Summary Geographic boundaries for the bay area counties

County boundaries for the San Francisco Bay Region, clipped to remove major coastal and bay water areas. Features were extracted from, and clipped using, California 2020 TIGER/Line shapefiles by the Metropolitan Transportation Commission. The 2020 TIGER/Line Shapefiles reflect available governmental unit boundaries of the counties and equivalent entities as of May 28, 2021.Counties and equivalent entities are primary legal divisions of states. In most states, these entities are termed “counties.” Each county or statistically equivalent entity is assigned a 3-character FIPS code that is unique within a state.

This digital map database provides an areally continuous representation of the Quaternary surficial deposits of the San Francisco Bay region merged from the database files from Knudsen and others (2000) and Witter and others (2006). The more detailed mapping by Witter and others (2006) of the inner part of the region (compiled at a scale of 1:24,000), is given precedence over the less detailed mapping by Knudsen and others (2000) of the outer part of the area (compiled at a scale of 1:100,000). The Quaternary map database is accompanied by a list of the map-unit names represented by polygon identities, a digital map index of the 1:24,000-scale topographic quadrangles of the region, and a figure illustrating the contents of the database. The Quaternary map database includes line work and the identity of the Quaternary map units, but no further description of the map units or how they were mapped. Use of the database should thus be accompanied by consultation with the original reports, which describe the map units and mapping procedures: citation of this database should be accompanied by citation of those original reports. As with all such digital maps, use of this database should attend to the compilation scales involved and not try to extract spatial detail or accuracy beyond those limits. Database layers: SFBQuat-lns: Quaternary map database: unit boundaries and their attributes SFBQuat-pys: Quaternary map database: polygons and their attributes SFBIndex-lns: Boundaries of 7.5-minute quadrangles for the map area, distinguishing those that form boundaries of 15-minute and 30x60-minute quadrangles SFBIndex-pys: 7.5-minute quadrangles, and for those within map area, their names and the names of the 30x60-minute quadrangles that contain them. The liquefaction ratings presented in the original reports for the various Quaternary map units remain valid and can be assigned to the units in this database if desired, with ratings of Witter and others (2006) given precedence. Assembly of the Quaternary map database involved stripping out all the information from the source maps that dealt with liquefaction, a major component of the original reports, and adjusting line work at the common boundary between the two source maps to produce a nearly seamless spatial database. The common boundary between the two sources is retained. Mismatches remaining at that common boundary are of two types: (1) contrasts in the degree of subdivision of the deposits resulting from the different compilation scales, and (2) terminations of narrow bands of water and artificial fill and levees at quadrangle boundaries that resulted from differences in details shown on the 1:24,000-scale topographic maps used as a source of mapping information in the original reports. The illustrative figure accompanying the database shows the content of the database plotted at a scale of 1:275,000, with the different map units distinguished by color and the different types of lines distinguished by symbol and color. An index map in that figure shows the 165 7½-minute quadrangles covering the region and the areas of the two source maps. Knudsen, K.L., Sowers, J.M., Witter, R.C., Wentworth, C.M., Helley, E.J., Nicholson, R.S., Wright, H.M., and Brown, K.M., 2000, Preliminary maps of Quaternary deposits and liquefaction susceptibility, nine-county San Francisco Bay region, California: a digital database: U.S. Geological Survey Open File Report 00-444. http://pubs.usgs.gov/of/2000/of00-444/ Witter, R.C., Knudsen, K.L, Sowers, J.M., Wentworth, C.M., Koehler, R.D., Randolph, C. E., Brooks, S.K., and Gans, K.D., 2006, Maps of Quaternary Deposits and Liquefaction Susceptibility in the Central San Francisco Bay Region, California: U.S. Geological Survey Open-File Report 06-1037 (http://pubs.usgs.gov/of/2006/1037)

PDF maps of each block in San Francisco created by the San Francisco Office of the Assessor-Recorder. The maps display blocks and parcels with dimensions in feet.

