This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) System (MTS). The MTS represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. County subdivisions are the primary divisions of counties and equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or is not defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The boundaries of most legal MCDs are as of January 1, 2024, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries of all CCDs are those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

Use this web map to link to other geospatial datasets available through county and city sites (Not comprehensive). May need to zoom in to see the participating cities. The county boundaries and city points were published by Washington State agencies and downloaded from geo.wa.gov. Locations are approximate, and no warranties are made regarding this data. The canvas basemap has been compiled by Esri and the ArcGIS user community from a variety of best available sources. Want to have your data site listed? Contact the Geospatial Program Office.

Unincorporated Urban Growth Areas (UGA) as defined by the Growth Management Act (GMA). The annual update is conducted by collecting UGA polygons directly from each of Washington's 39 counties. As of 2025, there are 27 counties with UGAs.All UGA polygons are normalized against the Department of Revenue's (DOR) "City Boundaries" layer (shared to the Washington Geoportal a.k.a. the GIS Open Data site: geo.wa.gov). The City Boundaries layer was processed into this UGA layer such that any overlapping area of UGA polygons (from authoritative individual counties) was erased. Since DOR polygons and county-sourced UGA polygons do not have perfect topology, many slivers resulted after the erase operation. These are attempted to be irradicated by these processing steps. "Multipart To Singlepart" Esri tool; exploded all polygons to be individualSlivers were mathematically identified using a 4 acre area threshold and a 0.3 "thinness ratio" threshold as described by Esri's "Polygon Sliver" tool. These slivers are merged into the neighboring features using Esri's "Eliminate" tool.Polygons that are less than 5,000 sq. ft. and not part of a DOR city (CITY_NM = Null) were also merged via the "Eliminate" tool. (many very small slivers were manually found yet mathematically did not meet the thinness ratio threshold)The final 8 polygons less than 25 sq. ft. were manually deleted (also slivers but were not lined up against another feature and missed by the "Eliminate" tool runs)Dissolved all features back to multipart using all fieldsAll UGAs polygons remaining are unincorporated areas beyond the city limits. Any polygon with CITY_NM populated originated from the DOR "City Boundaries" layer. The DOR's City Boundaries are updated quarterly by DOR. For the purposes of this UGA layer, the city boundaries was downloaded one time (4/24/2025) and will not be updated quarterly. Therefore, if precise city limits are required by any user of UGA boundaries, please refer to the city boundaries layer and conduct any geoprocessing needed. The DOR's "City Boundaries" layer is available here:https://www.arcgis.com/home/item.html?id=69fcb668dc8d49ea8010b6e33e42a13aData is updated in conjunction with the annual statewide parcel layer update. Latest update completed April 2025.

The 2023 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or no MCD is defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The generalized boundaries of legal MCDs are based on those as of January 1, 2023, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CCDs, delineated in 21 states, are based on those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

Washington state county boundaries.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The TIGER/Line shapefiles include both incorporated places (legal entities) and census designated places or CDPs (statistical entities). An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state, but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. The boundaries of most incorporated places in this shapefile are as of January 1, 2022, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census, but some CDPs were added or updated through the 2022 BAS as well.

Political county boundaries for Washington state. Also as KINGCO for King County only.

COB_POLY: This theme shows the jurisdictional and cartographic county areas for Oregon and Washington. The POCA layer is an integrated set of geographic- referencing data covering the state of Washington. It is derived from land surveys, DNR orthophotos, USGS 7.5' quadrangles, and DNR tract books.

The 2022 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some states and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Washington Legislative Districts 2024, also known as Remedial Map 3B, created in CASE NO. 3:22-cv-05035-RSL at the United States District Court for the Western District of Washinton at Seattle, presided over by judge Robert. S Lasnik.https://www.documentcloud.org/documents/24483664-redistricting-orderThese districts replace the 2022 Legislative districts and will be used in the 2024 elections pending US Supreme Court action.Please note that there are four split Census Blocks due to annexations in Yakima County. Portions of blocks 530770018013012, 530770018012077, 530770020042004, and 530770018011075 transferred from LD 15 to LD 14. This feature layer contains 49 features representing each of Washington State's 49 legislative districts and is projected to NAD 1983 HARN Washington State Plane South US Feet.For questions, please contact Nicholas Pharris at the Secretary of State. nicholas.pharris@sos.wa.gov

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth?s surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

This feature layer displays Affordable Connectivity Plan (ACP) enrollment and eligibility data provided by USAC and the Census Bureau's American Community Survey 5 Year Tables for 2017-2021. The data is shown for 2020 Census County Boundaries (2022 Dataset) clipped to WA State.Source: https://www.census.gov/cgi-bin/geo/shapefiles/index.php?year=2022&layergroup=Counties+%28and+equivalent%29

When a recent state law (RCW 47.04.380) referenced “legacy state transportation facilities” WSDOT quickly realized that we did not have a geospatial dataset that documented the location, dates, and former names of our legacy State Highways. Using old county and state maps, right-of-way maps, data from our internal bridge information system, and articles from old department newsletters, we have mapped about 2500 miles of former state highways. This dataset does not include information for roads that are no longer open to traffic. This dataset presents current roadways within Washington State that were formerly designated by the State of Washington as State Roads, Primary State Highways, Secondary State Highways, State Routes, or US Highways and is authored by the Washington State Department of Transportation GIS and Roadway Data Office. Updates will occur as needed.

