This service provides vector polygon dataset defining the official boundaries of the 100 counties within North Carolina as well as the boundaries between North Carolina and the states which border North Carolina.The North Carolina county polygon boundary service provides location information for North Carolina State and County Boundary lines derived from the best available survey and/or Geographic Information System (GIS) data. Sources for information are the North Carolina Geodetic Survey (NCGS), NC Department of Transportation (NCDOT), United States Geological Survey (USGS), and field surveys conducted by licensed surveyors in North Carolina and neighboring states that have been approved and recorded in their respective counties. Some boundaries cannot be surveyed in cases where boundaries are coincident with river centers. North Carolina Geodetic Survey assists counties on a cooperative basis (NC General Statute 153A-18) in defining and monumenting the location of uncertain or disputed boundaries as established by law. Some counties have completed boundary surveys for at least a portion of their county boundary. However, the majority of county boundaries have not been surveyed and are represented by the best currently available data from GIS sources, including NCDOT county maps (which originally came from the USGS) and updated county parcel maps.This data is updated annually, first quarter (usually in February).MetadataThe metadata for the contained layer of the NCDOT County Boundaries Service is available through the following link:County Boundaries PolygonPoint of Contact North Carolina Department of Information Technology -Transportation, GIS UnitGIS Data and Services ConsultantContact information:gishelp@ncdot.govCentury Center – Building B1020 Birch Ridge DriveRaleigh, NC 27610Hours of service: 9:00am - 5:00pm Monday – FridayContact instructions: Please send an email with any issues, questions, or comments regarding the County Boundaries data. If it is an immediate need, please indicate as such in the subject line in an email.NCDOT GIS Unit GO! NC Product Team

The 2022 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or no MCD is defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The generalized boundaries of legal MCDs are based on those as of January 1, 2022, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CCDs, delineated in 21 states, are based on those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

The North Carolina State and County Boundary vector polygon data provides location information for North Carolina State and County Boundary lines derived from the best available survey and/or Geographic Information System (GIS) data. Sources for information are the North Carolina Geodetic Survey (NCGS), NC Department of Transportation (NCDOT), United States Geological Survey (USGS), and field surveys conducted by licensed surveyors in North Carolina and neighboring states that have been approved and recorded in their respective counties. North Carolina Geodetic Survey assists counties on a cooperative basis (NC General Statute 153A-18) in defining and monumenting the location of uncertain or disputed boundaries as established by law. Some counties have completed boundary surveys for at least a portion of their county boundary. However, the majority of county boundaries have not been surveyed and are represented by the best currently available data from GIS sources, including NCDOT county maps (which originally came from the USGS) and updated county parcel maps.

A hydrogeologic unit map was created for Wake County, North Carolina by grouping geologic map units from Clark and others, 2004 based on their water-bearing potential. The water-bearing potential of the units was determined from rock origin, composition, and texture as described in Daniel (1989) and Daniel and Payne (1990) for the Piedmont and Blue Ridge Provinces of North Carolina. A layer file is also included to provide the map symbology used in the report.

Cumberland County Zip Codes

Thickness map of Peedee aquifer confining unit based on local driller's logs, well construction data, and previously published well data within Brunswick, New Hanover, and Pender counties.

If you are looking for the authoritative NC County Boundary Dataset go here: https://ncdenr.maps.arcgis.com/home/item.html?id=9728285994804c8b9f20ce58bae45899This layer features all 100 counties without shorelines included. Attribute:CO_NAME: County NameCO_ABBR: County AbriviationACRES: Acers in each countiesRO: Regional Office that county falls withinContact:Melanie Williams

NOTE: To download parcels by county DO NOT use the map. Instead:click the Download buttonclick Download parcels by county or all counties at oncescroll to the Direct Data Downloads section and download your dataThis digital geospatial dataset represents parcel boundaries with standard core attributes for a collection of parcel data from North Carolina county data producers and the Eastern Band of Cherokee Indians. The Integrated Cadastral Data Exchange project transformed source datasets from county data producers to create a standardized dataset with consistent attributes (fields). The individual standardized county datasets were aggregated into a single dataset. The aggregated parcel dataset includes all 100 counties in North Carolina plus lands of the Eastern Band of Cherokee Indians. The source geometry is retained as published by individual county data producers. This dataset includes attributes such as ownership, area in acres, assessed value, and other core cadastral attributes. Web services have both polygons (parcel boundaries) and points representing each property, placed at or near the geometric center, with the same set of attributes.See the NC OneMap parcels page for more information.

