As of 10/22/2020, this dataset is no longer being updated and has been replaced with a new dataset, which can be accessed here: https://data.ct.gov/Health-and-Human-Services/COVID-19-case-rate-per-100-000-population-and-perc/hree-nys2 This dataset includes the average daily COVID-19 case rate per 100,000 population by town over the last two MMWR weeks (https://wwwn.cdc.gov/nndss/document/MMWR_week_overview.pdf). These counts do not include cases among people residing in congregate settings, such as nursing homes, assisted living facilities, or correctional facilities. This dataset will be updated weekly.

DESCRIPTION

Johns Hopkins' county-level COVID-19 case and death data, paired with population and rates per 100,000

SUMMARY Updates April 9, 2020 The population estimate data for New York County, NY has been updated to include all five New York City counties (Kings County, Queens County, Bronx County, Richmond County and New York County). This has been done to match the Johns Hopkins COVID-19 data, which aggregates counts for the five New York City counties to New York County. April 20, 2020 Johns Hopkins death totals in the US now include confirmed and probable deaths in accordance with CDC guidelines as of April 14. One significant result of this change was an increase of more than 3,700 deaths in the New York City count. This change will likely result in increases for death counts elsewhere as well. The AP does not alter the Johns Hopkins source data, so probable deaths are included in this dataset as well. April 29, 2020 The AP is now providing timeseries data for counts of COVID-19 cases and deaths. The raw counts are provided here unaltered, along with a population column with Census ACS-5 estimates and calculated daily case and death rates per 100,000 people. Please read the updated caveats section for more information.

Overview The AP is using data collected by the Johns Hopkins University Center for Systems Science and Engineering as our source for outbreak caseloads and death counts for the United States and globally.

The Hopkins data is available at the county level in the United States. The AP has paired this data with population figures and county rural/urban designations, and has calculated caseload and death rates per 100,000 people. Be aware that caseloads may reflect the availability of tests -- and the ability to turn around test results quickly -- rather than actual disease spread or true infection rates.

This data is from the Hopkins dashboard that is updated regularly throughout the day. Like all organizations dealing with data, Hopkins is constantly refining and cleaning up their feed, so there may be brief moments where data does not appear correctly. At this link, you’ll find the Hopkins daily data reports, and a clean version of their feed.

The AP is updating this dataset hourly at 45 minutes past the hour.

To learn more about AP's data journalism capabilities for publishers, corporations and financial institutions, go here or email kromano@ap.org.

Queries Use AP's queries to filter the data or to join to other datasets we've made available to help cover the coronavirus pandemic

Filter cases by state here

Rank states by their status as current hotspots. Calculates the 7-day rolling average of new cases per capita in each state: https://data.world/associatedpress/johns-hopkins-coronavirus-case-tracker/workspace/query?queryid=481e82a4-1b2f-41c2-9ea1-d91aa4b3b1ac

Find recent hotspots within your state by running a query to calculate the 7-day rolling average of new cases by capita in each county: https://data.world/associatedpress/johns-hopkins-coronavirus-case-tracker/workspace/query?queryid=b566f1db-3231-40fe-8099-311909b7b687&showTemplatePreview=true

Join county-level case data to an earlier dataset released by AP on local hospital capacity here. To find out more about the hospital capacity dataset, see the full details.

Pull the 100 counties with the highest per-capita confirmed cases here

Rank all the counties by the highest per-capita rate of new cases in the past 7 days here. Be aware that because this ranks per-capita caseloads, very small counties may rise to the very top, so take into account raw caseload figures as well.

Interactive Embed Code

Caveats This data represents the number of cases and deaths reported by each state and has been collected by Johns Hopkins from a number of sources cited on their website. In some cases, deaths or cases of people who've crossed state lines -- either to receive treatment or because they became sick and couldn't return home while traveling -- are reported in a state they aren't currently in, because of state reporting rules. In some states, there are a number of cases not assigned to a specific county -- for those cases, the county name is "unassigned to a single county" This data should be credited to Johns Hopkins University's COVID-19 tracking project. The AP is simply making it available here for ease of use for reporters and members. Caseloads may reflect the availability of tests -- and the ability to turn around test results quickly -- rather than actual disease spread or true infection rates. Population estimates at the county level are drawn from 2014-18 5-year estimates from the American Community Survey. The Urban/Rural classification scheme is from the Center for Disease Control and Preventions's National Center for Health Statistics. It puts each county into one of six categories --...