Historic rail line locations throughout Pierce County sourced from Washington State Archive and Bureau of Land Management historic maps dated from 1850's to 2010. Please read metadata for additional information (https://matterhorn.co.pierce.wa.us/GISmetadata/pdbplan_historic_railroads.html). Any data download constitutes acceptance of the Terms of Use (https://matterhorn.co.pierce.wa.us/Disclaimer/PierceCountyGISDataTermsofUse.pdf).

Washington State county boundaries from Washington Department of Natural Resources. Acres of distribution calculated from following maps published by the Washington State Department of Agriculture in 2011: Knotweed, Bohemian, “Polygonum bohemicum” Distribution 2011. Giant, “Polygonum sachalinense” Distribution 2011. Himalayan, “Polygonum polystachyum” Distribution 2011. Knotweed, Japanese, “Polygonum cuspidatum” Distribution 2011. PRISM projects extracted from PRISM website Project Search @ https://secure.rco.wa.gov/PRISM/search/ProjectSearch.aspx in 2015.

These GIS files represent geographic boundaries for lands that are under the protection of NYS Agricultural District Law, administered by the New York State Department of Agriculture and Markets. The boundaries are derived from New York State Agricultural District, 1:24,000-scale, maps produced at county agencies. The district boundaries correspond to tax parcel data. District boundaries are joined into a file representing all of the Agricultural Districts within an entire county. Note that 2003 legislation allows lands to be added to districts on an annual basis. Electronic data provided here may predate those additions. Tax parcel detail and secondary rights-of-way are not included in this dataset. Rights-of-way for state and federal highways, railroads and utilities are only included when they are delineated on the original 1:24,000 scale maps. The data files are in ArcGIS shapefile format.

The Watershed Boundary Dataset (WBD) is a comprehensive aggregated collection of hydrologic unit data consistent with the national criteria for delineation and resolution. It defines the areal extent of surface water drainage to a point except in coastal or lake front areas where there could be multiple outlets as stated by the "Federal Standards and Procedures for the National Watershed Boundary Dataset (WBD)" “Standard” (http://pubs.usgs.gov/tm/11/a3/). Watershed boundaries are determined solely upon science-based hydrologic principles, not favoring any administrative boundaries or special projects, nor particular program or agency. This dataset represents the hydrologic unit boundaries to the 12-digit (6th level) for the entire United States. Some areas may also include additional subdivisions representing the 14- and 16-digit hydrologic unit (HU). At a minimum, the HUs are delineated at 1:24,000-scale in the conterminous United States, 1:25,000-scale in Hawaii, Pacific basin and the Caribbean, and 1:63,360-scale in Alaska, meeting the National Map Accuracy Standards (NMAS). Higher resolution boundaries are being developed where partners and data exist and will be incorporated back into the WBD. WBD data are delivered as a dataset of polygons and corresponding lines that define the boundary of the polygon. WBD polygon attributes include hydrologic unit codes (HUC), size (in the form of acres and square kilometers), name, downstream hydrologic unit code, type of watershed, non-contributing areas, and flow modifications. The HUC describes where the unit is in the country and the level of the unit. WBD line attributes contain the highest level of hydrologic unit for each boundary, line source information and flow modifications. Some GNIS names in this data are offensive so the word “Negro” has been replaced with the hydrologic unit code while the process of reviewing and changing the names is ongoing through official channels.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

This data consists of scanned maps of State Representative Districts; St. Louis County, including district 1, district 2, district 3, district 4, district 5, district 6, district 7, district 8, district 9; original map prepared in 1937 by the Works Progress Administration Project 6007; revised to Oct. 1952 by the St. Louis Planning Commission; drawn by J. Stillwell, Jan. 26, 1954; checked by D.E.B., Jan. 26, 1954

Information Security Category 1 - Public InformationDSHS ALTSA Area Agency on Aging (AAA) | Washington Association of Area Agencies on AgingAAAs were established under the Federal Older Americans Act in 1973 to help older adults (60 or older) remain in their home. AAAs are located throughout the United States and are available in every county within Washington State.AAA's help older adults plan and find additional care, services, or programs. Help can range from getting services for a frail adult so he or she can remain at home to providing access to activities and socialization through programs like senior centers. They also provide support and services to the family or friends helping to care for older adults.Tribal AAA Planning Service Area boundaries are defined using United States Census Bureau's updated 2017 American Indian Area boundaries. Non-Tribal AAA Planning Service Area boundaries are defined by subtracting the 2017 American Indian Area boundaries from the 2010 Census County boundaries for Washington State.Important: DSHS reserves the right to alter, suspend, re-host, or retire this service at any time and without notice. This is a map service that you can use in custom web applications and software products. Your use of this map service in these types of tools forms a dependency on the service definition (available fields, layers, etc.). If you form any dependency on this service, be aware of this significant risk to your purposes. You might consider mitigating your risk by extracting the source data and using it to host your own service in an environment under your control. Typically, DSHS Enterprise GIS staff will provide notification of changes via the Comments RSS capability in ArcGIS Online. You should subscribe to this RSS feed to monitor change notifications: https://www.arcgis.com/sharing/rest/content/items/0b2363ca53874a93865ff57782ca3dcf/comments?f=rss