This layer includes 9 annotation features for the county labels for the San Francisco Bay Water Quality Improvment Fund (SFBWQIF) area of interest These features are incorporated in the San Francisco Bay Water Quality Improvement Fund Story Map, an interactive series of maps and QlikSense graphics highlighting the competitive grant program which supports projects to protect and restore San Francisco Bay. The application can be found on the EPA GeoPlatform at: "https://epa.maps.arcgis.com/apps/MapSeries/index.html?appid=db223d22741140b9b10baf7e91815271" "https://epa.maps.arcgis.com/apps/MapSeries/index.html?appid=db223d22741140b9b10baf7e91815271" The story map is also embedded in the following EPA web page: "https://www2.epa.gov/sfbay-delta/sf-bay-water-quality-improvement-fund-interactive-project-map" https://www2.epa.gov/sfbay-delta/sf-bay-water-quality-improvement-fund-interactive-project-map

The Zoning Districts are a component of the Zoning Map which in turn is a key component of the San Francisco Planning Code. More information can be found here: https://sfplanning.org/zoning

This digital map database, compiled from previously published and unpublished data, and new mapping by the authors, represents the general distribution of bedrock and surficial deposits in the mapped area. Together with the accompanying text file (nesfmf.ps, nesfmf.pdf, nesfmf.txt), it provides current information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:62,500 or smaller.

This layer is a georeferenced image of a map titled "Map Of The Outside Lands Of The City And County Of San Francisco Showing Reservations Selected for Public Purposes, under the Provisions of Order No. 800." Date estimated. Chas. H. Stanyan, A.J. Shrader, Beverly Cole, Chas. Clayton and Monroe Ashbury were the members of the Committee on Outside Lands of the Board of Supervisors which published this map. Many of the streets in the Haight Ashbury district were named after the members of the Committee on Outside Lands - these streets appear on this map. With color, perhaps added later. Includes key structures. Property of the San Francisco Public Library. This map is part of the Imagined San Francisco Project. .

The California Association Local Agency Formation Commissions defines a sphere of influence (SOI) as "a planning boundary outside of an agency’s legal boundary (such as the city limit line) that designates the agency’s probable future boundary and service area." This feature set represents the SOIs of the incorporated jurisdictions for the San Francisco Bay Region. The Metropolitan Transportation Commission (MTC) updated the feature set in late 2019 as part of the jurisdiction review process for the BASIS data gathering project. Changes were made to the growth boundaries of the following jurisdictions based on BASIS feedback and associated work: Antioch, Brentwood, Campbell, Daly City, Dublin, Fremont, Hayward, Los Gatos, Monte Sereno, Newark, Oakland, Oakley, Pacifica, Petaluma, Pittsburg, Pleasanton, San Bruno, San Francisco (added to reflect other jurisdictions whose SOI is the same as their jurisdiction boundary), San Jose, San Leandro, Santa Clara, Saratoga, and Sunnyvale. Notes: With the exception of San Mateo and Solano Counties, counties included jurisdiction (city/town) areas as part of their SOI boundary data. San Mateo County and Solano County only provided polygons representing the SOI areas outside the jurisdiction areas. To create a consistent, regional feature set, the Metropolitan Transportation Commission (MTC) added the jurisdiction areas to the original, SOI-only features and dissolved the features by name.Because of differences in base data used by the counties and the MTC, edits were made to the San Mateo County and Solano County SOI features that should have been adjacent to their jurisdiction boundary so the dissolve function would create a minimum number of features. Original sphere of influence boundary acquisitions:Alameda County - CityLimits_SOI.shp received as e-mail attachment from Alameda County Community Development Agency on 30 August 2019 Contra Costa County - BND_LAFCO_Cities_SOI.zip downloaded from https://gis.cccounty.us/Downloads/Planning/ on 15 August 2019Marin County - 'Sphere of Influence - City' feature service data downloaded from Marin GeoHub on 15 August 2019Napa County - city_soi.zip downloaded from their GIS Data Catalog on 15 August 2019 City and County of San Francisco - does not have a sphere of influence San Mateo County - 'Sphere of Influence' feature service data downloaded from San Mateo County GIS open data on 15 August 2019 Santa Clara County - 'City Spheres of Influence' feature service data downloaded from Santa Clara County Planning Office GIS Data on 15 August 2019 Solano County - SphereOfInfluence feature service data downloaded from Solano GeoHub on 15 August 2019 Sonoma County - 'SoCo PRMD GIS Spheres Influence.zip' downloaded from County of Sonoma on 15 August 2019

Incorporated Places (cities and towns) are those reported to the Census Bureau as legally in existence as of May 28, 2021, under the laws of their respective states. Features were extracted from, and clipped using, California 2020 TIGER/Line shapefiles by the Metropolitan Transportation Commission. An incorporated place provides governmental functions for a concentration of people, as opposed to a minor civil division, which generally provides services or administers an area without regard, necessarily, to population. Places may extend across county and county subdivision boundaries, but never across state boundaries. An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions.