As of 10/22/2020, this dataset is no longer being updated and has been replaced with a new dataset, which can be accessed here: https://data.ct.gov/Health-and-Human-Services/COVID-19-case-rate-per-100-000-population-and-perc/hree-nys2 This dataset includes a count and rate per 100,000 population for COVID-19 cases, a count of COVID-19 PCR diagnostic tests, and a percent positivity rate for tests among people living in community settings for the previous two-week period. Dates are based on date of specimen collection (cases and positivity). A person is considered a new case only upon their first COVID-19 testing result because a case is defined as an instance or bout of illness. If they are tested again subsequently and are still positive, it still counts toward the test positivity metric but they are not considered another case. These case and test counts do not include cases or tests among people residing in congregate settings, such as nursing homes, assisted living facilities, or correctional facilities. These data are updated weekly and reflect the previous two full Sunday-Saturday (MMWR) weeks (https://wwwn.cdc.gov/nndss/document/MMWR_week_overview.pdf). DPH note about change from 7-day to 14-day metrics: Prior to 10/15/2020, these metrics were calculated using a 7-day average rather than a 14-day average. The 7-day metrics are no longer being updated as of 10/15/2020 but the archived dataset can be accessed here: https://data.ct.gov/Health-and-Human-Services/COVID-19-case-rate-per-100-000-population-and-perc/s22x-83rd As you know, we are learning more about COVID-19 all the time, including the best ways to measure COVID-19 activity in our communities. CT DPH has decided to shift to 14-day rates because these are more stable, particularly at the town level, as compared to 7-day rates. In addition, since the school indicators were initially published by DPH last summer, CDC has recommended 14-day rates and other states (e.g., Massachusetts) have started to implement 14-day metrics for monitoring COVID transmission as well. With respect to geography, we also have learned that many people are looking at the town-level data to inform decision making, despite emphasis on the county-level metrics in the published addenda. This is understandable as there has been variation within counties in COVID-19 activity (for example, rates that are higher in one town than in most other towns in the county).

Content

Countries that are not listed in these databases have reported no cases to WHO and no cases were identified in the public domain. The formula to calculate the 14-day cumulative number of reported COVID-19 cases per 100 000 population is (New cases over 14 day period)/Population)*100 000.

As of January 13, 2023, there had been over 270 million confirmed cases of COVID-19 across the whole of Europe since the first confirmed case in January, 2020. Cyprus has the highest incidence of COVID-19 cases among its population in Europe at 71,853 per 100,000 people, followed by a rate of 64,449 in Austria. Slovenia has recorded the third highest rate of cases in Europe at 62,834 cases per 100,000. With almost 38.3 million confirmed cases, France has been the worst affected country in Europe, which translates into a rate of 58,945 cases per 100,000 population.

Current infection rate in Europe San Marino had the highest rate of cases per 100,000 in the past week at 336, as of January 16, 2023. Cyprus and Slovenia had seven day rates of infections at 278 and 181 respectively.

Coronavirus deaths in Europe There have been 2,169,191 recorded COVID-19 deaths in Europe since the beginning of the pandemic. Russia has the highest number of deaths recorded in a European country at over 394 thousand. Bulgaria has the highest death rate from the virus in Europe with approximately 549 deaths per 100,000 as of January 13, followed by Hungary with 496 deaths per 100,000. For further information about the coronavirus pandemic, please visit our dedicated Facts and Figures page.

