COB_POLY: This theme shows the jurisdictional and cartographic county areas for Oregon and Washington. The POCA layer is an integrated set of geographic- referencing data covering the state of Washington. It is derived from land surveys, DNR orthophotos, USGS 7.5' quadrangles, and DNR tract books.

To access the tax lot layer you will need to contact the county Assessor's office. ORMAP is a statewide digital cadastral base map that is publicly accessible, continually maintained, supports the Oregon property tax system, supports a multi-purpose land information system, strives to comply with appropriate state and national standards, and will continue to be improved over time.

Map showing public lands in Jackson County. The map document is 34 inches by 44 inches.

This product is for informational purposes and may not have been prepared for, or be suitable for legal, engineering, or surveying purposes.

Users of this information should review or consult the primary data and information sources to ascertain the usability of the information.

General base map of Washington County, Oregon

Scoggins Dam in northwest Oregon lies within the Gales Creek fault zone (GCF), a northwest-striking system of active faults forming the boundary between the Coast Range and the Tualatin Valley about 25 km east of Portland, Oregon. Geologic mapping published in 2020 shows the dam to lie within a block-faulted releasing stepover between the right-lateral, NW-striking Scoggins Creek and Parsons Creek strands of the GCF. The Scoggins Creek strand is presently mapped beneath the existing dam about 200 m north of the south abutment. Preliminary results from paleoseismic trenching by the U.S. Bureau of Reclamation, Portland State University, and the U.S. Geological Survey indicate that these two major fault strands have had multiple surface rupturing earthquakes in the Holocene. To confirm the accuracy of the 2020 geologic map and the geometry of the GCF in the releasing stepover region, we completed additional geologic mapping of the dam, reservoir, and an alternative dam site downstream between July 2018 and May 2020. Using high-resolution lidar topographic data and satellite imagery on handheld digital tablets, we collected data at ~500 field sites in the heavily forested terrain. We used these detailed field observations to locate and digitally map the main Scoggins Creek and Parsons Creek fault strands, as well as the cross faults linking the two main strands, to produce an improved and more detailed geologic map and cross sections of Scoggins Valley and its existing and proposed dam sites.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally- recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. For the 2010 Census, the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs for Census 2000 to having MCDs for the 2010 Census. In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The boundaries of most legal MCDs are as of January 1, 2019, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries of all CCDs, delineated in 20 states, are those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

This Zoning feature class is an element of the Oregon GIS Framework statewide, Zoning spatial data. This version is authorized for public use. Attributes include zoning districts that have been generalized to state classes. As of June 30, 2023, this feature class contains zoning data from 229 local jurisdictions. DLCD plans to continue adding to and updating this statewide zoning dataset as they receive zoning information from the local jurisdictions. Jurisdictions included in the latest version of the statewide zoning geodatabase:

Cities: Adams, Adrian, Albany, Amity, Antelope, Ashland, Astoria, Athena, Aurora, Banks, Barlow, Bay City, Beaverton, Bend, Boardman, Bonanza, Brookings, Brownsville, Burns, Butte Falls, Canby, Cannon Beach, Carlton, Cascade Locks, Cave Junction, Central Point, Chiloquin, Coburg, Columbia City, Coos Bay, Cornelius, Corvallis, Cottage Grove, Creswell, Culver, Dayton, Detroit, Donald, Drain, Dufur, Dundee, Dunes City, Durham, Eagle Point, Echo, Enterprise, Estacada, Eugene, Fairview, Falls City, Florence, Forest Grove, Fossil, Garibaldi, Gaston, Gates, Gearhart, Gervais, Gladstone, Gold Beach, Gold Hill, Grants Pass, Grass Valley, Gresham, Halsey, Happy Valley, Harrisburg, Helix, Hermiston, Hillsboro, Hines, Hood River, Hubbard, Idanha, Independence, Jacksonville, Jefferson, Johnson City, Jordan Valley, Junction City, Keizer, King City, Klamath Falls, La Grande, La Pine, Lafayette, Lake Oswego, Lebanon, Lincoln City, Lowell, Lyons, Madras, Malin, Manzanita, Maupin, Maywood Park, McMinnville, Medford, Merrill, Metolius, Mill City, Millersburg, Milton-Freewater, Milwaukie, Mitchell, Molalla, Monmouth, Moro, Mosier, Mount Angel, Myrtle Creek, Myrtle Point, Nehalem, Newberg, Newport, North Bend, North Plains, Nyssa, Oakridge, Ontario, Oregon City, Pendleton, Philomath, Phoenix, Pilot Rock, Port Orford, Portland, Prescott, Prineville, Rainier, Redmond, Reedsport, Rivergrove, Rockaway Beach, Rogue River, Roseburg, Rufus, Saint Helens, Salem, Sandy, Scappoose, Scio, Scotts Mills, Seaside, Shady Cove, Shaniko, Sheridan, Sherwood, Silverton, Sisters, Sodaville, Spray, Springfield, Stanfield, Stayton, Sublimity, Sutherlin, Sweet Home, Talent, Tangent, The Dalles, Tigard, Tillamook, Toledo, Troutdale, Tualatin, Turner, Ukiah, Umatilla, Vale, Veneta, Vernonia, Warrenton, Wasco, Waterloo, West Linn, Westfir, Weston, Wheeler, Willamina, Wilsonville, Winston, Wood Village, Woodburn, Yamhill.