In 2018, the Golden Gate National Parks Conservancy (Parks Conservancy) (https://parksconservancy.org), non-profit support partner to the National Park Service (NPS) Golden Gate National Recreation Area (GGNRA), initiated a fine scale vegetation mapping project in Marin County. The GGNRA includes lands in San Francisco and San Mateo counties, and NPS expressed interest in pursuing fine scale vegetation mapping for those lands as well. The Parks Conservancy facilitated multiple meetings with potential project stakeholders and was able to build a consortium of funders to map all of San Mateo County (and NPS lands in San Francisco). The consortium included the San Francisco Public Utilities Commission (SFPUC), Midpeninsula Regional Open Space District (MROSD), Peninsula Open Space Trust (POST), San Mateo City/County Association of Governments, and various County of San Mateo departments including Parks, Agricultural Weights and Measures, Public Works/Flood Control District, Office of Sustainability, and Planning and Building. Over a 3-year period, the project, collectively referred to as the “San Mateo Fine Scale Veg Map”, has produced numerous environmental GIS products including 1-foot contours, orthophotography, and other land cover maps. A 106-class fine-scale vegetation map was completed in April 2022 that details vegetation communities and agricultural land cover types, including forests, grasslands, riparian vegetation, wetlands, and croplands. The environmental data products from the San Mateo Fine Scale Veg Map are foundational and can be used by organizations and government departments for a wide range of purposes, including planning, conservation, and to track changes over time to San Mateo County’s habitats and natural resources.Development of the San Mateo fine-scale vegetation map was managed by the Golden Gate National Parks Conservancy and staffed by personnel from Tukman Geospatial (https://tukmangeospatial.com/), Aerial Information Systems (AIS; http://www.aisgis.com/), and Kass Green and Associates. The fine-scale vegetation map effort included field surveys by a team of trained botanists including Neal Kramer, Brett Hall, Lucy Ferneyhough, Brittany Burnett, Patrick Furtado, and Rosie Frederick. Data from these surveys, combined with older surveys from previous efforts, were analyzed by the California Native Plant Society (CNPS) Vegetation Program (https://www.cnps.org/vegetation), with support from the California Department of Fish and Wildlife Vegetation Classification and Mapping Program (VegCAMP; https://wildlife.ca.gov/Data/VegCAMP) and ecologists with NatureServe (https://www.natureserve.org/) to develop a San Mateo County-specific vegetation classification. For more information on the field sampling and vegetation classification work San Mateo County Fine Scale Vegetation Map Final Report refer to the final report (https://nrm.dfg.ca.gov/FileHandler.ashx?DocumentID=212663) issued by CNPS and corresponding floristic descriptions (https://nrm.dfg.ca.gov/FileHandler.ashx?DocumentID=212666 and https://nrm.dfg.ca.gov/FileHandler.ashx?DocumentID=212667).Existing lidar data, collected in 2017 by San Mateo County was used to support the project. The lidar point cloud, and many of its derivatives, were used extensively during the process of developing the fine-scale vegetation and habitat map. The lidar data was used in conjunction with optical data. Optical data used throughout the project included 6-inch resolution airborne 4-band imagery collected in the summer of 2018, as well as various dates of National Agriculture Imagery Program (NAIP) imagery. Key data sets used in the lifeform and the enhanced lifeform mapping process include high resolution aerial imagery from 2018, the lidar-derived Canopy Height Model (CHM), and several other lidar-derived raster and vector datasets. In addition, a number of forest structure lidar derivatives are used in the machine learning portion of the enhanced lifeform workflow.In 2020, an enhanced lifeform map was produced which serves as the foundation for the much more floristically detailed fine-scale vegetation and habitat map. The lifeform map was developed using expert systems rulesets in Trimble Ecognition®, followed by manual editing.In 2020, Tukman Geospatial staff and partners conducted countywide reconnaissance field work to support fine-scale mapping. Field-collected data were used to train automated machine learning algorithms, which produced a fully automated countywide fine-scale vegetation and habitat map. Throughout 2021, AIS manually edited the fine-scale maps, and Tukman Geospatial and AIS went to the field for validation trips to inform and improve the manual editing process. In early January of 2022, draft maps were distributed and reviewed by San Mateo County’s community of land managers and by the funders of the project. Input from these groups was used to further refine the map. The countywide fine-scale vegetation map and related data products were made public in April 2022. In total, 106 vegetation classes were mapped. During the classification development phase, minimum mapping units (MMUs) were established for the vegetation mapping project. An MMU is the smallest area to be mapped on the ground. For this project, the mapping team chose to map different features at different MMUs. The MMU is 1/4 acre for agricultural, woody riparian, and wetland herbaceous classes; 1/2 acre for woody upland, upland herbaceous, and bare land classes; 1/5 acre for developed feature types; and 400 square feet for water.Accuracy assessment plot data were collected in 2021 and 2022. Accuracy assessment results were compiled and analyzed in the April of 2022. Overall accuracy of the lifeform map is 98 percent. Overall accuracy of the fine-scale vegetation map is 83.5 percent, with an overall ‘fuzzy’ accuracy of 90.8 percent.