COVID-19 Trends MethodologyOur goal is to analyze and present daily updates in the form of recent trends within countries, states, or counties during the COVID-19 global pandemic. The data we are analyzing is taken directly from the Johns Hopkins University Coronavirus COVID-19 Global Cases Dashboard, though we expect to be one day behind the dashboard’s live feeds to allow for quality assurance of the data.Revisions added on 4/23/2020 are highlighted.Revisions added on 4/30/2020 are highlighted.Discussion of our assertion of an abundance of caution in assigning trends in rural counties added 5/7/2020. Correction on 6/1/2020Methodology update on 6/2/2020: This sets the length of the tail of new cases to 6 to a maximum of 14 days, rather than 21 days as determined by the last 1/3 of cases. This was done to align trends and criteria for them with U.S. CDC guidance. The impact is areas transition into Controlled trend sooner for not bearing the burden of new case 15-21 days earlier.Reasons for undertaking this work:The popular online maps and dashboards show counts of confirmed cases, deaths, and recoveries by country or administrative sub-region. Comparing the counts of one country to another can only provide a basis for comparison during the initial stages of the outbreak when counts were low and the number of local outbreaks in each country was low. By late March 2020, countries with small populations were being left out of the mainstream news because it was not easy to recognize they had high per capita rates of cases (Switzerland, Luxembourg, Iceland, etc.). Additionally, comparing countries that have had confirmed COVID-19 cases for high numbers of days to countries where the outbreak occurred recently is also a poor basis for comparison.The graphs of confirmed cases and daily increases in cases were fit into a standard size rectangle, though the Y-axis for one country had a maximum value of 50, and for another country 100,000, which potentially misled people interpreting the slope of the curve. Such misleading circumstances affected comparing large population countries to small population counties or countries with low numbers of cases to China which had a large count of cases in the early part of the outbreak. These challenges for interpreting and comparing these graphs represent work each reader must do based on their experience and ability. Thus, we felt it would be a service to attempt to automate the thought process experts would use when visually analyzing these graphs, particularly the most recent tail of the graph, and provide readers with an a resulting synthesis to characterize the state of the pandemic in that country, state, or county.The lack of reliable data for confirmed recoveries and therefore active cases. Merely subtracting deaths from total cases to arrive at this figure progressively loses accuracy after two weeks. The reason is 81% of cases recover after experiencing mild symptoms in 10 to 14 days. Severe cases are 14% and last 15-30 days (based on average days with symptoms of 11 when admitted to hospital plus 12 days median stay, and plus of one week to include a full range of severely affected people who recover). Critical cases are 5% and last 31-56 days. Sources:U.S. CDC. April 3, 2020 Interim Clinical Guidance for Management of Patients with Confirmed Coronavirus Disease (COVID-19). Accessed online. Initial older guidance was also obtained online. Additionally, many people who recover may not be tested, and many who are, may not be tracked due to privacy laws. Thus, the formula used to compute an estimate of active cases is: Active Cases = 100% of new cases in past 14 days + 19% from past 15-30 days + 5% from past 31-56 days - total deaths.We’ve never been inside a pandemic with the ability to learn of new cases as they are confirmed anywhere in the world. After reviewing epidemiological and pandemic scientific literature, three needs arose. We need to specify which portions of the pandemic lifecycle this map cover. The World Health Organization (WHO) specifies six phases. The source data for this map begins just after the beginning of Phase 5: human to human spread and encompasses Phase 6: pandemic phase. Phase six is only characterized in terms of pre- and post-peak. However, these two phases are after-the-fact analyses and cannot ascertained during the event. Instead, we describe (below) a series of five trends for Phase 6 of the COVID-19 pandemic.Choosing terms to describe the five trends was informed by the scientific literature, particularly the use of epidemic, which signifies uncontrolled spread. The five trends are: Emergent, Spreading, Epidemic, Controlled, and End Stage. Not every locale will experience all five, but all will experience at least three: emergent, controlled, and end stage.This layer presents the current trends for the COVID-19 pandemic by country (or appropriate level). There are five trends:Emergent: Early stages of outbreak. Spreading: Early stages and depending on an administrative area’s capacity, this may represent a manageable rate of spread. Epidemic: Uncontrolled spread. Controlled: Very low levels of new casesEnd Stage: No New cases These trends can be applied at several levels of administration: Local: Ex., City, District or County – a.k.a. Admin level 2State: Ex., State or Province – a.k.a. Admin level 1National: Country – a.k.a. Admin level 0Recommend that at least 100,000 persons be represented by a unit; granted this may not be possible, and then the case rate per 100,000 will become more important.Key Concepts and Basis for Methodology: 10 Total Cases minimum threshold: Empirically, there must be enough cases to constitute an outbreak. Ideally, this would be 5.0 per 100,000, but not every area has a population of 100,000 or more. Ten, or fewer, cases are also relatively less difficult to track and trace to sources. 21 Days of Cases minimum threshold: Empirically based on COVID-19 and would need to be adjusted for any other event. 21 days is also the minimum threshold for analyzing the “tail” of the new cases curve, providing seven cases as the basis for a likely trend (note that 21 days in the tail is preferred). This is the minimum needed to encompass the onset and duration of a normal case (5-7 days plus 10-14 days). Specifically, a median of 5.1 days incubation time, and 11.2 days for 97.5% of cases to incubate. This is also driven by pressure to understand trends and could easily be adjusted to 28 days. Source used as basis:Stephen A. Lauer, MS, PhD *; Kyra H. Grantz, BA *; Qifang Bi, MHS; Forrest K. Jones, MPH; Qulu Zheng, MHS; Hannah R. Meredith, PhD; Andrew S. Azman, PhD; Nicholas G. Reich, PhD; Justin Lessler, PhD. 2020. The Incubation Period of Coronavirus Disease 2019 (COVID-19) From Publicly Reported Confirmed Cases: Estimation and Application. Annals of Internal Medicine DOI: 10.7326/M20-0504.New Cases per Day (NCD) = Measures the daily spread of COVID-19. This is the basis for all rates. Back-casting revisions: In the Johns Hopkins’ data, the structure is to provide the cumulative number of cases per day, which presumes an ever-increasing sequence of numbers, e.g., 0,0,1,1,2,5,7,7,7, etc. However, revisions do occur and would look like, 0,0,1,1,2,5,7,7,6. To accommodate this, we revised the lists to eliminate decreases, which make this list look like, 0,0,1,1,2,5,6,6,6.Reporting Interval: In the early weeks, Johns Hopkins' data provided reporting every day regardless of change. In late April, this changed allowing for days to be skipped if no new data was available. The day was still included, but the value of total cases was set to Null. The processing therefore was updated to include tracking of the spacing between intervals with valid values.100 News Cases in a day as a spike threshold: Empirically, this is based on COVID-19’s rate of spread, or r0 of ~2.5, which indicates each case will infect between two and three other people. There is a point at which each administrative area’s capacity will not have the resources to trace and account for all contacts of each patient. Thus, this is an indicator of uncontrolled or epidemic trend. Spiking activity in combination with the rate of new cases is the basis for determining whether an area has a spreading or epidemic trend (see below). Source used as basis:World Health Organization (WHO). 16-24 Feb 2020. Report of the WHO-China Joint Mission on Coronavirus Disease 2019 (COVID-19). Obtained online.Mean of Recent Tail of NCD = Empirical, and a COVID-19-specific basis for establishing a recent trend. The recent mean of NCD is taken from the most recent fourteen days. A minimum of 21 days of cases is required for analysis but cannot be considered reliable. Thus, a preference of 42 days of cases ensures much higher reliability. This analysis is not explanatory and thus, merely represents a likely trend. The tail is analyzed for the following:Most recent 2 days: In terms of likelihood, this does not mean much, but can indicate a reason for hope and a basis to share positive change that is not yet a trend. There are two worthwhile indicators:Last 2 days count of new cases is less than any in either the past five or 14 days. Past 2 days has only one or fewer new cases – this is an extremely positive outcome if the rate of testing has continued at the same rate as the previous 5 days or 14 days. Most recent 5 days: In terms of likelihood, this is more meaningful, as it does represent at short-term trend. There are five worthwhile indicators:Past five days is greater than past 2 days and past 14 days indicates the potential of the past 2 days being an aberration. Past five days is greater than past 14 days and less than past 2 days indicates slight positive trend, but likely still within peak trend time frame.Past five days is less than the past 14 days. This means a downward trend. This would be an

