On December 19, 2022, there were 3,553 new cases of COVID-19 in New York City. The state of New York has been one of the hardest hit U.S. states by the COVID-19 pandemic. This statistic shows the number of new COVID-19 cases in New York City from March 8, 2020 to December 19, 2022, by diagnosis date.

As of December 16, 2022, there had been almost 6.37 million COVID-19 cases in New York State, with 2.97 million cases found in New York City. New York has been one of the U.S. states most impacted by the pandemic, recording the highest number of deaths in the country.

A closer look at the outbreak in New York Towards the middle of December 2022, the number of deaths due to the coronavirus in New York State had reached almost 60 thousand, and almost half of those deaths were in New York City. However, the number of new daily deaths in New York City peaked early in the pandemic and although there have been times when the number of new daily deaths surged, they have not gotten close to reaching the levels seen at the beginning of the pandemic. New York City is made up of five counties, which are more commonly known by their borough names – Staten Island is the borough with the highest rate of COVID-19 cases.

The New York Times is releasing a series of data files with cumulative counts of coronavirus cases in the United States, at the state and county level, over time. We are compiling this time series data from state and local governments and health departments in an attempt to provide a complete record of the ongoing outbreak.

Since the first reported coronavirus case in Washington State on Jan. 21, 2020, The Times has tracked cases of coronavirus in real time as they were identified after testing. Because of the widespread shortage of testing, however, the data is necessarily limited in the picture it presents of the outbreak.

We have used this data to power our maps and reporting tracking the outbreak, and it is now being made available to the public in response to requests from researchers, scientists and government officials who would like access to the data to better understand the outbreak.

The data begins with the first reported coronavirus case in Washington State on Jan. 21, 2020. We will publish regular updates to the data in this repository.

Daily count of NYC residents who tested positive for SARS-CoV-2, who were hospitalized with COVID-19, and deaths among COVID-19 patients.

Note that this dataset currently pulls from https://raw.githubusercontent.com/nychealth/coronavirus-data/master/case-hosp-death.csv on a daily basis.

The number of positive COVID-19 cases in the state of New York reached almost 1.7 million by March 7, 2021. The first case of the novel coronavirus in New York State was confirmed at the start of March 2020.

New Yorkers urged to work from home The coronavirus has caused widespread suffering, and New York is among the states with the highest number of COVID-19 cases in the United States. A quick and aggressive response to the initial outbreak was required as the virus stretched hospitals in New York State to their maximum capacity. In mid-March 2020, Governor Andrew Cuomo ordered all workers in non-essential businesses to work from home. As part of the state’s reopening plans in 2021, remote work continues to be encouraged and remains one of the best ways to prevent the spread of COVID-19.

The importance of coronavirus testing As of March 6, 2021, there had been almost 40 million COVID-19 tests in New York State, meaning it was one of the states with the highest number of coronavirus tests conducted in the U.S. Widespread testing, which also includes testing people with no symptoms, is essential for tracking the true spread of the coronavirus. By identifying more positive infections, health authorities can quickly manage the areas with high cases, and states can avoid tighter restrictions in the weeks and months ahead.

Note: This dataset is no longer being updated as of September 1, 2023. This dataset includes information on the number of tests of individuals for COVID-19 infection by zip code performed in New York State beginning March 1, 2020, when the first case of COVID-19 was identified in the state. The primary goal of publishing this dataset is to provide users timely information about local disease spread and reporting of positive cases. The data will be updated weekly, reflecting tests completed by 2:00 pm on the day prior to the date of the update.

Note: On November 14, 2020, only 14 hours of laboratory data was collected and shared. The 2:00 pm cutoff time was implemented, allowing the NYSDOH to enhance data quality reviews. All other published laboratory data represented 24 hours of data collection. Prior to November 14, 2020 data reflected tests completed by 12:00 am (midnight) the day of the update (i.e., all tests reported by the end of the day on the day before the update).

As of April 4, 2022, the Department of Health and Human Services (HHS) no longer requires entities conducting COVID testing to report negative or indeterminate antigen test results. This may impact the number and interpretation of total test results reported to the state and also impacts calculation of test percent positivity. Total positives continues to include both PCR and antigen positive test results.

As of December 22, 2022, those aged 18 to 24 years had the highest rates of COVID-19 in New York City. The state of New York has been one of the hardest hit U.S. states by the COVID-19 pandemic. This statistic shows rates of COVID-19 cases in New York City by age group, as of December 22, 2022.

