponds to an "International Boundary" value in the “STATUS” field. Values of ”2” and “3” correspond to “Other Line of International Separation” and “Special Line,” respectively. The “LABEL” field contains required text to describe the line segment on all finished cartographic products, including but not limited to print and interactive maps. The “NOTES” field contains an explanation of special circumstances modifying the lines. This information can pertain to the origins of the boundary lines, limitations regarding the purpose of the lines, or the original source of the line. Use of Core Attributes in Cartographic Visualization Several of the Core Attributes provide information required for the proper cartographic representation of the LSIB dataset. The cartographic usage of the LSIB requires a visual differentiation between the three categories of boundary lines. Specifically, this differentiation must be between: International Boundaries (Rank 1); Other Lines of International Separation (Rank 2); and Special Lines (Rank 3). Rank 1 lines must be the most visually prominent. Rank 2 lines must be less visually prominent than Rank 1 lines. Rank 3 lines must be shown in a manner visually subordinate to Ranks 1 and 2. Where scale permits, Rank 2 and 3 lines must be labeled in accordance with the “Label” field. Data marked with a Rank 2 or 3 designation does not necessarily correspond to a disputed boundary. Please consult the style files in the download package for examples of this depiction. The requirement to incorporate the contents of the "LABEL" field on cartographic products is scale dependent. If a label is legible at the scale of a given static product, a proper use of this dataset would encourage the application of that label. Using the contents of the "COUNTRY1" and "COUNTRY2" fields in the generation of a line segment label is not required. The "STATUS" field contains the preferred description for the three LSIB line types when they are incorporated into a map legend but is otherwise not to be used for labeling. Use of the “CC1,” “CC1_GENC3,” “CC2,” “CC2_GENC3,” “RANK,” or “NOTES” fields for cartographic labeling purposes is prohibited. Extension Attributes Certain elements of the attributes within the LSIB dataset extend data functionality to make the data more interoperable or to provide clearer linkages to other datasets. The fields “CC1_GENC3” and “CC2_GENC” contain the corresponding three-character GENC code to the “CC1” and “CC2” attributes. The code “QX2” is the three-character counterpart of the code “Q2,” which denotes a line in the LSIB representing a boundary associated with a geographic area not contained within the GENC standard. To allow for linkage between individual lines in the LSIB and World Polygons dataset, the “CC1_WPID” and “CC2_WPID” fields contain a Universally Unique Identifier (UUID), version 4, which provides a stable description of each geographic entity in a boundary pair relationship. Each UUID corresponds to a geographic entity listed in the World Polygons dataset. These fields allow for linkage between individual lines in the LSIB and the overall World Polygons dataset. Five additional fields in the LSIB expand on the UUID concept and either describe features that have changed across space and time or indicate relationships between previous versions of the feature. The “LSIB_ID” attribute is a UUID value that defines a specific instance of a feature. Any change to the feature in a lineset requires a new “LSIB_ID.” The “ANTECIDS,” or antecedent ID, is a UUID that references line geometries from which a given line is descended in time. It is used when there is a feature that is entirely new, not when there is a new version of a previous feature. This is generally used to reference countries that have dissolved. The “PREVIDS,” or Previous ID, is a UUID field that contains old versions of a line. This is an additive field, that houses all Previous IDs. A new version of a feature is defined by any change to the

In 2024, Russia had the largest population among European countries at ***** million people. The next largest countries in terms of their population size were Turkey at **** million, Germany at **** million, the United Kingdom at **** million, and France at **** million. Europe is also home to some of the world’s smallest countries, such as the microstates of Liechtenstein and San Marino, with populations of ****** and ****** respectively. Europe’s largest economies Germany was Europe’s largest economy in 2023, with a Gross Domestic Product of around *** trillion Euros, while the UK and France are the second and third largest economies, at *** trillion and *** trillion euros respectively. Prior to the mid-2000s, Europe’s fourth-largest economy, Italy, had an economy that was of a similar sized to France and the UK, before diverging growth patterns saw the UK and France become far larger economies than Italy. Moscow and Istanbul the megacities of Europe Two cities on the eastern borders of Europe were Europe’s largest in 2023. The Turkish city of Istanbul, with a population of 15.8 million, and the Russian capital, Moscow, with a population of 12.7 million. Istanbul is arguably the world’s most famous transcontinental city with territory in both Europe and Asia and has been an important center for commerce and culture for over 2,000 years. Paris was the third largest European city with a population of ** million, with London being the fourth largest at *** million.

This dataset provides values for GDP reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

The average for 2021 based on 11 countries was 671160 sq. km. The highest value was in India: 2973190 sq. km and the lowest value was in Singapore: 718 sq. km. The indicator is available from 1961 to 2022. Below is a chart for all countries where data are available.