Note: Note: Starting October 10th, 2025 this dataset is deprecated and is no longer being updated. As of April 27, 2023 updates changed from daily to weekly.

Summary The rate of confirmed COVID-19 cases among Marylanders per 100,000 people statewide.

Description The MD COVID-19 cases per 100K population, statewide layer is the rate of confirmed daily COVID-19 cases among Marylanders per 100,000 people statewide. This rate is a 7-day average, calculated using the sum of the CasesByCounty layer and the 2019 estimated county populations (Maryland Department of Planning).

Terms of Use The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

Based on a comparison of coronavirus deaths in 210 countries relative to their population, Peru had the most losses to COVID-19 up until July 13, 2022. As of the same date, the virus had infected over 557.8 million people worldwide, and the number of deaths had totaled more than 6.3 million. Note, however, that COVID-19 test rates can vary per country. Additionally, big differences show up between countries when combining the number of deaths against confirmed COVID-19 cases. The source seemingly does not differentiate between "the Wuhan strain" (2019-nCOV) of COVID-19, "the Kent mutation" (B.1.1.7) that appeared in the UK in late 2020, the 2021 Delta variant (B.1.617.2) from India or the Omicron variant (B.1.1.529) from South Africa.

The difficulties of death figures

This table aims to provide a complete picture on the topic, but it very much relies on data that has become more difficult to compare. As the coronavirus pandemic developed across the world, countries already used different methods to count fatalities, and they sometimes changed them during the course of the pandemic. On April 16, for example, the Chinese city of Wuhan added a 50 percent increase in their death figures to account for community deaths. These deaths occurred outside of hospitals and went unaccounted for so far. The state of New York did something similar two days before, revising their figures with 3,700 new deaths as they started to include “assumed” coronavirus victims. The United Kingdom started counting deaths in care homes and private households on April 29, adjusting their number with about 5,000 new deaths (which were corrected lowered again by the same amount on August 18). This makes an already difficult comparison even more difficult. Belgium, for example, counts suspected coronavirus deaths in their figures, whereas other countries have not done that (yet). This means two things. First, it could have a big impact on both current as well as future figures. On April 16 already, UK health experts stated that if their numbers were corrected for community deaths like in Wuhan, the UK number would change from 205 to “above 300”. This is exactly what happened two weeks later. Second, it is difficult to pinpoint exactly which countries already have “revised” numbers (like Belgium, Wuhan or New York) and which ones do not. One work-around could be to look at (freely accessible) timelines that track the reported daily increase of deaths in certain countries. Several of these are available on our platform, such as for Belgium, Italy and Sweden. A sudden large increase might be an indicator that the domestic sources changed their methodology.

Where are these numbers coming from?

The numbers shown here were collected by Johns Hopkins University, a source that manually checks the data with domestic health authorities. For the majority of countries, this is from national authorities. In some cases, like China, the United States, Canada or Australia, city reports or other various state authorities were consulted. In this statistic, these separately reported numbers were put together. For more information or other freely accessible content, please visit our dedicated Facts and Figures page.

This dataset contains daily data trackers for the COVID-19 pandemic, aggregated by month and starting 18.3.20. The first release of COVID-19 data on this platform was on 1.6.20. Updates have been provided on a quarterly basis throughout 2023/24. No updates are currently scheduled for 2024/25 as case rates remain low. The data is accurate as at 8.00 a.m. on 8.4.24. Some narrative for the data covering the latest period is provided here below: Diagnosed cases / episodes • As at 3.4.24 CYC residents have had a total 75,556 covid episodes since the start of the pandemic, a rate of 37,465 per 100,000 of population (using 2021 Mid-Year Population estimates). The cumulative rate in York is similar to the national (37,305) and regional (37,059) averages. • The latest rate of new Covid cases per 100,000 of population for the period 28.3.24 to 3.4.24 in York was 1.49 (3 cases). The national and regional averages at this date were 1.67 and 2.19 respectively (using data published on Gov.uk on 5.4.24).