The New York Times is releasing a series of data files with cumulative counts of coronavirus cases in the United States, at the state and county level, over time. We are compiling this time series data from state and local governments and health departments in an attempt to provide a complete record of the ongoing outbreak.

Since late January, The Times has tracked cases of coronavirus in real time as they were identified after testing. Because of the widespread shortage of testing, however, the data is necessarily limited in the picture it presents of the outbreak.

We have used this data to power our maps and reporting tracking the outbreak, and it is now being made available to the public in response to requests from researchers, scientists and government officials who would like access to the data to better understand the outbreak.

The data begins with the first reported coronavirus case in Washington State on Jan. 21, 2020. We will publish regular updates to the data in this repository.

United States Data

Data on cumulative coronavirus cases and deaths can be found in two files for states and counties.

Each row of data reports cumulative counts based on our best reporting up to the moment we publish an update. We do our best to revise earlier entries in the data when we receive new information.

Both files contain FIPS codes, a standard geographic identifier, to make it easier for an analyst to combine this data with other data sets like a map file or population data.

State-Level Data

State-level data can be found in the us-states.csv file.

date,state,fips,cases,deaths
2020-01-21,Washington,53,1,0
...

County-Level Data

County-level data can be found in the us-counties.csv file.

date,county,state,fips,cases,deaths
2020-01-21,Snohomish,Washington,53061,1,0
...

In some cases, the geographies where cases are reported do not map to standard county boundaries. See the list of geographic exceptions for more detail on these.

Github Repository

This dataset contains COVID-19 data for the United States of America made available by The New York Times on github at https://github.com/nytimes/covid-19-data

This dataset includes information on all positive tests of individuals for COVID-19 infection performed in New York State beginning March 1, 2020, when the first case of COVID-19 was identified in the state. The primary goal of publishing this dataset is to provide users timely information about local disease spread and COVID-19 case rates by age group. The data will be updated weekly, reflecting tests reported by 12:00 AM three days prior to the date of the update.

Total positives includes both PCR and antigen positive test results.

Note: This is an updated version of the statewide cases by age dataset that includes all reported cases, both first infections and reinfections. An archived version of the prior dataset, which includes only first infections, is available: https://health.data.ny.gov/d/h8ay-wryy

This dataset shows daily confirmed and probable cases of COVID-19 in New York City by date of specimen collection. Total cases has been calculated as the sum of daily confirmed and probable cases. Seven-day averages of confirmed, probable, and total cases are also included in the dataset. A person is classified as a confirmed COVID-19 case if they test positive with a nucleic acid amplification test (NAAT, also known as a molecular test; e.g. a PCR test). A probable case is a person who meets the following criteria with no positive molecular test on record: a) test positive with an antigen test, b) have symptoms and an exposure to a confirmed COVID-19 case, or c) died and their cause of death is listed as COVID-19 or similar. As of June 9, 2021, people who meet the definition of a confirmed or probable COVID-19 case >90 days after a previous positive test (date of first positive test) or probable COVID-19 onset date will be counted as a new case. Prior to June 9, 2021, new cases were counted ≥365 days after the first date of specimen collection or clinical diagnosis. Any person with a residence outside of NYC is not included in counts. Data is sourced from electronic laboratory reporting from the New York State Electronic Clinical Laboratory Reporting System to the NYC Health Department. All identifying health information is excluded from the dataset.

These data are used to evaluate the overall number of confirmed and probable cases by day (seven day average) to track the trajectory of the pandemic. Cases are classified by the date that the case occurred. NYC COVID-19 data include people who live in NYC. Any person with a residence outside of NYC is not included.

This dataset includes information on school reported COVID-19 testing and case positive data from the 2021-2022 academic year. Data was collected from private schools on each operational day using the daily school survey form, which school administrators access by logging in to the NYSDOH school survey website.

The primary goal of publishing this dataset is to provide users timely information about disease spread and reporting of positive cases within schools. The data will be updated daily, reflecting data submitted by school administrators the previous day.

The New York Times is releasing a series of data files with cumulative counts of coronavirus cases in the United States, at the state and county level, over time. This time series data is being compiled from state and local governments and health departments in an attempt to provide a complete record of the ongoing outbreak. This deposit contains live data from three geographic levels: U.S., states and counties. ICPSR staff scraped these data on 11/22/2020. For the most current data, please visit https://github.com/nytimes/covid-19-data.