This layer represents county outlines for the state of North Carolina. The counties are stored as polygons.

The Cumberland County GIS Data Viewer provides the general public with parcel, zoning, hydrology, soils, utilities and topographic data. You can search for a specific address, street name, parcel number (PIN), or by the owner's name.

Provides regional identifiers for county based regions of various types. These can be combined with other datasets for visualization, mapping, analyses, and aggregation. These regions include:Metropolitan Statistical Areas (Current): MSAs as defined by US OMB in 2023Metropolitan Statistical Areas (2010s): MSAs as defined by US OMB in 2013Metropolitan Statistical Areas (2000s): MSAs as defined by US OMB in 2003Region: Three broad regions in North Carolina (Eastern, Western, Central)Council of GovernmentsProsperity Zones: NC Department of Commerce Prosperity ZonesNCDOT Divisions: NC Dept. of Transportation DivisionsNCDOT Districts (within Divisions)Metro Regions: Identifies Triangle, Triad, Charlotte, All Other Metros, & Non-MetropolitanUrban/Rural defined by:NC Rural Center (Urban, Regional/Suburban, Rural) - 2020 Census designations2010 Census (Urban = Counties with 50% or more population living in urban areas in 2010)2010 Census Urbanized (Urban = Counties with 50% or more of the population living in urbanized areas in 2010 (50,000+ sized urban area))Municipal Population - State Demographer (Urban = counties with 50% or more of the population living in a municipality as of July 1, 2019)Isserman Urban-Rural Density Typology

This Flood Insurance Study was produced through a cooperative partnership between the State of North Carolina and FEMA. The North Carolina Floodplain Mapping Program, through FEMA's Cooperating Technical State (CTS) Initiative, is conducting flood hazard analyses and producing updated, digital FIRM panels for all North Carolina communities. Additional information regarding the North Carolina Floodplain Mapping Program and the data collected during the mapping process are available at http://www.ncfloodmaps.com. The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to the earth's surface using the NC State Plane Coordinate System, North American Datum 1983, Units of Feet. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

Generic wall map of North Carolina showing roads, water bodies, and county/municipal boundaries. The map is in PDF format and is 60" x 32". It is suitable for printing. The map was created in February 2012.

Thickness map of Castle Hayne confining unit based on local driller's logs, well construction data, and previously published well data within Brunswick, New Hanover, and Pender counties.

A hydrogeologic unit map was created for Wake County, North Carolina by grouping geologic map units from Clark and others, 2004 based on their water-bearing potential. The water-bearing potential of the units was determined from rock origin, composition, and texture as described in Daniel (1989) and Daniel and Payne (1990) for the Piedmont and Blue Ridge Provinces of North Carolina. A layer file is also included to provide the map symbology used in the report.

A digital elevation model (DEM) for North Carolina. The grid cell size is 3 feet. Data used to create the DEM was derived from LiDAR collected by the NC Floodplain Mapping Program and processed by NC Department of Public Safety - Division of Emergency Management.Download county-based DEMs from the NC OneMap Direct Data Downloads. Data should not be downloaded using the map on the dataset's item page.

The 2023 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some states and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

A shaded relief map derived from Digital Elevation Models (DEMs) with a 3ft. grid cell size. A vertical exaggeration factor of 3 used for visual effect. Data used to create the DEMs was derived from LiDAR collected by the NC Floodplain Mapping Program and processed by NC Department of Public Safety - Division of Emergency Management.Download county-based DEMs from the NC OneMap Direct Data Downloads. Data should not be downloaded using the map on the dataset's item page.

An aspect map (slope direction) derived from Digital Elevation Models (DEMs) with a 3ft. grid cell size. Compass direction is rendered using the following colors: red (north), magenta (northwest), blue (west), cyan (southwest), light cyan (south), light green (southeast), light orange (east), orange (northeast). Data used to create the DEMs was derived from LiDAR collected by the NC Floodplain Mapping Program and processed by NC Department of Public Safety - Division of Emergency Management.Download county-based DEMs from the NC OneMap Direct Data Downloads. Data should not be downloaded using the map on the dataset's item page.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.