This is a conversion of Wentworth and others (2023)[DAS1] to the Geologic Map Schema (GeMS) for inclusion in the National Geologic Map Database. The original publication was in the Alacarte schema commonly used for geologic map databases prior to the release of the now mandatory GeMS. The GIS layers in this release have the same scientific content as the source data release. The source data release lacks description of map units, however, so those have been copied verbatim from the two principal sources for that work (Witter and others, 2006 [DAS2]; Knudsen and others, 2000 [DAS3]).

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The All Roads Shapefile includes all features within the MTDB Super Class "Road/Path Features" distinguished where the MAF/TIGER Feature Classification Code (MTFCC) for the feature in MTDB that begins with "S". This includes all primary, secondary, local neighborhood, and rural roads, city streets, vehicular trails (4wd), ramps, service drives, alleys, parking lot roads, private roads for service vehicles (logging, oil fields, ranches, etc.), bike paths or trails, bridle/horse paths, walkways/pedestrian trails, stairways, and winter trails.

As of November 2023, this map has been updated to use a new format. For details, please see here.
Bay area county areas

This shapefile contains tax rate area (TRA) boundaries in San Francisco County for the specified assessment roll year. Boundary alignment is based on the 2014 county parcel map. A tax rate area (TRA) is a geographic area within the jurisdiction of a unique combination of cities, schools, and revenue districts that utilize the regular city or county assessment roll, per Government Code 54900. Each TRA is assigned a six-digit numeric identifier, referred to as a TRA number. TRA = tax rate area number

This digital map database, compiled from previously published and unpublished data, and new mapping by the authors, represents the general distribution of bedrock and surficial deposits in the mapped area. Together with the accompanying text file (oakmf.ps, oakmf.pdf, oakmf.txt), it provides current information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:24,000 or smaller.

The San Francisco Bay Region Jurisdictions feature set was developed by the Metropolitan Transportation Commission so tables containing values for both incorporated and unincorporated areas could be joined to a spatial feature set for mapping and analysis. County-level, 2020 TIGER/Line shapefiles, current as of May 28, 2021, were used to develop this feature set. Incorporated places (cities and towns) were erased from the county shapefile for the region. The remaining county areas (unincorporated lands) were then added to the incorporated places to produce a full, incorporated-unincorporated feature set for the region. For the final processing step, major water features were clipped from the jurisdiction feature set so only land areas remained.