In the state of New York, Richmond and Rockland have the highest coronavirus case rates when adjusted for the population of a county. Rockland County had around 1,404 positive cases per 10,000 people as of April 19, 2021.

The five boroughs of NYC With around 894,400 positive infections as of mid-April 2021, New York City has the highest number of coronavirus cases in New York State – this means that there were approximately 1,065 cases per 10,000 people. New York City is composed of five boroughs; each borough is coextensive with a county of New York State. Staten Island is the smallest in terms of population, but it is the borough with the highest rate of COVID-19 cases.

Public warned against complacency The number of new COVID-19 cases in New York City spiked for the second time as the winter holiday season led to an increase in social gatherings. New York State is slowly recovering – indoor dining reopened in February 2021 – but now is not the time for people to become complacent. Despite the positive rollout of vaccines, experts have urged citizens to adhere to guidelines and warned that face masks might have to be worn for at least another year.

Updates

• Notice of data discontinuation: Since the start of the pandemic, AP has reported case and death counts from data provided by Johns Hopkins University. Johns Hopkins University has announced that they will stop their daily data collection efforts after March 10. As Johns Hopkins stops providing data, the AP will also stop collecting daily numbers for COVID cases and deaths. The HHS and CDC now collect and visualize key metrics for the pandemic. AP advises using those resources when reporting on the pandemic going forward.

  • CDC Weekly case and death counts (national and state level)
  • CDC County level cases and deaths
  • HHS New hospital admissions
  • CDC NowCast COVID variant proportions (national and regional level)

• April 9, 2020

  • The population estimate data for New York County, NY has been updated to include all five New York City counties (Kings County, Queens County, Bronx County, Richmond County and New York County). This has been done to match the Johns Hopkins COVID-19 data, which aggregates counts for the five New York City counties to New York County.

• April 20, 2020

  • Johns Hopkins death totals in the US now include confirmed and probable deaths in accordance with CDC guidelines as of April 14. One significant result of this change was an increase of more than 3,700 deaths in the New York City count. This change will likely result in increases for death counts elsewhere as well. The AP does not alter the Johns Hopkins source data, so probable deaths are included in this dataset as well.

• April 29, 2020

  • The AP is now providing timeseries data for counts of COVID-19 cases and deaths. The raw counts are provided here unaltered, along with a population column with Census ACS-5 estimates and calculated daily case and death rates per 100,000 people. Please read the updated caveats section for more information.

• September 1st, 2020

  • Johns Hopkins is now providing counts for the five New York City counties individually.

• February 12, 2021

  • The Ohio Department of Health recently announced that as many as 4,000 COVID-19 deaths may have been underreported through the state’s reporting system, and that the "daily reported death counts will be high for a two to three-day period."
  • Because deaths data will be anomalous for consecutive days, we have chosen to freeze Ohio's rolling average for daily deaths at the last valid measure until Johns Hopkins is able to back-distribute the data. The raw daily death counts, as reported by Johns Hopkins and including the backlogged death data, will still be present in the new_deaths column.

• February 16, 2021

  - Johns Hopkins has reconciled Ohio's historical deaths data with the state.

  Overview

The AP is using data collected by the Johns Hopkins University Center for Systems Science and Engineering as our source for outbreak caseloads and death counts for the United States and globally.

The Hopkins data is available at the county level in the United States. The AP has paired this data with population figures and county rural/urban designations, and has calculated caseload and death rates per 100,000 people. Be aware that caseloads may reflect the availability of tests -- and the ability to turn around test results quickly -- rather than actual disease spread or true infection rates.

This data is from the Hopkins dashboard that is updated regularly throughout the day. Like all organizations dealing with data, Hopkins is constantly refining and cleaning up their feed, so there may be brief moments where data does not appear correctly. At this link, you’ll find the Hopkins daily data reports, and a clean version of their feed.

The AP is updating this dataset hourly at 45 minutes past the hour.

To learn more about AP's data journalism capabilities for publishers, corporations and financial institutions, go here or email kromano@ap.org.

Queries

Use AP's queries to filter the data or to join to other datasets we've made available to help cover the coronavirus pandemic

• Filter cases by state here

• Rank states by their status as current hotspots. Calculates the 7-day rolling average of new cases per capita in each state: https://data.world/associatedpress/johns-hopkins-coronavirus-case-tracker/workspace/query?queryid=481e82a4-1b2f-41c2-9ea1-d91aa4b3b1ac

• Find recent hotspots within your state by running a query to calculate the 7-day rolling average of new cases by capita in each county: https://data.world/associatedpress/johns-hopkins-coronavirus-case-tracker/workspace/query?queryid=b566f1db-3231-40fe-8099-311909b7b687&showTemplatePreview=true

• Join county-level case data to an earlier dataset released by AP on local hospital capacity here. To find out more about the hospital capacity dataset, see the full details.