NOTE: This dataset has been retired and marked as historical-only.

This dataset is a companion to the COVID-19 Daily Cases and Deaths dataset (https://data.cityofchicago.org/d/naz8-j4nc). The major difference in this dataset is that the case, death, and hospitalization corresponding rates per 100,000 population are not those for the single date indicated. They are rolling averages for the seven-day period ending on that date. This rolling average is used to account for fluctuations that may occur in the data, such as fewer cases being reported on weekends, and small numbers. The intent is to give a more representative view of the ongoing COVID-19 experience, less affected by what is essentially noise in the data.

All rates are per 100,000 population in the indicated group, or Chicago, as a whole, for “Total” columns.

Only Chicago residents are included based on the home address as provided by the medical provider.

Cases with a positive molecular (PCR) or antigen test are included in this dataset. Cases are counted based on the date the test specimen was collected. Deaths among cases are aggregated by day of death. Hospitalizations are reported by date of first hospital admission. Demographic data are based on what is reported by medical providers or collected by CDPH during follow-up investigation.

Denominators are from the U.S. Census Bureau American Community Survey 1-year estimate for 2018 and can be seen in the Citywide, 2018 row of the Chicago Population Counts dataset (https://data.cityofchicago.org/d/85cm-7uqa).

All data are provisional and subject to change. Information is updated as additional details are received and it is, in fact, very common for recent dates to be incomplete and to be updated as time goes on. At any given time, this dataset reflects cases and deaths currently known to CDPH.

Numbers in this dataset may differ from other public sources due to definitions of COVID-19-related cases and deaths, sources used, how cases and deaths are associated to a specific date, and similar factors.

Data Source: Illinois National Electronic Disease Surveillance System, Cook County Medical Examiner’s Office, U.S. Census Bureau American Community Survey

Context

From World Health Organization - On 31 December 2019, WHO was alerted to several cases of pneumonia in Wuhan City, Hubei Province of China. The virus did not match any other known virus. This raised concern because when a virus is new, we do not know how it affects people.

So daily level information on the affected people can give some interesting insights when it is made available to the broader data science community.

The European Centre for Disease Prevention and Control released historical data (to 14 December 2020) on the daily number of new reported COVID-19 cases and deaths worldwide.

Content

The attributes of the dataset are the following: 1) dateRep: Date of the report

2) year_week: Week of the year

3) cases_weekly: Number of cases during the week

4) deaths_weekly: Number of deaths during the week

5) countriesAndTerritories: Country/Territory where the data was reported

6) geoId: Country/Territory id

7) countryterritoryCode: Country/Territory code

8) popData2019: Population data of the Country/Territory in 2019

9) continentExp: Continent of the Country/Territory

10) notification_rate_per_100000_population_14-days: 14-day cumulative number of reported COVID-19 cases per 100 000 population

Disclaimer: Population data in the database is taken from Eurostat for Europe and the World Bank for the rest of the world. Disclaimer: Countries that are not listed in these databases have reported no cases to WHO and no cases were identified in the public domain. The formula to calculate the 14-day cumulative number of reported COVID-19 cases per 100 000 population is (New cases over 14 day period)/Population)*100 000.

Acknowledgements

Data obtained from the European Centre for Disease Prevention and Control, an agency of the European Union

Load data into R

#these libraries need to be loaded library(utils) #read the Dataset sheet into “R”. The dataset will be called "data". data <- read.csv("data.csv", na.strings = "", fileEncoding = "UTF-8-BOM")

On October 20, 2022, CDC began retrieving aggregate case and death data from jurisdictional and state partners weekly instead of daily. This dataset contains archived historical community transmission and related data elements by county. Although these data will continue to be publicly available, this dataset has not been updated since October 20, 2022. An archived dataset containing weekly historical community transmission data by county can also be found here: Weekly COVID-19 County Level of Community Transmission Historical Changes | Data | Centers for Disease Control and Prevention (cdc.gov).

Related data CDC has been providing the public with two versions of COVID-19 county-level community transmission level data: this historical dataset with the daily county-level transmission data from January 22, 2020, and a dataset with the daily values as originally posted on the COVID Data Tracker. Similar to this dataset, the original dataset with daily data as posted is archived on 10/20/2022. It will continue to be publicly available but will no longer be updated. A new dataset containing community transmission data by county as originally posted is now published weekly and can be found at: Weekly COVID-19 County Level of Community Transmission as Originally Posted | Data | Centers for Disease Control and Prevention (cdc.gov).

This public use dataset has 7 data elements reflecting historical data for community transmission levels for all available counties and jurisdictions. It contains historical data for the county level of community transmission and includes updated data submitted by states and jurisdictions. Each day, the dataset was updated to include the most recent days’ data and incorporate any historical changes made by jurisdictions. This dataset includes data since January 22, 2020. Transmission level is set to low, moderate, substantial, or high using the calculation rules below.

