Monaco led the ranking for countries with the highest population density in 2024, with nearly 26,000 residents per square kilometer. The Special Administrative Region of Macao came in second, followed by Singapore. The world’s second smallest country Monaco is the world’s second-smallest country, with an area of about two square kilometers and a population of only around 40,000. It is a constitutional monarchy located by the Mediterranean Sea, and while Monaco is not part of the European Union, it does participate in some EU policies. The country is perhaps most famous for the Monte Carlo casino and for hosting the Monaco Grand Prix, the world's most prestigious Formula One race. The global population Globally, the population density per square kilometer is about 60 inhabitants, and Asia is the most densely populated region in the world. The global population is increasing rapidly, so population density is only expected to increase. In 1950, for example, the global population stood at about 2.54 billion people, and it reached over eight billion during 2023.

As of July 2023, Monaco is the country with the highest population density worldwide, with an estimated population of nearly ****** per square kilometer.

In 2023, there were around 8,129 inhabitants per square kilometer living in Singapore. In comparison, there were approximately two inhabitants per square kilometer living in Mongolia that year.

The Global Population Density Grid Time Series Estimates provide a back-cast time series of population density grids based on the year 2000 population grid from SEDAC's Global Rural-Urban Mapping Project, Version 1 (GRUMPv1) data set. The grids were created by using rates of population change between decades from the coarser resolution History Database of the Global Environment (HYDE) database to back-cast the GRUMPv1 population density grids. Mismatches between the spatial extent of the HYDE calculated rates and GRUMPv1 population data were resolved via infilling rate cells based on a focal mean of values. Finally, the grids were adjusted so that the population totals for each country equaled the UN World Population Prospects (2008 Revision) estimates for that country for the respective year (1970, 1980, 1990, and 2000). These data do not represent census observations for the years prior to 2000, and therefore can at best be thought of as estimations of the populations in given locations. The population grids are consistent internally within the time series, but are not recommended for use in creating longer time series with any other population grids, including GRUMPv1, Gridded Population of the World, Version 4 (GPWv4), or non-SEDAC developed population grids. These population grids served as an input to SEDAC's Global Estimated Net Migration Grids by Decade: 1970-2000 data set.

World population density for 2022 was 61.59, a 0.92% increase from 2021.

<ul style='margin-top:20px;'>

<li>World population density for 2021 was <strong>61.03</strong>, a <strong>0.95% increase</strong> from 2020.</li>
<li>World population density for 2020 was <strong>60.46</strong>, a <strong>1.02% increase</strong> from 2019.</li>
<li>World population density for 2019 was <strong>59.85</strong>, a <strong>1.04% increase</strong> from 2018.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

The average for 2021 based on 27 countries was 187 people per square km. The highest value was in Malta: 1620 people per square km and the lowest value was in Finland: 18 people per square km. The indicator is available from 1961 to 2021. Below is a chart for all countries where data are available.

A dataset detailing the top 10 countries with the lowest population density, including their respective population densities and contributing geographical factors.

Historical chart and dataset showing Denmark population density by year from 1961 to 2022.

Estimated population density per grid-cell. The dataset is available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc (approximately 1km at the equator). The projection is Geographic Coordinate System, WGS84. The units are number of people per square kilometre based on country totals adjusted to match the corresponding official United Nations population estimates that have been prepared by the Population Division of the Department of Economic and Social Affairs of the United Nations Secretariat (2019 Revision of World Population Prospects). The mapping approach is Random Forest-based dasymetric redistribution.

Census data reveals that population density varies noticeably from area to area. Small area census data do a better job depicting where the crowded neighborhoods are. In this map, the yellow areas of highest density range from 30,000 to 150,000 persons per square kilometer. In those areas, if the people were spread out evenly across the area, there would be just 4 to 9 meters between them. Very high density areas exceed 7,000 persons per square kilometer. High density areas exceed 5,200 persons per square kilometer. The last categories break at 3,330 persons per square kilometer, and 1,500 persons per square kilometer.This dataset is comprised of multiple sources. All of the demographic data are from Michael Bauer Research with the exception of the following countries:Australia: Esri Australia and MapData ServicesCanada: Esri Canada and EnvironicsFrance: Esri FranceGermany: Esri Germany and NexigaIndia: Esri India and IndicusJapan: Esri JapanSouth Korea: Esri Korea and OPENmateSpain: Esri España and AISUnited States: Esri Demographics

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Please make sure you have read our Mapping Populations overview page before choosing and downloading a dataset.

Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc-seconds (approximately 1km at the equator)

-Unconstrained individual countries 2000-2020: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population count datasets by dividing the number of people in each pixel by the pixel surface area. These are produced using the unconstrained top-down modelling method.
-Unconstrained individual countries 2000-2020 UN adjusted: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population UN adjusted count datasets by dividing the number of people in each pixel, adjusted to match the country total from the official United Nations population estimates (UN 2019), by the pixel surface area. These are produced using the unconstrained top-down modelling method.

Data for earlier dates is available directly from WorldPop.

WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00674

The average for 2021 based on 53 countries was 112 people per square km. The highest value was in Mauritius: 634 people per square km and the lowest value was in Namibia: 3 people per square km. The indicator is available from 1961 to 2021. Below is a chart for all countries where data are available.

Greenland population density for 2022 was 0.14, a 0.01% increase from 2021.

<ul style='margin-top:20px;'>

<li>Greenland population density for 2021 was <strong>0.14</strong>, a <strong>0.51% increase</strong> from 2020.</li>
<li>Greenland population density for 2020 was <strong>0.14</strong>, a <strong>0.25% increase</strong> from 2019.</li>
<li>Greenland population density for 2019 was <strong>0.14</strong>, a <strong>0.36% increase</strong> from 2018.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Please make sure you have read our Mapping Populations overview page before choosing and downloading a dataset.

Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc-seconds (approximately 1km at the equator)

-Unconstrained individual countries 2000-2020: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population count datasets by dividing the number of people in each pixel by the pixel surface area. These are produced using the unconstrained top-down modelling method.
-Unconstrained individual countries 2000-2020 UN adjusted: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population UN adjusted count datasets by dividing the number of people in each pixel, adjusted to match the country total from the official United Nations population estimates (UN 2019), by the pixel surface area. These are produced using the unconstrained top-down modelling method.

Data for earlier dates is available directly from WorldPop.

WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00674

Description

This comprehensive dataset provides a wealth of information about all countries worldwide, covering a wide range of indicators and attributes. It encompasses demographic statistics, economic indicators, environmental factors, healthcare metrics, education statistics, and much more. With every country represented, this dataset offers a complete global perspective on various aspects of nations, enabling in-depth analyses and cross-country comparisons.

Key Features

• Country: Name of the country.
• Density (P/Km2): Population density measured in persons per square kilometer.
• Abbreviation: Abbreviation or code representing the country.
• Agricultural Land (%): Percentage of land area used for agricultural purposes.
• Land Area (Km2): Total land area of the country in square kilometers.
• Armed Forces Size: Size of the armed forces in the country.
• Birth Rate: Number of births per 1,000 population per year.
• Calling Code: International calling code for the country.
• Capital/Major City: Name of the capital or major city.
• CO2 Emissions: Carbon dioxide emissions in tons.
• CPI: Consumer Price Index, a measure of inflation and purchasing power.
• CPI Change (%): Percentage change in the Consumer Price Index compared to the previous year.
• Currency_Code: Currency code used in the country.
• Fertility Rate: Average number of children born to a woman during her lifetime.
• Forested Area (%): Percentage of land area covered by forests.
• Gasoline_Price: Price of gasoline per liter in local currency.
• GDP: Gross Domestic Product, the total value of goods and services produced in the country.
• Gross Primary Education Enrollment (%): Gross enrollment ratio for primary education.
• Gross Tertiary Education Enrollment (%): Gross enrollment ratio for tertiary education.
• Infant Mortality: Number of deaths per 1,000 live births before reaching one year of age.
• Largest City: Name of the country's largest city.
• Life Expectancy: Average number of years a newborn is expected to live.
• Maternal Mortality Ratio: Number of maternal deaths per 100,000 live births.
• Minimum Wage: Minimum wage level in local currency.
• Official Language: Official language(s) spoken in the country.
• Out of Pocket Health Expenditure (%): Percentage of total health expenditure paid out-of-pocket by individuals.
• Physicians per Thousand: Number of physicians per thousand people.
• Population: Total population of the country.
• Population: Labor Force Participation (%): Percentage of the population that is part of the labor force.
• Tax Revenue (%): Tax revenue as a percentage of GDP.
• Total Tax Rate: Overall tax burden as a percentage of commercial profits.
• Unemployment Rate: Percentage of the labor force that is unemployed.
• Urban Population: Percentage of the population living in urban areas.
• Latitude: Latitude coordinate of the country's location.
• Longitude: Longitude coordinate of the country's location.