• Pull the 100 counties with the highest per-capita confirmed cases here

• Rank all the counties by the highest per-capita rate of new cases in the past 7 days here. Be aware that because this ranks per-capita caseloads, very small counties may rise to the very top, so take into account raw caseload figures as well.

Interactive

The AP has designed an interactive map to track COVID-19 cases reported by Johns Hopkins.

@(https://datawrapper.dwcdn.net/nRyaf/15/)

Interactive Embed Code

<iframe title="USA counties (2018) choropleth map Mapping COVID-19 cases by county" aria-describedby="" id="datawrapper-chart-nRyaf" src="https://datawrapper.dwcdn.net/nRyaf/10/" scrolling="no" frameborder="0" style="width: 0; min-width: 100% !important;" height="400"></iframe><script type="text/javascript">(function() {'use strict';window.addEventListener('message', function(event) {if (typeof event.data['datawrapper-height'] !== 'undefined') {for (var chartId in event.data['datawrapper-height']) {var iframe = document.getElementById('datawrapper-chart-' + chartId) || document.querySelector("iframe[src*='" + chartId + "']");if (!iframe) {continue;}iframe.style.height = event.data['datawrapper-height'][chartId] + 'px';}}});})();</script>

Caveats

• This data represents the number of cases and deaths reported by each state and has been collected by Johns Hopkins from a number of sources cited on their website.
• In some cases, deaths or cases of people who've crossed state lines -- either to receive treatment or because they became sick and couldn't return home while traveling -- are reported in a state they aren't currently in, because of state reporting rules.
• In some states, there are a number of cases not assigned to a specific county -- for those cases, the county name is "unassigned to a single county"
• This data should be credited to Johns Hopkins University's COVID-19 tracking project. The AP is simply making it available here for ease of use for reporters and members.
• Caseloads may reflect the availability of tests -- and the ability to turn around test results quickly -- rather than actual disease spread or true infection rates.
• Population estimates at the county level are drawn from 2014-18 5-year estimates from the American Community Survey.
• The Urban/Rural classification scheme is from the Center for Disease Control and Preventions's National Center for Health Statistics. It puts each county into one of six categories -- from Large Central Metro to Non-Core -- according to population and other characteristics. More details about the classifications can be found here.

Johns Hopkins timeseries data - Johns Hopkins pulls data regularly to update their dashboard. Once a day, around 8pm EDT, Johns Hopkins adds the counts for all areas they cover to the timeseries file. These counts are snapshots of the latest cumulative counts provided by the source on that day. This can lead to inconsistencies if a source updates their historical data for accuracy, either increasing or decreasing the latest cumulative count. - Johns Hopkins periodically edits their historical timeseries data for accuracy. They provide a file documenting all errors in their timeseries files that they have identified and fixed here

Attribution

This data should be credited to Johns Hopkins University COVID-19 tracking project

The table US States is part of the dataset New York Times US Coronavirus Database, available at https://redivis.com/datasets/mgcj-asjsw1awy. It contains 20034 rows across 5 variables.

This dataset includes information at the reporting facility level on patients hospitalized, admitted, discharged and fatalities. It also includes information on staffed beds. Patient information collected as part of the HERDS Hospital Survey are lab-confirmed COVID-19 positive. Hospitalized means patients admitted as inpatients in either inpatient or observation beds and does not include patients that were treated and released from an Emergency Department. The title of this dataset was initially the Hospital Electronic Response Data System (HERDS) Hospital Survey: COVID-19 Hospitalizations and Beds. The dataset was changed to its current title on 11/4/2021.

As of December 22, 2022, there have been 2.6 million cases of COVID-19 in New York City, as well as 200,189 hospitalizations, and 37,452 deaths. This statistic shows the number of COVID-19 cases, hospitalizations, and deaths in New York City as of December 22, 2022.

Of the five boroughs of New York City, Stanten Island has the highest rate of coronavirus cases per 100,000 people. Brooklyn – the most populous borough – has around 36,008 cases per 100,000 people, and only Manhattan has a lower case rate.