Methods for calculating county level of community transmission indicator The County Level of Community Transmission indicator uses two metrics: (1) total new COVID-19 cases per 100,000 persons in the last 7 days and (2) percentage of positive SARS-CoV-2 diagnostic nucleic acid amplification tests (NAAT) in the last 7 days. For each of these metrics, CDC classifies transmission values as low, moderate, substantial, or high (below and here). If the values for each of these two metrics differ (e.g., one indicates moderate and the other low), then the higher of the two should be used for decision-making.

CDC core metrics of and thresholds for community transmission levels of SARS-CoV-2

Total New Case Rate Metric: "New cases per 100,000 persons in the past 7 days" is calculated by adding the number of new cases in the county (or other administrative level) in the last 7 days divided by the population in the county (or other administrative level) and multiplying by 100,000. "New cases per 100,000 persons in the past 7 days" is considered to have transmission level of Low (0-9.99); Moderate (10.00-49.99); Substantial (50.00-99.99); and High (greater than or equal to 100.00).

Test Percent Positivity Metric: "Percentage of positive NAAT in the past 7 days" is calculated by dividing the number of positive tests in the county (or other administrative level) during the last 7 days by the total number of tests resulted over the last 7 days. "Percentage of positive NAAT in the past 7 days" is considered to have transmission level of Low (less than 5.00); Moderate (5.00-7.99); Substantial (8.00-9.99); and High (greater than or equal to 10.00).

If the two metrics suggest different transmission levels, the higher level is selected. If one metric is missing, the other metric is used for the indicator.

The reported transmission categories include:

Low Transmission Threshold: Counties with fewer than 10 total cases per 100,000 population in the past 7 days, and a NAAT percent test positivity in the past 7 days below 5%;

Moderate Transmission Threshold: Counties with 10-49 total cases per 100,000 population in the past 7 days or a NAAT test percent positivity in the past 7 days of 5.0-7.99%;

Substantial Transmission Threshold: Counties with 50-99 total cases per 100,000 population in the past 7 days or a NAAT test percent positivity in the past 7 days of 8.0-9.99%;

High Transmission Threshold: Counties with 100 or more total cases per 100,000 population in the past 7 days or a NAAT test percent positivity in the past 7 days of 10.0% or greater.

Blank: total new cases in the past 7 days are not reported (county data known to be unavailable) and the percentage of positive NAATs tests during the past 7 days (blank) are not reported.

Data Suppression To prevent the release of data that could be used to identify people, data cells are suppressed for low frequency. When the case counts used to calculate the total new case rate metric ("cases_per_100K_7_day_count_change") is greater than zero and less than 10, this metric is set to "suppressed" to protect individual privacy. If the case count is 0, the total new case rate metric is still displayed.

The data in this dataset are considered provisional by CDC and are subject to change until the data are reconciled and verified with the state and territorial data providers. This datasets are created using CDC’s Policy on Public Health Research and Nonresearch Data Management and Access.

Duplicate Records Issue A bug was found on 12/28/2021 that caused many records in the dataset to be duplicated. This issue was resolved on 01/06/2022.

Note: Starting April 27, 2023 updates change from daily to weekly. Summary The rate of confirmed COVID-19 cases among Marylanders per 100,000 people statewide. Description The MD COVID-19 cases per 100K population, statewide layer is the rate of confirmed daily COVID-19 cases among Marylanders per 100,000 people statewide. This rate is a 7-day average, calculated using the sum of the CasesByCounty layer and the 2019 estimated county populations (Maryland Department of Planning). Terms of Use The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

On October 20, 2022, CDC began retrieving aggregate case and death data from jurisdictional and state partners weekly instead of daily. This dataset contains archived community transmission and related data elements by county as originally displayed on the COVID Data Tracker. Although these data will continue to be publicly available, this dataset has not been updated since October 20, 2022. An archived dataset containing weekly community transmission data by county as originally posted can also be found here: Weekly COVID-19 County Level of Community Transmission as Originally Posted | Data | Centers for Disease Control and Prevention (cdc.gov).

Related data CDC has been providing the public with two versions of COVID-19 county-level community transmission level data: this dataset with the daily values as originally posted on the COVID Data Tracker, and an historical dataset with daily data as well as the updates and corrections from state and local health departments. Similar to this dataset, the original historical dataset is archived on 10/20/2022. It will continue to be publicly available but will no longer be updated. A new dataset containing historical community transmission data by county is now published weekly and can be found at: Weekly COVID-19 County Level of Community Transmission Historical Changes | Data | Centers for Disease Control and Prevention (cdc.gov).

This public use dataset has 7 data elements reflecting community transmission levels for all available counties and jurisdictions. It contains reported daily transmission levels at the county level with the same values used to display transmission maps on the COVID Data Tracker. Each day, the dataset is appended to contain the most recent day's data. Transmission level is set to low, moderate, substantial, or high using the calculation rules below.

Methods for calculating county level of community transmission indicator The County Level of Community Transmission indicator uses two metrics: (1) total new COVID-19 cases per 100,000 persons in the last 7 days and (2) percentage of positive SARS-CoV-2 diagnostic nucleic acid amplification tests (NAAT) in the last 7 days. For each of these metrics, CDC classifies transmission values as low, moderate, substantial, or high (below and here). If the values for each of these two metrics differ (e.g., one indicates moderate and the other low), then the higher of the two should be used for decision-making.