Counties: Baker County, Benton County, Clackamas County, Clatsop County, Columbia County, Coos County, Crook County, Curry County, Deschutes County, Douglas County, Harney County, Hood River County, Jackson County, Jefferson County, Josephine County, Klamath County, Lane County, Lincoln County, Linn County, Malheur County, Marion County, Multnomah County, Polk County, Sherman County, Tillamook County, Umatilla County, Union County, Wasco County, Washington County, Wheeler County, Yamhill County.

R emaining jurisdictions either chose not to share data to incorporate into the public, statewide dataset or did not respond to DLCD’s request for data. These jurisdictions’ attributes are designated “not shared” in the orZDesc field and “NS” in the orZCode field.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).

The spatial representation of the PLSS Townships in the Marion County area of Oregon.

The 2020 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or no MCD is defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The generalized boundaries of legal MCDs are based on those as of January 1, 2020 as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CCDs, delineated in 21 states, are those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

COB_ARC: This theme shows line representation of the jurisdictional and cartographic county perimeters for Oregon and Washington.

The taxlot layer contains all parcels in Deschutes County, as found on the county Assessor's Maps. The taxlot layer is the basis for many other layers; that is, other layers were built using the taxlot layer as the location control.

This dataset includes tax lots in Jackson County, Oregon.

This data is maintained by and obtained from Metro GIS. Click the link above to view the Metro GIS metadata for this dataset.

This data is maintained by and obtained from Metro Data Resource Center. Please go to https://gis.oregonmetro.gov/rlis-metadata/#/details/155 for the complete metadata.-- Additional Information: Category: Boundary Purpose: For use as a "base" layer on map products to shade county areas and in analysis to capture areas within each county. Update Frequency: None planned-- Metadata Link: https://www.portlandmaps.com/metadata/index.cfm?&action=DisplayLayer&LayerID=155

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12000.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12000.

Heavy rainfall during mid-November 1996 induced debris flows throughout the southern Oregon Coast Range, including more than 150 in the immediate vicinity of north Charlotte Creek (Coe and others, 2011). Data in this project pertain to a 2.4-km2 area centered at N 43.65° and W 123.94° which an area where high concentrations of debris flows occurred. These data include a subset of a map of landslide and debris flow polygons (Coe and others, 2011) and raster grids derived from a lidar dataset acquired in 2008 – 2009 (https://gis.dogami.oregon.gov/maps/lidarviewer/). The project area covers a tributary basin west of Charlotte Creek, southwest of the Umpqua River, and is in the southern part of the Deer Head Point 7.5-minute quadrangle. These data were used to test an implementation of the Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Model (TRIGRS, see Baum and others, 2011) for the timing and distribution of rainfall-induced shallow landslides, a simplified three-dimensional slope stability analysis method (Baum and others, 2012), and for testing soil depth models (Baum, 2017).

County tax assessors tax lots, including rights of way, with associated property data, excluding ownership information. Selected items from each county assessor's file are included and standardized for all three counties. The tax lot spatial features and data associated with the tax lot are compiled by Metro from existing records created and maintained by the local county assessment and taxation offices. This is a downloadable zip file that includes the taxlots shapefile and layer files for visualizing taxlots with or without right of ways. Use the original feature layers if viewing the layers in ArcGIS Online: "Taxlots (Public)" or "Taxlots with Right of Way (Public)." Date of last data update: 2025-10-17 This is official RLIS data. Contact Person: Christine Rutan christine.rutan@oregonmetro.gov 503-797-1669 RLIS Metadata Viewer: https://gis.oregonmetro.gov/rlis-metadata/#/details/3733 RLIS Terms of Use: https://rlisdiscovery.oregonmetro.gov/pages/terms-of-use

Map of Livestock districts in Jackson County. The page size is 34 inches by 44 inches.