Potential Use Cases

• Analyze population density and land area to study spatial distribution patterns.
• Investigate the relationship between agricultural land and food security.
• Examine carbon dioxide emissions and their impact on climate change.
• Explore correlations between economic indicators such as GDP and various socio-economic factors.
• Investigate educational enrollment rates and their implications for human capital development.
• Analyze healthcare metrics such as infant mortality and life expectancy to assess overall well-being.
• Study labor market dynamics through indicators such as labor force participation and unemployment rates.
• Investigate the role of taxation and its impact on economic development.
• Explore urbanization trends and their social and environmental consequences.

As of 2024, Barbados was the most densely populated country in Latin America and the Caribbean, with approximately 652 people per square kilometer. In that same year, Argentina's population density was estimated at approximately 16.7 people per square kilometer.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc-seconds (approximately 1km at the equator) -Unconstrained individual countries 2000-2020: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population count datasets by dividing the number of people in each pixel by the pixel surface area. These are produced using the unconstrained top-down modelling method. -Unconstrained individual countries 2000-2020 UN adjusted: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population UN adjusted count datasets by dividing the number of people in each pixel, adjusted to match the country total from the official United Nations population estimates (UN 2019), by the pixel surface area. These are produced using the unconstrained top-down modelling method. Data for earlier dates is available directly from WorldPop. WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00674

In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.

https://www.googleapis.com/download/storage/v1/b/kaggle-user-content/o/inbox%2F11723377%2F59bc70fb3d13d9f954e317aacbfd2bd6%2FPopulation.png?generation=1681981140865261&alt=media" alt="">

The population data from the United Nations is a dataset that contains information on the estimated population of each country in the world for various years between 1980 and 2050. The dataset includes the following columns:

• place: Name of the country or region
• pop1980: Estimated population for the year 1980
• pop2000: Estimated population for the year 2000
• pop2010: Estimated population for the year 2010
• pop2022: Estimated population for the year 2022
• pop2023: Estimated population for the year 2023
• pop2030: Estimated population for the year 2030
• pop2050: Estimated population for the year 2050
• country: ISO 3166-1 alpha-3 code of the country
• area: Total land and water area of the country (in square kilometers)
• landAreaKm: Land area of the country (in square kilometers)
• cca2: ISO 3166-1 alpha-2 code of the country
• cca3: ISO 3166-1 alpha-3 code of the country
• netChange: Annual net change in population (in thousands)
• growthRate: Annual population growth rate (as a percentage)
• worldPercentage: Percentage of world population
• density: Population density (in persons per square kilometer)
• densityMi: Population density (in persons per square mile)
• rank: Rank of the country by population

The dataset provides a comprehensive overview of the population of each country over time and can be used to analyze population trends, make population projections, and compare the population of different countries. The dataset can also be used in combination with other data sources to explore correlations between population and various social and economic indicators.

This dataset shows population details by country. Population density is a measurement of population per unit area, or exceptionally unit volume; it is a quantity of type number density. There are two columns for density: by square km and by square miles.