WARNING: This is a pre-release dataset and its fields names and data structures are subject to change. It should be considered pre-release until the end of 2024. Expected changes:Metadata is missing or incomplete for some layers at this time and will be continuously improved.We expect to update this layer roughly in line with CDTFA at some point, but will increase the update cadence over time as we are able to automate the final pieces of the process.This dataset is continuously updated as the source data from CDTFA is updated, as often as many times a month. If you require unchanging point-in-time data, export a copy for your own use rather than using the service directly in your applications.PurposeCounty and incorporated place (city) boundaries along with third party identifiers used to join in external data. Boundaries are from the authoritative source the California Department of Tax and Fee Administration (CDTFA), altered to show the counties as one polygon. This layer displays the city polygons on top of the County polygons so the area isn"t interrupted. The GEOID attribute information is added from the US Census. GEOID is based on merged State and County FIPS codes for the Counties. Abbreviations for Counties and Cities were added from Caltrans Division of Local Assistance (DLA) data. Place Type was populated with information extracted from the Census. Names and IDs from the US Board on Geographic Names (BGN), the authoritative source of place names as published in the Geographic Name Information System (GNIS), are attached as well. Finally, the coastline is used to separate coastal buffers from the land-based portions of jurisdictions. This feature layer is for public use.Related LayersThis dataset is part of a grouping of many datasets:Cities: Only the city boundaries and attributes, without any unincorporated areasWith Coastal BuffersWithout Coastal BuffersCounties: Full county boundaries and attributes, including all cities within as a single polygonWith Coastal BuffersWithout Coastal BuffersCities and Full Counties: A merge of the other two layers, so polygons overlap within city boundaries. Some customers require this behavior, so we provide it as a separate service.With Coastal Buffers (this dataset)Without Coastal BuffersPlace AbbreviationsUnincorporated Areas (Coming Soon)Census Designated Places (Coming Soon)Cartographic CoastlinePolygonLine source (Coming Soon)Working with Coastal BuffersThe dataset you are currently viewing includes the coastal buffers for cities and counties that have them in the authoritative source data from CDTFA. In the versions where they are included, they remain as a second polygon on cities or counties that have them, with all the same identifiers, and a value in the COASTAL field indicating if it"s an ocean or a bay buffer. If you wish to have a single polygon per jurisdiction that includes the coastal buffers, you can run a Dissolve on the version that has the coastal buffers on all the fields except COASTAL, Area_SqMi, Shape_Area, and Shape_Length to get a version with the correct identifiers.Point of ContactCalifornia Department of Technology, Office of Digital Services, odsdataservices@state.ca.govField and Abbreviation DefinitionsCOPRI: county number followed by the 3-digit city primary number used in the Board of Equalization"s 6-digit tax rate area numbering systemPlace Name: CDTFA incorporated (city) or county nameCounty: CDTFA county name. For counties, this will be the name of the polygon itself. For cities, it is the name of the county the city polygon is within.Legal Place Name: Board on Geographic Names authorized nomenclature for area names published in the Geographic Name Information SystemGNIS_ID: The numeric identifier from the Board on Geographic Names that can be used to join these boundaries to other datasets utilizing this identifier.GEOID: numeric geographic identifiers from the US Census Bureau Place Type: Board on Geographic Names authorized nomenclature for boundary type published in the Geographic Name Information SystemPlace Abbr: CalTrans Division of Local Assistance abbreviations of incorporated area namesCNTY Abbr: CalTrans Division of Local Assistance abbreviations of county namesArea_SqMi: The area of the administrative unit (city or county) in square miles, calculated in EPSG 3310 California Teale Albers.COASTAL: Indicates if the polygon is a coastal buffer. Null for land polygons. Additional values include "ocean" and "bay".GlobalID: While all of the layers we provide in this dataset include a GlobalID field with unique values, we do not recommend you make any use of it. The GlobalID field exists to support offline sync, but is not persistent, so data keyed to it will be orphaned at our next update. Use one of the other persistent identifiers, such as GNIS_ID or GEOID instead.AccuracyCDTFA"s source data notes the following about accuracy:City boundary changes and county boundary line adjustments filed with the Board of Equalization per Government Code 54900. This GIS layer contains the boundaries of the unincorporated county and incorporated cities within the state of California. The initial dataset was created in March of 2015 and was based on the State Board of Equalization tax rate area boundaries. As of April 1, 2024, the maintenance of this dataset is provided by the California Department of Tax and Fee Administration for the purpose of determining sales and use tax rates. The boundaries are continuously being revised to align with aerial imagery when areas of conflict are discovered between the original boundary provided by the California State Board of Equalization and the boundary made publicly available by local, state, and federal government. Some differences may occur between actual recorded boundaries and the boundaries used for sales and use tax purposes. The boundaries in this map are representations of taxing jurisdictions for the purpose of determining sales and use tax rates and should not be used to determine precise city or county boundary line locations. COUNTY = county name; CITY = city name or unincorporated territory; COPRI = county number followed by the 3-digit city primary number used in the California State Board of Equalization"s 6-digit tax rate area numbering system (for the purpose of this map, unincorporated areas are assigned 000 to indicate that the area is not within a city).Boundary ProcessingThese data make a structural change from the source data. While the full boundaries provided by CDTFA include coastal buffers of varying sizes, many users need boundaries to end at the shoreline of the ocean or a bay. As a result, after examining existing city and county boundary layers, these datasets provide a coastline cut generally along the ocean facing coastline. For county boundaries in northern California, the cut runs near the Golden Gate Bridge, while for cities, we cut along the bay shoreline and into the edge of the Delta at the boundaries of Solano, Contra Costa, and Sacramento counties.In the services linked above, the versions that include the coastal buffers contain them as a second (or third) polygon for the city or county, with the value in the COASTAL field set to whether it"s a bay or ocean polygon. These can be processed back into a single polygon by dissolving on all the fields you wish to keep, since the attributes, other than the COASTAL field and geometry attributes (like areas) remain the same between the polygons for this purpose.SliversIn cases where a city or county"s boundary ends near a coastline, our coastline data may cross back and forth many times while roughly paralleling the jurisdiction"s boundary, resulting in many polygon slivers. We post-process the data to remove these slivers using a city/county boundary priority algorithm. That is, when the data run parallel to each other, we discard the coastline cut and keep the CDTFA-provided boundary, even if it extends into the ocean a small amount. This processing supports consistent boundaries for Fort Bragg, Point Arena, San Francisco, Pacifica, Half Moon Bay, and Capitola, in addition to others. More information on this algorithm will be provided soon.Coastline CaveatsSome cities have buffers extending into water bodies that we do not cut at the shoreline. These include South Lake Tahoe and Folsom, which extend into neighboring lakes, and San Diego and surrounding cities that extend into San Diego Bay, which our shoreline encloses. If you have feedback on the exclusion of these items, or others, from the shoreline cuts, please reach out using the contact information above.Offline UseThis service is fully enabled for sync and export using Esri Field Maps or other similar tools. Importantly, the GlobalID field exists only to support that use case and should not be used for any other purpose (see note in field descriptions).Updates and Date of ProcessingConcurrent with CDTFA updates, approximately every two weeks, Last Processed: 12/17/2024 by Nick Santos using code path at https://github.com/CDT-ODS-DevSecOps/cdt-ods-gis-city-county/ at commit 0bf269d24464c14c9cf4f7dea876aa562984db63. It incorporates updates from CDTFA as of 12/12/2024. Future updates will include improvements to metadata and update frequency.