CDC core metrics of and thresholds for community transmission levels of SARS-CoV-2

Total New Case Rate Metric: "New cases per 100,000 persons in the past 7 days" is calculated by adding the number of new cases in the county (or other administrative level) in the last 7 days divided by the population in the county (or other administrative level) and multiplying by 100,000. "New cases per 100,000 persons in the past 7 days" is considered to have a transmission level of Low (0-9.99); Moderate (10.00-49.99); Substantial (50.00-99.99); and High (greater than or equal to 100.00).

Test Percent Positivity Metric: "Percentage of positive NAAT in the past 7 days" is calculated by dividing the number of positive tests in the county (or other administrative level) during the last 7 days by the total number of tests conducted over the last 7 days. "Percentage of positive NAAT in the past 7 days" is considered to have a transmission level of Low (less than 5.00); Moderate (5.00-7.99); Substantial (8.00-9.99); and High (greater than or equal to 10.00).

If the two metrics suggest different transmission levels, the higher level is selected.

The reported transmission categories include:

Low Transmission Threshold: Counties with fewer than 10 total cases per 100,000 population in the past 7 days, and a NAAT percent test positivity in the past 7 days below 5%;

Moderate Transmission Threshold: Counties with 10-49 total cases per 100,000 population in the past 7 days or a NAAT test percent positivity in the past 7 days of 5.0-7.99%;

Substantial Transmission Threshold: Counties with 50-99 total cases per 100,000 population in the past 7 days or a NAAT test percent positivity in the past 7 days of 8.0-9.99%;

High Transmission Threshold: Counties with 100 or more total cases per 100,000 population in the past 7 days or a NAAT test percent positivity in the past 7 days of 10.0% or greater.

Blank: total new cases in the past 7 days are not reported (county data known to be unavailable) and the percentage of positive NAATs tests during the past 7 days (blank) are not reported.

Data Suppression To prevent the release of data that could be used to identify people, data cells are suppressed for low frequency. When the case counts used to calculate the total new case rate metric ("cases_per_100K_7_day_count_change") is greater than zero and less than 10, this metric is set to "suppressed" to protect individual privacy. If the case count is 0, the total new case rate metric is still displayed.

The data in this dataset are considered provisional by CDC and are subject to change until the data are reconciled and verified with the state and territorial data providers. This dataset is created using CDC’s Policy on Public Health Research and Nonresearch Data Management and Access.

As of March 13, Austria had the highest rate of coronavirus (COVID-19) cases reported in the previous seven days in Europe at 224 cases per 100,000. Luxembourg and Slovenia have recorded 122 and 108 cases per 100,000 people respectively in the past week. Furthermore, San Marino had a rate of 97 cases in the last seven days.
Since the pandemic outbreak, France has been the worst affected country in Europe with over 38.3 million cases as of January 13. The overall incidence of cases in every European country can be found here.

For further information about the coronavirus pandemic, please visit our dedicated Facts and Figures page.

Context

This is the US Coronavirus data repository from The New York Times . This data includes COVID-19 cases and deaths reported by state and county. The New York Times compiled this data based on reports from state and local health agencies. More information on the data repository is available here . For additional reporting and data visualizations, see The New York Times’ U.S. coronavirus interactive site

Sample Queries

Query 1

Which US counties have the most confirmed cases per capita? This query determines which counties have the most cases per 100,000 residents. Note that this may differ from similar queries of other datasets because of differences in reporting lag, methodologies, or other dataset differences.

SELECT covid19.county, covid19.state_name, total_pop AS county_population, confirmed_cases, ROUND(confirmed_cases/total_pop *100000,2) AS confirmed_cases_per_100000, deaths, ROUND(deaths/total_pop *100000,2) AS deaths_per_100000 FROM bigquery-public-data.covid19_nyt.us_counties covid19 JOIN bigquery-public-data.census_bureau_acs.county_2017_5yr acs ON covid19.county_fips_code = acs.geo_id WHERE date = DATE_SUB(CURRENT_DATE(),INTERVAL 1 day) AND covid19.county_fips_code != "00000" ORDER BY confirmed_cases_per_100000 desc

Query 2

How do I calculate the number of new COVID-19 cases per day? This query determines the total number of new cases in each state for each day available in the dataset SELECT b.state_name, b.date, MAX(b.confirmed_cases - a.confirmed_cases) AS daily_confirmed_cases FROM (SELECT state_name AS state, state_fips_code , confirmed_cases, DATE_ADD(date, INTERVAL 1 day) AS date_shift FROM bigquery-public-data.covid19_nyt.us_states WHERE confirmed_cases + deaths > 0) a JOIN bigquery-public-data.covid19_nyt.us_states b ON a.state_fips_code = b.state_fips_code AND a.date_shift = b.date GROUP BY b.state_name, date ORDER BY date desc

Listing of Washoe County COVID-19 case data, by day posted to public dashboard. This table is based on best available information from the Washoe County Health District. Not all fields are populated for all dates.Name FieldName FieldType Comment

