Monaco led the ranking for countries with the highest population density in 2024, with nearly 26,000 residents per square kilometer. The Special Administrative Region of Macao came in second, followed by Singapore. The world’s second smallest country Monaco is the world’s second-smallest country, with an area of about two square kilometers and a population of only around 40,000. It is a constitutional monarchy located by the Mediterranean Sea, and while Monaco is not part of the European Union, it does participate in some EU policies. The country is perhaps most famous for the Monte Carlo casino and for hosting the Monaco Grand Prix, the world's most prestigious Formula One race. The global population Globally, the population density per square kilometer is about 60 inhabitants, and Asia is the most densely populated region in the world. The global population is increasing rapidly, so population density is only expected to increase. In 1950, for example, the global population stood at about 2.54 billion people, and it reached over eight billion during 2023.

As of July 2022, Monaco is the country with the highest population density worldwide with an estimated population of nearly 24,500 per square kilometer. However, by 2050, it is expected to be overtaken by the Special Administrative Region of Macao.

Mauritius had the highest population density level in Africa as of 2023, with nearly 630 inhabitants per square kilometer. The country has also one of the smallest territories on the continent, which contributes to the high density. As a matter of fact, the majority of African countries with the largest concentration of people per square kilometer have the smallest geographical area as well. The exception is Nigeria, which ranks among the largest territorial countries in Africa and is very densely populated at the same time. After all, Nigeria has also the largest population on the continent.

In 2023, there were around 8,129 inhabitants per square kilometer living in Singapore. In comparison, there were approximately two inhabitants per square kilometer living in Mongolia that year.

A dataset detailing the top 10 countries with the lowest population density, including their respective population densities and contributing geographical factors.

Census data reveals that population density varies noticeably from area to area. Small area census data do a better job depicting where the crowded neighborhoods are. In this map, the yellow areas of highest density range from 30,000 to 150,000 persons per square kilometer. In those areas, if the people were spread out evenly across the area, there would be just 4 to 9 meters between them. Very high density areas exceed 7,000 persons per square kilometer. High density areas exceed 5,200 persons per square kilometer. The last categories break at 3,330 persons per square kilometer, and 1,500 persons per square kilometer.This dataset is comprised of multiple sources. All of the demographic data are from Michael Bauer Research with the exception of the following countries:Australia: Esri Australia and MapData ServicesCanada: Esri Canada and EnvironicsFrance: Esri FranceGermany: Esri Germany and NexigaIndia: Esri India and IndicusJapan: Esri JapanSouth Korea: Esri Korea and OPENmateSpain: Esri España and AISUnited States: Esri Demographics

The average for 2021 based on 47 countries was 119 people per square km. The highest value was in Mauritius: 634 people per square km and the lowest value was in Namibia: 3 people per square km. The indicator is available from 1961 to 2021. Below is a chart for all countries where data are available.

The average for 2021 based on 27 countries was 187 people per square km. The highest value was in Malta: 1620 people per square km and the lowest value was in Finland: 18 people per square km. The indicator is available from 1961 to 2021. Below is a chart for all countries where data are available.

Denmark population density for 2022 was 147.58, a 0.79% increase from 2021.

<ul style='margin-top:20px;'>

<li>Denmark population density for 2021 was <strong>146.42</strong>, a <strong>0.43% increase</strong> from 2020.</li>
<li>Denmark population density for 2020 was <strong>145.79</strong>, a <strong>0.29% increase</strong> from 2019.</li>
<li>Denmark population density for 2019 was <strong>145.36</strong>, a <strong>0.36% increase</strong> from 2018.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

World population density for 2022 was 61.59, a 0.92% increase from 2021.

<ul style='margin-top:20px;'>

<li>World population density for 2021 was <strong>61.03</strong>, a <strong>0.95% increase</strong> from 2020.</li>
<li>World population density for 2020 was <strong>60.46</strong>, a <strong>1.02% increase</strong> from 2019.</li>
<li>World population density for 2019 was <strong>59.85</strong>, a <strong>1.04% increase</strong> from 2018.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

Monaco population density for 2021 was 17,604, a 3.36% decline from 2020.

<ul style='margin-top:20px;'>

<li>Monaco population density for 2020 was <strong>18,215</strong>, a <strong>0.3% decline</strong> from 2019.</li>
<li>Monaco population density for 2019 was <strong>18,270</strong>, a <strong>0.01% increase</strong> from 2018.</li>
<li>Monaco population density for 2018 was <strong>18,268</strong>, a <strong>0.04% decline</strong> from 2017.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

India population density for 2021 was 473.42, a 0.8% increase from 2020.