Brooklyn hit hard by COVID-19 Towards the middle of December 2022, there had been almost 6.37 million positive infections in New York State, and Kings was the county with the highest number of coronavirus cases. Kings County, which has the same boundaries as the borough of Brooklyn, had also recorded the highest number of deaths due to the coronavirus in New York State. Since the start of the pandemic in the U.S., densely populated neighborhoods in Brooklyn and Queens have been severely affected, and government leaders across New York State have had to find solutions to some unprecedented challenges.

This dataset includes information on the number of tests of individuals for COVID-19 infection performed in New York State beginning March 1, 2020, when the first case of COVID-19 was identified in the state. The primary goal of publishing this dataset is to provide users timely information about local disease spread and reporting of positive cases. The data will be updated daily, reflecting tests completed by 12:00 am (midnight) the day of the update (i.e., all tests completed by the end of the day on the day before the update).

Reporting of SARS-CoV2 laboratory testing results is mandated under Part 2 of the New York State Sanitary Code. Clinical laboratories, as defined in Public Health Law (PHL) § 571 electronically report test results to the New York State Department of Health (DOH) via the Electronic Clinical Laboratory Reporting System (ECLRS). The DOH Division of Epidemiology’s Bureau of Surveillance and Data System (BSDS) monitors the reporting and ensures that all positives and negatives are accurately. Test counts reflect those completed on an individual each day. A person may have multiple specimens tested on one day, these would be counted one time, i.e., if two specimens are collected from an individual at the same time and then evaluated, the outcome of the evaluation of those two samples to diagnose the individual is counted as a single test of one person, even though the specimens may be tested separately. Conversely, if an individual is tested on more than one day, the data will show two tests of an individual, one for each date the person was tested.

Test counts are assigned to a county based on this order of preference: 1) the patient’s address, 2) the ordering healthcare provider’s address, or 3) the ordering facility’s address.

This dataset contains information on antibody testing for COVID-19: the number of people who received a test, the number of people with positive results, the percentage of people tested who tested positive, and the rate of testing per 100,000 people, stratified by week of testing. These data can also be accessed here: https://github.com/nychealth/coronavirus-data/blob/master/trends/antibody-by-week.csv Exposure to COVID-19 can be detected by measuring antibodies to the disease in a person’s blood, which can indicate that a person may have had an immune response to the virus. Antibodies are proteins produced by the body’s immune system that can be found in the blood. People can test positive for antibodies after they have been exposed, sometimes when they no longer test positive for the virus itself. It is important to note that the science around COVID-19 antibody tests is evolving rapidly and there is still much uncertainty about what individual antibody test results mean for a single person and what population-level antibody test results mean for understanding the epidemiology of COVID-19 at a population level. These data only provide information on people tested. People receiving an antibody test do not reflect all people in New York City; therefore, these data may not reflect antibody prevalence among all New Yorkers. Increasing instances of screening programs further impact the generalizability of these data, as screening programs influence who and how many people are tested over time. Examples of screening programs in NYC include: employers screening their workers (e.g., hospitals), and long-term care facilities screening their residents. In addition, there may be potential biases toward people receiving an antibody test who have a positive result because people who were previously ill are preferentially seeking testing, in addition to the testing of persons with higher exposure (e.g., health care workers, first responders.) Rates were calculated using interpolated intercensal population estimates updated in 2019. These rates differ from previously reported rates based on the 2000 Census or previous versions of population estimates. The Health Department produced these population estimates based on estimates from the U.S. Census Bureau and NYC Department of City Planning. Antibody tests are categorized based on the date of specimen collection and are aggregated by full weeks starting each Sunday and ending on Saturday. For example, a person whose blood was collected for antibody testing on Wednesday, May 6 would be categorized as tested during the week ending May 9. A person tested twice in one week would only be counted once in that week. This dataset includes testing data beginning April 5, 2020. Data are updated daily, and the dataset preserves historical records and source data changes, so each extract date reflects the current copy of the data as of that date. For example, an extract date of 11/04/2020 and extract date of 11/03/2020 will both contain all records as they were as of that extract date. Without filtering or grouping by extract date, an analysis will almost certainly be miscalculating or counting the same values multiple times. To analyze the most current data, only use the latest extract date. Antibody tests that are missing dates are not included in the dataset; as dates are identified, these events are added. Lags between occurrence and report of cases and tests can be assessed by comparing counts and rates across multiple data extract dates. For further details, visit: • https://www1.nyc.gov/site/doh/covid/covid-19-data.page • https://github.com/nychealth/coronavirus-data