OBJECTID OBJECTID ObjectID System generated unique ID

Date Reported reportdt Date Effective date of this row of data

Confirmed confirmed Integer Total number of confirmed cases to date

Recovered recovered Integer Number of recoveries to date

Deaths deaths Integer Number of deaths to date

Active active Integer Current number of active cases

Male Male Small Integer Total confirmed cases to date: Male

Female Female Small Integer Total confirmed cases to date: Female

OtherGender GenderOther Small Integer Total confirmed cases to date: OtherGender

Total Cases 0-9 Age0to9 Small Integer Total confirmed cases to date: Total Cases 0-9

Total Cases 10-19 Age10to19 Small Integer Total confirmed cases to date: Total Cases 10-19

Total Cases 20-29 Age20to29 Small Integer Total confirmed cases to date: Total Cases 20-29

Total Cases 30-39 Age30to39 Small Integer Total confirmed cases to date: Total Cases 30-39

Total Cases 40-49 Age40to49 Small Integer Total confirmed cases to date: Total Cases 40-49

Total Cases 50-59 Age50to59 Small Integer Total confirmed cases to date: Total Cases 50-59

Total Cases 60-69 Age60to69 Small Integer Total confirmed cases to date: Total Cases 60-69

Total Cases 70-79 Age70to79 Small Integer Total confirmed cases to date: Total Cases 70-79

Total Cases 80-89 Age80to89 Small Integer Total confirmed cases to date: Total Cases 80-89

Total Cases 90-99 Age90to99 Small Integer Total confirmed cases to date: Total Cases 90-99

Total Cases 100+ Age100plus Small Integer Total confirmed cases to date: Total Cases 100+

UnknownAge AgeNA Small Integer Total confirmed cases to date: UnknownAge

Native American E_NativeAmerican Integer Total Cases to date: Native American

Asian E_Asian Integer Total Cases to date: Asian

African American E_Black Integer Total Cases to date: African American

Hispanic E_Hispanic Integer Total Cases to date: Hispanic

Hawaiian or Pacific Islander E_HawaiianPacific Integer Total Cases to date: Hawaiian or Pacific Islander

Caucasian E_White Integer Total Cases to date: Caucasian

Multiple E_Multiple Integer Total Cases to date: Multiple

OtherEthnicity E_Other Integer Total Cases to date: OtherEthnicity

EthnicityUnknown E_Unknown Integer Total Cases to date: EthnicityUnknown

New Cases 7 Day Moving Average NewCases7DMA Double Average New Cases over last 7 days

NewCases NewCases Integer New Cases in last day

ActiveCasesAge0to9per100K Age0to9_100K Double Active Cases per 100,000: Age0to9

ActiveCasesAge10to19per100K Age10to19_100K Double Active Cases per 100,000: Age10to19

ActiveCasesAge20to29per100K Age20to29_100K Double Active Cases per 100,000: Age20to29

ActiveCasesAge30to39per100K Age30to39_100K Double Active Cases per 100,000: Age30to39

ActiveCasesAge40to49per100K Age40to49_100K Double Active Cases per 100,000: Age40to49

ActiveCasesAge50to59per100K Age50to59_100K Double Active Cases per 100,000: Age50to59

ActiveCasesAge60to69per100K Age60to69_100K Double Active Cases per 100,000: Age60to69

ActiveCasesAge70to79per100K Age70to79_100K Double Active Cases per 100,000: Age70to79

ActiveCasesAge80to89per100K Age80to89_100K Double Active Cases per 100,000: Age80to89

ActiveCasesAge90to99per100K Age90to99_100K Double Active Cases per 100,000: Age90to99

ActiveCasesAge100plusper100K Age100plus_100K Double Active Cases per 100,000: Age100plus

TO DOWNLOAD THE DATASET, CLICK ON THE "Download" BUTTON

This is a daily updated dataset of COVID-19 deaths around the world. The dataset contains data of 45 countries. This data was collected from

• The New York Times
• The Economist

us-counties.csv contains data of the daily number of new cases and deaths, the seven-day rolling average and the seven-day rolling average per 100,000 residents of US at county level. The average reported is the seven day trailing average i.e. average of the day reported and six days prior.

all_weekly_excess_deaths.csv collates detailed weekly breakdowns from official sources around the world.

Image credits: Unsplash - schluditsch

Let's pray for the ones who lost their lives fighting the battle and for the ones who risk their lives against this virus 🙏

On March 1, 2023, exactly 12,291 new cases of coronavirus (COVID-19) were reported in South Korea. South Korea's handling of the coronavirus (COVID-19) was initially widely praised, though the government's handling of vaccine distribution has been criticized. Seoul and the metropolitan areas were hit especially hard by a few group infections during the second wave in August 2020. This was followed by a fourth wave, driven by the delta variant and low vaccination rates, leading to rising figures. Though the country has since achieved high vaccination rates, the omicron variant led to record new daily cases. Cases once again began to decline in January of 2023.

For further information about the coronavirus (COVID-19) pandemic, please visit our dedicated Facts and Figures page.