<ul style='margin-top:20px;'>

<li>India population density for 2020 was <strong>469.66</strong>, a <strong>0.96% increase</strong> from 2019.</li>
<li>India population density for 2019 was <strong>465.19</strong>, a <strong>1.03% increase</strong> from 2018.</li>
<li>India population density for 2018 was <strong>460.45</strong>, a <strong>1.09% increase</strong> from 2017.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc-seconds (approximately 1km at the equator) -Unconstrained individual countries 2000-2020: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population count datasets by dividing the number of people in each pixel by the pixel surface area. These are produced using the unconstrained top-down modelling method. -Unconstrained individual countries 2000-2020 UN adjusted: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population UN adjusted count datasets by dividing the number of people in each pixel, adjusted to match the country total from the official United Nations population estimates (UN 2019), by the pixel surface area. These are produced using the unconstrained top-down modelling method. Data for earlier dates is available directly from WorldPop. WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00674

https://www.googleapis.com/download/storage/v1/b/kaggle-user-content/o/inbox%2F11723377%2F59bc70fb3d13d9f954e317aacbfd2bd6%2FPopulation.png?generation=1681981140865261&alt=media" alt="">

The population data from the United Nations is a dataset that contains information on the estimated population of each country in the world for various years between 1980 and 2050. The dataset includes the following columns:

• place: Name of the country or region
• pop1980: Estimated population for the year 1980
• pop2000: Estimated population for the year 2000
• pop2010: Estimated population for the year 2010
• pop2022: Estimated population for the year 2022
• pop2023: Estimated population for the year 2023
• pop2030: Estimated population for the year 2030
• pop2050: Estimated population for the year 2050
• country: ISO 3166-1 alpha-3 code of the country
• area: Total land and water area of the country (in square kilometers)
• landAreaKm: Land area of the country (in square kilometers)
• cca2: ISO 3166-1 alpha-2 code of the country
• cca3: ISO 3166-1 alpha-3 code of the country
• netChange: Annual net change in population (in thousands)
• growthRate: Annual population growth rate (as a percentage)
• worldPercentage: Percentage of world population
• density: Population density (in persons per square kilometer)
• densityMi: Population density (in persons per square mile)
• rank: Rank of the country by population

The dataset provides a comprehensive overview of the population of each country over time and can be used to analyze population trends, make population projections, and compare the population of different countries. The dataset can also be used in combination with other data sources to explore correlations between population and various social and economic indicators.

Mogadishu in Somalia led the ranking of cities with the highest population density in 2023, with ****** residents per square kilometer. When it comes to countries, Monaco is the most densely populated state worldwide.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Please make sure you have read our Mapping Populations overview page before choosing and downloading a dataset.

Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc-seconds (approximately 1km at the equator)

-Unconstrained individual countries 2000-2020: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population count datasets by dividing the number of people in each pixel by the pixel surface area. These are produced using the unconstrained top-down modelling method.
-Unconstrained individual countries 2000-2020 UN adjusted: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population UN adjusted count datasets by dividing the number of people in each pixel, adjusted to match the country total from the official United Nations population estimates (UN 2019), by the pixel surface area. These are produced using the unconstrained top-down modelling method.

Data for earlier dates is available directly from WorldPop.

WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00674

As of 2024, Barbados was the most densely populated country in Latin America and the Caribbean, with approximately 652 people per square kilometer. In that same year, Argentina's population density was estimated at approximately 16.7 people per square kilometer.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Please make sure you have read our Mapping Populations overview page before choosing and downloading a dataset.

Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc-seconds (approximately 1km at the equator)

-Unconstrained individual countries 2000-2020: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population count datasets by dividing the number of people in each pixel by the pixel surface area. These are produced using the unconstrained top-down modelling method.
-Unconstrained individual countries 2000-2020 UN adjusted: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population UN adjusted count datasets by dividing the number of people in each pixel, adjusted to match the country total from the official United Nations population estimates (UN 2019), by the pixel surface area. These are produced using the unconstrained top-down modelling method.

Data for earlier dates is available directly from WorldPop.

WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00674

Latin America & Caribbean population density for 2021 was 32.69, a 0.68% increase from 2020.

<ul style='margin-top:20px;'>

<li>Latin America & Caribbean population density for 2020 was <strong>32.46</strong>, a <strong>0.81% increase</strong> from 2019.</li>
<li>Latin America & Caribbean population density for 2019 was <strong>32.20</strong>, a <strong>0.89% increase</strong> from 2018.</li>
<li>Latin America & Caribbean population density for 2018 was <strong>31.92</strong>, a <strong>0.92% increase</strong> from 2017.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

The Global Population Density Grid Time Series Estimates provide a back-cast time series of population density grids based on the year 2000 population grid from SEDAC's Global Rural-Urban Mapping Project, Version 1 (GRUMPv1) data set. The grids were created by using rates of population change between decades from the coarser resolution History Database of the Global Environment (HYDE) database to back-cast the GRUMPv1 population density grids. Mismatches between the spatial extent of the HYDE calculated rates and GRUMPv1 population data were resolved via infilling rate cells based on a focal mean of values. Finally, the grids were adjusted so that the population totals for each country equaled the UN World Population Prospects (2008 Revision) estimates for that country for the respective year (1970, 1980, 1990, and 2000). These data do not represent census observations for the years prior to 2000, and therefore can at best be thought of as estimations of the populations in given locations. The population grids are consistent internally within the time series, but are not recommended for use in creating longer time series with any other population grids, including GRUMPv1, Gridded Population of the World, Version 4 (GPWv4), or non-SEDAC developed population grids. These population grids served as an input to SEDAC's Global Estimated Net Migration Grids by Decade: 1970-2000 data set.