Special Use Districts City and County of San Francisco Planning Department. The Special Use Districts are a component of the Zoning Map. The Zoning - Map comprises: - Zoning Districts - Height and Bulk Districts - Special Use Districts - Preservation Districts - Coastal Zone Area - Sprcial Sign Districts The official Zoning Map can be found in the San Francisco Planning Code: http://library.municode.com/index.aspx?clientId=14145&stateId=5&stateName=California (click on the links under ZONING MAPS on the left navigation column). Sec 235 of the Planning Code states: "In addition to the use districts that are established by Section 201 of this Code, there shall also be in the City such special use districts as are established in this Section and Sections 236 through 249.5, in order to carry out further the purposes of this Code. The designations, locations and boundaries of these special use districts shall be as provided in Sections 236 through 249.5, and as shown on the Zoning Map referred to in Section 105 of this Code, subject to the provisions of Section 105. The original of the numbered sectional maps of the Zoning Map for Special Use Districts referred to in Sections 236 through 249.5 is on file with the Clerk of the Board of Supervisors under File No. 191-67-2. and No. 273.80. In any special use district the provisions of the applicable use district established by Section 201 shall prevail, except as specifically provided in Sections 236 through 249.5."

This raster dataset depicts a final version of the Coarse Filter Vegetation Map as a 30 meter grid with 61 cover types, 51 of which are natural or semi-natural land cover, for the nine county San Francisco Bay Area Region, California. See Resource Details for detailed data compilation description. This data was compiled from data sourced from the United States Department of Agriculture Forest Service, The Nature Conservancy and the California Department of Forestry and Fire.